Surgical treatment of fracture sequelae of the proximal humerus according to a pathology-based modification of the Boileau classification results in improved clinical outcome after shoulder arthroplasty.

BACKGROUND: Fracture sequelae of the proximal humerus were classified by Boileau into four types. Since there are pathomorphological differences and specific characteristics within the four types, we have developed a subclassification. For elderly patients, shoulder arthroplasty is mostly recommended. Based on the available literature and clinical trial results, a subclassification could be created that suggests a specific therapy for each subgroup. The aim of this study was to evaluate the endoprosthetic therapy according to the proposed subclassification and to provide an overview of the clinical and radiological results after endoprosthetic treatment of proximal humerus fracture sequelae. METHODS: Patients with fracture sequelae of the proximal humerus who underwent arthroplasty according to the suggestion of the subclassification were included. Minimum time to follow-up was twelve months. General condition and several specific shoulder scores as the Constant-Murley Score (CS) were recorded at the follow-up examination. Complication and revision rates were analyzed. RESULTS: In total, 59 patients (72.6 ± 10.0 years, 47 females, 12 males) were included. Mean follow-up time was 31.3 ± 17.0 months. Reverse shoulder arthroplasty was performed in 49 patients and anatomic shoulder arthroplasty was performed in ten patients. The CS increased by 47.3 points from preoperative (15.0) to postoperative (62.3). Good or very good clinical results were seen in 61% of the patients. Complications were observed in twelve (20%) patients and revision surgery was performed in nine (15%) patients. CONCLUSION: Due to of the variety of fracture sequelae of the proximal humerus, a modification of the Boileau classification seems necessary. This study shows that endoprosthetic treatment for fracture sequelae can significantly improve the shoulder function in elderly patients. Good clinical results can be achieved with a comparatively low revision rate following the treatment suggestions of the proposed subclassification of the Boileau classification. LEVEL OF EVIDENCE IV: Case series.

Functional results and unfavorable events after treatment of proximal humerus fractures using a new locking plate system.

BACKGROUND: Proximal humerus fractures are often treated with a fixed-angle titanium plate osteosynthesis. Recently, plates made of alternative materials such as carbon fibre-reinforced polyetheretherketone (CFR-PEEK) have been introduced. This study presents the postoperative results of patients treated with a CFR-PEEK plate. METHODS: Patients with proximal humerus fractures treated with a CFR-PEEK plate (PEEKPower™ Humeral Fracture Plate (HFP)) were included. In follow-up examination, age and gender adjusted Constant-Murley Score (ACS), Subjective Shoulder Value (SSV), Quick Disabilities of the Arm, Shoulder and Hand Score (QDASH) and pain score (Visual Analog Scale (VAS)) were analyzed. General condition at follow-up was measured by European Quality of Life 5 Dimensions 3 Level Version (EQ-5D-3L). Range of motion was recorded. In addition, radiographs at follow-up, unfavorable events and revision rate were analyzed. RESULTS: In total, 98 patients (66.0 ± 13.2 years, 74 females, 24 males) were reexamined. Mean follow-up was 27.6 ± 13.2 months. There were 15 2-part, 28 3-part and 55 4-part fractures. The functional scores showed good results: SSV 83.3 ± 15.6%, QDASH 13.1 ± 17.0 and ACS 80.4 ± 16.0. A 4-part-fracture, head split component, nonanatomic head shaft reposition and preoperative radiological signs of osteoarthritis were significant negative predictors for poorer clinical scores. Unfavourable events were observed in 27 patients (27.6%). Revision surgery was performed in 8 (8.2%) patients. Risk factors for an unfavourable event were female gender, age of 50 years and older, diabetes, affected dominant hand, 4-part fracture, head split and preoperative radiological signs of osteoarthritis. CONCLUSION: There are several advantages of the CFR-PEEK plate (PEEKPower™ Humeral Fracture Plate (HFP)) such as the polyaxial screw placement and higher stability of locking screws. In summary, the CFR-PEEK plate osteosynthesis is a good alternative with comparable clinical results and some biomechanical advantages. Proximal humerus fractures show good clinical results after treatment with a CFR-PEEK plate. The revision rate and the risk of unfavorable events are not increased compared to conventional titanium plate osteosynthesis. LEVEL OF EVIDENCE: IV.

