Fenamates Inhibit Human Sodium Channel Nav1.2 and Protect Glutamate-Induced Injury in SH-SY5Y Cells.

Voltage-gated sodium channels are crucial mediators of neuronal damage in ischemic and excitotoxicity disease models. Fenamates have been reported to have anti-inflammatory properties following a decrease in prostaglandin synthesis. Several researches showed that fenamates appear to be ion channel modulators and potential neuroprotectants. In this study, the neuroprotective effects of tolfenamic acid, flufenamic acid, and mefenamic acid were tested by glutamate-induced injury in SH-SY5Y cells. Following this, fenamates' effects were examined on both the expression level and the function of hNav1.1 and hNav1.2, which were closely associated with neuroprotection, using Western blot and patch clamp. Finally, the effect of fenamates on the expression of apoptosis-related proteins in SH-SY5Y cells was examined. The results showed that both flufenamic acid and mefenamic acid exhibited neuroprotective effects against glutamate-induced injury in SH-SY5Y cells. They inhibited peak currents of both hNav1.1 and hNav1.2. However, fenamates exhibited decreased inhibitory effects on hNav1.1 when compared to hNav1.2. Correspondingly, the inhibitory effect of fenamates was found to be consistent with the level of neuroprotective effects in vitro. Fenamates inhibited glutamate-induced apoptosis through the modulation of the Bcl-2/Bax-dependent cell death pathways. Taken together, Nav1.2 might play a part in fenamates' neuroprotection mechanism. Nav1.2 and NMDAR might take part in the neuroprotection mechanism of the fenamates. The fenamates inhibited glutamate-induced apoptosis through modulation of the Bcl-2/Bax-dependent cell death pathways.

A mutant of the Buthus martensii Karsch antitumor-analgesic peptide exhibits reduced inhibition to hNav1.4 and hNav1.5 channels while retaining analgesic activity.

Scorpion toxins can kill other animals by inducing paralysis and arrhythmia, which limits the potential applications of these agents in the clinical management of diseases. Antitumor-analgesic peptide (AGAP), purified from Buthus martensii Karsch, has been proved to possess analgesic and antitumor activities. Trp38, a conserved aromatic residue of AGAP, might play an important role in mediating AGAP activities according to the sequence and homology-modeling analyses. Therefore, an AGAP mutant, W38G, was generated, and effects of both AGAP and the mutant W38G were examined by whole-cell patch clamp techniques on the sodium channels hNav1.4 and hNav1.5, which were closely associated with the biotoxicity of skeletal and cardiac muscles, respectively. The data showed that both W38G and AGAP inhibited the peak currents of hNav1.4 and hNav1.5; however, W38G induced a much weaker inhibition of both channels than AGAP. Accordingly, W38G exhibited much less toxic effect on both skeletal and cardiac muscles than AGAP in vivo The analgesic activity of W38G and AGAP were verified in vivo as well, and W38G retained analgesic activity similar to AGAP. Inhibition to both Nav1.7 and Nav1.8 was involved in the analgesic mechanism of AGAP and W38G. These findings indicated that Trp38 was a key amino acid involved in the biotoxicity of AGAP, and the AGAP mutant W38G might be a safer alternative for clinical application because it retains the analgesic efficacy with less toxicity to skeletal and cardiac muscles.

The relationship between major life events and non-suicidal self-injury among college students: the effect of rumination and body image.

Background: Non-suicidal self-injury (NSSI) poses a growing risk to public health worldwide. While numerous studies have identified major life events as key risk factors for NSSI, the mechanisms by which emotional and cognitive problems mediate or moderate this relationship remain unclear. To enhance the understanding of this field, we will draw upon the cascade theory of self-injury and the benefits and barriers model, to examine the relationship between major life events and NSSI, as well as the effect of rumination and body image. Methods: A sample of 2,717 college students (Mage = 19.81 years; SD = 1.09) participated in this study and anonymously completed the questionnaires. The moderated mediation model were conducted using Model 4 and Model 15 of the Process macro program in SPSS. Results: The results showed that rumination mediated the positive relationship between major life events and NSSI. Furthermore, body image was found to moderate both the relationship between major life events and NSSI, as well as the relationship between rumination and NSSI. Conclusion: The current findings suggest that rumination is an important mediator in the relationship between major life events and NSSI among college students. Teachers, parents, and researchers should recognize the important role of body image self-perceptions of college students and actively promote a healthy and accurate body image.

