Randomised controlled trial on testing an increased vertical dimension of occlusion prior to restorative treatment of tooth wear.

BACKGROUND: Evaluation of a new vertical dimension of occlusion (VDO) in complex restorative treatments is considered a necessary step prior to placement of restorations. OBJECTIVES: This randomised controlled trial (RCT) aimed to assess the effects of using an evaluation of a VDO increase before restorative treatment in patients with moderate-to-severe tooth wear, on OHRQoL, freeway space (FWS) and interventions to restorations. METHODS: Forty-two patients with tooth wear were included and randomly allocated to either a test phase with a Removable Appliance (RA) or no test phase. Restorative treatment consisted of restoration of all teeth using composite restorations in an increased VDO. OHIP-score, freeway space (FWS) and clinical acceptability of restorations were assessed at baseline and at recall appointments (1 month and 1 year). Intervention to restoration was scored in case of material chipping or when the abutment tooth had increased sensitivity that could be linked to occlusal overloading. ANCOVA analyses, Univariate Cox regression, t-tests and descriptive analyses were performed (p < .05). RESULTS: Clinical follow-up after 1 year was completed for 41 patients. No significant effect of testing the VDO with a RA could be found on the OHIP-score (p = .14). Reduction of FWS in the RA group, compared to the control group, was significantly lower at 1 year (p = .01, 95% CI -1.09 to -0.15). No effect on early interventions to restorations was found (p = .94). CONCLUSION: This RCT showed that a removable appliance is not indicated to functionally test the increased VDO prior to restorative treatment in patients with tooth wear.

Shear resistance of fiber-reinforced composite and metal dentin pins.

PURPOSE: To assess whether dentin pins increase shear resistance of extensive composite restorations and to compare performance of mini fiber-reinforced composite (FRC) anchors with metal dentin pins in the laboratory. METHODS: 30 extracted sound molars were randomly divided into three groups. Occlusal surfaces were ground flat with a standard surface area and resin composite restorations were made in Group A. In Groups B and C similar restorations were made, with additionally four metal pins placed in Group B and four FRC pins in Group C. Specimens were statically loaded until failure occurred. Failure modes were characterized as intact remaining tooth substrate (adhesive or cohesive failure of restoration) or fractured remaining tooth substrate. RESULTS: Mean failure stresses were 6.5 MPa (SD 3.2 MPa) for Group A, 9.7 MPa (SD 2.6 MPa) for Group B and 9.2 MPa (SD 2.6 MPa) for Group C. Difference in mean failure stresses between Group A and Groups B and C was statistically significant (P = 0.01), while the difference between Groups B and C was not (P = 0.63). Failures of the restoration without fracture of tooth substrate were seen for 80% of specimens in Group A and 20% in Groups B and C (P = 0.04).

Rehabilitation of Worn Dentition with CAD-CAM Restorations: A Case Report.

PURPOSE: To describe the digital workflow applied for restoring a severely worn dentition with minimally invasive CAD/CAM resin nano-composite restorations. MATERIALS AND METHODS: A 40-year-old male in good general health and with full-arch dentition suffered from dentin hypersensitivity and wanted to improve the esthetics of his worn anterior teeth. The dental wear can be described as general, grade 3, according to the Tooth Wear Index,27 with more wear in maxillary than in mandibular teeth. Signs and symptoms were typical for a chemical type of wear, with some mechanical wear also apparent. No functional problems, eg, impaired chewing, were present. On the OHIP-49 questionnaire, the patient expressed a reduced quality of life. The goal of the treatment was to reconstruct the anatomical form of the teeth as far as possible, thereby also improving quality of life. Due to the rather large volume of lost tooth tissue per tooth, indirect treatment using CAD/CAM resin nano-composite restorations (LAVA Ultimate, 3M Oral Care) was applied. RESULTS: The seating of the CAD/CAM resin nano-composite restorations (LAVA Ultimate, 3M Oral Care) restorations was considered precise. CONCLUSION: In the treatment of severe tooth wear, the described digital workflow using CAD/CAM restorations for occluding restorations and direct composite materials in the esthetic zone is a potential treatment modality that is workable and minimally invasive.

Prospective Study on CAD/CAM Nano-Ceramic (Composite) Restorations in the Treatment of Severe Tooth Wear.

