RESUMEN
The liquid-like feature of thermoelectric superionic conductors is a double-edged sword: the long-range migration of ions hinders the phonon transport, but their directional segregation greatly impairs the service stability. We report the synergetic enhancement in figure of merit (ZT) and stability in Cu1.99Se-based superionic conductors enabled by ion confinement effects. Guided by density functional theory and nudged elastic band simulations, we elevated the activation energy to restrict ion migrations through a cation-anion co-doping strategy. We reduced the carrier concentration without sacrificing the low thermal conductivity, obtaining a ZT of â¼3.0 at 1,050 K. Notably, the fabricated device module maintained a high conversion efficiency of up to â¼13.4% for a temperature difference of 518 K without obvious degradation after 120 cycles. Our work could be generalized to develop electrically and thermally robust functional materials with ionic migration characteristics.
RESUMEN
Nanoscale spatially controlled modulation of the properties of ferroelectrics via artificial domain pattering is crucial to their emerging optoelectronics applications. New patterning strategies to achieve high precision and efficiency and to link the resultant domain structures with device functionalities are being sought. Here, we present an epitaxial heterostructure of SrRuO3/PbTiO3/SrRuO3, wherein the domain configuration is delicately determined by the charge screening conditions in the SrRuO3 layer and the substrate strains. Chemical etching of the top SrRuO3 layer leads to a transition from in-plane a domains to out-of-plane c domains, accompanied by a giant (>105) modification in the second harmonic generation response. The modulation effect, coupled with the plasmonic resonance effect from SrRuO3, enables a highly flexible design of nonlinear optical devices, as demonstrated by a simulated split-ring resonator metasurface. This domain patterning strategy may be extended to more thin-film ferroelectric systems with domain stabilities amenable to electrostatic boundary conditions.
RESUMEN
GeSe, an analogue of SnSe, shows promise in exhibiting exceptional thermoelectric performance in the Pnma phase. The constraints on its dopability, however, pose challenges in attaining optimal carrier concentrations and improving ZT values. This study demonstrates a crystal structure evolution strategy for achieving highly doped samples and promising ZTs in GeSe via LiBiTe2 alloying. A rhombohedral phase (R3m) can be stabilized in the GeSe-LiBiTe2 system, further evolving into a cubic (Fm3Ì m) phase with a rising temperature. The band structures of GeSe-LiBiTe2 in the rhombohedral and cubic phases feature a similar multiple-valley energy-converged valence band of L and Σ bands. The observed high carrier concentration (â¼1020 cm-3) reflects the effective convergence of these bands, enabling a high density-of-states effective mass and an enhanced power factor. Moreover, a very low lattice thermal conductivity of 0.6-0.5 W m-1 K-1 from 300 to 723 K is achieved in 0.9GeSe-0.1LiBiTe2, approaching the amorphous limit value. This remarkably low lattice thermal conductivity is related to phonon scattering from point defects, planar vacancies, and ferroelectric instability-induced low-energy Einstein oscillators. Finally, a maximum ZT value of 1.1 to 1.3 at 723 K is obtained, with a high average ZT value of over 0.8 (400-723 K) in 0.9GeSe-0.1LiBiTe2 samples. This study establishes a viable route for tailoring crystal structures to significantly improve the performance of GeSe-related compounds.
RESUMEN
GeMnTe2 adopts a cubic rock salt structure and is a promising mid-temperature thermoelectric material. The pair distribution function analysis of neutron total scattering data, however, indicates that GeMnTe2 is locally distorted from the ideal rock salt structure with Ge2+ cations being discordant and displaced â¼0.3 Å off the octahedron center. By alloying GeMnTe2 with SbTe, the carrier concentration can be tuned in GeMnTe2-x%SbTe (x = 15.1), leading to converged multiple broad valence bands and a high Seebeck coefficient of >200 µV K-1 from 300 to 823 K. The system exhibits a large density-of-state effective mass of >10 me and a high weighted mobility of 80 cm2 V-1 s-1, leading to a power factor of 15 µWcm-1 K-2 at 823 K. The composition GeMnTe2-15.1%SbTe exhibits very low lattice thermal conductivity of â¼0.5 Wm-1 K-1 at 823 K, attributed to the combination of off-centering cations in the rock salt structure, Ge/Mn positional disorder, dislocations, and abundant Ge-rich and Mn-rich nanoparticles. A ZT value of â¼1.5 can be achieved for GeMnTe2-15.1%SbTe with a ZTave of 0.96 in the temperature range of 400-823 K.