Stratified analysis of multiple management of gastric cancer: A population-based study of incidence, mortality and DALY.

The aim was to illuminate the difference in incidence, mortality, and disability-adjusted life-years (DALYs) of gastric cancer (GC) between the United States of America (US) and China. The multiple management was analyzed with stratification to explore an effective survival improvement strategy. The Global Burden of Disease Study data was analyzed to assess GC morbidity, mortality and DALYs from 1990 to 2019 in the US and China. The age-period-cohort model was established to generate estimation of metrics. Verification was completed and stratified analysis of the multiple management was performed by accessing data of Surveillance, Epidemiology, and End Results database in 1992 to 2019. Continuous downtrends in GC incidence, mortality and DALYs from 1990 to 2019 and persistent uptrends in 1-, 3-year survival from 1992 to 2019 were observed in the US population. In the Chinese population, the overall trends of incidence, mortality and DALYs decreased with a fluctuating manner. The lower overall survival rates were observed in elderly, unmarried patients, distant disease and poor grade, as well as patients lacking of medical treatment (P < .05). In stratified analyses, single local therapy decreased and the other modalities increased over time across different stages. Moreover, combined treatment and single systemic therapy decreased, but single local and conservative therapy increased with age. The study quantified the incidence, GC-specific mortality and DALYs in the US and China and estimated stage profiles, 1- and 3-year survival in the US. The heavy burden on later-onset GC (>70) and potential increase on early-onset GC (<40) needed to be addressed. Combined modalities and single chemotherapy were becoming more widely used over time, however, their uses decreased with age because of poor physical fitness. Our findings provide new insights into management tailoring appropriately to specific subgroups contributes to the increasing survival rate.

Functional thermoplastics from linear diols and diisocyanates produced entirely from renewable lipid sources.

An unsaturated terminal diol, 1,18-octadec-9-endiol (ODEDO), and a saturated terminal diol, 1,9-nonanediol (NDO), were synthesized from oleic acid. The feasibility of utilizing these new diols for the production of thermoplastic polyurethanes (TPUs) was demonstrated by reacting them with a fatty acid-derived diisocyanate, 1,7-heptamethylene diisocyanate (HPMDI), and a commercially available petroleum-derived diisocyanate, 1,6-hexamethylene diisocyanate (HDI). One type of phase structure was obtained for both TPUs in this study, owing to the similarity between the ODEDO and NDO molecular structure. In addition, double yielding behavior (observed for the first time in polyurethanes) was observed in the stress-strain curves for both TPU systems. Compared to the TPUs prepared from HDI, the totally biobased TPUs (ODEDO-NDO-HPDMI) demonstrated comparable properties within acceptable tolerances, considering the impacts on physical properties due to the odd-even effect introduced by the HPDMI. This work is the first that establishes the production of linear thermoplastic polyurethanes entirely from lipid feedstock.

Trp: a conserved aromatic residue crucial to the interaction of a scorpion peptide with sodium channels.

Anti-tumour-analgesic peptide (AGAP), one scorpion toxin purified from Buthus martensii Karsch, was known as its analgesic and anti-tumour activities. Trp38, a conserved aromatic residue of AGAP, might play important roles in its interaction with sodium channels. In this study, a mutant W38F was generated and effects of W38F were examined on hNav1.4, hNav1.5 and hNav1.7 by using whole-cell patch-clamp, which were closely associated to the biotoxicity of skeletal and cardiac muscles and pain signalling. The data showed that W38F decreased the inhibition effects of peak currents of hNav1.7, hNav1.4 and hNav1.5 compared with AGAP, notably, W38F reduced the analgesic activity compared with AGAP. The results suggested that Trp38 be a crucial amino acid involved in the interaction with these three sodium channels. The decreased analgesic activity of W38F might result from its much less inhibition of hNav1.7. These findings provided more information about the relationship between structure and function of AGAP and may facilitate the modification of other scorpion toxins with pharmacological effects.

Fatty acid-derived diisocyanate and biobased polyurethane produced from vegetable oil: synthesis, polymerization, and characterization.