Correct positioning of the calcar screw leads to superior results in proximal humerus fractures treated with carbon-fibre-reinforced polyetheretherketone plate osteosynthesis with polyaxial locking screws.

BACKGROUND: Plate osteosynthesis with implants made of carbon-fibre-reinforced polyetheretherketone (CFR-PEEK) has recently been introduced for the treatment of fractures of the proximal humerus (PHFs). The advantages of the CFR-PEEK plate are considered to be its radiolucency, its favourable modulus of elasticity, and the polyaxial placement of the screws with high variability of the angle. The primary aim of this study is to investigate the influence of calcar screw positioning on the complication and revision rates after CFR-PEEK plating of PHFs. The secondary aim is to assess its influence on functional outcome. MATERIAL AND METHODS: Patients were identified retrospectively. Minimum follow-up was 12 months. The cohort was divided into two groups depending on the distance of the calcar screw to the calcar (group I: < 12 mm, group II: ≥ 12 mm). The range of motion (ROM), Subjective Shoulder Value Score (SSV) and Constant-Murley Score (CS) were analysed at follow-up examination. Subjective complaints, complications (e.g. humeral head necrosis, varus dislocation) and the revision rate were evaluated. RESULTS: 51 patients (33 female, 18 male) with an average age of 68.6 years were included after a period of 26.6 months (group I: 32 patients, group II: 19 patients). Apart from the gender distribution, no significant differences were seen in the patient characteristics. The outcome scores showed significantly better clinical results in group I: SSV 83.4 vs 71.2, p = 0.007; CS 79.1 vs 67.8, p = 0.013. Complications were seen less frequently in group I (18.8 % vs 47.4 %, p = 0.030). CONCLUSION: This study shows that the positioning of the calcar screw is relevant for CFR-PEEK plate osteosynthesis in PHFs with a good reduction of the fracture. Optimal positioning of the calcar screw close to the calcar (< 12 mm) is associated with a lower rate of complications, resulting in significantly superior functional outcomes. LEVEL OF EVIDENCE: III, retrospective cohort study.

Treatment of avascular necrosis of the humeral head - Postoperative results and a proposed modification of the classification.

BACKGROUND: Avascular necrosis of the humeral head after proximal humeral fracture i.e. type 1 fracture sequelae (FS) according to the Boileau classification is a rare, often painful condition and treatment still remains a challenge. This study evaluates the treatment of FS type 1 with anatomic and reverse shoulder arthroplasty and a new subclassification is proposed. METHODS: This single-center, retrospective, comparative study, included all consecutive patients with a proximal humeral FS type 1 treated surgically in a four-year period. All patients were classified according to the proposed 3 different subtypes. Constant score (CS), Quick DASH score, subjective shoulder value (SSV) as well as revision and complication rate were analyzed. In the preoperative radiographs the acromio-humeral interval (AHI) and greater tuberosity resorption were examined. RESULTS: Of 27 with a FS type 1, 17 patients (63%) with a mean age of 64 ± 11 years were available for follow-up at 24 ± 10 months. 7 patients were treated with anatomic and 10 with reverse shoulder arthroplasty. CS improved significantly from 16 ± 7 points to 61 ± 19 points (p < 0.0001). At final follow-up the mean Quick DASH Score was 21 ± 21 and the mean SSV was 73 ± 21 points. The mean preoperative AHI was 9 ± 3 mm, however, 8 cases presented an AHI < 7 mm. 4 cases had complete greater tuberosity resorption. The complication and revision rate was 19%; implant survival was 88%. CONCLUSION: By using the adequate surgical technique good clinical short-term results with a relatively low complication rate can be achieved in FS type 1. The Boileau classification should be extended for fracture sequelae type 1 and the general recommendation for treatment with hemiarthroplasty or total shoulder arthroplasty has to be relativized. Special attention should be paid to a decreased AHI and/or resorption of the greater tuberosity as indirect signs for dysfunction of the rotator cuff. To facilitate the choice of the adequate prosthetic treatment method the suggested subclassification system should be applied.