RESUMEN
Thermoelectric sulfide materials are of particular interest due to the earth-abundant and cost-effective nature of sulfur. Here, we report a new n-type degenerate semiconductor sulfide, AgBiPbS3, which adopts a Fm3Ì m structure with a narrow band gap of â¼0.32 eV. Despite the homogeneous distribution of elements at the scale of micrometer, Ag2S nanoprecipitates with dimensions of several nanometers were detected throughout the matrix. AgBiPbS3 exhibits a low room-temperature lattice thermal conductivity of 0.88 W m-1 K-1, owing to the intrinsic low lattice thermal conductivity of Ag2S and the effective scattering of phonons at nanoprecipitate boundaries. Moreover, compared to AgBiS2, AgBiPbS3 demonstrates a significantly improved weighted mobility of >16 cm2 V-1 s-1 at 300 K, leading to an enhanced PF of 1.6 µW cm-1 K-2 at 300 K. The superior electrical transport in AgBiPbS3 can be attributed to the high valley degeneracy of the L point (the conduction band minimum), which is contributed by the Pb s and Pb p orbitals. Further, Ga doping is found to be effective in modulating the Fermi levels of AgBiPbS3, leading to further enhancement of PF with a PFave of 2.7 µW cm-1 K-2 in the temperature range of 300-823 K. Consequently, a relatively high ZTave of 0.22 and a peak ZT of â¼0.4 at 823 K have been achieved in 3% Ga-doped AgBiPbS3, highlighting the potential of AgBiPbS3 as an n-type thermoelectric sulfide.
RESUMEN
Recent advances in perovskite ferroelectrics have fostered a host of exciting sensors and actuators. Defect engineering provides critical control of the performance of ferroelectric materials, especially lead-free ones. However, it remains a challenge to quantitatively study the concentration of defects due to the complexity of measurement techniques. Here, a feasible approach to analyzing the A-site defect and electron in alkali metal niobate is demonstrated. The theoretical relationships among defect concentration, conductivity, and oxygen partial pressure can be established based on the defect chemistry equilibria. The type and concentration of defects are reflected through the conductivity variation with oxygen partial pressure. As a result, the variation of defect concentration gives rise to defect-driven interfacial polarization, which further leads to distinct properties of the ceramics. e.g., abnormal dielectric behavior. Furthermore, this study also suggests a strategy to manipulate defects and charges in perovskite oxides for performance optimization.
RESUMEN
Mechanical switching of ferroelectric polarization, typically realized via a scanning probe, holds promise in (multi)ferroic device applications. Whereas strain gradient-associated flexoelectricity has been regarded to be accountable for mechanical switching in ultrathin (<10 nm) films, such mechanism can hardly be extended to thicker materials due to intrinsic short operating lengths of flexoelectricity. Here, we demonstrate robust mechanical switching in â¼100 nm thick Pb(Zr0.2Ti0.8)O3 epitaxial films with a characteristic microstructure consisting of nanosized ferroelastic domains. Through a combination of multiscale structural characterizations, piezoresponse force microscopy, and phase-field simulations, we reveal that the ferroelastic nanodomains effectively mediate the 180° switching nucleation in a dynamical manner during tip scanning. Coupled with microstructure engineering, this newly revealed mechanism could boost the utility of mechanical switching through extended material systems. Our results also provide insight into competing polarization switching pathways in complex ferroelectric materials, essential for understanding their electromechanical response.
RESUMEN
An amendment to this paper has been published and can be accessed via the original article.
RESUMEN
BACKGROUND: Diabetic wounds are a disturbing and rapidly growing clinical problem. A novel peptide, parathyroid hormone related peptide (PTHrP-2), is assumed as multifunctional factor in angiogenesis, fibrogenesis and re-epithelization. This study aims to test PTHrP-2 efficiency and mechanism in wound healing. METHODS: Through repair phenomenon in vivo some problems were detected, and further research on their mechanisms was made. In vivo therapeutic effects of PTHrP-2 were determined by HE, Masson, microfil and immunohistochemical staining. In vitro direct effects of PTHrP-2 were determined by proliferation, migration, Vascular Endothelial Grown Factor and collagen I secretion of cells and Akt/ Erk1/2 pathway change. In vitro indirect effects of PTHrP-2 was study via exosomes. Exosomes from PTHrP-2 untreated and treated HUVECs and HFF-1 cells were insolated and identified. Exosomes were co-cultured with original cells, HUVECs or HFF-1 cells, and epithelial cells. Proliferation and migration and pathway change were observed. PTHrP-2-HUVEC-Exos were added into in vivo wound to testify its hub role in PTHrP-2 indirect effects in wound healing. RESULTS: In vivo, PTHrP-2 exerted multifunctional pro-angiogenesis, pro-firbogenesis and re-epithelization effects. In vitro, PTHrP-2 promoted proliferation and migration of endothelial and fibroblast cells, but had no effect on epithelial cells. Therefore, we tested PTHrP-2 indirect effects via exosomes. PTHrP-2 intensified intercellular communication between endothelial cells and fibroblasts and initiated endothelial-epithelial intercellular communication. PTHrP-2-HUVEC-Exos played a hub role in PTHrP-2 indirect effects in wound healing. CONCLUSION: These findings of this study indicated that PTHrP-2, a multifunctional factor, could promote wound healing via synergistic multicellular stimulating and exosomal activities.
