Biodegradable Dual-Network Cellulosic Composite Bioplastic Metafilm for Plastic Substitute.

With the escalating environmental and health concerns over petroleum-based plastics, sustainable and biodegradable cellulosic materials are a promising alternative to plastics, yet remain unsatisfied properties such as fragility, inflammability and water sensitivity for practical usage. Herein, we present a novel dual-network design strategy to address these limitations and fabricate a high-performance cellulosic composite bioplastic metafilm with the exceptional mechanical toughness (23.5 MJ m-3 ), flame retardance, and solvent resistance by in situ growth of cyclotriphosphazene-bridged organosilica network within bacterial cellulose matrix. The phosphorus, nitrogen-containing organosilica network, verified by the experimental and theoretical results, plays a triple action on significantly enhancing tensile strength, toughness, flame retardance and water resistance of composite bioplastic metafilm. Furthermore, cellulosic bioplastic composite metafilm demonstrates a higher maximum usage temperature (245 °C), lower thermal expansion coefficient (15.19 ppm °C-1 ), and better solvent resistance than traditional plastics, good biocompatibility and natural biodegradation. Moreover, the composite bioplastic metafilm have a good transparency of average 74 % and a high haze over 80 %, which can serve as an outstanding substrate substitute for commercial polyethylene terephthalate film to address the demand of flexible ITO films. This work paves a creative way to design and manufacture the competitive bioplastic composite to replace daily-used plastics.

Emerging Trends of Nanofibrous Piezoelectric and Triboelectric Applications: Mechanisms, Electroactive Materials, and Designed Architectures.

Over the past few decades, significant progress in piezo-/triboelectric nanogenerators (PTEGs) has led to the development of cutting-edge wearable technologies. Nanofibers with good designability, controllable morphologies, large specific areas, and unique physicochemical properties provide a promising platform for PTEGs for various advanced applications. However, the further development of nanofiber-based PTEGs is limited by technical difficulties, ranging from materials design to device integration. Herein, the current developments in PTEGs based on electrospun nanofibers are systematically reviewed. This review begins with the mechanisms of PTEGs and the advantages of nanofibers and nanodevices, including high breathability, waterproofness, scalability, and thermal-moisture comfort. In terms of materials and structural design, novel electroactive nanofibers and structure assemblies based on 1D micro/nanostructures, 2D bionic structures, and 3D multilayered structures are discussed. Subsequently, nanofibrous PTEGs in applications such as energy harvesters, personalized medicine, personal protective equipment, and human-machine interactions are summarized. Nanofiber-based PTEGs still face many challenges such as energy efficiency, material durability, device stability, and device integration. Finally, the research gap between research and practical applications of PTEGs is discussed, and emerging trends are proposed, providing some ideas for the development of intelligent wearables.

Wettability Gradient-Induced Diode: MXene-Engineered Membrane for Passive-Evaporative Cooling.

Thermoregulatory textiles, leveraging high-emissivity structural materials, have arisen as a promising candidate for personal cooling management; however, their advancement has been hindered by the underperformed water moisture transportation capacity, which impacts on their thermophysiological comfort. Herein, we designed a wettability-gradient-induced-diode (WGID) membrane achieving by MXene-engineered electrospun technology, which could facilitate heat dissipation and moisture-wicking transportation. As a result, the obtained WGID membrane could obtain a cooling temperature of 1.5 °C in the "dry" state, and 7.1 °C in the "wet" state, which was ascribed to its high emissivity of 96.40% in the MIR range, superior thermal conductivity of 0.3349 W m-1 K-1 (based on radiation- and conduction-controlled mechanisms), and unidirectional moisture transportation property. The proposed design offers an approach for meticulously engineering electrospun membranes with enhanced heat dissipation and moisture transportation, thereby paving the way for developing more efficient and comfortable thermoregulatory textiles in a high-humidity microenvironment.

Recent Advances in Thermoregulatory Clothing: Materials, Mechanisms, and Perspectives.

Personal thermal management (PTM) is a promising approach for maintaining the thermal comfort zone of the human body while minimizing the energy consumption of indoor buildings. Recent studies have reported the development of numerous advanced textiles that enable PTM systems to regulate body temperature and are comfortable to wear. Herein, recent advancements in thermoregulatory clothing for PTM are discussed. These advances in thermoregulatory clothing have focused on enhancing the control of heat dissipation between the skin and the localized environment. We primarily summarize research on advanced clothing that controls the heat dissipation pathways of the human body, such as radiation- and conductance-controlled clothing. Furthermore, adaptive clothing such as dual-mode textiles, which can regulate the microclimate of the human body, as well as responsive textiles that address both thermal performance (warming and/or cooling) and wearability are discussed. Finally, we include a discussion on significant challenges and perspectives in this field, including large-scale production, smart textiles, bioinspired clothing, and AI-assisted clothing. This comprehensive review aims to further the development of sustainably manufactured advanced clothing with superior thermal performance and outstanding wearability for PTM in practical applications.

Toward low-emissivity passive heating: a supramolecular-enhanced membrane with warmth retention.

Maintaining a reasonably stable body temperature is vital for a variety of human activities in an energy-conservation strategy. However, it is well-known that metal-like materials, utilized as radiative reflectors, severely restrict wearability properties, thus posing a tremendous obstacle in personal thermal management (PTM) systems. Herein, we designed a supramolecular-enhanced membrane (SupraEM) acting as a mid-infrared (MIR) reflector to solve the conundrum of warmth-wearability performance. Benefiting from the low-emissivity of decorating titanium carbide (MXene) and the formation of supramolecular interactions, the prototyped polyvinylidene difluoride&Polyurethane/MXene (PVDF&PU/MXene) SupraEM demonstrated a low-emissivity of 0.246 and reinforced mechanical performance, resulting in an evenly higher temperature retention of 8 °C in comparison to the pristine hybrid membrane counterpart, and compared with a commercial textile that is three times thicker, it also exhibited higher temperature retention of 6.2 °C. This work demonstrates the wearability of decorated MXene without sacrificing its temperature retention, overcoming a major bottleneck that has plagued MXene as a thermoregulatory material for PTM systems.