Comparison between Electropolymers of 3,5-Dihydroxybenzoic Acid and 2',6'-Dihydroxyacetophenone in Dimethyl Sulfoxide and Their Analytical Performance towards Selected Analytes with the Role of the Washing Liquid.

In the first part of this study, the electrochemical polymerization of two compounds, 3,5-dihydroxybenzoic acid and 2',6'-dihydroxyacetophenone, was compared in dimethyl sulfoxide solvent on platinum and glassy carbon electrodes. The voltammograms obtained showed remarkable differences between the two monomers and between the two electrode materials. The acetophenone derivative formed electropolymer remnants at the electrodes, while in the case of the benzoic acid derivative, practically no passivation occurred, and the scanning electron microscopic results reinforced this. A few stackings adsorbed only after electropolymerization from a highly concentrated solution of dihydroxybenzoic acid. As a modifying layer on the platinum and glassy carbon electrodes, the prepared films from 2',6'-dihydroxyacetophenone were tested for tributylamine in acetonitrile and in an aqueous solution of a redox-active compound, hydroquinone, during the stirring of the solution. More stable amperometric current signals could be reached with modified platinum than with glassy carbon, and the significant influence of the organic washing liquid after deposition was established via the study of noise level. In this respect, acetone was the best choice. The amperometric signals with the modified platinum obtained upon the addition of aliquots of the stock solution resulted in a 3.29 µM detection limit.

Effect of Ceramic and Dentin Thicknesses and Type of Resin-Based Luting Agents on Intrapulpal Temperature Changes during Luting of Ceramic Inlays.

The adhesive cementation of ceramic inlays may increase pulpal temperature (PT) and induce pulpal damage due to heat generated by the curing unit and the exothermic reaction of the luting agent (LA). The aim was to measure the PT rise during ceramic inlay cementation by testing different combinations of dentin and ceramic thicknesses and LAs. The PT changes were detected using a thermocouple sensor positioned in the pulp chamber of a mandibular molar. Gradual occlusal reduction obtained dentin thicknesses of 2.5, 2.0, 1.5, and 1.0 mm. Light-cured (LC) and dual-cured (DC) adhesive cements and preheated restorative resin-based composite (RBC) were applied to luting of 2.0, 2.5, 3.0, and 3.5 mm lithium disilicate ceramic blocks. Differential scanning calorimetry was used to compare the thermal conductivity of dentin and ceramic slices. Although ceramic reduced heat delivered by the curing unit, the exothermic reaction of the LAs significantly increased it in each investigated combination (5.4-7.9 °C). Temperature changes were predominantly influenced by dentin thickness followed by LA and ceramic thickness. Thermal conductivity of dentin was 24% lower than that of ceramic, and its thermal capacity was 86% higher. Regardless of the ceramic thickness, adhesive inlay cementation can significantly increase the PT, especially when the remaining dentin thickness is <2 mm.

A New Application of Spin and Fluorescence Double-Sensor Molecules.

EPR imaging techniques are known to be successful tools for mapping living bodies, especially because of the high transparency of tissues in the microwave range. This technique assumes the presence of radicals whose in vivo transport is also controlled by serum albumins. Accordingly, in this study, the interactions between 3-hydroxymethyl-1-oxyl-4-(pyren-1-yl)-2,2,5,5-tetramethyl-2,5-dihydro-1H-pyrrole radical and the human serum albumin molecules were investigated. To clarify the adsorption processes of this radical onto the surface of human serum albumin (HSA), the interaction of the OMe derivative of the radical was also examined parallel with the studies on the radical-HSA interactions. Considering the solubility issues and also to modulate the transport, inclusion complexes of the radical with a cavitand derivative were also studied. The latter interactions were observed through fluorescence spectroscopy, fluorescence polarization, and by EPR spectroscopy. As a double-sensor molecule, we found that the fluorophore nitroxide is a good candidate as it gave further information about host-guest interactions (fluorescence, fluorescence polarization, and EPR). We also found that in the presence of a cavitand, a complex with greater stability was formed between the sensor molecule and the human serum albumin. Based on these observations, we can conclude that applying this double-sensor (spin, fluorescent) molecule is useful in cases when different interactions can affect the EPR measurements.

