Incidence and outcomes of intraoperative periprosthetic acetabular fractures during cementless total hip arthroplasty: a prospective three-dimensional computer tomography-based study.

PURPOSE: Unlike periprosthetic femoral fractures, periprosthetic acetabular fractures during total hip arthroplasty (THA) have not been evaluated in detail. We prospectively evaluated the incidence, patterns, risk factors, and clinical outcomes of intraoperative periprosthetic acetabular fractures using pre- and postoperative computer tomography (CT). METHODS: In this prospective single-centre study, we evaluated 234 consecutive patients (250 hips) who underwent THA and three-dimensional CT before and after the surgery. We assessed the incidence, pattern of fractures, outcomes for each fracture pattern, reoperation and revision rates, Harris hip score, and visual analog scale (VAS) for pain. Multivariate regression models were used to identify risk factors for periprosthetic acetabular fractures. RESULTS: In total, 43 periprosthetic acetabular fractures (17.2%) were identified via CT. Fractures occurred most frequently at the superolateral wall. Early cup migration occurred in three hips. None of the patients underwent revision surgery for acetabular loosening. Regression modeling showed that rheumatoid arthritis was a significant predictor of periprosthetic acetabular fractures. CONCLUSIONS: Periprosthetic acetabular fractures are not infrequent during cementless THA and are more common in patients with rheumatoid arthritis.

Nitrogen-Doped Titanium Carbide (Ti3 C2 Tx ) MXene Nanosheet Stack For Long-Term Stability and Efficacy in Au and Ag Recovery.

The development of efficient adsorbents for the practical recovery of precious metals from electronic waste is vital to advanced energy/environment industries. Ti3 C2 Tx MXene-based materials are promising adsorbents for aqueous environments; however, the highly defective and super hydrophilic nature of the MXene surface hinders its practical applications. Here, we report that nitrogen-doped MXene (N-MXene) nanosheet stacks, prepared via high-energy planetary ball milling under N2 purging, exhibited a long-term stable and excellent recovery capability for Au and Ag ions via the nitrogenation of defective vacancies. Notably, these microscale nanosheets could facilitate the sustainable production of Au and Ag from secondary sources, exhibiting a high recovery rate and capability (1198 mg g-1 for Au and 1528 mg g-1 for Ag), long-term stable storability (21 d), and high selectivity (Kd of 1.67 × 106 for Au and 2.07 × 107 for Ag). Furthermore, the reversible redox chemistry of N-MXene facilitated its repeated use in adsorption/desorption cycles.

Usefulness of intraoperative C-arm image intensifier in reducing errors of acetabular component during primary total hip arthroplasty: an application of Widmer's method.

BACKGROUND: Acetabular prosthesis positioning in total hip arthroplasty (THA) is crucial in reducing the risk of dislocation. There has been minimal research on the proper way to put the acetabular components into the safe zone intraoperatively. Assessment of version by intraoperative imaging intensifier is very valuable. The value of Widmer's method, using the intraoperative C-arm available to determine cup anteversion was assessed. METHODS: One hundred one hips in 91 patients who underwent primary THA were eligible for inclusion. Utilizing intraoperative C-arm images, measurement was performed using the technique described by Widmer. The values obtained using 3D computed tomography postoperatively, which determined the anteversion of the acetabular component, were regarded as the reference standard. RESULTS: The method of Widmer obtained values similar to those obtained using 3D computed tomography and was considered accurate (n.s.). All 101 hips were positioned in the set target zone. Among the 101 hips, the cup position in nine hips (8.9%) was changed. The dislocation rate in our study was 1.0% with all dislocations occurring in hips placed in the target zone. The mean Harris hip score after THA in 1 year was 94.2 (82-98). CONCLUSIONS: The method of Widmer was accurate using intraoperative imaging intensifier for the measurement of the anteversion of the acetabular component during THA, with reference to the anteversion obtained from the 3D computed tomography. Also, utilizing intraoperative C-arm imaging was very useful because it allowed for correction of the position of the acetabular cup.

Long-Term Results of Total Hip Arthroplasty in Young Patients With Osteonecrosis After Allogeneic Bone Marrow Transplantation for Hematological Disease: A Multicenter, Propensity-Matched Cohort Study With a Mean 11-Year Follow-Up.

