RESUMEN
Boron nitride nanotubes (BNNTs) are an emerging class of molecular container offering new functionalities and possibilities for studying molecules at the nanoscale. Herein, BNNTs are demonstrated as highly effective nanocontainers for polyoxometalate (POM) molecules. The encapsulation of POMs within BNNTs occurs spontaneously at room temperature from an aqueous solution, leading to the self-assembly of a POM@BNNT host-guest system. Analysis of the interactions between the host-nanotube and guest-molecule indicate that Lewis acid-base interactions between WâO groups of the POM (base) and B-atoms of the BNNT lattice (acid) likely play a major role in driving POM encapsulation, with photoactivated electron transfer from BNNTs to POMs in solution also contributing to the process. The transparent nature of the BNNT nanocontainer allows extensive investigation of the guest-molecules by photoluminescence, Raman, UV-vis absorption, and EPR spectroscopies. These studies revealed considerable energy and electron transfer processes between BNNTs and POMs, likely mediated via defect energy states of the BNNTs and resulting in the quenching of BNNT photoluminescence at room temperature, the emergence of new photoluminescence emissions at cryogenic temperatures (<100 K), a photochromic response, and paramagnetic signals from guest-POMs. These phenomena offer a fresh perspective on host-guest interactions at the nanoscale and open pathways for harvesting the functional properties of these hybrid systems.
Asunto(s)
Nanotubos , Nanotubos/química , Compuestos de Boro/químicaRESUMEN
Selective semi-oxidation of tetrahydroisoquinoline (THIQ) leads to a valuable dihydroisoquinoline (DHIQ) derivative via singlet oxygen photooxidation process. Typical photosensitisers (i.e., Ru complexes) can activate the reaction even under heterogeneous conditions that facilitate catalyst separation and reusability. In contrast to DHIQ, THIQ acts as an efficient singlet oxygen quencher driving the reaction selectivity. The reaction can also be facilitated by semiconductor catalysts such as MoCo@GW, a glass wool-based catalyst that is easy to separate and reuse and compatible with flow photochemistry. Its role is to mediate the formation of isoquinoline (IQ) and thus an in situ-generated singlet oxygen catalyst. Laser flash photolysis with NIR detection provides proof of the singlet oxygen mechanism proposed and rate constants for the key steps that mediate the oxidation.
Asunto(s)
Oxígeno Singlete , Tetrahidroisoquinolinas , Cinética , Oxidación-Reducción , Oxígeno , Fotoquímica , Oxígeno Singlete/químicaRESUMEN
The absence of a secure long-term sustainable energy supply is recognized as a major worldwide technological challenge. The generation of H2 through photocatalysis is an environmentally friendly alternative that can help solve the energy problem. Thus, the development of semiconductor materials that can absorb solar light is an attractive approach. TiO2 has a wide bandgap that suffers from no activity in the visible spectrum, limiting its use of solar radiation. In this research, the semiconductor absorption profile was extended into the visible region of the solar spectrum by preparing porphyrin-TiO2 (P-TiO2) composites of meso-tetra(4-bromophenyl)porphyrin (PP1) and meso-tetra(5-bromo-2-thienyl)porphyrin (PP2) and their In(III), Zn(II) and Ga(III) metal complexes. Density functional theory (DFT) and time-dependent density functional theory (TD-DFT) calculations were performed on the porphyrins to gain insight into their electron injection capability. The results demonstrate that P-TiO2 systems merit further in-depth study for applications that require efficient photocatalytic H2 generation.
RESUMEN
We report a novel way to promote photochemical benzylic radical arylations using Pd nanostructures. Traditional benzylic radical reaction pathways are challenged by the presence of metal centres that provoke unprecedented regioselectivity towards more synthetically relevant C(sp3)-C(sp2) couplings. This new C-H activation pathway is rationalised by means of a pseudo-persistent radical effect facilitated by metal centres. We show the mechanistic and computational aspects of the heterogeneous photocatalytic processes that are the root of this drastic change in reactivity.