Locked fracture dislocations of the proximal humerus: postoperative results and a proposed modification of the classification.

BACKGROUND: Locked dislocations of the glenohumeral joint are disabling and often painful conditions and the treatment is challenging. This study evaluates the functional outcome and the different prosthetic treatment options for chronic locked dislocations of the glenohumeral joint and a subclassification is proposed. METHODS: In this single-center retrospective case series, all patients with a chronic locked dislocation treated surgically during a four-year period were analyzed. Constant score (CS), Quick Disabilities of Shoulder and Hand Score (DASH), patient satisfaction (subjective shoulder value (SSV)), revision rate and glenoid notching were analyzed. RESULTS: 26 patients presented a chronic locked dislocation of the glenohumeral joint. 16 patients (62%) with a mean age of 75 [61-83] years were available for follow-up at 24 ± 18 months. CS improved significantly from 10 ± 6 points to 58 ± 21 points (p < 0.0001). At the final follow-up, the mean DASH was 27 ± 23 and the mean SSV was 58 ± 23 points. The complication rate was 19% and the revision rate was 6%; implant survival was 94%. Scapular notching occurred in 2 (13%) cases (all grade 1). CONCLUSION: With good preoperative planning and by using the adequate surgical technique, good clinical short-term results with a low revision rate can be achieved. The authors suggest extending the Boileau classification for fracture sequelae type 2 and recommend using a modified classification to facilitate the choice of treatment as the suggested classification system includes locked posterior and anterior dislocations with and without glenoid bone loss. LEVEL OF EVIDENCE: IV.

Tensioning device increases biomechanical stability of tuberosity fixation technique with cerclage sutures in reverse shoulder arthroplasty for fracture.

BACKGROUND: Complex proximal humeral fractures in elderly patients are increasingly treated with primary reverse total shoulder arthroplasty. Many surgeons use cerclage sutures for tuberosity fixation in reverse total shoulder arthroplasty for proximal humeral fractures. In this study, we hypothesized that sutures fixated with a tensioning device would achieve higher initial fixation stability of the tuberosities compared with manually knotted cerclage sutures in a biomechanical model. METHODS: A 4-part fracture was created in 7-paired human cadaver proximal humeri. The tuberosities were reduced anatomically and fixed with 3 cerclage sutures in a standardized technique. Tightening was performed either manually (n = 7) or with a cerclage tensioning device with 50 Newton meter (N m) (n = 7). The humeri were placed in a custom-made test setup enabling internal and external rotation. Cyclic loading with gradually increasing load was applied with a material testing machine starting with 20 N m and increasing by 5 N m after each 100th cycle until failure (>15° rotation of the tuberosities). Motion of the tuberosities was measured with a 3-dimensional camera system. RESULTS: Overall, the knot group reached 1040 ± 152 cycles, and the device group reached 1820 ± 719 cycles (P = .035). Major fragment motion was detected in the humeral shaft axis and in the distal divergence of the tuberosities. After 900 cycles, the knot group showed increased rotation of both lesser and greater tuberosities in all 3 axes around the humeral shaft compared with the device group. CONCLUSION: Biomechanical stability of the reattached tuberosities is significantly increased, and rotational movement of the tuberosities is decreased after tightening of the applied cerclage sutures with a tensioning device compared with manual knotting. However, transferability of these promising biomechanical results and their clinical relevance have to be verified with clinical studies.