BACKGROUND: The number of young patients with hematological disease requiring total hip arthroplasty (THA) is expected to increase. We aimed to investigate the long-term THA outcomes in patients with osteonecrosis of the femoral head (ONFH) following allogeneic bone marrow transplantation (BMT) for hematological disease. METHODS: All patients who underwent THA for osteonecrosis after BMT from 1997 to 2012 were identified at 2 institutions. Using propensity scores, 75 THAs in 45 patients were matched for age, gender, body mass index, American Society of Anesthesiologists score, and year of surgery with 75 THAs in 58 patients with idiopathic ONFH without a history of hematological disease (1:1 ratio). The mean age at surgery was 36.7 years and 52% were men. Clinical and radiographic evaluations were performed and clinical scores were obtained at last follow-up. Kaplan-Meier analyses were used to compare survivorship. RESULTS: At a mean follow-up of 10.6 ± 3.5 years, clinical, radiographic, and survivorship outcomes, and the Harris hip scores were similar between both groups. The 13-year survivorship for all-cause revision was 93.4% for the BMT group and 95% for the control group (P = .928). No significant differences were observed between groups in the rates of reoperation (4% vs 5.3%, P = 1.000), 90-day readmission (all 5.3%), or overall mortality (4.4% vs 1.7%, P = .681). No hips had periprosthetic joint infection or septic loosening in either group. Osteolysis occurred in none of the BMT patients and in 2 hips (2.7%) of the control patients (P = .497). CONCLUSION: This large cohort multicenter survey at 11-year follow-up shows that contemporary cementless THA in young hematological disease patients after allogeneic BMT is not associated with a higher risk for surgical complications, revision, reoperation, readmission, and mortality compared to a matched cohort of idiopathic ONFH.

Satisfaction Survey of Patients and Medical Staff for Telephone-Based Telemedicine During Hospital Closing Due to COVID-19 Transmission.

Introduction: Telephone-based telemedicine was temporarily permitted in Korea during the COVID-19 pandemic. The purpose of this study was to assess satisfaction with the telemedicine done during temporary hospital closing when in-person visits were not allowed due to in-hospital COVID-19 transmission. Methods: Survey questionnaires partially taken from a telehealth usability questionnaire (TUQ) were sent to 6,840 patients who used telephone-based telemedicine from February 24 to March 7, 2020. Questionnaires sent to patients and additionally created questionnaires to evaluate telemedicine were sent to medical staff (182 doctors and 138 nurses). Results: Response rates of patients and medical staff were 13.2% and 17.2%, respectively. Patients' satisfaction with telemedicine was significantly greater than medical staff's satisfaction for all five components taken from TUQ (all p = 0.000). In addition, created questionnaires showed good reliability, obtaining similar results between doctors and nurses (all p > 0.05). More than 85% of medical staff replied that telemedicine was needed in COVID-19, whereas more than 80% of them worried about incomplete assessment and communication of medical condition. Overall satisfaction with telemedicine by medical staff was 49.7%. The strength of telephone-based telemedicine was patients' convenience (53.4%). However, incomplete assessment of patients' condition (55.0%) was its weakness. Conclusion: Satisfaction with telephone-based telemedicine by patients was significantly greater than that by medical staff (doctors and nurses). Negative views for safety and inconvenience resulted in a greater proportion of dissatisfaction among medical staff. For safe application of telemedicine, medical staff insisted that developing a platform and creating guidelines should be needed.

Fourth-generation ceramic-on-ceramic THA results in improvements in midterm outcomes compared to third-generation THA but does not resolve noise problems: a cohort study of a single-hip system.

