RESUMEN
Selective electroreduction of carbon dioxide (CO2RR) into ethanol at an industrially relevant current density is highly desired. However, it is challenging because the competing ethylene production pathway is generally more thermodynamically favored. Herein, we achieve a selective and productive ethanol production over a porous CuO catalyst that presents a high ethanol Faradaic efficiency (FE) of 44.1 ± 1.0% and an ethanol-to-ethylene ratio of 1.2 at a large ethanol partial current density of 501.0 ± 15.0 mA cm-2, in addition to an extraordinary FE of 90.6 ± 3.4% for multicarbon products. Intriguingly, we found a volcano-shaped relationship between ethanol selectivity and nanocavity size of porous CuO catalyst in the range of 0 to 20 nm. Mechanistic studies indicate that the increased coverage of surface-bounded hydroxyl species (*OH) associated with the nanocavity size-dependent confinement effect contributes to the remarkable ethanol selectivity, which preferentially favors the *CHCOH hydrogenation to *CHCHOH (ethanol pathway) via yielding the noncovalent interaction. Our findings provide insights in favoring the ethanol formation pathway, which paves the path toward rational design of ethanol-oriented catalysts.
RESUMEN
Characterized by long-range atomic ordering, well-defined stoichiometry, and controlled crystal structure, intermetallics have attracted increasing attention in the area of chemical synthesis and catalytic applications. Liquid-phase synthesis of intermetallics has arisen as the promising methodology due to its precise control over size, shape, and resistance toward sintering compared with the traditional metallurgy. This short review tends to provide perspectives on the liquid-phase synthesis of intermetallics in terms of both thermodynamics and methodology, as well as its applications in various catalytic reactions. Specifically, basic thermodynamics and kinetics in the synthesis of intermetallics will be first discussed, followed by discussing the main factors that will affect the formation of intermetallics during synthesis. The application of intermetallics in electrocatalysis will be demonstrated case by case at last. We conclude the review with perspectives on the future developments with respect to both synthesis and catalytic applications.
RESUMEN
Fluorinated graphene (FG) showed interesting electrochemical, electronic, and mechanical properties, as well as chemical reactivity for multifarious functionalization of graphene material. This work reported a free radical polymerization and grafting from polymerization of a styrene monomer directly initiated by FG, which simultaneously provided free polymers and functionalized graphene with polymer chains grafted. The FG exhibited an almost comparative initiation efficiency to equivalent commercial initiator azodiisobutyronitrile under similar conditions, resulting in a high yield of free polystyrene (40.9%) with a high molecular weight ( Mn = 114.7 kg/mol). It was demonstrated that FG-triggered polymerization presented some special characteristics, such as a long lifetime of chain radical centers even when the reaction was stopped and insensitivity to oxygen molecules. The mechanistic study indicated that the polymerization was initiated by single-electron transfer reaction between FG and a monomer leading to formation of primary radicals; in addition, FG also played an important role in chain transfer and termination reactions during the polymerization process.
RESUMEN
Conventional approaches to preparing highly fluorinated multiwalled carbon nanotubes (MWCNTs) always require a high temperature. This paper presents a catalytic approach to realizing the effective fluorination of MWNCTs at room temperature (RT). Fe3O4/MWCNTs composites with Fe3O4 loaded on MWCNTs were first prepared using the solvothermal method, followed by fluorination treatment at RT. The attachment of Fe3O4 changes the charge distribution and dramatically improves the fluorination activity of MWCNTs. Consequently, the fluorine content of fluorinated Fe3O4/MWCNTs (F-Fe3O4/MWCNTs) can reach up to 17.13 at% (almost six times that of the unloaded sample) only after fluorination at room temperature, which leads to an obvious decrease in permittivity. Besides, the partial fluorination of Fe3O4 brings about abnormally enhanced permeability due to strengthened exchange resonance. Benefiting from the lower permittivity and higher permeability, F-Fe3O4/CNTs composite exhibits increased impedance matching and thus an enhanced microwave absorption property with a minimal reflection loss of -45 dB at 2.61 mm when the filler content is 13 wt%. The efficient absorption bandwidth (<-10 dB) reaches 4.1 GHz when the thickness is 2.5 mm. This work illustrates a novel catalytic approach to preparing highly fluorinated MWCNTs as promising microwave absorbers, and the design concept can also be extended to the fluorination of other carbon materials.