Higher primary stability of tuberosity fixation in reverse fracture arthroplasty with 135° than with 155° humeral inclination.

BACKGROUND: Proximal humeral fractures in elderly patients are frequently treated with reverse total shoulder arthroplasty, and tuberosity healing improves clinical outcome and patient satisfaction. So far reverse prostheses with different humeral inclination (HI) angles have been used. However, it has not been investigated yet if the HI angle affects the primary stability of the tuberosity fixation in primary reverse total shoulder arthroplasty for proximal humeral fractures in a biomechanical setting. METHODS: A 4-part fracture was created in 7-paired human cadaver proximal humeri after preceding power analysis. After randomization in a pairwise fashion, reverse prostheses with either 135° (n = 7) or 155° (n = 7) were implanted. The tuberosities were reduced anatomically to the metaphysis of the prostheses and were fixed with 3 suture cerclages in a standardized technique. Tightening was performed with a cerclage tension device with 50 Newton meter (N m). Before biomechanical testing, the initial vertical and horizontal gap formation was measured. The humeri were placed in a custom-made test setup enabling internal and external rotation. Cyclic loading with a gradually increasing load magnitude was applied with a material testing machine starting with 20 N m and increasing by 5 N m after each 100th cycle until failure (>15° rotation of the tuberosities). Any motion of the tuberosities was measured with a 3-dimensional camera system. RESULTS: Overall, the 155° group reached an average of 1460 ± 270 cycles and the 135° group of 1900 ± 271 cycles (P = .048). In contrast to the 135° group, in the 155° group, a mean initial vertical (0.3 ± 0.7 mm) and horizontal (2.7 ± 3.3 mm) gap formation could be observed before cyclic loading. After 1100 cycles, the 155° group showed increased rotation of both lesser and greater tuberosities in all 3 axes around the humeral shaft compared with the 135° group. CONCLUSION: Primary stability of the reattached tuberosities is significantly increased, whereas rotational movements are decreased in prostheses with an anatomic HI of 135° compared with a 155° HI according to the original Grammont design. In addition, a 135° HI allows an exact anatomic reposition of the tuberosities, whereas this was not possible for the 155° design. However, transferability and clinical relevance of these biomechanical results have to be verified with clinical studies.

Proximal humeral fracture morphology in patients with advanced cuff tear arthropathy: an observational study in a surgically treated cohort.

BACKGROUND: In the presence of cuff tear arthropathy (CTA), joint kinematics is alternated and fracture configuration might be different. The purpose of this study was to identify fracture patterns in patients with advanced CTA to facilitate recognition and treatment. METHODS: Radiographs and computed tomography scans of all patients undergoing surgical treatment for a proximal humeral fracture (PHF) in our institution during a 5-year period were retrospectively analyzed. Fracture pattern according to the AO-OTA and Resch classification and the presence of CTA were evaluated. Glenoid configuration according to Walch, fatty atrophy of the supraspinatus muscle and the centrum-collum-diaphyseal (CCD) angle were analyzed. RESULTS: A total of 574 out of 713 patients were included. Twenty-three patients (4%) with a mean age of 82 ± 8 years showed advanced CTA with acetabularization of the acromion (≥ stage 3 according to Hamada/Fukuda). There were exclusively valgus fractures with a mean CCD angle of 158° ± 18°. Patients with CTA ≥ grade 3 had a nearly twofold greater risk (risk ratio: 1.8; confidence interval (CI): 95% 1.6-1.9; p < 0.0001) of sustaining a valgus fracture compared to patients without or with CTA < grade 3. The risk for a tuberosity fracture was nearly twofold greater in patients without or with mild CTA (risk ratio: 1.68; confidence interval (CI): 95% 1.17-2.40; p = 0.0046) compared to those with advanced CTA. CONCLUSION: In advanced CTA, a predominantly valgus fracture pattern can be observed. In addition, fractures of the greater tuberosity were significantly less frequent and were rarely displaced. Up to date, no classification system for PHF has been developed in the setting of CTA although it might indicate a different treatment, and therefore, recognition is crucial. However, when present, this changes the fracture pattern and ability to treat the fracture as the rotator cuff can no longer be utilized as a means of reducing the fragments.