BACKGROUND: Using data from the Korean Hip Registry, we aimed to investigate mid-term clinical and radiographic outcomes, including the prevalence of periprosthetic joint infection (PJI), osteolysis, and component loosening or dislocation, and to analyze the incidence of bearing-related complications following modern ceramic-on-ceramic (COC) total hip arthroplasty (THA) using a single cementless hip system. METHODS: Four hundred eighty-two patients (602 hips) who underwent Forte or Delta COC THAs with a single hip system and had a minimum 5-year follow-up were identified. The sample included 243 (50.4%) women and 239 (49.6%) men with a mean age of 50.6 years (range: 18-83 years). The Forte group comprised 310 hips, and the Delta group comprised 292 hips. The mean follow-up was 6.1 years (range: 5-10.2 years). RESULTS: Cup orientation did not differ between groups. No hip had a PJI or osteolysis in either group. All acetabular components and all but two femoral components (in the Delta group) were well fixed. Dislocations occurred in six (1.9%) hips in the Forte group and one (0.3%) hip in the Delta group (p = 0.124). A total of nine (1.5%) revisions were performed. The 5-year survival rates for all-cause revisions were 98.4 and 98.6%, respectively. One (0.3%) ceramic head fracture occurred in the Forte group. Sixteen (5%) hips exhibited clicking and 6 (2%) hips had squeaking in the Forte group; 16 (6%) hips exhibited clicking and 5 (2%) hips had squeaking in the Delta group. Multiple regression analysis revealed that noise generation was unassociated with any factor. CONCLUSIONS: From the Korean Hip Registry data, THA with modern ceramic bearings showed encouraging results, with lower risks of PJI, osteolysis, and component loosening. In particular, Delta COC THA resulted in no PJI or ceramic fracture and had a reduced dislocation risk. However, associated noise remains a concern.

Negative Thermal Expansion of Ultrathin Metal Nanowires: A Computational Study.

Most materials expand upon heating because the coefficient of thermal expansion (CTE), the fundamental property of materials characterizing the mechanical response of the materials to heating, is positive. There have been some reports of materials that exhibit negative thermal expansion (NTE), but most of these have been in complex alloys, where NTE originates from the transverse vibrations of the materials. Here, we show using molecular dynamics simulations that some single crystal monatomic FCC metal nanowires can exhibit NTE along the length direction due to a novel thermomechanical coupling. We develop an analytic model for the CTE in nanowires that is a function of the surface stress, elastic modulus, and nanowire size. The model suggests that the CTE of nanowires can be reduced due to elastic softening of the materials and also due to surface stress. For the nanowires, the model predicts that the CTE reduction can lead to NTE if the nanowire Young's modulus is sufficiently reduced while the nanowire surface stress remains sufficiently large, which is in excellent agreement with the molecular dynamics simulation results. Overall, we find a "smaller is smaller" trend for the CTE of nanowires, leading to this unexpected, surface-stress-driven mechanism for NTE in nanoscale materials.

Strong Fermi-Level Pinning at Metal/n-Si(001) Interface Ensured by Forming an Intact Schottky Contact with a Graphene Insertion Layer.

We report the systematic experimental studies demonstrating that a graphene layer inserted at metal/n-Si(001) interface is efficient to explore interface Fermi-level pinning effect. It is confirmed that an inserted graphene layer prevents atomic interdiffusion to form an atomically abrupt Schottky contact. The Schottky barriers of metal/graphene/n-Si(001) junctions show a very weak dependence on metal work-function, implying that the metal Fermi-level is almost completely pinned at charge neutrality level close to the valence band edge of Si. The atomically impermeable and electronically transparent properties of graphene can be used generally to form an intact Schottky contact for all semiconductors.

Hybrid Graphene and Single-Walled Carbon Nanotube Films for Enhanced Phase-Change Heat Transfer.

Nucleate boiling is an effective heat transfer method in power generation systems and cooling devices. In this letter, hybrid graphene/single-walled carbon nanotube (SWCNT), graphene, and SWCNT films deposited on indium tin oxide (ITO) surfaces were fabricated to investigate the enhancement of nucleate boiling phenomena described by the critical heat flux and heat transfer coefficient. The graphene films were grown on Cu foils and transferred to ITO surfaces. Furthermore, SWCNTs were deposited on the graphene layer to fabricate hybrid graphene/SWCNT films. We determined that the hybrid graphene/SWCNT film deposited on an ITO surface is the most effective heat transfer surface in pool boiling because of the interconnected network of carbon structures.

Comparative Analysis of Radiographic Hip Joint Geometry Using Measurement Tools on Picture Archiving and Communication System: A Prospective Study of 100 Pelvic Radiographs of Koreans.