Voltammetric and Fluorimetric Studies of Dibenzoylmethane on Glassy Carbon Electrodes and Its Interaction with Tetrakis (3,5-Dicarboxyphenoxy) Cavitand Derivative.

Due to the medical importance of dibenzoylmethane, one of the aims of the study was to find an appropriate packing material and a biologically friendly co-solvent to help its introduction into living systems. Accordingly, redox properties of dibenzoylmethane were investigated on glassy carbon electrodes in acetonitrile and in 1-propanol with cyclic voltammetry, and showed a diffusion-controlled process. In the anodic window, an oxidation peak appeared at around 1.9 V in both solvents. Cycling repeatedly between 0 and 2 V, the reproducibility of this peak was acceptable, but when extending the window to higher potentials, the electrode deactivated, obviously due to electrode material. The addition of the investigated tetrakis(3,5-dicarboxyphenoxy) cavitand did not significantly change the voltammograms. Further electrochemical experiments showed that the coexistence of water in acetonitrile and 1-propanol drastically reduces the solubility of dibenzoylmethane. Moreover, very rapid electrode deactivation occurred and this fact made the use of electrochemical methods complicated. Considering that both the cavitand and dibenzoylmethane are soluble in dimethyl sulfoxide, the interaction of these species was investigated and formation of stable complexes was detected. This observation was verified with fluorescence quenching studies. The mixture of water and dimethyl sulphoxide also dramatically improved the solubility of the cavitand-dibenzoylmethane complex at high excess of water. The addition of cavitand improved the solubility of dibenzoylmethane, a property which supports the application of dibenzoylmethane in therapy.

Anodic Polymerization of Phenylphenols in Methyl Isobutyl Ketone and Mesityl Oxide: Incorporation of a Cavitand into the Layers Formed for Sensing Phenols in Organic Media.

The electropolymerization of three phenylphenol isomers was studied in methyl isobutyl ketone and mesityl oxide, and the remarkable differences highlighted the importance of the carbon-carbon double bond in mesityl oxide. In the case of each substrate, a brownish deposit formed during the electrooxidation. The obvious difference between the polymers formed from the two solvents was recognized via voltammetric signal enhancement of 4-methoxyphenol and 4-chlorophenol, and it was only observed in the case of mesityl oxide. The experiments highlighted that incorporation of a cavitand with biphenyl groups on the upper rim of the polymers of phenylphenols improved the results to a small extent. The cavitand was, itself, electroactive without any fouling effect. As 2-phenylphenol is by far the cheapest of the three isomers, a cavitand was incorporated into its polymer, which was exploited to solve analytical problems while mesityl oxide was used as solvent. Useful quantifications were achieved in organic solvents; however, it failed under aqueous conditions due to the high hydrophobicity of the deposit. Application of differential pulse voltammetry for 4-methoxyphenol and 4-chlorophenol gave detection limits of 9.28 and 50.8 µM in acetonitrile, respectively. This procedure resulted in the immobilization of cavitand derivatives onto the electrode's surface, and the layer formed offered selective sensing of phenols by electrochemical methods.

Influence of Aliphatic Chain Length on Structural, Thermal and Electrochemical Properties of n-alkylene Benzyl Alcohols: A Study of the Odd-Even Effect.