High tuberosity healing rate associated with better functional outcome following primary reverse shoulder arthroplasty for proximal humeral fractures with a 135° prosthesis.

BACKGROUND: Reverse shoulder arthroplasty (RSA) is a common treatment for proximal humeral fractures. (PHF) in the elderly. This study evaluates the functional outcome and the influence of. tuberosity healing (TH) following RSA with 135° humeral inclination and a neutral glenosphere without lateralization for PHFs. METHODS: In this retrospective case series, all patients with an acute PHF treated with primary RSA with 135° humeral inclination and a standard glenosphere without lateralization during a four-year period were followed up. Constant score (CS), patient satisfaction (subjective shoulder value (SSV)), TH and glenoid notching were analyzed. RESULTS: 38 patients with a mean age of 77 ± 8 years were available for follow-up at 34 ± 5 months. The mean adjusted CS was 61 ± 9 points. TH of the greater tuberosity (GT) was 82% and resulted in significantly improved abduction (117° vs. 81°; P < 0.001), forward flexion (139° vs. 99°; p < 0.001), external rotation (28° vs. 10°; p = 0.002), CS (65 vs. 41 points; p < 0.001) and patient satisfaction (SSV 79% vs. 48%; p < 0.001). TH of the LT was 87% without affecting internal rotation or overall outcome. The complication- and revision rate was 5%; implant survival was 100%. Scapular notching occurred in 3 (8%) cases (all grade 1). CONCLUSION: RSA with 135° humeral inclination and a standard glenosphere for PHF leads to good functional outcome in combination with a high rate of TH and a low rate of scapular notching. The short-term revision rate is low and the results are predictable and continuous. TH is associated with improved ROM, patient satisfaction and functional outcome.

Short-term safety, function, and quality of life in patients treated with Univers Revers prosthesis: a multicenter 2-year follow-up case series.

BACKGROUND: The use of reverse total shoulder arthroplasty (RTSA) has dramatically increased in recent years with the advent of new prosthesis designs regularly entering the market. We define the rate of local complications during the first 2 years after RTSA with the Univers Revers prosthesis and describe the changes in radiologic outcomes, as well as function, pain, satisfaction, and quality of life. METHODS: This multicenter, prospective case series included rotator cuff tear arthropathy patients who underwent RTSA with the Univers Revers. Incidence percentages of complications and pathologic radiographic changes were documented. Mixed-model linear regression was used to examine changes in range of motion, shoulder function (Constant score, Shoulder Pain and Disability Index, Subjective Shoulder Value), and quality of life (EQ-5D-5L [European Quality of Life 5 Dimensions 5 Level] and EQ-VAS [EuroQol Visual Analog Scale]). RESULTS: Of 187 patients, 59.4% were women, and the mean age was 75.3 years (range, 56-91 years). Twenty-five percent of patients had a postoperative complication; 5 complications were severe (2.7%, 5 of 187), whereby 2 were implant related (1.1%; 95% confidence interval [CI], 0.1%-3.8%). The incidence of scapular notching was 10.6% (95% CI, 6.5%-16%). After 2 years, abduction, flexion, and abduction strength improved by 54° (95% CI, 50°-58°), 57° (95% CI, 53°-60°), and 5 kg (95% CI, 4-5 kg), respectively (P < .001), whereas external rotation at 0° (1°; 95% CI, -1° to 3°) did not improve (P = .4). The Constant score improved by 39 (95% CI, 38-41); Shoulder Pain and Disability Index, by 50 (95% CI, 47-52); and Subjective Shoulder Value, by 43 (95% CI, 41-45) (P < .001). Furthermore, the EQ-5D-5L index value improved by 0.31 (95% CI, 0.30-0.33), and the EQ-VAS score improved by 16 (95% CI, 14-18) (P < .001). CONCLUSION: Our case series showed a low complication rate with a consistent clinically relevant and statistically significant improvement across most clinical and patient-reported outcomes for the Univers Revers. Long-term safety requires further investigation.