BACKGROUND: A contralateral normal hip joint has been often used as a reference standard in preoperative planning and intraoperative assessment of hip arthroplasty, with the assumption that bilateral hip joint geometries have no significant differences. However, one previous study using analog measurements on hardcopy films reported significant bilateral variation in hip joint geometry. We therefore investigated the level of agreement between the right and left hips for each measurement and determined index values and the range of normal bilateral variations. METHODS: We assessed 100 standard anteroposterior radiographs of the pelvis in this study. Two independent observers measured the actual value of femoral head diameter, location of the femoral head center, acetabular offset, femoral offset, hip offset, greater trochanteric height, neck-shaft angle, medullary canal diameter, and proximal femoral diameter. Intraclass correlation coefficients (ICCs) and values of mean difference were calculated for each measurement. RESULTS: The results demonstrated perfect agreement (ICC >0.8) between the right and left hips for most parameters and substantial agreement for greater trochanteric height (ICC = 0.735) and femoral offset (ICC = 0.773). The mean difference and standard deviation in the measurement between the right and left hips for the location of the femoral head center and the acetabular offset were 0.60 ± 0.48 mm and 0.42 ± 0.30 mm, respectively. CONCLUSION: Hip joint geometry is not influenced by side. In hip arthroplasty, a contralateral normal hip can be reliably used as a guide for preoperative planning using measurement tools on a picture archiving and communication system.

Versatile Clinical Application of the Spike Screw: Direct Anchorage Versus Indirect Anchorage.

OBJECTIVES/INTRODUCTION: This article represents clinical application of spike screw, novel design of miniscrew, for direct anchorage and indirect anchorage in orthodontic treatment. Accompanied by easy placement and removal, the spike screw provides good stability for the orthodontic anchorage. MATERIALS AND METHODS: The spike screw consists of 6 spikes attached to a washer with laser welded stainless-steel hook that is placed by self-drilling fixation miniscrew. The spike screws were applied to correct malocclusions in patients as follows: traction of impacted canines and protraction of posterior teeth as a direct anchorage and correction of midline discrepancy as an indirect anchorage. For orthodontic traction of impacted canines, spike screws were placed in the mandibular labial mucosal area to create extrusive forces. Afterward, it was utilized for the protraction of posterior teeth. In the second case of the indirect anchorage, spike screw was applied on the midpalatal area to correct midline discrepancy that occurred during orthodontic treatment. The extended hook of a washer was prebended along the curvature of the palate and then secured with a mini screw. The extended hook was bonded to maxillary left first molar. RESULTS: In the first case, the spike screw provided adequate anchorage for the vertical traction of horizontally impacted canine. Since the spike screws were placed in the mandibular anterior lesion, the vertical traction force was applied simply with orthodontic elastics. Also, enough distance was achieved for up-down elastics to work by placing the spike screw in the opposite arch. The force of vertical traction was adjusted with selection of size and force of up-down elastics. Later, it was used to provide anchorage for protraction of mandibular molars without changing orientation of the spike screws. In the second case, the spike screw placed in the midpalatal area was attached to the left first molar and worked as an indirect anchorage. The midline discrepancy was resolved by consolidating the spaces to the left with securing the left first molar location. CONCLUSION: The novel design of the spike screw permits clinicians to have minimum invasive and easy placement and removal of the appliance while maintaining a good control over tooth movement with improved stability in various clinical cases.

Comparison of light-emitting diode wavelength on activity and migration of rabbit ACL cells.

