Volatile-compound fingerprinting and discrimination of positional isomers in stamp-pad ink tracing using HS-GC-IMS combined with multivariate statistical analysis.

The rising crime rate associated with document forgery has a significant impact on public safety and social stability. In document fraud cases, determining the origin of a particular stamp-pad ink is the most important objective. In this study, a comprehensive analysis of the volatile compounds in quick-drying stamp-pad inks from six commonly used brands were performed for the first time, utilizing a combination of headspace-gas chromatography-ion mobility spectrometry (HS-GC-IMS) and multivariate statistical analysis methods. Visual and comparative analysis of the differential volatile components among different stamp-pad ink samples was conducted using fingerprints and volcano plots. A total of 127 volatile compounds were accurately identified, with ketones, esters, alcohols, and aldehydes being the most abundant compounds in the stamp-pad inks. Hierarchical clustering analysis (HCA), including dendrograms and clustering heatmaps, was utilized to explore the correlations between these compounds and the samples. Additionally, the precise identification of positional isomers and functional group isomers of aliphatic compounds was achieved. To achieve accurate discrimination of various stamp-pad ink samples, a multivariate statistical analysis method was utilized to establish a classification model for them. Based on the results obtained from HS-GC-IMS, effective discrimination among different brands of stamp-pad ink samples was achieved through principal component analysis (PCA) and orthogonal partial least squares discriminant analysis (OPLS-DA). The model exhibited excellent performance, with the fit index of dependent variables (R2Y) and the predictive index of the model (Q2) values of 0.99 and 0.984, respectively. These results provided significant theoretical evidence for the application of HS-GC-IMS as an efficient technique in the analysis of volatile compounds, identification of positional isomers and functional group isomers, as well as tracing the origin of stamp-pad ink and analyzing the formation time of documents.

NIR-responsive electrospun nanofiber dressing promotes diabetic-infected wound healing with programmed combined temperature-coordinated photothermal therapy.

BACKGROUND: Diabetic wounds present significant challenges, specifically in terms of bacterial infection and delayed healing. Therefore, it is crucial to address local bacterial issues and promote accelerated wound healing. In this investigation, we utilized electrospinning to fabricate microgel/nanofiber membranes encapsulating MXene-encapsulated microgels and chitosan/gelatin polymers. RESULTS: The film dressing facilitates programmed photothermal therapy (PPT) and mild photothermal therapy (MPTT) under near-infrared (NIR), showcasing swift and extensive antibacterial and biofilm-disrupting capabilities. The PPT effect achieves prompt sterilization within 5 min at 52 °C and disperses mature biofilm within 10 min. Concurrently, by adjusting the NIR power to induce local mild heating (42 °C), the dressing stimulates fibroblast proliferation and migration, significantly enhancing vascularization. Moreover, in vivo experimentation successfully validates the film dressing, underscoring its immense potential in addressing the intricacies of diabetic wounds. CONCLUSIONS: The MXene microgel-loaded nanofiber dressing employs temperature-coordinated photothermal therapy, effectively amalgamating the advantageous features of high-temperature sterilization and low-temperature promotion of wound healing. It exhibits rapid, broad-spectrum antibacterial and biofilm-disrupting capabilities, exceptional biocompatibility, and noteworthy effects on promoting cell proliferation and vascularization. These results affirm the efficacy of our nanofiber dressing, highlighting its significant potential in addressing the challenge of diabetic wounds struggling to heal due to infection.

NIR-activated electrospun nanodetonator dressing enhances infected diabetic wound healing with combined photothermal and nitric oxide-based gas therapy.

Diabetic wounds pose a challenge to healing due to increased bacterial susceptibility and poor vascularization. Effective healing requires simultaneous bacterial and biofilm elimination and angiogenesis stimulation. In this study, we incorporated polyaniline (PANI) and S-Nitrosoglutathione (GSNO) into a polyvinyl alcohol, chitosan, and hydroxypropyltrimethyl ammonium chloride chitosan (PVA/CS/HTCC) matrix, creating a versatile wound dressing membrane through electrospinning. The dressing combines the advantages of photothermal antibacterial therapy and nitric oxide gas therapy, exhibiting enduring and effective bactericidal activity and biofilm disruption against methicillin-sensitive Staphylococcus aureus, methicillin-resistant Staphylococcus aureus, and Escherichia coli. Furthermore, the membrane's PTT effect and NO release exhibit significant synergistic activation, enabling a nanodetonator-like burst release of NO through NIR irradiation to disintegrate biofilms. Importantly, the nanofiber sustained a uniform release of nitric oxide, thereby catalyzing angiogenesis and advancing cellular migration. Ultimately, the employment of this membrane dressing culminated in the efficacious amelioration of diabetic-infected wounds in Sprague-Dawley rats, achieving wound closure within a concise duration of 14 days. Upon applying NIR irradiation to the PVA-CS-HTCC-PANI-GSNO nanofiber membrane, it swiftly eradicates bacteria and biofilm within 5 min, enhancing its inherent antibacterial and anti-biofilm properties through the powerful synergistic action of PTT and NO therapy. It also promotes angiogenesis, exhibits excellent biocompatibility, and is easy to use, highlighting its potential in treating diabetic wounds.