RESUMEN
A novel approach to prepare crystalline silica through calcination of the composite of silica and highly fluorinated graphene at a relatively low temperature is demonstrated. Silica and its composites with graphene and its derivatives (graphene, graphene oxide and graphene with various degrees of fluorination) were synthesized and then calcined at 900 °C in an air atmosphere. The results of X-ray-diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopy reveal that cristobalite was produced through calcining composites of silica and highly fluorinated graphene under ambient air at a relatively low temperature (900 °C), while for the composites of silica and graphene and its derivatives, the calcined products are all amorphous. Thermal gravimetric analysis results indicate that the maximum decomposition temperature of functional groups in highly fluorinated graphene at air temperature is 457 °C, which is higher than that in medium fluorinated graphene, lower fluorinated graphene and graphene oxide (411.3 °C, 313.4 °C and 238.9 °C). A high degradation temperature of highly fluorinated graphene contributes to strong residual hydrogen bonding interactions at high temperature. FTIR results further illustrate that many residual hydrogen bonding interactions in composites of silica and highly fluorinated graphene at higher temperature result in enough linear structures. As a consequence, stronger residual hydrogen bonding interactions at high temperature in composites of silica and highly fluorinated graphene restrain the self-condensation of Si-OH groups and promote the formation of crystalline structures.
RESUMEN
The investigation of the dispersion behavior of fluorinated MWCNTs (F-MWCNTs) is very important to understand their structure and take full advantage of their good properties. In this present paper, the dispersion behavior of F-MWCNTs with a low content and a high content of fluorine (denoted as lF-MWCNTs and hF-MWCNTs) was explored in 18 kinds of common solvents. The surface of hF-MWCNTs is considered to be a heterostructure consisting of fluorinated regions and aromatic regions, while lF-MWCNTs are inclined to be a homogeneous structure on the basis of their dispersion behavior. According to dispersion theory based on surface energy and Hansen solubility parameters (HSPs), it was indicated that the corresponding preferable solvents are different for different regions. As a result, good solvents of hF-MWCNTs are distributed in a quite wide scope while lF-MWCNTs can be dispersed only in a significantly narrow range of solvents. The HSPs of lF-MWCNTs and hF-MWCNTs are determined to be δD = 17.6 MPa1/2, δP = 11.8 MPa1/2, δH = 8.8 MPa1/2 and δD = 16.9 MPa1/2, δP = 9.3 MPa1/2, δH = 13.5 MPa1/2, respectively. As a result, mixed solvents of acetone and water were carefully tuned to be compatible with hF-MWCNTs. The dispersion behaviors of lF-MWCNTs and hF-MWCNTs in epoxy were also predicted according to HSPs. It was found that hF-MWCNTs maintain a stable dispersion in epoxy due to their heterogeneous structure at elevated temperatures.
RESUMEN
Considering practical applications, the thermal/thermal oxidative stability of fluorinated graphene should be given sufficient attention. Herein, X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA) and Fourier transform infrared spectroscopy (FT-IR) were used to investigate in detail the differences in the thermal stabilities of two types of fluorinated samples, fluorinated graphene (FG) and fluorinated porous graphene (FPG) with various fluorine contents, respectively, as well as the reasons for these differences. It was demonstrated that the thermal stability of FG and FPG was improved upon increasing the fluorine content, which was mainly caused by the enhancement of bond energy of the covalent C-F bonds. Moreover, compared to that of the raw graphene samples, the thermal oxidative stability of FG was reduced due to the defects brought by fluorination, while the thermal oxidative stability of FPG was improved, originating from the inflaming retarding effect of the fluorine element. Interestingly, the thermal oxidative stability of the fluorinated samples was even better than their thermal stability. Using a comparison of the two types of fluorinated samples and support from the computational simulations of the model molecules, it was suggested that a greater amount of CFn (n = 2, 3) groups or defects in the FG samples resulted in its relatively worse thermal stabilities. Furthermore, electron paramagnetic resonance (EPR) spectroscopy was introduced to analyze the thermal stabilities of the fluorinated graphene samples as a novel method. The changes in the spin centers in samples after thermal treatment were studied, which indicated that the lower amount of the more stable spin centers of FPG was another reason leading to its more outstanding thermal stabilities in comparison to FG samples.