The purpose of this study was to evaluate the biological response and gene expression of New Zealand White Rabbit anterior cruciate ligament (ACL) fibroblasts for different wave lengths of light-emitting diode (LED) irradiation. In other words, this study was undertaken to evaluate the effects of different wavelengths of LED irradiation on cell growth, expression of extracellular matrix and growth factors, migration, and expression of actin and integrin. Proliferation assay showed that red (630 nm, 9.5 J/cm(2)) and green LED (530 nm, 9.8 J/cm(2)) irradiated cells were more increased than control group but there was no difference between the control group and the blue LED (460 nm, 27 J/cm(2)) irradiated group. Moreover, the expression of insulin-like growth factor, transforming growth factor-beta (TGF-ß1), and collagen I were significantly increased in the red and green LED-irradiated group, but the expression of collagen was decreased in the blue LED-irradiated group. The results of staining showed that collagen and TGF-ß1 were weaker in the control group and blue LED-irradiated cells, but stronger in the red and green LED-irradiated cells. Also, in the red and green LED-irradiated group, the expression of actin and integrin was not changed compared to the control group, but the expression of actin and integrin was decreased in the blue irradiated group. This study revealed that irradiation with a wavelength of 460 nm (blue LED) is cytotoxic to ACL cells, but irradiation with nontoxic fluencies of 530 (green LED) and 630 nm (red LED) wavelengths induced cell growth in cultured ACL cells.

A novel designed screw with enhanced stability introduces new way of intermaxillary fixation.

INTRODUCTION: This article represents new design of a fixation screw-spike screw-for the intermaxillary elastic fixation application after the first surgery in orthognathic surgery. This new type called spike screw is easily placed and provides enough rigidity for the intermaxillary fixation (IMF) with increased stability that was a common problem using screw-type fixation. MATERIALS AND METHODS: Spike screw has a unique design: a washer with soldered stainless hook that adds stability and fixation to the screw done by a miniscrew. It increases stability by reducing the high peak stress-often occurs in miniscrew-and obtaining the advantage of miniplate system with miniscrew fixation. It allows noninvasive screw placement unlike miniplate. The 8 spike screws were placed on the posterior lesion to provide secure IMF, and 2 I-type C-tubes were placed on the anterior lesion. RESULTS: By modifying the length of the hook attached to a washer can accommodate each patient's IMF length variation like a custom-made screw. The stability of the screw was kept well for 6 weeks even with minor gingival irritation in some of the area. This proved that spike screw could be one of the methods for IMF. The closeness of the hook to the teeth eliminated further gingival irritation around the elastic attachment site. Finally, it provided easy manipulation of the hook to change vectors of the elastic force application. CONCLUSIONS: The novel design of the screw permits easy placement and removal for the IMF. In addition, its advantages include increased stability with unique design, less gingival irritation, and simple vector modification of the IMF elastics by adjusting the hook length and shape.

In situ observations of gas phase dynamics during graphene growth using solid-state carbon sources.

A single-layer graphene has been uniformly grown on a Cu surface at elevated temperatures by thermal processing of a poly(methyl methacrylate) (PMMA) film in a rapid thermal annealing (RTA) system under vacuum. The detailed chemistry of the transition from solid-state carbon to graphene on the catalytic Cu surface was investigated by performing in situ residual gas analysis while PMMA/Cu-foil samples were being heated, in conjunction with interrupted growth studies to reconstruct ex situ the heating process. The data clearly show that the formation of graphene occurs by vaporizing hydrocarbon molecules from PMMA, such as methane and/or methyl radicals, which act as precursors, rather than by the direct graphitization of solid-state carbon. We also found that the temperature for vaporizing hydrocarbon molecules from PMMA and the length of time the gaseous hydrocarbon atmosphere is maintained, which are dependent on both the heating temperature profile and the amount of a solid carbon feedstock, are the dominant factors that determine the crystalline quality of the resulting graphene film. Under optimal growth conditions, the PMMA-derived graphene was found to have a carrier (hole) mobility as high as ∼2700 cm(2) V(-1) s(-1) at room temperature, which is superior to common graphene converted from solid carbon.

Complications and revision rate compared by type of total elbow arthroplasty.