A new linear saturated terminal diisocyanate was synthesized from oleic acid via Curtius rearrangement, and its chemical structure was identified by FTIR, (1)H and (13)C NMR, and MS. The feasibility of utilizing this new diisocyanate for the production of polyurethanes (PUs) was demonstrated by reacting it with commercial petroleum-derived polyols and canola oil-derived polyols, respectively. The physical properties of the PUs prepared from fatty acid-derived diisocyanate were compared to those prepared from the same polyols with a similar but petroleum-derived commercially available diisocyanate: 1,6-hexamethylene diisocyanate. It was found that the fatty acid-derived diisocyanate was capable of producing PUs with comparable properties within acceptable tolerances. This work is the first that establishes the production of linear saturated terminal diisocyanate derived from fatty acids and corresponding PUs mostly from lipid feedstock.

Diagnostic accuracy of the Xpert MTB/RIF assay for bone and joint tuberculosis: A meta-analysis.

BACKGROUND: This study aimed to evaluate the accuracy of the Xpert MTB/RIF assay for the diagnosis of bone and joint tuberculosis. METHODS: We searched databases from their inception to May 7, 2019 for published articles and reviewed them to assess the accuracy of Xpert MTB/RIF with respect to a composite reference standard (CRS) and mycobacterial culture. Meta-analyses were performed using a bivariate random-effects model, and the sources of heterogeneity were assessed via subgroup analysis and meta-regression. RESULTS: Nineteen independent (9 prospective, 5 retrospective, and 5 case-control) studies that compared Xpert MTB/RIF with the CRS and 14 (6 prospective, 7 retrospective, and 1 case-control) studies that compared it with culture were included. The pooled sensitivity and specificity of Xpert MTB/RIF were 81% (95% confidence interval [CI], 77-84) and 99% (95% CI, 97-100) compared to the CRS, respectively, and 96% (95% CI, 90-98) and 85% (95% CI, 57-96) compared to culture, respectively. The pooled sensitivity and specificity using pus samples vs. the CRS were 82% (95% CI, 76-86) and 99% (95% CI, 95-100), respectively. The proportions obtained while working with tissue samples vs. the CRS were 84% (95% CI, 76-90) and 98% (95% CI, 94-99), respectively. There was no significant difference in diagnostic accuracy among the types of specimens. CONCLUSIONS: Xpert MTB/RIF demonstrates good diagnostic accuracy for bone and joint tuberculosis, the results of which are not related to the type of specimen.

Fenamates inhibit human sodium channel Nav1.7 and Nav1.8.

Fenamates are N-substituted anthranilic acid derivatives, clinically used as nonsteroidal anti-inflammatory drugs (NSAIDs) in fever, pain and inflammation treatments. Previous studies have shown that they are also modulators of diverse ion channels, exhibiting either activation or inhibitory effects. However, the effects of fenamates on sodium channel subtypes are still unknown. In this study, fenamates, including mefenamic acid, flufenamic acid and tolfenamic acid, were examined by whole-cell patch clamp techniques on the sodium channels hNav1.7 and hNav1.8, which are closely associated with pain. The results showed that the mefenamic acid, flufenamic acid, and tolfenamic acid inhibited the peak currents of hNav1.7 and hNav1.8 in CHO cells stably expressing hNav1.7 and hNav1.8. However, much lighter inhibition effects of hNav1.8 were registered in the experimental system. Furthermore, the mefenamic acid, flufenamic acid and tolfenamic acid significantly affected the inactivation processes of hNav1.7 and hNav1.8 with I-V curves left-shifted to hyperpolarized direction. These data indicate that the inhibition effects of Nav1.7 and Nav1.8 by mefenamic acid, flufenamic acid and tolfenamic acid might contribute to their analgesic activity in addition to their inhibition of cyclooxygenase. These findings provide a basis for further studies in the discovery of other potential targets for NSAIDs.

Synthesis and characterization of bis(pyrazolyl)borate Ni(ii) complexes: ligand rearrangement and transformation.