RESUMEN
Photogenerated holes in nanometric semiconductors, such as TiO2, constitute remarkable powerful electrophilic centers, capable of capturing an electron from numerous donors such as ethers, or nonactivated substrates like toluene or acetonitrile, and constitute an exceptionally clean and efficient source of free radicals. In contrast with typical free radical precursors, semiconductors generate single radicals (rather than pairs), where the precursors can be readily removed by filtration or centrifugation after use, thus making it a convenient tool in organic chemistry. The process can be described as an example of dystonic proton coupled electron transfer.
RESUMEN
A mechanistic study is herein presented for the use of heterogeneous photocatalysts based on perylene moieties. First, the successful immobilization of perylene diimides (PDI) on silica matrices is demonstrated, including their full characterization by means of electronic microscopy, surface area measurements, powder XRD, thermogravimetric analysis, and FTIR, 29 Si and 13 C solid-state NMR, fluorescence, and diffuse reflectance spectroscopies. Then, the photoredox activity of the material was tested by using two model reactions, alkene oxidation and 4-nitrobenzylbromide reduction, and mechanistic studies were performed. The mechanistic insights into their photoredox activity show they have promising dual photocatalytic activity for both organic oxidations and reductions.
RESUMEN
Upon UVA irradiation, aryl halides can undergo dehalogenation in the presence of bases and methanol as a hydrogen donor. This catalyst-free photochemical dehalogenation is furnished through a facile radical chain reaction under mild conditions. The chain reaction follows UVA irradiation of the reaction mixture in a transition-metal-free environment. Mechanistic studies support a chain mechanism in which initiation involves absorption by a methoxide-bromoarene complex facilitated by halogen-bonding interactions. The methoxide-bromine interaction leads to a weakened Br-C bond that is prone to facile cleavage during the initiation and propagation steps.
RESUMEN
In this contribution, we examine the photophysical properties of 15 totally trans-trans 1,4-distyrylbenzene derivatives (DSBs) functionalized with different electron-donating (ED) and electron-withdrawing (EW) groups by experimental and computational methodologies. We use UV-vis and fluorescence spectroscopies to determine the experimental optical properties such as the maximum absorption (λabsexp) and emission (λemexp) wavelengths, the highest occupied molecular orbital-lowest unoccupied molecular orbital (HOMO-LUMO) energy gaps (ΔEabsexp), the molar extinction coefficients (ε), the fluorescence quantum yields (Φf), and the fluorescence lifetimes (τ). We also calculate the experimental spontaneous emission decay rate (krexp) and correlate all of these magnitudes to the corresponding calculated properties, maximum absorption (λabscal) and emission (λemcal) wavelengths, vertical transition energies (ΔEabscal), oscillator strength (Fosc), and spontaneous emission decay rate (krcal), obtained by the time-dependent density functional theory method. We analyze the effect of the electronic nature of the substituents on the properties of the DSBs, finding that the ED and EW groups lead to bathochromic shifts. This is consistent with the decrease of ΔE values as the strength of ED and EW substituents increases. We find excellent correlations between calculated and experimental values for λabs, λem, and ΔEabs (r â¼ 0.99-0.95). Additionally, the correlations between the relative ε with Fosc values and the kr values are in good agreement (r â¼ 0.88-0.72) with the experimental properties. Overall, we find that for substituted 1,4-DSBs, computational chemistry is an excellent tool to predict structure-property relationships, which can be useful to forecast the properties of their polymeric analogues, which are usually difficult to determine experimentally.
RESUMEN
Reduced graphene oxide modified by pulsed laser ablation causes water splitting under visible light illumination (532 nm). When the light source is a pulsed laser, water splitting is accompanied by carbon gasification (CO formation); however, conventional (LED) light sources produce water splitting exclusively.
RESUMEN
We use the aurophilic interactions shown by lanthanides to overcome the sulfur-gold interaction. UV-vis and X-ray photoelectron spectroscopy confirm that yttrium or lanthanide chlorides easily displace sulfur ligands from the surface of thiol-stabilized gold nanoparticles.
RESUMEN
Single molecule spectroscopy (SMS) has matured to a point where it can be used as a convenient tool to guide organic synthesis and drug discovery, particularly applicable to catalytic systems where questions related to homogeneous vs heterogeneous pathways are important. SMS can look at intimate mechanistic details that can inspire major improvements of the catalyst performance, its recovery, and reuse. Here, we use the click reaction between alkynes and azides as an example where improvements at the bench have been inspired and validated using single-molecule fluorescence spectroscopy.