PURPOSE: The aim of this prospective study was to evaluate the clinical performance of minimally invasive, CAD/CAM nano-ceramic (composite) restorations in patients with severe tooth wear, the effect of the restorative treatment on the oral health-related quality of life (OHRQoL), and the etiology of tooth wear as a risk factor for restoration failure. MATERIALS AND METHODS: Patients with generalized severe tooth wear were included. Restorations (LAVA Ultimate, 3M Oral Care) were cemented (RelyX Ultimate, 3M Oral Care) on all teeth and were evaluated after 1 month and 1 year. OHRQoL was assessed via questionnaires at baseline and after 1 year. Differences were evaluated (paired t-test). Two mechanical tooth-wear lesions resulting from tooth-tooth contact, and 3 chemical tooth wear lesions resulting from intrinsic or extrinsic acids dissolving natural hard tooth substance, were evaluated to assess the etiology of tooth wear in association with restoration failure using multilevel logistic regression analyses (p < 0.05). RESULTS: Twenty-one patients (age: 41.7 ± 10.4 years) were evaluated after 1 year (13.5 ± 1.2 months). 568 indirect CAD/CAM restorations were placed. None were replaced or lost. Twelve were repaired and 10 were refurbished. Success rates were 100% to 97.2%. Questionnaires showed a significant positive impact of the treatment on OHRQoL (p < 0.001). The presence of mechanical lesions did not pose a higher risk for restoration failure (p = 0.78). The presence of chemical lesions showed a lower risk of restoration failure (p = 0.002). CONCLUSION: The use of minimally invasive, CAD/CAM nano-ceramic (composite) restorations in the restorative treatment of severely worn dentitions showed satisfactory results in the short term.

Clinical performance of direct composite restorations for treatment of severe tooth wear.

PURPOSE: The aim of this retrospective clinical study was to evaluate the performance of direct composite restorations that were placed in patients with severe tooth wear requiring an increase of the occlusal vertical dimension. METHODS AND MATERIALS: Eighteen patients with severe tooth wear, who had been treated in a private practice between April 1996 and July 2007, were selected. All subjects had been treated with direct composite resin restorations in increased vertical dimension using a three-step etch-and-rinse adhesive system and a hybrid composite resin. From the dental records, information about re-intervention and replacement of restorations was obtained. Patients were then clinically examined to evaluate the status of the restorations and interviewed about their satisfaction with the restorative treatment using a Visual Analogue Scale (VAS). RESULTS: Eighteen patients (16 male, 2 female with an average age of 44.8 years) with severe tooth wear were included in the study. Time since treatment ranged from 6 months to 12 years and the mean observation time was 3.98 years. Of the 332 restored teeth, 23 restorations showed failures (6.9%). Eight restorations (2.4%) showed major fractures, 11 restorations (3.3%) showed minor fractures, and four restorations (1.2%) failed due to secondary caries. VAS data on a scale of 0 to 10 revealed high patient satisfaction with this type of restoration (mean 9.0). CONCLUSION: Treatments with direct hybrid composite restorations placed in an increased occlusal vertical dimension showed good clinical performance in patients with severe tooth wear.

Clinical studies of fiber-reinforced resin-bonded fixed partial dentures: a systematic review.

In the past decade, follow-up studies on fiber-reinforced composite fixed partial dentures (FRC FPDs) have been described. Combining the results of these studies to draw conclusions about the effectiveness of FRC FPDs is challenging. The objective of this systematic review was to obtain survival rates of FRC FPDs and to explore the relationships between reported survival rates and risk factors. In a literature-selection procedure on the clinical performance of FRC FPDs, 15 studies, reporting on 13 sets of patients, were analyzed. The Kaplan-Meier estimate of the overall survival, based on the data from all sets of patients (n = 435) was 73.4% (69.4-77.4%) at 4.5 yr. Converted survival rates at 2 yr of follow-up showed substantial heterogeneity between studies. It was not possible to build a reliable regression model that indicated risk factors. The technical problems most commonly described were fracture of the FPD and delamination of the veneering composite.

Replacement of missing teeth in a southern region of Vietnam--a descriptive dental laboratory study.