Five examples of bis(pyrazolyl)borate Ni(ii) complexes 2-5, exhibiting C-HNi interactions, were readily prepared from the reactions of K[BBN(3-R1-4-R2-pz)2] with Ni(ii) precursors (Ni(acac)2 or NiCl2(PPh3)2) in dichloromethane or toluene. When R1 = R2 = H, complex 2a with square-planar geometry around the Ni centre and showing an unusual C-HNi anagostic interaction was obtained. In contrast, when R1 = Me, R2 = H or R1 = Me, R2 = Br, tetrahedral complexes 3 or 4 were formed preferentially with strong C-HNi agostic interactions, respectively. Additionally, some differences in the formation and transformation of 3 and 4 were also found including a 1,2-borotropic shift during the formation of 3 and a further geometrical transformation from tetrahedral 3 to square-planar 2b by the second 1,2-borotropic shift under continuous heating; in contrast, no ligand change and further conversion were found in 4. When the more hindered 3-iPr-substituted ligand 1d was introduced in the reaction, the hydrolysis and cleavage of one B-N bond in the ligand occurred, leading to the singly hydroxo-bridged complex 5. The experimental and theoretical results indicate that the preference to form a thermodynamically stable complex and then balancing with orbital energy should be the intrinsic reason for the reaction selectivity.

Sequential interpenetrating polymer networks produced from vegetable oil based polyurethane and poly(methyl methacrylate).

Sequential interpenetrating polymer networks (IPNs) were prepared using polyurethane produced from a canola oil based polyol with primary terminal functional groups and poly(methyl methacrylate) (PMMA). The properties of the material were studied and compared to the IPNs made from commercial castor oil using dynamic mechanical analysis, differential scanning calorimetry, as well as tensile measurements. The morphology of the IPNs was investigated using scanning electron microscopy and transmission electron microscopy. The chemical diversity of the starting materials allowed the evaluation of the effects of dangling chains and graftings on the properties of the IPNs. The polymerization process of canola oil based IPNs was accelerated because of the utilization of polyol with primary functional groups, which efficiently lessened the effect of dangling chains and yielded a higher degree of phase mixing. The mechanical properties of canola oil based IPNs containing more than 75 wt % PMMA were comparable to the corresponding castor oil based IPNs; both were superior to those of the constituent polymers due to the finely divided rubber and plastic combination structures in these IPNs. However, when PMMA content was less than 65 wt %, canola oil based IPNs exhibited a typical mechanical behavior of rigid plastics, whereas castor oil based IPNs showed a typical mechanical behavior of soft rubber. It is proposed that these new IPN materials with high performance prepared from alternative renewable resources can prove to be valuable substitutes for existing materials in various applications.

Physical properties of sequential interpenetrating polymer networks produced from canola oil-based polyurethane and poly(methyl methacrylate).

Sequential interpenetrating polymer networks (IPNs) were prepared using polyurethane (PUR) synthesized from canola oil-based polyol with terminal primary functional groups and poly(methyl methacrylate) (PMMA). The properties of the material were evaluated by dynamic mechanical analysis (DMA), differential scanning calorimetry (DSC), and modulated differential scanning calorimetry (MDSC), as well as tensile properties measurements. The morphology of the IPNs was investigated using scanning electron microscopy (SEM) and MDSC. A five-phase morphology, that is, sol phase, PUR-rich phase, PUR-rich interphase, PMMA-rich interphase, and PMMA-rich phase, was observed for all the IPNs by applying a new quantitative method based on the measurement of the differential of reversing heat capacity versus temperature from MDSC, although not confirmed by SEM, most likely due to resolution restrictions. NCO/OH molar ratios (cross-linking density) and compositional variations of PUR/PMMA both affected the thermal properties and phase behaviors of the IPNs. Higher degrees of mixing occurred for the IPN with higher NCO/OH molar ratio (2.0/1.0) at PUR concentration of 25 wt %, whereas for the IPN with lower NCO/OH molar ratio (1.6/1.0), higher degrees of mixing occurred at PUR concentration of 35 wt %. The mechanical properties of the IPNs were superior to those of the constituent polymers due to the finely divided rubber and plastic combination structures in these IPNs.

Production of 9-hydroxynonanoic Acid from methyl oleate and conversion into lactone monomers for the synthesis of biodegradable polylactones.