The century-old, well-known odd-even effect phenomenon is still a very attractive and intriguing topic in supramolecular and nano-scale organic chemistry. As a part of our continuous efforts in the study of supramolecular chemistry, we have prepared three novel aromatic alcohols (1,2-bis[2-(hydroxymethyl)phenoxy]butylene (Do4OH), 1,2-bis[2-(hydroxymethyl)phenoxy]pentylene (Do5OH) and 1,2-bis[2-(hydroxymethyl)phenoxy]hexylene (Do6OH)) and determined their crystal and molecular structures by single-crystal X-ray diffraction. In all compounds, two benzyl alcohol groups are linked by an aliphatic chain of different lengths (CH2)n; n = 4, 5 and 6. The major differences in the molecular structures were found in the overall planarity of the molecules and the conformation of the aliphatic chain. Molecules with an even number of CH2 groups tend to be planar with an all-trans conformation of the aliphatic chain, while the odd-numbered molecule is non-planar, with partial gauche conformation. A direct consequence of these structural differences is visible in the melting points-odd-numbered compounds of a particular series display systematically lower melting points. Crystal and molecular structures were additionally studied by the theoretical calculations and the melting points were correlated with packing density and the number of CH2 groups. The results have shown that the generally accepted rule, higher density = higher stability = higher melting point, could not be applied to these compounds. It was found that the denser packaging causes an increase in the percentage of repulsive H‧‧‧H interactions, thereby reducing the stability of the crystal, and consequently, the melting points. Another interesting consequence of different molecular structures is their electrochemical and antioxidative properties-a non-planar structure displays the highest oxidation peak of hydroxyl groups and moderate antioxidant activity.

Temperature-Induced Change of Water Structure in Aqueous Solutions of Some Kosmotropic and Chaotropic Salts.

The hydrogen bond structure of water was examined by comparing the temperature dependent OH-stretching bands of water and aqueous NaClO4, KClO4, Na2SO4, and K2SO4 solutions. Results called attention to the role of cations on top of the importance of anions determining the emerging structure of a multi-layered system consisting single water rings or multi-ring water-clusters.

Effects of Microenvironmental Changes on the Fluorescence Signal of Alternariol: Magnesium Induces Strong Enhancement in the Fluorescence of the Mycotoxin.

Alternariol (AOH) is an emerging mycotoxin produced by Alternaria molds. It occurs as a contaminant e.g., in oilseeds, cereals, grapes, and tomatoes. Chronic exposure to AOH may cause genotoxic and endocrine disruptor effects. Our recent studies demonstrated that the fluorescence signal of AOH can be strongly affected by the environmental pH as well as by the presence of serum albumin or cyclodextrins. In the current study, we aimed to characterize the most optimal circumstances regarding the highly sensitive fluorescent detection of AOH. Therefore, the further detailed investigation of the microenvironment on the fluorescence signal of the mycotoxin has been performed, including the effects of different buffers, organic solvents, detergents, and cations. Organic solvents (acetonitrile and methanol) caused only slight increase in the emission signal of AOH, while detergents (sodium dodecyl sulfate and Triton-X100) and Ca2+ induced considerably higher enhancement in the fluorescence of the mycotoxin. In addition, Mg2+ proved to be a superior fluorescence enhancer of the AOH. Spectroscopic and modeling studies suggest the formation of low-affinity AOH-Mg2+ complexes. The effect of Mg2+ was also tested in two HPLC assays: Our results show that Mg2+ can considerably increase the fluorescence signal of AOH even in a chromatographic system.

Weak Interactions of the Isomers of Phototrexate and Two Cavitand Derivatives.

The interactions of two conformers of newly synthesized photoswitchable azobenzene analogue of methotrexate, called Phototrexate, with two cavitand derivatives, have been investigated in dimethyl sulfoxide medium. Photoluminescence methods have been applied to determine the complex stabilities and the related enthalpy and entropy changes associated to the complex formation around room temperature. Results show opposite temperature dependence of complex stabilities. The structure of the upper rims of the host molecules and the reordered solvent structure were identified as the background of the opposite tendencies of temperature dependence at molecular level. These results can support the therapeutic application of the photoswitchable phototrexate, because the formation of inclusion complexes is a promising method to regulate the pharmacokinetics of drug molecules.

Weak Interaction of the Antimetabolite Drug Methotrexate with a Cavitand Derivative.

