RESUMEN
Many existing synthetic hydrogels are inappropriate for repetitive motions because of large hysteresis, and their mechanical properties in warm and saline physiological conditions remain understudied. In this study, a stretch-rate-independent, hysteresis-free, elastic, and tough nanocomposite hydrogel that can maintain its mechanical properties in phosphate-buffered saline of 37 °C similar to warm and saline conditions of the human body is developed. The strength, stiffness, and toughness of the hydrogel are simultaneously reinforced by biomimetic silica nanoparticles with a surface of embedded circular polyamine chains. Such distinctive surfaces form robust interfacial interactions by local topological folding/entanglement with the polymer chains of the matrix. Load transfer from the soft polymer matrix to stiff nanoparticles, along with the elastic sliding/unfolding/disentanglement of polymer chains, overcomes the traditional trade-off between strength/stiffness and toughness and allows for hysteresis-free, strain-rate-independent, and elastic behavior. This robust reinforcement is sustained in warm phosphate-buffered saline. These properties demonstrate the application potential of the developed hydrogel as a soft, elastic, and tough bio-strain sensor that can detect dynamic motions across various deformation speeds and ranges. The findings provide a simple yet effective approach to developing practical hydrogels with a desirable combination of strength/stiffness and toughness, in a fully swollen and equilibrated state.
RESUMEN
We present an innovative solvent-free micromolding technique for rapidly fabricating complex polymer microparticles with three-dimensional (3D) shapes utilizing a surface tension-induced dipping process. Our fabrication process involves loading a photocurable solution into micromolds through mold dipping. The loaded solution, induced by surface tension, undergoes spatial deformation upon mold removal caused by surface forces, ultimately acquiring an anisotropic shape before photopolymerization. Results show that the amount of photocurable solution loaded depends on the degree of capillary penetration, which can be adjusted by varying the dipping time and mold height. It enables the production of polymer particles with precisely controlled 3D shapes without diluting them with volatile organic solvents. Sequential micromolding enables the spatial stacking of the polymer domain through a bottom-up approach, facilitating the creation of complex multicompartmental microparticles with independently controlled compartments. Finally, we demonstrated the successful simultaneous conjugation of multiple model-fluorescent proteins through the biofunctionalization of microparticles, indicating functional stability and effective conjugation of hydrophilic molecules such as proteins. We also extend our capacity to create bicompartmental microparticles with distinct functionalities in each compartment, revealing spatially controlled functional structures. In summary, these findings demonstrate a straightforward, rapid, and reliable method for producing highly uniform complex particles with precise control over the 3D shape and compartmentalization, all accomplished without the use of organic solvents.
RESUMEN
Staphylococcus aureus is a major pathogen that causes infections and life-threatening diseases. Although antibiotics, such as methicillin, have been used, methicillin-resistant S. aureus (MRSA) causes high morbidity and mortality rates, and conventional detection methods are difficult to be used because of time-consuming process. To control the spread of S. aureus, a development of a rapid and simple detection method is required. In this study, we generated a fluorescent anti-S. aureus antibody, and established a novel fluorescence-linked immunosorbent assay (FLISA)-based S. aureus detection method. The method showed high sensitivity and low limit of detection toward MRSA detection. The assay time for FLISA was 5 h, which was faster than that of conventional enzyme-linked immunosorbent assay (ELISA) or rapid ELISA. Moreover, the FLISA-based detection method was applied to diagnose clinically isolated MRSA samples that required only 5.3 h of preincubation. The FLISA method developed in this study can be widely applied as a useful tool for convenient S. aureus detection. KEY POINTS: ⢠A fluorescence-linked immunosorbent assay-based S. aureus detection method ⢠Simultaneous quantification of a maximum of 96 samples within 5 h ⢠Application of the novel system to diagnosis clinical isolates.
Asunto(s)
Staphylococcus aureus Resistente a Meticilina , Infecciones Estafilocócicas , Humanos , Inmunoadsorbentes , Staphylococcus aureus , Ensayo de Inmunoadsorción Enzimática , Infecciones Estafilocócicas/diagnóstico , AnticuerposRESUMEN
Digital PCR (dPCR) has become indispensable in nucleic acid (NA) detection across various fields, including viral diagnostics and mutant detection. However, misclassification of partitions in dPCR can significantly impact accuracy. Despite existing methods to minimize misclassification bias, accurate classification remains elusive, especially for nonamplified target partitions. To address these challenges, this study introduces an innovative microdroplet-based competitive PCR platform for nucleic acid quantification in microfluidic devices independent of Poisson statistics. In this approach, the target concentration (T) is determined from the concentration of competitor DNA (C) at the equivalence point (E.P.), where C/T is 1. Competitive PCR ensures that the ratio of target to competitor DNA remains constant during amplification, reflected in the resultant fluorescence intensity, allowing the quantification of target DNA concentration at the equivalence point. The unique amplification technique eliminates Poisson distribution, addressing misclassification challenges. Additionally, our approach reduces the need for post-PCR procedures and shortens analytical time. We envision this platform as versatile, reproducible, and easily adaptable for driving significant progress in molecular biology and diagnostics.