BACKGROUND: This study evaluates the long-term results, including complication and revision rates, of different types of total elbow arthroplasty (TEA) with an average follow up of 13 years. METHODS: Since 1984, a total of 84 primary TEAs have been performed in 77 patients at our institution. The patient's average age was 54.2 years. We performed unlinked TEA in 35 cases (Pritchard ERS since 1984 [n = 18], Kudo type 3 since 1991 [n = 17]), and semi-linked TEA in 49 cases (Pritchard Mark II since 1997 [n = 14], Coonrad-Morrey since 2001 [n = 35]). We assessed the patients for compliance to daily living guidelines (not to exceed 2.25 kg for repetitive lifting and 4.5 kg for single episode lifting), and followed up with them for an average of 13 years after primary TEA. We analyzed their results with regard to complication and revision rates as the type of TEA. RESULTS: The mean Mayo Elbow Performance Score (MEPS) improved from preoperative 34 points to postoperative 84 points. The active flexion-extension elbow motion increased from 25°-94° preoperative to 12°-130° postoperative. The overall complication rate was 44.0% (37/84 cases); the rate was statistically higher in the unlinked group (62.9%, 22/35 cases) than in the semi-linked group (30.6%, 15/49 cases). The overall revision rate was 27.4% (23/84 cases); the rate was higher in the unlinked group (34.3%, 12/35 cases) than in the semi-linked group (22.4%, 11/49 cases). CONCLUSION: Semi-linked TEA has better outcomes than unlinked TEA with respect to complication and revision rates; but continuous efforts to develop a new TEA design for longevity, improved cementing technique, and supporting activities of daily living are needed to reduce complication and revision rates in the future.

A simple method using a PACS to minimize leg length discrepancy in primary THA: a method to minimize leg length discrepancy.

We determined whether a PACS-based method (head-lesser trochanter distance [HLD]) better equalized leg length discrepancy (LLD) after primary THA than a conventional method. We retrospectively reviewed 312 patients (379 hips) with osteonecrosis or primary osteoarthritis who underwent primary cementless THA: 198 patients (240 hips) underwent THA using the HLD method, while the conventional group consisted of 114 patients (139 hips) in whom we measured with the method of McGee and Scott. We then compared the LLDs in the two groups. We observed no difference in the mean postoperative LLD. A higher percentage of patients in the HLD group had an LLD less than 6 mm: 81% vs 68% hips, respectively. HLD method decreases the possibility of an LLD over 6mm after THA.

Weight-Based Bisphosphonate Administration for Multiple Myeloma Patients and the Risks of Skeletal Complications.

High-dose bisphosphonate for multiple myeloma patients might elevate risks of skeletal complications earlier than general expectations. This study aims to find incidences of atypical femoral fracture (AFF) and medication-related osteonecrosis of the jaw (MRONJ), elucidate their risk factors, and suggest cut-off values for the safer dosing of high-dose bisphosphonate treatment. By using the clinical data warehouse of a single institute, retrospective cohort data of multiple myeloma-diagnosed patients with high-dose bisphosphonate (pamidronate or zoledronate) treatment from 2009 to 2019 was extracted. Among 644 patients, the incidence of prominent AFF requiring surgery was 0.93% (6/644) and MRONJ was diagnosed in 11.8% (76/644) of the study population. For both AFF and MRONJ, the total potency-weighted sum of total dose per body weight (OR = 1.010, p = 0.005) were significant on logistic regression. Cutoffs of the potency-weighted total dose (mg) per body weight (kg) for AFF and MRONJ were 77.00 and 57.70 mg/kg, respectively. After roughly one year of treatment with high-dose zoledronate (about four years for pamidronate), an earlier thorough re-evaluation of skeletal complications should be taken. Body weight adjustments for accumulative dose calculation in terms of permissible dosing should be taken into consideration.

The incidence of focal osteonecrosis of the femoral head and its impact on conversion hip arthroplasty after screw fixation of femoral neck fractures: a multicenter retrospective study based on postoperative magnetic resonance imaging.

PURPOSE: Osteonecrosis of the femoral head (ONFH) and subsequent head collapse is a major concern after internal fixation of femoral neck fracture (FNF). Previous studies focused on ONFH incidence using plain radiography; postoperative magnetic resonance imaging (MRI) was rarely performed. We performed a multicenter retrospective study to investigate the incidence of ONFH and the need for conversion hip arthroplasty after FNF screw fixation. METHODS: We reviewed 195 patients who underwent screw fixation during closed FNF reduction between 2012 and 2017 at three institutions. Except for patients who did not consent to MRI, all patients underwent postoperative MRI either 1-3 years after screw fixation. The occurrence of ONFH was investigated through plain radiography and MRI. RESULTS: Thirty patients were diagnosed with ONFH through plain radiography, and an additional 33 patients were diagnosed with MRI, resulting in a total of 63 patients (32.3%) diagnosed with ONFH. The mean time to ONFH diagnosis was 18.9 months and the conversion rate to hip arthroplasty was 10.2%. Of the 33 patients who were normal on hip radiography but exhibited ONFH on MRI, all had small focal lesions not associated with head collapse at the last follow-up. The ONFH group diagnosed through plain radiography had more unstable FNFs than the group diagnosed through MRI. CONCLUSION: Although postoperative MRI revealed a higher incidence of ONFH after FNF screw fixation than reported previously, the small focal MRI lesions were not associated with increased risks of femoral head collapse or conversion to arthroplasty.