RESUMEN
The photophysical behaviour of 7-mercapto-4-methylcoumarin (C-SH) and derivatives has been studied in different solvents. In contrast to 7-hydroxy-4-methylcoumarin, C-SH shows poor emission, but high fluorescence when the thiol is alkylated. The origin and character of the lowest singlet states are discussed, specifically proposing that the thione-like C[double bond, length as m-dash]S resonance form plays a key role in excited state deactivation in C-SH.
RESUMEN
Copper-doped semiconductors are designed to photoassist the alkyne-azide cycloaddition catalysis by Cu(I). Upon irradiation, injection of electrons from the semiconductor into copper oxide nanostructures produces the catalytic Cu(I) species. The new catalysts are air- and moisture-tolerant and can be readily recovered after use and reused several times.
RESUMEN
The ability to drive reactivity using visible light is of importance for many disciplines of chemistry and has significant implications for sustainable chemistry. Identifying photochemically active compounds and understanding photochemical mechanisms is important for the development of useful materials for synthesis and catalysis. Here we report a series of photoactive diphenyltellurophene compounds bearing electron-withdrawing and electron-donating substituents synthesized by alkyne coupling/ring closing or palladium-catalyzed ipso-arylation chemistry. The redox chemistry of these compounds was studied with respect to oxidative addition and photoelimination of bromine, which is of importance for energy storage reactions involving X2. The oxidative addition reaction mechanism was studied using density functional theory, the results of which support a three-step mechanism involving the formation of an initial η(1) association complex, a monobrominated intermediate, and finally the dibrominated product. All of the tellurophene derivatives undergo photoreduction using 430, 447, or 617 nm light depending on the absorption properties of the compound. Compounds bearing electron-withdrawing substituents have the highest photochemical quantum efficiencies in the presence of an alkene trap, with efficiencies of up to 42.4% for a pentafluorophenyl-functionalized tellurophene. The photoelimination reaction was studied in detail through bromine trapping experiments and laser flash photolysis, and a mechanism is proposed. The photoreaction, which occurs by release of bromine radicals, is competitive with intersystem crossing to the triplet state of the brominated species, as evidenced by the formation of singlet oxygen. These findings should be useful for the design of new photochemically active compounds supported by main-group elements.
RESUMEN
Visible-light excitation of the surface plasmon band of silver nanoplates can effectively localize and concentrate the incident electromagnetic field enhancing the photochemical performance of organic molecules. Herein, the first single-molecule study of the plasmon-assisted isomerization of a photochrome-fluorophore dyad, designed to switch between a nonfluorescent and a fluorescent state in response to the photochromic transformation, is reported. The photochemistry of the switchable assembly, consisting of a photochromic benzooxazine chemically conjugated to a coumarin moiety, is examined in real time with total internal reflection fluorescence microscopy in the presence of silver nanoplates excited with a 633â nm laser. The metallic nanostructures significantly enhance the visible light-induced performance of the photoconversion, which normally requires ultraviolet excitation. The resulting ring-open isomer is strongly fluorescent and can also be excited at 633â nm. These stochastic emission events are used to monitor photochromic activation and show quadratic dependence on incident power. The utilization of a single laser wavelength for both photochromic activation and excitation effectively mimics a pseudo two-colours system.
RESUMEN
The growing number of innovations in nanomedicine and nanobiotechnology are posing new challenges in understanding the full spectrum of interactions between nanomateriales and biomolecules at nano-biointerfaces. Although considerable achievements have been accomplished by in vivo applications, many issues regarding the molecular nature of these interactions are far from being well-understood. In this work, we evaluate the interaction of hydrophobic magnetic nanoparticles (MNP) covered with a single layer of oleic acid with saturated and unsaturated phospholipids found in biomembranes through the use of Langmuir monolayers. We find distinctive interactions among the MNP with saturated and unsaturated phospholipids that are reflected by both, the compression isotherms and the surface topography of the films. The interaction between MNP and saturated lipids causes a noticeable reduction of the mean molecular area in the interfacial plane, while the interaction with unsaturated lipids promotes area expansion compared to the ideally mixed films. Moreover, when liquid expanded and liquid condensed phases of the phospholipid(s) coexist, the MNP preferably partition to the liquid-expanded phase, thus hindering the coalescence of the condensed domains with increasing surface pressure. In consequence organizational information on long-range order is attained. These results evidence the existence of a sensitive composition-dependent surface regulation given by phospholipid-nanoparticle interactions which enhance the biophysical relevance of understanding nanoparticle surface functionalization in relation to its interactions in biointerfaces constituted by defined types of biomolecules.
