Assessing PM2.5 Model Performance for the Conterminous U.S. with Comparison to Model Performance Statistics from 2007-2015.

Previous studies have proposed that model performance statistics from earlier photochemical grid model (PGM) applications can be used to benchmark performance in new PGM applications. A challenge in implementing this approach is that limited information is available on consistently calculated model performance statistics that vary spatially and temporally over the U.S. Here, a consistent set of model performance statistics are calculated by year, season, region, and monitoring network for PM2.5 and its major components using simulations from versions 4.7.1-5.2.1 of the Community Multiscale Air Quality (CMAQ) model for years 2007-2015. The multi-year set of statistics is then used to provide quantitative context for model performance results from the 2015 simulation. Model performance for PM2.5 organic carbon in the 2015 simulation ranked high (i.e., favorable performance) in the multi-year dataset, due to factors including recent improvements in biogenic secondary organic aerosol and atmospheric mixing parameterizations in CMAQ. Model performance statistics for the Northwest region in 2015 ranked low (i.e., unfavorable performance) for many species in comparison to the 2007-2015 dataset. This finding motivated additional investigation that suggests a need for improved speciation of wildfire PM2.5emissions and modeling of boundary layer dynamics near water bodies. Several limitations were identified in the approach of benchmarking new model performance results with previous results. Since performance statistics vary widely by region and season, a simple set of national performance benchmarks (e.g., one or two targets per species and statistic) as proposed previously are inadequate to assess model performance throughout the U.S. Also, trends in model performance statistics for sulfate over the 2007 to 2015 period suggest that model performance for earlier years may not be a useful reference for assessing model performance for recent years in some cases. Comparisons of results from the 2015 base case with results from five sensitivity simulations demonstrated the importance of parameterizations of NH3 surface exchange, organic aerosol volatility and production, and emissions of crustal cations for predicting PM2.5 species concentrations.

Influence of uncertainties in burned area estimates on modeled wildland fire PM2.5 and ozone pollution in the contiguous U.S.

Wildland fires are a major source of fine particulate matter (PM2.5), one of the most harmful ambient pollutants for human health globally. To represent the influence of wildland fire emissions on atmospheric composition, regional and global chemical transport models rely on emission inventories developed from estimates of burned area (i.e. fire size and location). While different methods of estimating annual burned area agree reasonably well in the western U.S. (within 20-30% for most years during 2002-2014), estimates for the southern U.S. can vary by more than a factor of 5. These differences in burned area lead to significant variability in the spatial and temporal allocation of emissions across fire emission inventory platforms. In this work, we implement wildland fire emission estimates for 2011 from three different products - the USEPA National Emission Inventory (NEI), the Fire Inventory of NCAR (FINN), and the Global Fire Emission Database (GFED4s) - into the Community Multiscale Air Quality (CMAQ) model to quantify and characterize differences in simulated PM and ozone concentrations across the contiguous U.S. (CONUS) due to the fire emission inventory used. The NEI is developed specifically for the U.S., while both FINN and GFED4s are available globally. We find that NEI emissions lead to the largest increases in modeled annual average PM2.5 (0.85 µg m-3) and April-September maximum daily 8-h ozone (0.28 ppb) nationally compared to a "no fire" baseline, followed by FINN (0.33 µg m-3 and 0.22 ppb) and GFED4s (0.12 µg m-3 and 0.17 ppb). Annual mean enhancements in wildland fire pollution are highest in the southern U.S. across all three inventories (over 4 µg m-3 and 2 ppb in some areas), but show considerable spatial variability within these regions. We also examine the representation of five individual fire events during 2011 and find that of the two global inventories, FINN reproduces more of the acute changes in pollutant concentrations modeled with NEI and shown in surface observations during each of the episodes investigated compared to GFED4s. Understanding the sensitivity of modeling fire-related PM2.5 and ozone in the U.S. to burned area estimation approaches will inform future efforts to assess the implications of present and future fire activity for air quality and human health at national and global scales.

Burden of Disease from Rising Coal-Fired Power Plant Emissions in Southeast Asia.