Tuberosity healing improves functional outcome following primary reverse shoulder arthroplasty for proximal humeral fractures with a 135° prosthesis.

INTRODUCTION: Reverse shoulder arthroplasty (RSA) is a common treatment for proximal humeral fractures (PHFs) in the elderly. This study evaluates the influence of tuberosity healing (TH) on functional outcome following a 135° humeral inclination RSA for PHFs. METHODS: Retrospectively, all patients with an acute PHF treated with a 135° humeral inclination RSA at four centers during a three-year period were followed up. Constant score (CS), TH and glenoid notching were analyzed. RESULTS: Sixty-four of 100 patients (64%) with a mean age of 76 ± 7 years were available for follow-up at 22 ± 8 months. The mean-adjusted CS was 72%. TH of the greater tuberosity (GT) was 77% and resulted in significantly improved forward flexion (128° vs. 92°; p = 0.003), external rotation (33° vs. 17°; p = 0.03) and adjusted CS (78% vs. 54%, p < 0.005). GT healing rate was 86% with neutral, 70% with lateralized and 33% with an inferior eccentric glenosphere. TH of the lesser tuberosity was 79%. There was 8% complication and 3% revision rate; implant survival was 100%. CONCLUSION: RSA with 135° humeral inclination for PHFs leads to good functional outcome, reproducible results and a high rate of TH. The short-term revision rate is low. TH is associated with improved ROM and functional outcome. LEVEL OF EVIDENCE: III.

Do the radiological changes seen at mid term follow up of stemless shoulder prosthesis affect outcome?

BACKGROUND: The Eclipse® (Eclipse® is a trademark of Arthrex, Naples, Florida) stemless shoulder prosthesis offers the surgeon the advantage of bone stock preservation and at the same time avoids the drawbacks of a resurfacing arthroplasty. Previous studies have shown radiographic changes on serial follow up of the Eclipse prosthesis. This study attempts to assess the significance of these radiographic changes and effect of cuff related pathology on the mid-term outcome of the Eclipse prosthesis. METHODS: Between July 2005 and October 2008, 29 shoulders underwent shoulder arthroplasty with the Eclipse prosthesis; 23 shoulders, (seven women and 16 men) were available for the final follow up. The range of motion, Constant Score; age adjusted Constant Score, Subjective Shoulder Value and radiographs were assessed at serial follow-ups. RESULTS: Significant improvements were seen in the Constant Score (78.9 ±20.1) compared to pre-operative score (32.9 ±5.2); also forward elevation, abduction and external rotation improved to 142.9 ± 36.6 °, 135.2 ± 40.5 ° and 49.8 ± 21.9 ° at 72 months (p < 0.001). Radiolucent lines and localised osteopenia, did not statistically impact on the clinical outcome. Partial tears of the supraspinatus and subscapularis had a negative impact on the Subjective Shoulder Value (p < 0.05) Partial or complete tears of the subscapularis led to worse Constant Score on follow up (p < 0.05). CONCLUSIONS: The presence of radiolucent lines or localised osteopenia does not influence the mid term clinical outcome. Pre -operative partial supraspinatus tears or tears of the subscapularis lead to an inferior outcome.

Latissimus dorsi transfer for massive posterosuperior rotator cuff tears: what affects the postoperative outcome?