Asunto(s)
Diabetes Mellitus Experimental , Proteína Relacionada con la Hormona Paratiroidea , Piel/efectos de los fármacos , Cicatrización de Heridas/efectos de los fármacos , Animales , Proliferación Celular/efectos de los fármacos , Diabetes Mellitus Experimental/complicaciones , Diabetes Mellitus Experimental/tratamiento farmacológico , Exosomas/metabolismo , Células HaCaT , Células Endoteliales de la Vena Umbilical Humana , Humanos , Masculino , Neovascularización Fisiológica/efectos de los fármacos , Proteína Relacionada con la Hormona Paratiroidea/administración & dosificación , Proteína Relacionada con la Hormona Paratiroidea/farmacología , Ratas , Ratas Sprague-Dawley , Piel/patologíaRESUMEN
Chroogomphus rutilus is a rare fungal species that grows under pine trees and is now widely used as a functional food and pharmaceutical product. However, the chemical constituents and biological activities of Chroogomphus rutilus have been relatively limited. The present study aimed at determining the total polyphenols and flavonoids contents, biological activities and main phenolic compounds of Chroogomphus rutilus from different geographical origins at the stipe and pileus. The results suggested that Chroogomphus rutilus polyphenol extracts revealed a higher antioxidant, anti-inflammatory, and cytotoxic activities, and there were significant differences between samples from different locations and regions. Correlation analysis showed that the contents of total polyphenols and flavonoids were significantly correlated with antioxidant and anti-inflammatory activities. However, only the content of total flavonoids was significantly correlated with cytotoxicity, which means that the cytotoxicity of Chroogomphus rutilus polyphenol extracts may be regulated by flavonoids or other compounds. HPLC-DAD analysis revealed that the main phenolic compound was protocatechuic acid, followed by baicalin, p-hydroxyphenylacetic acid and p-hydroxybenzoic acid, but comparing with the pileus extracts, the stipe extracts can be considered as a higher concentration of phenolic compounds. Therefore, antioxidant, anti-inflammatory and cytotoxic activities of Chroogomphus rutilus polyphenol extracts could be due to the identified compounds. This study investigated a deep knowledge about the constituents and activities of Chroogomphus rutilus and provided the reference for its application in food and pharmaceutical.
Asunto(s)
Antiinflamatorios/farmacología , Antineoplásicos/farmacología , Antioxidantes/farmacología , Basidiomycota/química , Polifenoles/aislamiento & purificación , Polifenoles/farmacología , Animales , Antiinflamatorios/química , Antiinflamatorios/aislamiento & purificación , Antineoplásicos/química , Antineoplásicos/aislamiento & purificación , Antioxidantes/química , Antioxidantes/aislamiento & purificación , Proliferación Celular/efectos de los fármacos , Supervivencia Celular/efectos de los fármacos , Ensayos de Selección de Medicamentos Antitumorales , Humanos , Lipopolisacáridos/antagonistas & inhibidores , Lipopolisacáridos/farmacología , Macrófagos/efectos de los fármacos , Ratones , Polifenoles/química , Células RAW 264.7RESUMEN
Thermoelectric power generation technology has emerged as a clean "heat engine" that can convert heat to electricity. Recently, the discovery of an ultrahigh thermoelectric figure of merit in SnSe crystals has drawn a great deal of attention. In view of their facile processing and scale-up applications, polycrystalline SnSe materials with ZT values comparable to those of the SnSe crystals are greatly desired. Here we achieve a record high ZT value â¼2.1 at 873 K in polycrystalline Sn1-xSe with Sn vacancies. We demonstrate that the carrier concentration increases by artificially introducing Sn vacancies, contributing significantly to the enhancements of electrical conductivity and thermoelectric power factor. The detailed analysis of the data in the light of first-principles calculations results indicates that the increased carrier concentration can be attributed to the Sn-vacancy-induced Fermi level downshift and the interplay between the vacancy states and valence bands. Furthermore, vacancies break translation symmetry and thus enhance phonon scattering, leading to extralow thermal conductivity. Such high ZT value â¼2.1 is achieved by synergistically optimizing both electrical- and thermal-transport properties of polycrystalline SnSe. The vast increase in ZT for polycrystalline SnSe may accelerate practical applications of this material in highly effective solid-state thermoelectric devices.