Formation of inclusion complexes involving a cavitand derivative (as host) and an antimetabolite drug, methotrexate (as guest) was investigated by photoluminescence measurements in dimethyl sulfoxide solvent. Molecular modeling performed in gas phase reflects that, due to the structural reasons, the cavitand can include the methotrexate in two forms: either by its opened structure with free androsta-4-en-3-one-17α-ethinyl arms or by the closed form when all the androsta-4-en-3-one-17α-ethinyl arms play role in the complex formation. Experiments reflect enthalpy driven complex formation in higher temperature range while at lower temperature the complexes are stabilized by the entropy gain.

Solvent Switched Weak Interaction of a 4-Quinazolinone with a Cavitand Derivative.

Interaction of 4-quinazolinone with tetrakis (3,5-dicarboxylatophenoxy)-cavitand derivative has been studied in methanol and dimethylformamide media using fluorescence spectroscopy and molecular modeling methods. Results show temperature dependent complex formation: either the entropy gain or the high enthalpy changes are responsible for the formation of stable complexes in two separated temperature regions. However, different thermodynamic parameters are associated to different conformations of the complexes: while the high entropy gain associated to the formation of deeply included guest in methanol, the high entropy gain is associated with the formation of weakly included guest in dimethylformamide solvent. This finding highlights the importance of dynamic properties of the species interacted in different solvents.

Adsorption of Sulfamethazine Drug onto the Modified Derivatives of Carbon Nanotubes at Different pH.

The sulfamethazine drug interaction with carbon nanotubes was investigated with the aim of improving the adsorption capacity of the adsorptive materials. Experiments were performed to clarify how the molecular environment affects the adsorption process. Single-walled carbon nanotubes have a higher removal efficiency of sulfamethazine than pristine or functionalized multi-walled carbon nanotubes. Although the presence of cyclodextrin molecules improves the solubility of sulfamethazine, it reduces the adsorption capacity of the carbon nanotube towards the sulfamethazine drug and, therefore, inhibits the removal of these antibiotic pollutants from waters by carbon nanotubes.

Terahertz electric field modulated mode coupling in graphene-metal hybrid metamaterials.

Taking advantage of the tunable conductivity of graphene under high terahertz (THz) electric field, a graphene-metal hybrid metamaterial consisting of an array of three adjoined orthogonally oriented split-ring resonators (SRRs) is proposed and experimentally demonstrated to show a maximum modulation depth of 23% in transmission when the THz peak field reaches 305 kV/cm. The transmission of the sample is dominated by the antisymmetric and symmetric resonant modes originating from the strong magneto-inductive and conductive coupling among the three SRRs, respectively. Numerical simulations and model calculations based on a coupled oscillator theory were performed to explain the modulation process. It is found that the graphene coating impairs the resonances by increasing the damping of the modes and decreasing the coupling between the SRRs whereas the strong THz field restores the resonances by decreasing the conductivity of graphene.

Interaction of Mycotoxin Alternariol with Serum Albumin.

Alternariol (AOH) is a mycotoxin produced by Alternaria species. In vitro studies suggest the genotoxic, mutagenic, and endocrine disruptor effects of AOH, and an increased incidence of esophageal cancer has been reported related to higher AOH exposure. Human serum albumin (HSA) is the most abundant plasma protein in the circulation, it is able to affect toxicokinetic properties of numerous xenobiotics. HSA forms stable complexes with several mycotoxins, however, the interaction of AOH with albumin has not been examined. In this study, the complex formation of AOH with HSA was tested, employing fluorescence spectroscopy, ultrafiltration, and molecular modeling. Each spectroscopic measurement shows the formation of stable AOH-HSA complexes (K = 4 × 105 L/mol). Investigations with site markers (in spectroscopic and ultrafiltration models) as well as modeling studies suggest that AOH occupies Sudlow's site I as a high-affinity binding site in HSA. The binding affinity of AOH towards bovine, porcine, and rat albumins was also tested, suggesting that AOH binds to rat albumin with considerably higher affinity than other albumins tested. Our results demonstrate the strong interaction of AOH with serum albumins, suggesting the potential in vivo importance of these interactions.