BACKGROUND: The management of irreparable posterosuperior rotator cuff tears (IPSRCTs) in young active individuals is still a challenge. The aim of this study was to evaluate the influence of sex, surgical technique, previous surgical procedures, tear genesis, and presence of a preoperative external rotation lag sign on the functional outcome after latissimus dorsi transfer (LDT) for IPSRCTs. METHODS: Retrospectively, all patients with IPSRCTs treated with LDT during a 10-year period were followed up. Preoperative evaluation included the visual analog scale (VAS) score, range of motion, and the Constant score (CS). Postoperatively, the VAS score, range of motion, CS, American Shoulder and Elbow Surgeons score, and Subjective Shoulder Value were recorded. Preoperative and postoperative radiologic evaluation was performed using the Hamada-Fukuda classification and the acromiohumeral interval. RESULTS: In total, 67 of 79 patients (85%), with a mean age of 63 years, were available for follow-up at 54 ± 28 months. The CS improved from 24 ± 6 points preoperatively to 68 ± 17 points at follow-up (P < .001). Active flexion increased from 83° ± 47° to 144° ± 35°; abduction, from 69° ± 33° to 134° ± 42°; and external rotation, from 24° ± 18° to 35° ± 21°. Postoperatively, the Subjective Shoulder Value was 69% ± 19% and the American Shoulder and Elbow Surgeons score was 76 ± 21. The VAS score decreased from 6.3 ± 1.1 to 1.8 ± 2 (P < .001). Abduction strength increased from 0.4 ± 0.4 kg to 3.6 ± 2.2 kg (P < .001). The acromiohumeral interval decreased from 7.9 ± 2.6 mm to 5.1 ± 2.2 mm, and arthropathy worsened from Hamada-Fukuda stage 1.4 to stage 2.1. The rate of conversion to a reverse prosthesis was 6%. CONCLUSION: LDT represents a reliable and reproducible treatment option with good clinical midterm results after surgical treatment. Sex, genesis, preoperative presence of an external rotation lag sign, and previous surgical procedures do not affect the overall clinical outcome.

Does Acromion Morphology Depend on the Extremity or on Gender in the Population?

OBJECTIVE: The aims were to study the acromion parameters in the population and to assess the extremity or sex variation in the acromion morphology. METHODS: The lateral acromion angle (LAA) and the acromion index (AI) were assessed in a computed tomographic scan database of 250 individuals in the age group of 20 to 49 years. For the analysis of LAA and AI, 286 and 234 shoulders were available, respectively. RESULTS: The LAA was 73.6 ± 6.6 degrees; 73.7 ± 6.9 and 72.5 ± 6.1 degrees for the right and left shoulder, respectively. The AI was 0.755 ± 0.12; 0.82 ± 0.12 and 0.69 ± 0.12 for the left and the right shoulder, respectively. The AI of the right shoulder was significantly different between the 2 sexes (P = 0.04). The difference in the AI and the LAA of the right and left shoulders was significant (P < 0.0001, P = 0.04). CONCLUSIONS: The morphology of the acromion differs between the right and the left shoulders as well as between sexes.

Development and alignment of undergraduate medical curricula in a web-based, dynamic Learning Opportunities, Objectives and Outcome Platform (LOOOP).

INTRODUCTION: This study presents a web-based method and its interface ensuring alignment of all parts of a curriculum map including competencies, objectives, teaching and assessment methods, workload and patient availability. Needs, acceptance and effectiveness are shown through a nine-year study. METHODS: After a comprehensive needs assessment, the curriculum map and a web-based interface "Learning Opportunities, Objectives and Outcome Platform" (LOOOP) were developed according to Harden's conceptual framework of 10-steps for curriculum mapping. The outcome was measured by surveys and results of interdisciplinary MCQ-assessments. The usage rates and functionalities were analysed. RESULTS: The implementation of LOOOP was significantly associated with improved perception of the curriculum structure by teachers and students, quality of defined objectives and their alignment with teaching and assessment, usage by students to prepare examinations and their scores in interdisciplinary MCQ-assessment. Additionally, LOOOP improved the curriculum coordination by faculty, and assisted departments for identifying patient availability for clinical training. CONCLUSION: LOOOP is well accepted among students and teachers, has positive effect on curriculum development, facilitates effective utilisation of educational resources and improves student's outcomes. Currently, LOOOP is used in five undergraduate medical curricula including 85,000 mapped learning opportunities (lectures, seminars), 5000 registered users (students, teachers) and 380,000 yearly page-visits.