RESUMEN
The mechanism of nucleophilic substitution deserves more investigation to include more reaction systems such as two-dimensional (2D) materials. In this study, we used fluorinated graphene (FG) as a representative 2D material to reveal the in-depth mechanism of its defluorination and nucleophilic substitution reaction under attack of common nucleophiles to explore the chemistry of 2D materials and enrich the research on the nucleophilic substitution reaction. DFT calculations and electron paramagnetic resonance spectroscopy (EPR) demonstrated that defluorination of FG occurred via a radical mechanism after a single electron transfer (SET) reaction between the nucleophile and C-F bond, and a spin center was generated on the nanosheet and fluorine anion. Moreover, neither the SN1 nor SN2 mechanism was suggested to be appropriate for the substitution reaction of FG with a 2D structure due to the corresponding kinetics or thermodynamics disadvantage; hence, its nucleophilic substitution was proved to occur via a radical mechanism initiated by the defluorination step. The proposed substitution mechanism of FG demonstrates that nucleophilic substitution via a radical mechanism can also be applied to the attacking process of common nucleophiles without any particular conditions. Furthermore, it has been discovered that triethylamine without active hydrogen can be covalently attached to graphene nanosheets via a nucleophilic substitution reaction with FG; this further indicates a radical process for the nucleophilic substitution of FG rather than an SN1 or SN2 mechanism. The detailed process of the nucleophilic substitution reaction of FG was revealed to occur via a radical mechanism depending on the 2D structure of FG, which could also represent the typical characteristic of 2D chemistry.
RESUMEN
Fluorinated graphene (FG) can be regarded as the representative two-dimensional (2D) material to study the characteristics of "2D chemistry", whereas its derivative reaction mechanism is still required to be revealed for the destination of deciduous fluorine atoms after defluorination of FG. Herein, we proposed a particular derivative reaction of FG by employing 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) as the attacking reagent, and the products were characterized via Electron Paramagnetic Resonance Spectroscopy (EPR), Mass Spectrometry (MS) and X-ray photoelectron spectroscopy (XPS). It was demonstrated that the defluorination caused by TEMPO occurred in a radical mechanism, thus leading to formations of new spin centers on graphene nanosheets as well as C[double bond, length as m-dash]C bonds. More importantly, the deciduous fluorine atoms after defluorination, which existed in TEMPO fluoride molecules, have been detected for the first time. Meanwhile, some TEMPO molecules were covalently grafted on the nanosheet, which resulted from the coupled reaction between TEMPO radical and the spin center on the FG nanosheet. These findings deepen the research of derivative reactions of FG, meanwhile providing a particular view to investigate the chemistry characteristics of 2D materials from a radical mechanism.
RESUMEN
A facile way to prepare fluorinated graphene (FG) with a high fluorine content and controllable structure is important to achieve its full potential application. In this work, it was found that the fluorine to carbon (F/C) ratio of fluorinated graphene oxide (FGO) was nearly twice as much as that of fluorinated chemically reduced graphene oxide (FCrGO) after fluorination at the same temperature. Concerning the detailed effects of oxygenic groups on the fluorination and structure of fluorinated graphene (FG), graphene oxides with different oxygen contents were fluorinated under the same conditions. It was shown that oxygenic groups promote the fluorination reaction by activating the surrounding aromatic regions and taking part in the substitution reaction with fluorine radicals, among which, hydroxyls and carbonyls tend to be replaced by fluorine atoms. Moreover, the fluorination mainly occurs at the edges and defects of graphene sheets with a low oxygen content, while the highly oxidized graphene sheets are fluorinated both at the edges and basal planes simultaneously. This indicates that the quantity and location of the C-F bonds in FGO can be controlled by adjusting the species and content of oxygenic groups in the precursor graphene oxide.
RESUMEN
The attachment of fluorine to graphene is a facile means to activate the carbon bonds for subsequent covalent bonding to other molecules for the preparation of desired graphene derivatives. Therefore, an insight into the chemical reactivity of fluorinated graphene (FG) is very essential to enable precise control of the composition and structure of the final products. In this study, FG has been treated with various mass amounts of poly(oxypropylene)diamine (PEA) ranging from starvation to saturation to explore the dependence of a substitution reaction of diamines on the nature and location (attached onto the basal planes or along defects or edges) of C-F bonds. X-ray photoelectron spectroscopy directly tracked the atomic percentage of fluorine present and the carbon 1s bonding state, showing that the grafting ratio of diamines gradually increases with increased diamine mass ratio. The varying of the types and orientation of C-F bonds characterized by polarized attenuated total reflectance Fourier transform infrared spectroscopy indicates that "covalent" C-F bonds are more sensitive to the substitution reaction of diamines than ''semi-ionic'' C-F bonds, and the C-F bonds attached onto basal planes more preferably participate in the functionalization reaction of diamines than that of C-F bonded on non-coplanar regions (edges or defects). The one-dimensional expansion along the graphene c-axis shown by wide angle X-ray diffraction provides further evidence on the preferred functionalization reaction of C-F attached on the basal planes, resulting in a change of the average intersheet distance by various magnitudes.