Stable Cd Metal-Organic Framework as a Multiresponsive Luminescent Biosensor for Rapid, Accurate, and Recyclable Detection of Hippuric Acid, Nucleoside Phosphates, and Fe3+ in Urine and Serum.

Detecting biomarkers associated with diseases has significant meaning for early prevention, diagnosis, and treatment of diseases. The development of luminescent biosensors for rapid and accurate detection in real urine and serum is urgently desired for human health monitoring. Herein, a luminescent cadmium metal-organic framework, {[Cd(L)(bpbix)]·x(solv)}n (1), was successfully prepared by using a urea-functionalized dicarboxylate ligand, 5-(3-(pyridin-4-yl)ureido)isophthalic acid (H2L), 4,4'-bis((1H-imidazol-1-yl)methyl)biphenyl (bpbix), and the Cd2+ ion. The structure of 1 presents a 2-fold interpenetrating three-dimensional pillared-layer framework. The complex 1 exhibits good stability in different-pH aqueous solutions and physiological fluids. Strikingly, the complex 1 shows quick response, high sensitivity, good anti-interference performance, and a recyclable ability for simultaneous sensing of hippuric acid (HA), nucleoside phosphates, and Fe3+ in water. More significantly, this sensor can realize the sensitive and accurate detection of HA, nucleoside phosphates, and Fe3+ in real urine and serum and meet the practical detection needs in clinical diagnosis. These results indicate that the complex 1 as a multiresponsive luminescent biosensor possesses great potential for practical detection of HA, nucleoside phosphates, and Fe3+ in biological samples.

Homochiral Eu3+@MOF Composite for the Enantioselective Detection and Separation of (R/S)-Ornidazole.

The development of homochiral materials for the enantioselective detection and separation of chiral drugs is in high demand for the pharmaceutical industry. Herein, an anionic homochiral metal-organic framework (HMOF) with in situ generated [Me2NH2]+ counterions, {[Me2NH2]2[Zn2(d-L)2(HCO2)(OH)]·5H2O}n (HMOF-1), was synthesized using a d-camphorate-derived enantiopure dicarboxylate ligand, 4,4'-[[(1R,3S)-1,2,2-trimethylcyclopentane-1,3-dicarbonyl]bis(azanediyl)]dibenzoic acid (d-H2L) via a simple solvothermal method. Interestingly, HMOF-1 could be used as a parent framework to encapsulate Eu3+ cations via an ion-exchange process, yielding an Eu3+@HMOF-1 composite with dual-luminescent centers. The obtained Eu3+@HMOF-1 has high chemical stability and good luminescence stability in water. Importantly, Eu3+@HMOF-1 exhibits enhanced enantioselectivity and sensitivity in the detection of an important chiral nitroimidazole antibiotic, (R/S)-ornidazole (ONZ) in comparison to HMOF-1 under the same aqueous conditions. The enantiomeric excess (ee) value of the ONZ enantiomers can be accurately determined by the ratio of dual emission from the ligand and Eu3+. In addition, Eu3+@HMOF-1 shows the enantioselective separation of racemic ONZ enantiomers with an ee value of 86.6%. This work provides a simple strategy for the preparation of LnIII-incorporated HMOF composite materials for the simultaneous enantioselective detection and separation of chiral drugs.

Regulation of Chirality in Metal-Organic Frameworks (MOFs) Based on Achiral Precursors through Substituent Modification.

The generation and regulation of chirality are closely related to the origin of life. Using achiral precursors to spontaneously build chiral MOFs remains a major challenge. Here, a method to synthesize chiral MOFs from achiral precursors by utilizing chiral fragments was achieved. The transformation from chiral fragments of 1 to chiral frameworks of 2 and 3 was realized by modifying the substituents, and the enantiomer resolution of 3-P41212 and 3-P43212 was achieved by d/l camphoric acid. 3 was then further studied in applications.