AIM: To explore whether tooth replacement in a southern region of Vietnam is in line with the primary health care approach, aiming at health services for all people at affordable costs. METHODS: Tooth replacement was investigated by means of prostheses as delivered by four dental laboratories of which the output was considered representative. Information was based on dental casts related to the prostheses. RESULTS: Prostheses replaced almost all missing teeth, irrespective of the types (interrupted or shortened dental arches) and numbers of missing teeth in the dental arch they were made for. Acrylic removable partial dentures were the most common prostheses delivered (65% of removable partial dentures). CONCLUSION: It cannot be stated that dental arch conditions in this study were representative for the southern Vietnamese population. However, it is concluded that dental practitioners tend to provide complete dental arches by tooth replacements. This morphologically based approach might introduce over treatment. In line with primary oral health care, a functionally oriented treatment management, including the shortened dental arch concept, should be implemented.

Fiber-reinforced dental composites in beam testing.

OBJECTIVES: The purpose of this study was to systematically review current literature on in vitro tests of fiber-reinforced composite (FRC) beams, with regard to studies that followed criteria described in an International Standard. The reported reinforcing effects of various fibers on the flexural strength and elastic modulus of composite resin beams were analyzed. SOURCES: Original, peer reviewed papers, selected using Medline from 1950 to 2007, on in vitro testing of FRC beams in comparison to non-reinforced composite beams. Also information from conference abstracts (IADR) was included. DATA: With the keywords (fiber or fibre) and (resin or composite) and (fixed partial denture or FPD), the literature search revealed 1427 titles. Using this strategy a broad view of the clinical and non-clinical literature on fiber-reinforced FPDs was obtained. Restricting to three-point bending tests, 7 articles and 1 abstract (out of 126) were included. Finally, the data of 363 composite beams were analyzed. The differences in mean flexural strength and/or modulus between reinforced and unreinforced beams were set out in a forest plot. Meta-regression analyses were performed (single and multiple regression models). CONCLUSIONS: Under specific conditions we have been able to show that fibers do reinforce resin composite beams. The flexural modulus not always seems to increase with polyethylene-reinforcement, even when fibers are located at the tensile side. Besides, fiber architecture (woven vs. unidirectional) seems to be more important than the type of fiber for flexural strength and flexural modulus.

Up to 17-year controlled clinical study on post-and-cores and covering crowns.

OBJECTIVE: The aim of this long-term follow-up was to collect up to 17-year survival data of different metal post-and-core restorations with a covering crown. METHODS: At initiation of the study, a controlled clinical trial, single tooth was provided with an artificial covering crown, by 18 operators. Restorations under investigation were the post-and-core restorations: cast post-and-core restorations, prefabricated metal post and resin composite core restorations, and post-free all-composite core restorations. Before treatment allocation, the recipient tooth was categorized according to the expected dentin height after tooth preparation. A tooth was assessed to have "substantial dentin height" (Trial 1) or "minimal dentin height" (Trial 2). The study sample consisted of 257 patients that received 307 core restorations. The performance of the restorations was based on data collected from the files of the current dentists monitoring the oral health of the patients. The survival probability was analyzed at different levels: on the restoration level (S(R)), and on the level of the tooth carrying the restoration (S(T)). Kaplan Meier analyses were used to compare survival probabilities. RESULTS: "Type of post-and-core restoration" showed no influence on the survival probability (at both levels) in both trials (P-value>0.05). The 17-year survival rates at restoration level varied from 71% to 80%, and at tooth level from 83% to 92%. CONCLUSIONS: The results of this study showed no difference in survival probabilities among different core restorations under a covering crown of endodontically treated teeth. The preservation of substantial remaining coronal tooth structure seems to be critical to the long-term survival of endodontically treated crowned teeth.

Fracture behavior of structurally compromised non-vital maxillary premolars restored using experimental fiber reinforced composite crowns.