Asunto(s)
Campos Magnéticos , Nanopartículas/química , Ácido Oléico/química , Fosfolípidos/químicaRESUMEN
Water decontamination remains a challenge in several developed and developing countries. Affordable and efficient approaches are needed urgently. In this scenario, heterogeneous photocatalysts appear as one of the most promising alternatives. This justifies the extensive attention that semiconductors, such as TiO2, have gained over the last decades. Several studies have evaluated their efficiency for environmental applications; however, most of these tests rely on the use of powder materials that have minimal to no applicability for large-scale applications. In this work, we investigated three fibrous TiO2 photocatalysts, TiO2 nanofibers (TNF), TiO2 on glass wool (TGW), and TiO2 in glass fiber filters (TGF). All materials have macroscopic structures that can be easily separated from solutions or that can work as fixed beds under flow conditions. We evaluated and compared their ability to bleach a surrogate dye molecule, crocin, under batch and flow conditions. Using black light (UVA/visible), our catalysts were able to bleach a minimum of 80% of the dye in batch experiments. Under continuous flow experiments, all catalysts could decrease dye absorption under shorter irradiation times: TGF, TNF, and TGW could, respectively, bleach 15, 18, and 43% of the dye with irradiation times as short as 35 s. Catalyst comparison was based on the selection of physical and chemical criteria relevant for application on water remediation. Their relative performance was ranked and applied in a radar plot. The features evaluated here had two distinct groups, chemical performance, which related to the dye degradation, and mechanical properties, which described their applicability in different systems. This comparative analysis gives insights into the selection of the right flow-compatible photocatalyst for water remediation.
RESUMEN
A catalyst based on Pd on glass wool (Pd@GW) shows exceptional performance and durability for the reduction of nitrobenzene to aniline at room temperature and ambient pressure in aqueous solutions. The reaction is performed in a flow system and completed with 100% conversion under a variety of flow rates, 2 to 100 mLmin-1 (normal laboratory fast flow conditions). Sodium borohydride or dihydrogen perform well as reducing agents. Scale-up of the reaction to flows of 100 mLmin-1 also shows high conversions and robust catalytic performance. Catalyst deactivation can be readily corrected by flowing a NaBH4 solution. The catalytic system proves to be generally efficient, performing well with a range of nitroaromatic compounds. The shelf life of the catalyst is excellent and its reusability after 6-8 months of storage showed the same performance as for the fresh catalyst.
RESUMEN
The photodecomposition of azides to generate nitrenes usually requires wavelengths in the <300 nm region. In this study, we show that this reaction can be readily performed in the UVA region (368 nm) when catalyzed by Pd-decorated TiO2. In aqueous medium the reaction leads to amines, with water acting as the H source; however, in non-protic and non-nucleophilic media, such as acetonitrile, nitrenes recombine to yield azo compounds, while azirine-mediated trapping occurs in the presence of nucleophiles. The heterogeneous process facilitates catalyst separation while showing great chemoselectivity and high yields.
RESUMEN
The use of heterogeneous catalysis has key advantages compared to its homogeneous counterpart, such as easy catalyst separation and reusability. However, one of the main challenges is to ensure good performance after the first catalytic cycles. Active catalytic species can be inactivated during the catalytic process leading to reduced catalytic efficiency, and with that loss of the advantages of heterogeneous catalysis. Here we present an innovative approach in order to extend the catalyst lifetime based on the crop rotation system used in agriculture. The catalyst of choice to illustrate this strategy, Pd@TiO2, is used in alternating different catalytic reactions, which reactivate the catalyst surface, thus extending the reusability of the material, and preserving its selectivity and efficiency. As a proof of concept, different organic reactions were selected and catalyzed by the same catalytic material during target molecule rotation.