RESUMEN
High-quality (1 - x)(Bi0.5Na0.5)TiO3-xSrTiO3 lead-free piezoelectric thin films (x = 0, 0.1, and 0.25) on Pt(111)/Ti/SiO2/Si(100) substrates were prepared by a sol-gel method. The microstructures of the thin films as a function of SrTiO3 doping level and temperature were investigated by X-ray diffraction and Raman spectroscopy. Their temperature- and frequency-dependent piezoelectric properties were studied on the nanoscale using switching spectroscopy piezoresponse force microscopy (SS-PFM). A rhombohedral ferroelectric to pseudocubic relaxor phase transition was observed when either ST content or temperature increased. The significant frequency dependence of both ferroelectric and piezoelectric properties was also disclosed by analyzing polarization hysteresis loops on the macroscopic scale and local switching dynamics at various frequencies. It was determined that the short-range order clusters came out through the long-range ferroelectric order, thus the nanoscale approaches are consistent with macroscopic data at elevated temperatures and various frequency ranges.
RESUMEN
With growing concern over world environmental problems and increasing legislative restriction on using lead and lead-containing materials, a feasible replacement for lead-based piezoceramics is desperately needed. Herein, we report a large piezoelectric strain (d33*) of 470 pm/V and a high Curie temperature (Tc) of 243 °C in (Na0.5K0.5)NbO3-(Bi0.5Li0.5)TiO3-BaZrO3 lead-free ceramics by doping MnO2. Moreover, excellent temperature stability is also observed from room temperature to 170 °C (430 pm/V at 100 °C and 370 pm/V at 170 °C). Thermally stimulated depolarization currents (TSDC) analysis reveals the reduced defects and improved ferroelectricity in MnO2-doped piezoceramics from a macroscopic view. Local poling experiments and local switching spectroscopy piezoresponse force microscopy (SS-PFM) demonstrates the enhanced ferroelectricity and domain mobility from a microscopic view. Distinct grain growth and improvement in phase angle may also account for the enhancement of piezoelectric properties.
RESUMEN
Extensive studies on (Bi0.5Na0.5)TiO3-BaTiO3 piezoceramics have aroused growing interest in developing high-performance piezoelectric films based on this promising lead-free piezoelectric system. High quality (1 - x%) (Bi0.5Na0.5)TiO3-x% BaTiO3 (x = 0-15) thin films were synthesized on Pt(111)/Ti/SiO2/Si(100) substrates via a sol-gel method. The phase transitions as functions of composition and temperature were investigated by X-ray diffraction (XRD) and temperature-dependent Raman spectra analysis. A morphotropic phase boundary (MPB) located at 5 ≤ x ≤ 10 was found in the films, being identical to that in bulk materials. Additionally, complicated structural changes with temperature in a wide composition range were observed, which correspond to the evolution from a low-symmetry ferroelectric phase or a relaxor phase to high-symmetry relaxor phases. The ferroelectricity and piezoelectricity were also systematically studied with an emphasis on the influence of composition and phase structure. A phase diagram focusing on the above two kinds of phase transitions has been proposed in this work.
RESUMEN
Recent findings about ultrahigh thermoelectric performance in SnSe single crystals have stimulated related research on this simple binary compound, which is focused mostly on its polycrystalline counterparts, and particularly on electrical property enhancement by effective doping. This work systematically investigated the thermoelectric properties of polycrystalline SnSe doped with three alkali metals (Li, Na, and K). It is found that Na has the best doping efficiency, leading to an increase in hole concentration from 3.2 × 10(17) to 4.4 × 10(19) cm(-3) at room temperature, accompanied by a drop in Seebeck coefficient from 480 to 142 µV/K. An equivalent single parabolic band model was found adequate to capture the variation tendency of Seebeck coefficient with doping levels within a wide range. A mixed scattering of carriers by acoustic phonons and grain boundaries is suitable for numerically understanding the temperature-dependence of carrier mobility. A maximum ZT of â¼0.8 was achieved in 1% Na- or K-doped SnSe at 800 K. Possible strategies to improve the mobility and ZT of polycrystals were also proposed.