A Water-Stable Tb-MOF As a Rapid, Accurate, and Highly Sensitive Ratiometric Luminescent Sensor for the Discriminative Sensing of Antibiotics and D2O in H2O.

The design and development of self-calibrating ratiometric luminescent sensors for the fast, accurate, and sensitive discrimination and determination of pollutants in wastewater is highly desirable for public and environmental health. Herein, a 3D porous Tb(III)-based metal-organic framework (MOF), {[Tb(HL)(H2O)2]·x(solv)}n (1), was facilely synthesized using a urea-functionalized tetracarboxylate ligand, 5,5'-(((1,4-phenylenebis(azanediyl))bis(carbonyl))bis(azanediyl))diisophthalic acid (H4L). The activated framework showed a good water stability in both aqueous solutions at a wide pH range of 2-14 and simulated antibiotic wastewaters. Interestingly, this Tb-MOF exhibited dual luminescence owing to the partial energy transfer from the antenna H4L to Tb3+. More importantly, activated 1 (1a) that was dispersed in water showed a fast, accurate, and highly sensitive discrimination ability toward antibiotics with a good recyclability, discriminating three different classes of antibiotics from each other via the quenching or enhancement of the luminescence and tuning the emission intensity ratio between the H4L ligand and the Tb3+ center for the first time. Simultaneously, 1a is a ratiometric luminescent sensor for the rapid, accurate, and quantitative discrimination of D2O from H2O. Furthermore, this complex was successfully used for the effective determination of antibiotics and D2O in real water samples. This work indicates that 1a represents the first ever MOF material for the discriminative sensing of antibiotics and D2O in H2O and promotes the practical application of Ln-MOF-based ratiometric luminescent sensors in monitoring water quality and avoiding any major leak situation.

A Water-Stable 3D Luminescent Metal-Organic Framework Based on Heterometallic [EuIII6ZnII] Clusters Showing Highly Sensitive, Selective, and Reversible Detection of Ronidazole.

A water-stable 3D luminescent metal-organic framework (MOF), [Eu6Zn(µ3-OH)8(NDC)6(H2O)6]n (1), constructed from heterometallic [EuIII6ZnII] clusters and electron-rich π-conjugated 1,4-naphthalenedicarboxylic acid (H2NDC) ligands exhibits highly sensitive, selective, and reversible detection of ronidazole, which represents the first example of luminescent MOFs based on Ln-TM heterometallic clusters for the detection of antibiotics in aqueous solution.

A Zn-MOF-based mixed matrix membrane as an ultrastable luminescent sensor for selective and visual detection of antibiotics and pesticides in food samples.

The detection of antibiotics and pesticides are of great significance since their residues threaten the health of human beings by accumulation. However, most traditional solid chemical sensors are suffer from the limitations of low sensitivity and economic practicability because of the aggregating nature and unstable of solid sensors. Herein, a new luminescent sensor 1@PMMA (1, [(ZnL)·H2O]n (H2L = 5-(4-(pyridin-4-yl)benzamido)benzene-1,3-dioic acid); PMMA = poly(methyl methacrylate)) was successfully prepared. Notably, the polymer matrix provided the chemical protection for MOF particles. The as fabricated 1@PMMA was stable in milk, honey and egg as well as exhibited strong blue emission under ultraviolet light irradiation, which can act as luminescent probe for detecting antibiotics and pesticides. More interestingly, 1@PMMA exhibited visual, real-time and recyclable detection of antibiotics ornidazole (ODZ) and pesticides 2,6-dichloro-4-nitrobenzenamine (DCN) in real food samples. This work shows that the luminescent MOF-based mixed matrix membranes could be applied as good candidates for sensing analytes in practical application.

Injectable thermo-responsive Poloxamer hydrogel/methacrylate gelatin microgels stimulates bone regeneration through biomimetic programmed release of SDF-1a and IGF-1.