Asunto(s)
ADN , ADN/química , Distribución de Poisson , Ensayo de Materiales , Reacción en Cadena de la Polimerasa , Ácidos Nucleicos/análisis , Materiales Biocompatibles/química , Tamaño de la Partícula , Dispositivos Laboratorio en un ChipRESUMEN
The effects of the operating conditions, including the applied pressure, feed organic concentration, and recirculation flowrate along the TiO2-coated ceramic membrane, on the normalized membrane permeability and organic removal efficiency were systematically investigated by operating a photocatalytic membrane reactor (PMR). Response surface methodology (RSM) was conducted to better understand the interactive effect of operational conditions as well as their individual and combined effects to control membrane performance. Our results showed that the applied pressure and feed organic concentration, as single parameter, affected the normalized membrane permeability and organic removal efficiency more dominantly than the recirculation flowrate. The polynomial performance equations generated by RSM successfully predicted the membrane performance of the PMR. The responses to the normalized membrane permeability and organic removal efficiency with respect to the operational conditions were less sensitive to any combination of operational conditions than to their individual impacts. The combined effects of the operating conditions were less pronounced in promoting the catalytic performance of organic contaminants on the TiO2 surface. Our RSM analysis based on experimental observations designed by Box-Behnken Design (BBD) suggested that 1.3 bar of applied pressure, 44 mg/L of feed organic dye concentration and 0.8 L/min as recirculation flowrate as optimum conditions achieved more than 98% of organic removal efficiency and less than 5% of decline in normalized membrane permeability. This research shows that the RSM provides effective tool to optimize operational conditions to determine fouling rate and organic removal in PMR.
Asunto(s)
Cerámica , Filtración , Membranas Artificiales , Titanio , Cerámica/química , Filtración/métodos , Titanio/química , Catálisis , Hidrodinámica , Contaminantes Químicos del Agua/análisis , Contaminantes Químicos del Agua/química , Purificación del Agua/métodos , Eliminación de Residuos Líquidos/métodos , PermeabilidadRESUMEN
The utilization of gold nanoparticles (AuNPs) has garnered significant attention in recent times, particularly in the field of biomedical research. The utilization of AuNPs in chemical synthesis procedures raises apprehensions regarding their potential toxicity in living organisms, which is inconsistent with their purported eco-friendly and cost-effective aspects. In this investigation, AuNPs were synthesized via the green synthesis approach utilizing Jeju Hallabong peel extract (HPE), a typical fruit variety indigenous to South Korea. The visible-range absorption spectrum of gold nanoparticles from green synthesis (HAuNPs) that are red wine in color occurs at a wavelength of λ = 517 nm. The morphology and particle size distribution were analysed using transmission electron microscopy (TEM) and ImageJ software. The TEM images reveal that the HAuNPs exhibit a high degree of dispersion and uniformity in their spherical shape, with an average size of approximately 7 nm. Moreover, elevating the initial pH level of the mixed solution has an impact on the decrease in particle dimensions, as evidenced by the blue shift observed in the UV-visible spectroscopy absorbance peak. Elevating the reaction temperature may accelerate the synthesis duration. However, it does not exert a substantial impact on the particle dimensions. The outcomes of an avidin-biocytin colorimetric assay provide preliminary analyses of possible sensor tunability using HAuNPs. The cytotoxicity of HAuNPs was evaluated through in vitro studies using the MTT assay on RAW 264.7 cell lines. The results indicated that the HAuNPs exhibited lower cytotoxicity compared to both chemically reduced gold nanoparticles (CAuNPs).
RESUMEN
Building on the preceding structural analysis and a structure-activity relationship (SAR) of 8-aryl-2-hexynyl nucleoside hA2AAR antagonist 2a, we strategically inverted C2/C8 substituents and eliminated the ribose moiety. These modifications aimed to mitigate potential steric interactions between ribose and adenosine receptors. The SAR findings indicated that such inversions significantly modulated hA3AR binding affinities depending on the type of ribose, whereas removal of ribose altered the functional efficacy via hA2AAR. Among the synthesized derivatives, 2-aryl-8-hexynyl adenine 4a demonstrated the highest selectivity for hA2AAR (Ki,hA2A = 5.0 ± 0.5 nM, Ki,hA3/Ki,hA2A = 86) and effectively blocked cAMP production and restored IL-2 secretion in PBMCs. Favorable pharmacokinetic properties and a notable enhancement of anticancer effects in combination with an mAb immune checkpoint blockade were observed upon oral administration of 4a. These findings establish 4a as a viable immune-oncology therapeutic candidate.