Is the construct stability of the acetabular cup affected by the acetabular screw configuration in bone defect models?

BACKGROUND: In revision surgery with significant segmental acetabular defects, adequate implant selection and fixation methods are critical in determining successful bony ingrowth. Commercially available total hip prosthesis manufacturers generally offer additional multi-hole options of acetabular shells with identical designs for use in revision THAs where screw holes configurations vary from product to product. This study aims to compare the mechanical stability of the two types of acetabular screw constructs for the fixation of acetabular components: spread-out and pelvic brim-focused configurations. METHODS: We prepared 40 synthetic bone models of the male pelvis. In half of the samples with acetabular defects, identical curvilinear bone defects were manually created using an oscillating electrical saw. On the right side, multi-hole-cups in which the direction of the screw holes are centered on the pelvic brim (brim-focused) and, on the left side, multi-hole-cups with the direction of the screw hole spread throughout the acetabulum (spread-out) were implanted into the pelvic synthetic bones. Coronal lever-out and axial torsion tests were performed with a testing machine, measuring load versus displacement. RESULTS: The average torsional strengths were significantly higher in the spread-out group over the brim-focused group regardless of the presence of the segmental defect of the acetabulum (p < 0.001). But for the lever-out strength, the spread-out group exhibited significantly higher average strength over the brim-focused group for the intact acetabulum (p = 0.004), whereas the results were reversed in the brim-focused group when the defects were generated (p < 0.001). The presence of acetabular defects reduced the average torsional strengths of the two groups by 68.66% versus 70.86%. In comparison, the decrease in the average lever-out strength was less significant for the brim-focused group than the spread-out group (19.87% vs. 34.25%) (p < 0.001). CONCLUSION: Constructs of multi-hole acetabular cups with the spread-out screw holes configuration exhibited statistically better axial torsional strength and coronal lever-out strength. With the presence of posterior segmental bone defects, the spread-out constructs demonstrated significantly better tolerance to axial torsional strength. Still, they exhibited inverted results of higher lever-out strength in the pelvic brim-focused constructs.

Non-thermal atmospheric pressure plasma treatment increases hydrophilicity and promotes cell growth on titanium alloys in vitro.

Most medical implants are made of titanium. When titanium is exposed to air for a long time, hydrocarbons are deposited and the surface becomes hydrophobic. Cell attachment is important for bone ingrowth to occur on the implant surface, and hydrophilicity can enhance this. We examined whether non-thermal atmospheric pressure plasma treatment could increase the hydrophilicity of the titanium surface. Samples coated with four widely used coating types [grit blasting, micro arc oxidation (MAO), titanium plasma spray (TPS), and direct metal fabrication (DMF)] were treated with plasma. Each of the four surface-treated samples was divided into groups with and without plasma treatment. We analysed wettability by surface analysis and evaluation of contact angles, cell proliferation, and adhesion using scanning electron microscopy (SEM), confocal laser scanning microscopy, absorbance tests, and alkaline phosphatase (ALP) activity assay; four different Ti6Al4V surface types were compared. After plasma treatment, the contact angle was reduced on all surfaces, and the carbon content was reduced on all surfaces based on X-ray photoelectron spectroscopy (XPS) surface analysis. Under confocal laser scanning, the cell layer was thicker on the plasma-treated samples, especially in groups TPS and DMF. Cell proliferation was 41.8%, 17.7%, 54.9%, and 83.8% greater for the plasma- than non-plasma-treated grit blasting, MAO, TPS, and DMF samples, respectively. Hydrophilicity increased significantly under plasma treatment, and biological responsivity was also improved.