Injectable hydrogels, offering adaptable drug delivery of growth factors (GFs), hold promise for treating bone defects. To optimize osteogenic efficacy, the release of GFs should mirror the natural bone healing. We developed an injectable thermo-responsive hydrogel/microgels platform for dual GF delivery for bone regeneration. Stromal cell-derived factor-1 alpha (SDF-1a) and the Methacrylate Gelatin (GelMA) microgels which encapsulated insulin-like growth factor-1 (IGF-1) loaded liposomes (Ls) were introduced into Poloxamer 407 (P407) hydrogel matrix. This system achieved the biomimetic release profile of SDF-1a and IGF-1, which covered the early stage from day 1 to 7 and the continuous stage from day 5 to 21, respectively. In vitro study confirmed the enhanced migration, osteogenic biomarker expression, and matrix mineralization of the bone marrow mesenchymal stem cells (BMSCs) co-cultivated with the dual GFs delivering hydrogel/microgels. Transcriptome sequencing revealed that the potential mechanism was associated with mitogen-activated protein kinase (MAPK) signaling activation and its downstream ribosomal protein S6 kinase 2 (RSK2) upregulation. In a critical-sized calvarial defect model in Sprague-Dawley (SD) rats, the injectable hydrogel/microgels system promoted significant bone regeneration. Collectively, our study suggested the current hydrogel/microgels system with the biomimetic release of SDF-1a and IGF-1 efficiently promoted bone regeneration, informing the future development of GF delivery systems intended for bone regeneration therapies.

Creation and Evaluation of Human Models with Varied Walking Ability from Motion Capture for Assistive Device Development.

As the world ages, rehabilitation and assistive devices will play a key role in improving mobility. However, designing controllers for these devices presents several challenges, from varying degrees of impairment to unique adaptation strategies of users. To use computer simulation to address these challenges, simulating human motions is required. Recently, deep reinforcement learning (DRL) has been successfully applied to generate walking motions whose goal is to produce a stable human walking policy. However, from a rehabilitation perspective, it is more important to match the walking policy's ability to that of an impaired person with reduced ability. In this paper, we present the first attempt to investigate the correlation between DRL training parameters with the ability of the generated human walking policy to recover from perturbation. We show that the control policies can produce gait patterns resembling those of humans without perturbation and that varying perturbation parameters during training can create variation in the recovery ability of the human model. We also demonstrate that the control policy can produce similar behaviours when subjected to forces that users may experience while using a balance assistive device.

Electrospun polyvinyl alcohol-chitosan dressing stimulates infected diabetic wound healing with combined reactive oxygen species scavenging and antibacterial abilities.

Diabetic wounds (DW) are constantly challenged by excessive reactive oxygen species (ROS) accumulation and susceptibility to bacterial contamination. Therefore, the elimination of ROS in the immediate vicinity and the eradication of local bacteria are critical to stimulating the efficient healing of diabetic wounds. In the current study, we encapsulated mupirocin (MP) and cerium oxide nanoparticles (CeNPs) into a polyvinyl alcohol/chitosan (PVA/CS) polymer, and then a PVA/chitosan nanofiber membrane wound dressing was fabricated using electrostatic spinning, which is a simple and efficient method for fabricating membrane materials. The PVA/chitosan nanofiber dressing provided a controlled release of MP, which produced rapid and long-lasting bactericidal activity against both methicillin-sensitive S. aureus (MSSA) and methicillin-resistant S. aureus (MRSA) strains. Simultaneously, the CeNPs embedded in the membrane exhibited the desired ROS scavenging capacity to maintain the local ROS at a normal physiological level. Moreover, the biocompatibility of the multifunctional dressing was evaluated both in vitro and in vivo. Taken together, PVA-CS-CeNPs-MP integrated the desirable features of a wound dressing, including rapid and broad-spectrum antimicrobial and ROS scavenging activities, easy application, and good biocompatibility. The results validated the effectiveness of our PVA/chitosan nanofiber dressing, highlighting its promising translational potential in the treatment of diabetic wounds.

A stable Cd-MOF as a dual-responsive luminescent biosensor for the determination of urinary diphenyl phosphate and hippuric acid as biomarkers for human triphenyl phosphate and toluene poisoning.

Rapid and accurate determination of biomarkers of human poisoning in real urine is of great significance for the assessment of health status. Herein, a luminescent urea-functionalized metal-organic framework (MOF), {[Cd(L)0.5(bpbix)]·x(solv)}n (1) (H4L = 5,5'-(((naphthalene-1,5-diylbis(azanediyl))bis(carbonyl))bis(azanediyl))diisophthalic acid; bpbix = 4,4'-bis((1H-imidazol-1-yl)methyl)biphenyl), has been successfully synthesized, and exhibits good stability in aqueous solutions in the normal urinary pH range and real urine. Complex 1 can serve as a dual-responsive luminescent biosensor for the detection of diphenyl phosphate (DPP) and hippuric acid (HA) as biomarkers of flame retardant triphenyl phosphate and toluene poisoning, and shows the advantages of high sensitivity, rapid response, good anti-interference capability, and reversibility. More significantly, complex 1 is successfully applied to the sensitive and accurate detection of DPP and HA in real urine with satisfactory recoveries. This work presents a dual-responsive luminescent MOF-based biosensor for simple, rapid, accurate, and reversible determination of urinary DPP and HA, which has promising application potential for the diagnosis of diseases related to triphenyl phosphate and toluene poisoning.