The feasibility of a previously established method based on ozonolysis and hydrogenation reactions for the production of 9-hydroxynonanoic acid from oleic acid has been demonstrated. Metal catalyzed lactonization conditions have been used to convert 9-hydroxynonanoic acid into 1,11-dioxacycloicosane-2,12-dione, which is a potential monomer in the synthesis of polylactones. The structure of 9-hydroxynonanoic acid and 1,11-dioxacycloicosane-2,12-dione has been confirmed by 1H NMR, 13C NMR, and FTIR. In addition, 9-hydroxynonanoic acid was analyzed by high-resolution mass spectroscopy and 1,11-dioxacycloicosane-2,12-dione was analyzed by GC-MS. Aliphatic poly(nonanolactones) have been synthesized via ring-opening polymerization of the dilactone. The structure and number average molecular weight (M(n)) of the poly(nonanolactones) have been calculated by 1H NMR and GPC. The physical properties of these poly(nonanolactones) have been characterized by modulated differential scanning calorimetry (MDSC) and thermogravimetric analysis (TGA).

Polyurethane nanocomposites incorporating biobased polyols and reinforced with a low fraction of cellulose nanocrystals.

High solids content polyurethane (PU) nanocomposites with enhanced thermal and mechanical properties were produced by incorporating of low fractions of cellulose nanocrystals (CNC) in a solvent-free process. This involved the use of a simple procedure to produce well dispersed and stable suspensions of CNC in biobased polyols, which were then used to produce PU-CNC nanocomposites. Transmission electron microscopy revealed that individual CNC particles were dispersed homogenously within the PU matrix. FTIR results suggested that CNC particles are covalently bonded to the PU molecular chains during polymerization. The thermal mechanical properties of the nanocomposites are significantly improved over pure PU as indicated by differential scanning calorimetry and dynamic mechanical analysis. Compared to pure PU, the PU nanocomposites made with the addition of only 0.5% of CNC had glass transition temperatures that were 6°C higher, their Young's moduli were about 10% higher and their abrasion resistance was higher by about 25%. The optimal composition contains only 0.5% CNC (w/w) which indicates that there is good potential for utilization of low levels of CNC for reinforcement of PU composites made using biobased polyols.

Physical properties of polyurethane plastic sheets produced from polyols from canola oil.

Polyurethane (PUR) plastic sheets were prepared by reacting polyols synthesized from canola oil with aromatic diphenylmethane diisocyanate. The properties of the material were measured by dynamic mechanical analysis (DMA), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA) as well as tensile properties measurements. The effect of stoichiometric balance (i.e., OH/NCO molar ratio) on the final properties was evaluated. The concentration of elastically active network chains (EANCs), nue, of the polymer networks was calculated using rubber elasticity theory. The glass transition temperatures (Tg) for the plastic sheets with OH/NCO molar ratios of 1.0/1.0, 1.0/1.1, and 1.0/1.2 were found to be 23, 41, and 43 degrees C, respectively. The kinetic studies of the degradation process of the PUR plastics showed three well-defined steps of degradation. The PUR plastic sheets with OH/NCO molar ratio 1.0/1.1 had the highest nue, lowest number-average molecule weight between cross-links, MC, and excellent mechanical properties, indicating that this is the optimum ratio in the PUR formulations.

Physical properties of canola oil based polyurethane networks.

A new generation polyol (generation-II) with significantly higher triol content and higher hydroxyl value was synthesized from canola oil by introducing a mild solvent (ethyl acetate) and a more efficient reductive reagent (zinc) to the previous synthetic procedure (Narine, S. S.; Yue, J.; Kong, X. J. Am. Oil Chem. Soc. 2007, 84, 173-179). Polyurethane (PUR) elastomers were prepared by reacting this type of polyol with aliphatic diisocyanates. The physical and thermal properties of the PUR elastomers were studied using dynamic mechanical analysis (DMA) and differential scanning calorimetry (DSC) and compared to the elastomers made from the old generation polyol (generation-I). The concentration of elastically active network chains (nue) of the polymer networks was calculated based on rubber elasticity theory. Larger nue and narrower distribution of nue was observed in the case of the PURs prepared from the generation-II polyol. The relatively faster relaxation at higher temperature for this type of PUR elastomer, suggests a tighter cross-linked network structure by reducing the dangling chains effect. With the same OH/NCO molar ratio, the PURs prepared from the generation-II polyol showed higher glass transition temperatures (Tg), higher Young's modulus and tensile strength, and longer elongation at break.