How we avoid patient shortage with an integrated analysis of learning objectives and clinical data during development of undergraduate medical curricula.

Access to patients is a crucial factor for student-centred medical education. However, increasing numbers of students, teacher shortage, a patient spectrum consisting of rarer diseases, and quicker discharges limit this necessary access, and therefore pose a challenge for curriculum designers. The herein presented algorithm improves access to patients in four steps by using routinely available electronic patient data already during curriculum development. Step I: Learning objectives are mapped to appropriate ICD-10 (International Statistical Classification of Diseases) codes. Step II: It is determined which learning opportunities need to be considered first for patient allocation in order to maximise overall benefit. Step III: Hospital's departments with the highest expertise on respective learning objectives are assessed and selected for teaching. Step IV: Patients of the chosen department that present the best match for a given learning opportunity are assigned to participation. This integrated analysis of learning objectives and existing clinical data during curriculum development is a well-structured method to maximise access to patients. Furthermore, this algorithm identifies learning objectives of a curriculum that do not correspond well to the spectrum of patients of the respective teaching hospital and which should therefore be taught in learning formats without patient contact.

Interscalene plexus block versus general anaesthesia for shoulder surgery: a randomized controlled study.

OBJECTIVES: This randomized clinical trial evaluates interscalene brachial plexus block (ISB), general anaesthesia (GA) and the combination of both anaesthetic methods (GA + ISB) in patients undergoing shoulder arthroscopy. METHODS: From July 2011 until May 2012, 120 patients (male/female), aged 20-80 years, were allocated randomly to receive ISB (10 ml mepivacaine 1 % and 20 ml ropivacaine 0.375%), GA (propofol, sunfentanil, desflurane) or ISB + GA. The primary outcome variable was opioid consumption at the day of surgery. Anaesthesia times were analysed as secondary endpoints. RESULTS: After surgery, 27 of 40 patients with a single ISB bypassed the recovery room (p < 0.0001). Postoperative monitoring time was significantly shorter with single ISB compared with both other groups [GA: 93 (5-182) min vs. GA + ISB: 57.5 (11-220) min vs. ISB: 35 (5-106) min, p < 0.0001]. Opioid consumption was reduced using a single ISB at the day of surgery [GA: n = 25 vs. GA + ISB: n = 10 vs. ISB: n = 10, p = 0.0037]. CONCLUSION: ISB is superior to GA and GA + ISB in patients undergoing shoulder arthroscopy in terms of faster recovery and analgesics consumption.

Live-cell assays to identify regulators of ER-to-Golgi trafficking.

We applied fluorescence microscopy-based quantitative assays to living cells to identify regulators of endoplasmic reticulum (ER)-to-Golgi trafficking and/or Golgi complex maintenance. We first validated an automated procedure to identify factors which influence Golgi-to-ER relocalization of GalT-CFP (ß1,4-galactosyltransferase I-cyan fluorescent protein) after brefeldin A (BFA) addition and/or wash-out. We then tested 14 proteins that localize to the ER and/or Golgi complex when overexpressed for a role in ER-to-Golgi trafficking. Nine of them interfered with the rate of BFA-induced redistribution of GalT-CFP from the Golgi complex to the ER, six of them interfered with GalT-CFP redistribution from the ER to a juxtanuclear region (i.e. the Golgi complex) after BFA wash-out and six of them were positive effectors in both assays. Notably, our live-cell approach captures regulator function in ER-to-Golgi trafficking, which was missed in previous fixed cell assays, as well as assigns putative roles for other less characterized proteins. Moreover, we show that our assays can be extended to RNAi and chemical screens.