PURPOSE: To study the fracture behavior of direct resin composite crowns with or without experimental fiber reinforcement. METHODS: Clinical crowns of single-rooted maxillary premolars were cut off at the cemento-enamel junction. Canals were prepared with Gates Glidden drills up to size 4. No additional post-space preparations were made. Roots were embedded in acrylic and canal entrances were standardized (depth 2 mm, diameter 1.75 mm). Three groups of 14 samples were treated as follows: (1) custom-made glass FRC post (EverStick Post); fibers 5 mm deep in the canal, (2) similar post-system as (1) with incorporation of a new type of glass fiber fabric, (3) no fiber reinforcement (control). Posts were cemented with resin cement (Panavia F). Resin composite crowns (Filtek Z250) were made using an anatomically formed mold. Static load until fracture was applied using a universal loading device with a cylindrical bar (diameter 2 mm) with a crosshead speed of 5 mm/minute (loading angle: 30 degrees to the tooth long-axis). Failure modes were categorized as favorable and unfavorable failures. RESULTS: There was no significant difference in mean failure loads among the four groups (P > 0.05). Favorable failures occurred significantly more often in Group 2 than in the other groups (P < 0.05). The results suggest that an incorporated glass fiber fabric does not affect the load-bearing capacity of resin composite complete crowns on structurally compromised and non-vital premolars. Incorporation of a glass fiber fabric, however, has a beneficial effect on the failure mode.

Survival of Restored Endodontically Treated Teeth in Relation to Periodontal Status.

The aim of the present study was to investigate the success and survival of restored endodontically treated teeth (ETT) in a general practice environment related to periodontal parameters. Data from 360 restored ETT treated between 2000 and 2011 were collected. Dates of interventions like restorations, repairs, replacements and extractions were recorded. Additionally, general information about patients and dentitions as well as periodontal status was recorded. Success was analyzed using Kaplan-Meier statistics and a multivariate Cox regression analysis was performed to assess variables influencing success and survival. After a mean observation time of 4.34 years (range 0.6 - 11.6 years), 19 teeth were extracted and 27 restorations needed repair or replacement. According to the Cox regression, increasing maximum pocket depth of the tooth resulted in a higher risk for failure (p=0.012). In conclusion, periodontal pocket depth was found to be a significant factor in the survival of restored ETT.

In vitro fracture resistance of fiber reinforced cusp-replacing composite restorations.

OBJECTIVES: To assess the fracture resistance and failure mode of fiber reinforced composite (FRC) cusp-replacing restorations in premolars. METHODS: Forty-five extracted sound upper premolars were randomly divided into three groups. Identical MOD cavities with simulated buccal cusp fracture and height reduction of the palatal cusp were prepared. In Group A two layers of resin impregnated woven continuous FRC (EverStick Net) were applied. In Group B one layer of unidirectional continuous FRC (EverStick) was used. In Group C no fibers were applied (control). Subsequently, all teeth were restored with resin composite (Clearfil Photo Posterior), subjected to thermocycling (6000 x 5-55 degrees C) and static load tests. Load until fracture was registered for each tooth. Simultaneously, fracture propagation was monitored using acoustic emission analysis (AE). Failure modes were visually assessed. RESULTS: Weibull analysis revealed a characteristic strength and Weibull modulus (m) at 2364.8 N for Group A (m=8.9), 2437.9 N for Group B (m=5.9) and 2160.3N for Group C (m=13.6). Fracture loads were not significantly different (ANOVA, p>0.05). Teeth with FRC showed less fractures below the cemento-enamel junction (CEJ) (38% and 23% for Groups A and B, respectively) than teeth without FRC (93%) (chi-square, p<0.05). The control group showed the least AE energy signals. SIGNIFICANCE: The results suggest that glass FRC does not increase fracture load of premolars with cusp-replacing restorations. However, FRC has a beneficial effect on the failure mode. Woven fibers give more consistent results than unidirectional fibers.

The shortened dental arch concept--attitudes of dentists in Tanzania.

OBJECTIVES: The shortened dental arch concept is a problem-oriented strategy to reduce complex restorative treatment in the posterior regions. The aim of this study was to determine the attitude of Tanzanian dentists about this concept. METHODS: A questionnaire was sent to all 77 dentists treating patients in Tanzania. The questionnaire contained items to assess the dentist's opinions such as dentist's judgement about the oral function of subjects with shortened dental arches, the type of treatment (or no treatment) of subjects with shortened dental arches and the reactions of patients to the proposal to shorten the dental arch. A short description about the problem-oriented approach and the shortened dental arch concept was included. RESULTS: Most of the responding dentists judged that shortened dental arches can provide satisfactory or acceptable chewing function (71%) and dental appearance (79%). Most dentists (89%) indicated that the shortened dental arch concept, as an example of a problem-oriented approach, has a useful place in clinical practice. However, most dentists (89%) inserted free-end acrylic partial dentures in these cases. Dentists with experience to apply the concept indicated that most of the patients have no objections after explanation of the proposal to shorten the dental arch. CONCLUSIONS: From this study it is concluded that the shortened dental arch concept is an acceptable strategy for dentists in Tanzania. However, many dentists doubt its implementation in clinical practice.