A water-stable multi-responsive luminescent Zn-MOF sensor for detecting TNP, NZF and Cr2O72- in aqueous media.

The wide prevalence of organic and inorganic pollutants in water from various industries is responsible for serious environmental problems and endangers human beings. Therefore, the search for effective methods to detect these pollutants has gained great importance. In this work, a new luminescent MOF, {[Zn(L)(bpe)0.5]·DMF}n (1) [H2L = 4,4'-((naphthalene-1,4-dicarbonyl)bis(azanediyl))dibenzoic acid, bpe = 1,2-bis(4-pyridyl)ethene], was solvothermally synthesized and structurally characterized. In this MOF, Zn-SBUs (SBUs = secondary building units) were connected by acylamide-containing dicarboxylate L2- and nitrogen-containing bpe molecules to yield a 3D porous framework with isolated DMF molecules in the pores. The activated solvent-free MOF sample (denoted as 1a) with good water-stability was obtained by the solvent-exchange and vacuum heat treatment techniques. The luminescence sensing experiments showed that 1a could sensitively, selectively and reversibly detect 2,4,6-trinitrophenol (TNP), nitrofurazone (NZF) and Cr2O72- in aqueous media, and the corresponding luminescence quenching mechanism has also been discussed. In addition, MOF 1a could quantitatively detect TNP, NZF and Cr2O72- in tap water samples, indicating that MOF 1a has the potential to detect the aforesaid pollutants in various environmental water matrices.

Molecular engineering in a family of pillared-layered metal-organic frameworks for tuning gas adsorption behavior.

In this work, inspired by a water-assisted three-dimensional supramolecular structure 1, we use a mixed-ligand strategy to form a 3D pillared-layered matrix by the introduction of linear ligands to compete against the water molecules. The resulting analogue microporous MOFs of 2-H, 2-F and 2-N, decorated with different functional groups, similarly show the CO2 uptake. Thanks to the negligible N2 adsorption capacity, enhanced selective adsorption towards CO2 is achieved in compound 2-N. That is, we present here an alternative plan for the high CO2 selective adsorption performance. In addition, the structure stability and moderate affinity for CO2 of these microporous MOFs endow them with excellent reusability.

A water-stable homochiral luminescent MOF constructed from an achiral acylamide-containing dicarboxylate ligand for enantioselective sensing of penicillamine.

A water-stable homochiral luminescent metal-organic framework (HLMOF), {[Cd(l)(4,4'-bipy)]·DMA·5H2O}n (1), was obtained by a spontaneous symmetry-breaking crystallization from achiral precursors without any enantiopure auxiliary. The homochirality of 1 was confirmed by single-crystal X-ray diffraction and CD spectroscopy. Complex 1 exhibits an interesting enantioselective sensing of d/l-penicillamine in water.

A two-dimensional cadmium(II) coordination polymer based on 5-(pyridin-4-yl)isophthalic acid: poly[[tetraaquabis[µ3-5-(pyridin-4-yl)isophthalato]dicadmium(II)] pentahydrate].

The title Cd(II) compound, {[Cd2(C13H7NO4)2(H2O)4]·5H2O}n, was synthesized by the hydrothermal reaction of Cd(NO3)2·4H2O and 5-(pyridin-4-yl)isophthalic acid (H2L). The asymmetric unit contains two crystallographically independent Cd(II) cations, two deprotonated L(2-) ligands, four coordinated water molecules and five isolated water molecules. One of the Cd(II) cations adopts a six-coordinate octahedral coordination geometry involving three O atoms from one bidentate chelating and one monodentate carboxylate group of two different L(2-) ligands, one N atom of another L(2-) ligand and two coordinated water molecules. The second Cd(II) cation adopts a seven-coordinate pentagonal-bipyramidal coordination geometry involving four O atoms from two bidentate chelating carboxylate groups of two different L(2-) ligands, one N atom of another L(2-) ligand and two coordinated water molecules. Each L(2-) ligand bridges three Cd(II) cations and, likewise, each Cd(II) cation connects to three L(2-) ligands, giving rise to a two-dimensional graphite-like 6(3) layer structure. These two-dimensional layers are further linked by O-H···O hydrogen-bonding interactions to form a three-dimensional supramolecular architecture. The photoluminescence properties of the title compound were also investigated.