Southeast Asia has a very high population density and is on a fast track to economic development, with most of the growth in electricity demand currently projected to be met by coal. From a detailed analysis of coal-fired power plants presently planned or under construction in Southeast Asia, we project in a business-as-usual scenario that emissions from coal in the region will triple to 2.6 Tg a-1 SO2 and 2.6 Tg a-1 NOx by 2030, with the largest increases occurring in Indonesia and Vietnam. Simulations with the GEOS-Chem chemical transport model show large resulting increases in surface air pollution, up to 11 µg m-3 for annual mean fine particulate matter (PM2.5) in northern Vietnam and up to 15 ppb for seasonal maximum 1 h ozone in Indonesia. We estimate 19 880 (11 400-28 400) excess deaths per year from Southeast Asian coal emissions at present, increasing to 69 660 (40 080-126 710) by 2030. 9000 of these excess deaths in 2030 are in China. As Chinese emissions from coal decline in coming decades, transboundary pollution influence from rising coal emissions in Southeast Asia may become an increasing issue.

Future fire emissions associated with projected land use change in Sumatra.

Indonesia has experienced rapid land use change over the last few decades as forests and peatswamps have been cleared for more intensively managed land uses, including oil palm and timber plantations. Fires are the predominant method of clearing and managing land for more intensive uses, and the related emissions affect public health by contributing to regional particulate matter and ozone concentrations and adding to global atmospheric carbon dioxide concentrations. Here, we examine emissions from fires associated with land use clearing and land management on the Indonesian island of Sumatra and the sensitivity of this fire activity to interannual meteorological variability. We find ~80% of 2005-2009 Sumatra emissions are associated with degradation or land use maintenance instead of immediate land use conversion, especially in dry years. We estimate Sumatra fire emissions from land use change and maintenance for the next two decades with five scenarios of land use change, the Global Fire Emissions Database Version 3, detailed 1-km2 land use change maps, and MODIS fire radiative power observations. Despite comprising only 16% of the original study area, we predict that 37-48% of future Sumatra emissions from land use change will occur in fuel-rich peatswamps unless this land cover type is protected effectively. This result means that the impact of fires on future air quality and climate in Equatorial Asia will be decided in part by the conservation status given to the remaining peatswamps on Sumatra. Results from this article will be implemented in an atmospheric transport model to quantify the public health impacts from the transport of fire emissions associated with future land use scenarios in Sumatra.

2002-2017 anthropogenic emissions data for air quality modeling over the United States.

The United States Environmental Protection Agency (US EPA) has developed a set of annual North American emissions data for multiple air pollutants across 18 broad source categories for 2002 through 2017. The sixteen new annual emissions inventories were developed using consistent input data and methods across all years. When a consistent method or tool was not available for a source category, emissions were estimated by scaling data from the EPA's 2017 National Emissions Inventory with scaling factors based on activity data and/or emissions control information. The emissions datasets are designed to support regional air quality modeling for a wide variety of human health and ecological applications. The data were developed to support simulations of the EPA's Community Multiscale Air Quality model but can also be used by other regional scale air quality models. The emissions data are one component of EPA's Air Quality Time Series Project which also includes air quality modeling inputs (meteorology, initial conditions, boundary conditions) and outputs (e.g., ozone, PM2.5 and constituent species, wet and dry deposition) for the Conterminous US at a 12 km horizontal grid spacing.

The contribution of wildland fire emissions to deposition in the U S: implications for tree growth and survival in the Northwest.