Chewing ability of subjects with shortened dental arches.

OBJECTIVES: The objective was to study chewing ability in subjects with shortened dental arches in Tanzania. METHODS: A sample of 725 adults with shortened dental arches comprising intact anterior regions and 0-8 occluding pairs of posterior teeth and 125 adults with complete dental arches were recruited. Subjects were classified into nine categories according to arch length and symmetry. Chewing ability was investigated by interview on chewing complaints and on perceived difficulty of chewing 20 common Tanzanian foods, 12 soft, and 8 hard. RESULTS: Categories with extreme shortened arches (0-2 pairs of occluding premolars) reported most frequent (95-98%) and most severe complaints ('cannot chew all foods' or 'have to use special or specially prepared food'). Categories with intact premolar regions and at least one occluding pair of molars had nearly no complaints (95-97%). The other arch categories had an intermediate volume of complaints (33-54%). Perceived difficulty of chewing deteriorated with a decrease of occluding pairs of teeth. Subjects with 0-2 pairs of occluding premolars had major difficulties with chewing. Subjects with 3-4 pairs of occluding premolars or asymmetric arches comprising a short side with none or one pair of premolars and a long side including at least one occluding pair of molars had more difficulties with chewing compared to subjects with more complete dental arches. As a whole, they perceived for hard foods, 'minor problems, not adapted'. CONCLUSIONS: Shortened dental arches with intact premolar regions and at least one occluding pair of molars provide sufficient chewing ability. Shortened arches with 3-4 pairs of occluding premolars and asymmetric arches with a long side result in impairment of chewing ability, especially for hard foods. In extremely shortened arches comprising 0-2 occluding premolars, chewing ability is severely impaired.

Fracture strength of cusp replacing resin composite restorations.

PURPOSE: To assess the influence of an additional shoulder preparation on the fracture strength of a cusp-replacing direct resin composite restoration in a premolar that previously had an amalgam MOD restoration followed by fracture of a cusp. MATERIALS AND METHODS: Two preparation designs were tested. In extracted sound premolars an MOD amalgam cavity was simulated followed by fracture of a cusp (Group A). Group B was the same as Group A but a shoulder was added along the cervical outline of the preparation. As a control group, cusp fracture was simulated but no MOD amalgam cavities were prepared. For each group, 14 preparations were made using a copy milling technique. All 42 preparations were restored using a direct resin composite restoration technique. Restorations were loaded until fracture. RESULTS: The fracture strength of the preparation with shoulder was not significantly different from the preparation without the shoulder. The fracture strength of the preparations in the reference group, which had no resistance form, was significantly less than in Groups A and B (ANOVA, P<0.05).

Assessment of early attrition using an ordinary flatbed scanner.

UNLABELLED: The aim of this study was to assess a two-dimensional method to monitor occlusal tooth wear quantitatively using a commercially available ordinary flatbed scanner. MATERIALS AND METHODS: A flatbed scanner, measuring software and gypsum casts were used. In Part I, two observers (A and B) independently traced scans of marked wear facets of ten sets of casts in two sessions (test and retest). In Part II, three other sets of casts were duplicated and two observers (C and D) marked wear facets and traced the scanned images independently. Intra- and inter-observer agreement was determined comparing measured values (mm(2)) in paired T-tests. Duplicate measurement errors (DME) were calculated. RESULTS: In Part I the test and retest values (10 casts, 218 teeth) of observer A and B did not differ significantly (A: p = 0.289; B: p = 0.666); correlation coefficients were 0.998 (A) and 0.999 (B). "Tracing wear facets" showed a DME of 0.30 mm(2) for observer A and 0.15 mm(2) for observer B. In Part II, assessment of 70 teeth resulted in correlation coefficients of 0.994 for observer C and 0.997 for observer D; no differences between test and retest values were found for C (p = 0.061), although D differed significantly (p = 0.000). The DME for "marking and tracing wear facets" was 0.39 mm(2) (C) and 0.27 mm(2) (D). DME for inter-observer agreement were 0.45 mm(2) (test) and 0.42 mm(2) (re-test). CONCLUSION AND CLINICAL RELEVANCE: We conclude that marking and tracing of occlusal wear facets to assess occlusal tooth wear quantitatively can be done accurately and reproducibly.