RESUMEN
Electrochemical CO2 reduction reaction (eCO2RR) to value-added multicarbon (C2+) products offers a promising approach for achieving carbon neutrality and storing intermittent renewable energy. Copper (Cu)-based electrocatalysts generally play the predominant role in this process. Yet recently, more and more non-Cu materials have demonstrated the capability to convert CO2 into C2+, which provides impressive production efficiency even exceeding those on Cu, and a wider variety of C2+ compounds not achievable with Cu counterparts. This motivates us to organize the present review to make a timely and tutorial summary of recent progresses on developing non-Cu based catalysts for CO2-to-C2+. We begin by elucidating the reaction pathways for C2+ formation, with an emphasis on the unique C-C coupling mechanisms in non-Cu electrocatalysts. Subsequently, we summarize the typical C2+-involved non-Cu catalysts, including ds-, d- and p-block metals, as well as metal-free materials, presenting the state-of-the-art design strategies to enhance C2+ efficiency. The system upgrading to promote C2+ productivity on non-Cu electrodes covering microbial electrosynthesis, electrolyte engineering, regulation of operational conditions, and synergistic co-electrolysis, is highlighted as well. Our review concludes with an exploration of the challenges and future opportunities in this rapidly evolving field.
RESUMEN
Stabilizing active PtNi alloy catalyst toward oxygen reduction reaction is essential for fuel cell. Doping of specific metals is an empirical strategy, however, the atomistic insight into how dopant boosts the stability of PtNi catalyst still remains elusive. Here, with typical examples of Mo and Au dopants, we identify the distinct roles of Mo and Au in stabilizing PtNi nanowires catalysts. Specifically, due to the stronger interaction between atomic orbital for Ni-Mo and Pt-Au, the Mo dopant mainly suppresses the outward diffusion of Ni atoms while the Au dopant contributes to the stabilization of surface Pt overlayer. Inspired by this atomistic understanding, we rationally construct the PtNiMoAu nanowires by integrating the different functions of Mo and Au into one entity. Such catalyst assembled in fuel cell cathode thus presents both remarkable activity and durability, even surpassing the United States Department of Energy technical targets for 2025.
RESUMEN
Electrochemical CO2 reduction reaction (CO2 RR) offers a promising approach to close the anthropogenic carbon cycle and store intermittent renewable energy in fuels or chemicals. On the path to commercializing this technology, achieving the long-term operation stability is a central requirement but still confronts challenges. This motivates to organize the present review to systematically discuss the stability issue of CO2 RR. This review starts from the fundamental understanding on the destabilization mechanisms of CO2 RR, with focus on the degradation of electrocatalyst and change of reaction microenvironment during continuous electrolysis. Subsequently, recent efforts on catalyst design to stabilize the active sites are summarized, where increasing atomic binding strength to resist surface reconstruction is highlighted. Next, the optimization of electrolysis system to enhance the operation stability by maintaining reaction microenvironment especially mitigating flooding and carbonate problems is demonstrated. The manipulation on operation conditions also enables to prolong CO2 RR lifespan through recovering catalytically active sites and mass transport process. This review finally ends up by indicating the challenges and future opportunities.
RESUMEN
Metallic nanorings (NRs) with open hollow structures are of particular interest in energy-related catalysis due to their unique features, which include the high utilization of active sites and facile accessibility for reactants. However, there is still a lack of general methods for synthesizing Pd-based multimetallic NRs with a high catalytic performance. Herein, we develop a template-directed strategy for the synthesis of ultrathin PdM (M = Bi, Sb, Pb, BiPb) NRs with a tunable size. Specifically, ultrathin Pd nanosheets (NSs) are used as a template to steer the deposition of M atoms and the interatomic diffusion between Pd and M, subsequently resulting in the hollow structured NRs. Taking the ethanol oxidation reaction (EOR) as a proof-of-concept application, the PdBi NRs deliver a substantially improved activity relative to the Pd NSs and commercial Pd/C catalysts, simultaneously showing outstanding stability and CO tolerance. Mechanistically, density functional theory (DFT) calculations disclose that the incorporation of Bi reduces the energy barrier of the rate-determining step in the EOR C2-path, which, together with the high ratio of exposed active sites, endows the PdBi NRs with an excellent EOR activity. We believe that our work can illuminate the general synthesis of multimetallic NRs and the rational design of advanced electrocatalysts.