Thermodynamic Characterization of the Interaction between the Antimicrobial Drug Sulfamethazine and Two Selected Cyclodextrins.

Sulfamethazine is a representative member of the sulfonamide antibiotic drugs; it is still used in human and veterinary therapy. The protonation state of this drug affects its aqueous solubility, which can be controlled by its inclusion complexes with native or chemically-modified cyclodextrins. In this work, the temperature-dependent (298-313 K) interaction of sulfamethazine with native and randomly methylated ß-cyclodextrins have been investigated at acidic and neutral pH. Surprisingly, the interaction between the neutral and anionic forms of the guest molecule and cyclodextrins with electron rich cavity are thermodynamically more favorable compared to the cationic guest. This property probably due to the enhanced formation of zwitterionic form of sulfamethazine in the hydrophobic cavities of cyclodextrins. Spectroscopic measurements and molecular modeling studies indicated the possible driving forces (hydrophobic interaction, hydrogen bonding, and electrostatic interaction) of the complex formation, and highlighted the importance of the reorganization of the solvent molecules during the entering of the guest molecule into the host's cavity.

Interaction of Dihydrocitrinone with Native and Chemically Modified Cyclodextrins.

Citrinin (CIT) is a nephrotoxic mycotoxin produced by Aspergillus, Penicillium, and Monascus genera. It appears as a contaminant in grains, fruits, and spices. After oral exposure to CIT, its major urinary metabolite, dihydrocitrinone (DHC) is formed, which can be detected in human urine and blood samples. Cyclodextrins (CDs) are ring-shaped molecules built up from glucose units. CDs can form host-guest type complexes with several compounds, including mycotoxins. In this study, the complex formation of DHC with native and chemically modified beta- and gamma-cyclodextrins was tested at a wide pH range, employing steady-state fluorescence spectroscopic and modeling studies. The weakly acidic environment favors the formation of DHC-CD complexes. Among the CDs tested, the quaternary-ammonium-γ-cyclodextrin (QAGCD) formed the most stable complexes with DHC. However, the quaternary-ammonium-ß-cyclodextrin (QABCD) induced the strongest enhancement in the fluorescence signal of DHC. Our results show that some of the chemically modified CDs are able to form stable complexes with DHC (logK = 3.2-3.4) and the complex formation can produce even a 20-fold increase in the fluorescence signal of DHC. Considering the above-listed observations, CD technology may be a promising tool to increase the sensitivity of the fluorescence detection of DHC.

Interaction of Chrysin and Its Main Conjugated Metabolites Chrysin-7-Sulfate and Chrysin-7-Glucuronide with Serum Albumin.

Chrysin (5,7-dihydroxyflavone) is a flavonoid aglycone, which is found in nature and in several dietary supplements. During the biotransformation of chrysin, its conjugated metabolites chrysin-7-sulfate (C7S) and chrysin-7-glucuronide (C7G) are formed. Despite the fact that these conjugates appear in the circulation at much higher concentrations than chrysin, their interactions with serum albumin have not been reported. In this study, the complex formation of chrysin, C7S, and C7G with human (HSA) and bovine (BSA) serum albumins was investigated employing fluorescence spectroscopic, ultrafiltration, and modeling studies. Our major observations/conclusions are as follows: (1) Compared to chrysin, C7S binds with a threefold higher affinity to HSA, while C7G binds with a threefold lower affinity; (2) the albumin-binding of chrysin, C7S, and C7G did not show any large species differences regarding HSA and BSA; (3) tested flavonoids likely occupy Sudlow's Site I in HSA; (4) C7S causes significant displacement of Sudlow's Site I ligands, exerting an even stronger displacing ability than the parent compound chrysin. Considering the above-listed observations, the high intake of chrysin (e.g., through the consumption of dietary supplements with high chrysin contents) may interfere with the albumin-binding of several drugs, mainly due to the strong interaction of C7S with HSA.