Body position and occlusal contacts in lateral excursions: a pilot study.

This pilot study aimed to explore whether occlusal contacts during lateral excursions are influenced by tilted body positions. Occlusal contacts in lateral excursions were verified for 30 dental students and 22 dental staff members using articulation foil while patients were seated in a dental chair. The number and location of dynamic tooth contacts (initial and halfway) were registered with the back of the dental chair in three positions: upright, 45 degrees, and supine. For the majority of subjects (96%), dynamic occlusal contacts changed when the body position was altered.

In vitro repair of fractured fiber-reinforced cusp-replacing composite restorations.

Objective. To assess fracture resistance and failure mode of repaired fiber-reinforced composite (FRC) cusp-replacing restorations. Methods. Sixteen extracted human premolars with fractured cusp-replacing woven (Group (A)) or unidirectional (Group (B)) FRC restorations from a previous loading experiment were repaired with resin composite and loaded to fracture. Results. Differences in fracture loads between groups were not statistically significant (P = 0.34). Fracture loads of repaired specimens were significantly lower than those of original specimens (P = 0.02 for Group (A) and P < 0.001 for Group (B)). Majority of specimens showed failure along the repaired surface. In Group (B) 89% of specimens showed intact tooth substrate after restoration fracture, while this was 28% in Group (A) (P = 0.04). Conclusion. Fractured cusp-replacing FRC restorations that are repaired with resin composite show about half of fracture resistance of original restorations. Mode of failure with a base of unidirectional fibers is predominantly adhesive.

Survival of Restored Endodontically Treated Teeth in Relation to Periodontal Status

Abstract The aim of the present study was to investigate the success and survival of restored endodontically treated teeth (ETT) in a general practice environment related to periodontal parameters. Data from 360 restored ETT treated between 2000 and 2011 were collected. Dates of interventions like restorations, repairs, replacements and extractions were recorded. Additionally, general information about patients and dentitions as well as periodontal status was recorded. Success was analyzed using Kaplan-Meier statistics and a multivariate Cox regression analysis was performed to assess variables influencing success and survival. After a mean observation time of 4.34 years (range 0.6 - 11.6 years), 19 teeth were extracted and 27 restorations needed repair or replacement. According to the Cox regression, increasing maximum pocket depth of the tooth resulted in a higher risk for failure (p=0.012). In conclusion, periodontal pocket depth was found to be a significant factor in the survival of restored ETT.

Resumo O objetivo do presente estudo foi investigar a taxa de sucesso e de sobrevivência de dentes restaurados e tratados endodonticamente (DTE) em uma clínica privada e relacionar com índices periodontais. Dados de 360 restaurações realizadas em DTE realizadas entre 2000 e 2011 foram coletados. As datas das intervenções, como restaurações, reparos, substituições e extrações foram registradas. Ainda, informações gerais relacionadas aos pacientes, aos dentes envolvidos e ao estado periodontal foram também coletadas. A taxa de sucesso foi analisada utilizando o método estatístico Kaplan-Meier e uma análise multivariada do tipo regressão de Cox foi realizada para avaliar variáveis que influenciaram na taxa de sucesso e de sobrevivência. Depois de um período de observação médio de 4,34 anos (0,6-11,6 anos), 19 dentes foram extraídos e 27 restaurações precisaram de reparo ou substituição. De acordo com a regressão de Cox, o aumento na profundidade de bolsa periodontal do dente resulta em um maior risco de falha (p=0,012). Em conclusão, a profundidade de bolsa periodontal foi considerada como um fator significativo na sobrevivência de dentes restaurados e tratados endodonticamente.