Ecosystems require access to key nutrients like nitrogen (N) and sulfur (S) to sustain growth and healthy function. However, excessive deposition can also damage ecosystems through nutrient imbalances, leading to changes in productivity and shifts in ecosystem structure. While wildland fires are a known source of atmospheric N and S, little has been done to examine the implications of wildland fire deposition for vulnerable ecosystems. We combine wildland fire emission estimates, atmospheric chemistry modeling, and forest inventory data to (a) quantify the contribution of wildland fire emissions to N and S deposition across the U S, and (b) assess the subsequent impacts on tree growth and survival rates in areas where impacts are likely meaningful based on the relative contribution of fire to total deposition. We estimate that wildland fires contributed 0.2 kg N ha-1 yr-1 and 0.04 kg S ha-1 yr-1 on average across the U S during 2008-2012, with maxima up to 1.4 kg N ha-1 yr-1 and 0.6 kg S ha-1 yr-1 in the Northwest representing over ~30% of total deposition in some areas. Based on these fluxes, exceedances of S critical loads as a result of wildland fires are minimal, but exceedances for N may affect the survival and growth rates of 16 tree species across 4.2 million hectares, with the most concentrated impacts occurring in Oregon, northern California, and Idaho. Understanding the broader environmental impacts of wildland fires in the U S will inform future decision making related to both fire management and ecosystem services conservation.

Predicting wildfire particulate matter and hypothetical re-emission of radiological Cs-137 contamination incidents.

Radiological release incidents can potentially contaminate widespread areas with radioactive materials and decontamination efforts are typically focused on populated areas, which means radionuclides may be left in forested areas for long periods of time. Large wildfires in contaminated forested areas have the potential to reintroduce these radionuclides into the atmosphere and cause exposure to first responders and downwind communities. One important radionuclide contaminant released from radiological incidents is radiocesium (137Cs) due to high yields and its long half-life of 30.2 years. An Eulerian 3D photochemical transport model was used to estimate potential ambient impacts of 137Cs re-emission due to wildfire following hypothetical radiological release scenarios. The Community Multiscale Air Quality (CMAQ) model did well at predicting levels and periods of increased PM2.5 carbon due to wildfire smoke at routine surface monitors in California during the summer of 2016. The model also did well at capturing the extent of the surface mixing layer compared to aerosol lidar measurements. Emissions from a large hypothetical wildfire were introduced into the wildland-urban interface (WUI) impacted by a hypothetical radiological release event. While ambient concentrations tended to be highest near the fire, the highest population committed effective dose equivalent by inhalation to an adult from 137Cs over an hour was downwind where wind flows moved smoke to high population areas. Seasonal variations in meteorology (wind flows) can result in differential population impacts even in the same metropolitan area. Modeled post-incident ambient levels of 137Cs both near these wildfires and further downwind in nearby urban areas were well below levels that would necessitate population evacuation or warrant other protective action recommendations such as shelter-in-place. These results suggest that 1) the modeling system captures local to regional scale transport and levels of PM2.5 from wildfire and 2) first responders and downwind population would not be expected to be at elevated risk from the initial inhalathion exposure of 137Cs re-emission.

Fires, Smoke Exposure, and Public Health: An Integrative Framework to Maximize Health Benefits From Peatland Restoration.

Emissions of particulate matter from fires associated with land management practices in Indonesia contribute to regional air pollution and mortality. We assess the public health benefits in Indonesia, Malaysia, and Singapore from policies to reduce fires by integrating information on fire emissions, atmospheric transport patterns, and population exposure to fine particulate matter (PM2.5). We use adjoint sensitivities to relate fire emissions to PM2.5 for a range of meteorological conditions and find that a Business-As-Usual scenario of land use change leads, on average, to 36,000 excess deaths per year into the foreseeable future (the next several decades) across the region. These deaths are largely preventable with fire reduction strategies, such as blocking fires in peatlands, industrial concessions, or protected areas, which reduce the health burden by 66, 45, and 14%, respectively. The effectiveness of these different strategies in mitigating human health impacts depends on the location of fires relative to the population distribution. For example, protecting peatlands through eliminating all fires on such lands would prevent on average 24,000 excess deaths per year into the foreseeable future across the region because, in addition to storing large amounts of fuel, many peatlands are located directly upwind of densely populated areas. We also demonstrate how this framework can be used to prioritize restoration locations for the Indonesian Peatland Restoration Agency based on their ability to reduce pollution exposure and health burden. This scientific framework is publicly available through an online decision support tool that allows stakeholders to readily determine the public health benefits of different land management strategies.