Noncovalent Interaction of Tilmicosin with Bovine Serum Albumin.

Tilmicosin is a widely used antibiotic in veterinary applications. Its antimicrobial activity is ranged from Gram-positive and some Gram-negative bacteria towards activities against Mycoplasma and Chlamydia. Adsorption affinity of tilmicosin antibiotics towards bovine serum albumin was investigated by both spectroscopic (UV-vis, Photoluminescence) and calorimetric methods. The interaction was determined on the basis of quenching of albumin by tilmicosin. Results confirm noncovalent binding of tilmicosin on bovine serum albumin with 1:1 stoichiometry associated with pK = 4.5, highlighting possible removal of tilmicosin molecules from the albumin surface through exchange reactions by known competitor molecules. Calorimetric measurements have confirmed the weak interaction between tilmicosin and albumin and reflect enhanced denaturation of the albumin in the presence of tilmicosin antibiotic. This process is associated with the decreased activation energy of conformational transition of the albumin. It opens a new, very quick reaction pathway without any significant effect on the product by noncovalent binding the tilmicosin molecules to the protein molecules. Results highlight the medical importance of these investigations by considerable docking of the selected antibiotic molecules on serum albumins. Although the binding may cause toxic effects in living bodies, the strength of the binding is weak enough to find competitor molecules for effective removals from their surface.

Complex Formation of Resorufin and Resazurin with Β-Cyclodextrins: Can Cyclodextrins Interfere with a Resazurin Cell Viability Assay?

Resazurin (or Alamar Blue) is a poorly fluorescent dye. During the cellular reduction of resazurin, its highly fluorescent product resorufin is formed. Resazurin assay is a commonly applied method to investigate viability of bacterial and mammalian cells. In this study, the interaction of resazurin and resorufin with ß-cyclodextrins was investigated employing spectroscopic and molecular modeling studies. Furthermore, the influence of ß-cyclodextrins on resazurin-based cell viability assay was also tested. Both resazurin and resorufin form stable complexes with the examined ß-cyclodextrins (2.0-3.1 × 10³ and 1.3-1.8 × 10³ L/mol were determined as binding constants, respectively). Cells were incubated for 30 and 120 min and treated with resazurin and/or ß-cyclodextrins. Our results suggest that cyclodextrins are able to interfere with the resazurin-based cell viability assay that presumably results from the following mechanisms: (1) inhibition of the cellular uptake of resazurin and (2) enhancement of the fluorescence signal of the formed resorufin.

Flow cytometry based rapid duplexed immunoassay for fusarium mycotoxins.

At small food processing facilities, the most frequently used test to determine if grain-derived mycotoxin concentrations are compliant with legal limits is the enzyme-linked immunosorbent assay (ELISA). Each kit is designed to detect one of the six dangerous mycotoxins. With the increasing occurrence of coinfection of grain with multiple-mycotoxins in the field and/or during storage, ELISA is no longer a cost effective best assay option. With ELISA, each species of mycotoxin requires different sample preparation/extraction and a 45 min incubation. The alternative multiplexed assay presented here, the competitive fluorescent microsphere immunoassay (CFIA), follows current food safety standards. It handles several toxins simultaneously with a single universal extraction protocol. The authors' objective was to modify an existing commercial CFIA kit developed for bench top flow cytometry and extend its utility for point-of-need (PON) applications. The accelerated protocol offers over 60% reduction in total processing time and it detects dual mycotoxin contamination simultaneously. The observed enhanced binding kinetics equations reported here utilizing suspended solid phase particles in liquid phase, are also supported by published theoretical calculations. In the near future portable cytometry may bring rapid multiplexed PON testing to assure the safety of small food processing installations. © 2016 International Society for Advancement of Cytometry.