RESUMEN
Electrochemical CO2 reduction to multicarbon products faces challenges of unsatisfactory selectivity, productivity, and long-term stability. Herein, we demonstrate CO2 electroreduction in strongly acidic electrolyte (pH ≤ 1) on electrochemically reduced porous Cu nanosheets by combining the confinement effect and cation effect to synergistically modulate the local microenvironment. A Faradaic efficiency of 83.7 ± 1.4% and partial current density of 0.56 ± 0.02 A cm-2, single-pass carbon efficiency of 54.4%, and stable electrolysis of 30 h in a flow cell are demonstrated for multicarbon products in a strongly acidic aqueous electrolyte consisting of sulfuric acid and KCl with pH ≤ 1. Mechanistically, the accumulated species (e.g., K+ and OH-) on the Helmholtz plane account for the selectivity and activity toward multicarbon products by kinetically reducing the proton coverage and thermodynamically favoring the CO2 conversion. We find that the K+ cations facilitate C-C coupling through local interaction between K+ and the key intermediate *OCCO.
Asunto(s)
Dióxido de Carbono , Electrólitos , Electrólisis , Protones , CarbonoRESUMEN
We report the first successful covalent modification of fluorographene (FG) based on Suzuki-Miyaura reaction of the C-F bond. The origin of the reaction efficiency of the C-F bond can be linked to the two-dimensional structure of FG and the synergistic effect of a phosphine ligand. This extends the application of the Suzuki reaction of the C-F bond into two-dimensional chemistry.
RESUMEN
Aromatic macromolecules tend to form a compact conformation after physically adsorbed on graphene and it brings about great entropy loss for physisorption, due to the strong interaction between aromatic macromolecules and graphene. However, previous researches have validated the availability of aromatic macromolecules to stabilize graphene based on physisorption. In order to clarify the underlying mechanism of this physisorption process on graphene, a series of aromatic polyamide copolymers are used as models in this research. Apart from their adsorbed conformations on graphene, the conformations of these copolymers as the free states in diluted solutions are taken into consideration. Although these copolymers present the fully extended conformation on graphene, their conformations in diluted solutions vary largely with the copolymer composition. It is verified that the copolymer with smaller conformational change could have the better stabilization effectiveness for graphene, rather than the one having stronger interaction with graphene. Therefore, the entropy-tailored behavior for the adsorption of aromatic macromolecules on graphene is put forward. Based on this mechanism, the chemical structure of aromatic polyamide is optimized and furthermore it is utilized to directly exfoliate natural graphite flakes. Eventually, high-quality graphene nanosheets with a large dimension and low defects are obtained. Moreover, its exfoliating effectiveness is superior to those of the commonly used exfoliating agents nowadays.
RESUMEN
[This corrects the article DOI: 10.1039/C9SC00975B.].
RESUMEN
A direct gas-solid reaction between fluorine gas (F2) and graphene is expected to become an inexpensive, continuous and scalable production method to prepare fluorinated graphene. However, the dependence of the fluorination intercalation of graphene is still poorly understood, which prevents the formation of high-quality fluorinated graphene. Herein, we demonstrate that chemical defects (oxygen group defects) on graphene sheets play a leading role in promoting fluorination intercalation, whereas physical defects (point defects), widely considered to be an advantage due to more diffusion channels for F2, were not influential. Tracing the origins, compared with the point defects, the unstable hydroxyl and epoxy groups produced active radicals and the relatively stable carbonyl and carboxyl groups activated the surrounding aromatic regions, thereby both facilitating fluorination intercalation, and the former was a preferential and easier route. Based on the above investigations, we successfully prepared fluorinated graphene with an ultrahigh interlayer distance (9.7 Å), the largest value reported for fluorinated graphene, by customizing graphene with more hydroxyl and epoxy groups. It presented excellent self-lubricating ability, with an ultralow interlayer interaction of 0.056 mJ m-2, thus possessing a far lower friction coefficient compared with graphene, when acting as a lubricant. Moreover, it was also easy to exfoliate by shearing, due to the diminutive interlayer friction and eliminated commensurate stacking. The exfoliated number of layers of less than three exceeded 80% (monolayer rate ≈ 40%), and no surfactant was applied to prevent further stacking.