RESUMEN
Both lead selenide (PbSe) and tin selenide (SnSe) are promising thermoelectric compounds consisting of earth-abundant elements, between which solid solutions can be formed over a wide composition range. This study investigated the electrical and thermal transport properties of n-type Pb1-xSnxSe (x = 0, 0.01, 0.05, 0.1 and 0.15) solid solutions with emphasis on the effect of Sn substitution. Small amounts of Sn substitution (x ≤ 0.1) increased electrical conductivity but showed less influence on the Seebeck coefficient, leading to improved power factors, which were revealed to be associated with the generation of native Se vacancies. The electrical conductivity tended to decrease when x > 0.1 due to the alloying effect, consequently the thermoelectric figure of merit was not further increased, even though the thermal conductivity can be reduced by increasing Sn content. A maximum dimensionless figure of merit ZT of up to 1.0 was obtained at moderate temperature (773 K) for the composition of Pb0.9Sn0.1Se.
RESUMEN
SnSe, a "simple" and "old" binary compound composed of earth-abundant elements, has been reported to exhibit a high thermoelectric performance in single crystals, which stimulated recent interest in its polycrystalline counterparts. This work investigated the electrical and thermal transport properties of pristine and Na-doped SnSe1-xTex polycrystals prepared by mechanical alloying and spark plasma sintering. It is revealed that SnSe1-xTex solid solutions are formed when x ranges from 0 to 0.2. An energy barrier scattering mechanism is suitable for understanding the electrical conducting behaviour observed in the present SnSe polycrystalline materials, which may be associated with abundant defects at grain boundaries. The thermal conductivity was greatly reduced upon Te substitution due to alloy scattering of phonons as well explained by the Debye model. Due to the increased carrier concentration by Na-doping, thermoelectric figure of merit (ZT) was enhanced in the whole temperature range with a maximum value of 0.72 obtained at a relatively low temperature (773 K) for Sn0.99Na0.01Se0.84Te0.16.
RESUMEN
Sm-doped BiFeO3 thin films were fabricated on platinized silicon substrates via a sol-gel method. Sm contents and thicknesses were varied in a wide range to investigate their effects on the phase structure and piezoelectricity. X-ray diffraction and Raman spectroscopy experiments revealed a rhombohedral to orthorhombic phase transition and the co-existence of both phases in a certain compositional vicinity. It is found that the proportion of a rhombohedral phase increased with film thickness at the compositions corresponding to the phase transition boundary, indicating the influence of the film thickness on the phase structure. The phase transition phenomenon and film thickness effect on the boundary were also studied by piezoresponse force microscopy. Based on the structure analysis and piezoelectric characterization results, a phase diagram of thickness versus composition was proposed, in which the morphotropic phase boundary was located at 9% to 11% in thinner Sm-doped films and shifted towards the Sm-rich side with increasing thickness.
RESUMEN
Recently, the earth-abundant tin sulfide (SnS) has emerged as a promising thermoelectric material due to its phonon and electron structure similar to that of tin selenide (SnSe). However, compared with SnSe, limited progress has been achieved in the thermoelectric property enhancement of SnS. Textured SnS polycrystals with an enhanced thermoelectric performance have been developed in this work. The high carrier mobility benefited from the enhanced texture through the repressing strategy of spark plasma sintering, improving the electrical conductivity. In addition, Sn atom deficiencies in the texture sample led to an increased hole concentration, further boosting the electrical conductivity and power factor. The power factor exceeded 4.10 µW/cm·K2 at 423 K and 5.50 µW/cm·K2 at 850 K. The phonon scattering was strengthened by adjusting the multiscale microstructures including dislocations, defect clusters, etc., leading to an ultralow lattice thermal conductivity of 0.23 W/m·K at 850 K. A figure of merit zT > 1.3 at 850 K and an average zTave of 0.58 in the temperature range 373-850 K were achieved in the SnS polycrystal.
RESUMEN
GeTe is a promising p-type material with increasingly enhanced thermoelectric properties reported in recent years, demonstrating its superiority for mid-temperature applications. In this work, the thermoelectric performance of GeTe is improved by a facile composite approach. We find that incorporating a small amount of boron particles into the Bi-doped GeTe leads to significant enhancement in power factor and simultaneous reduction in thermal conductivity, through which the synergistic modulation of electrical and thermal transport properties is realized. The thermal mismatch between the boron particles and the matrix induces high-density dislocations that effectively scatter the mid-frequency phonons, accounting for a minimum lattice thermal conductivity of 0.43 Wm-1K-1 at 613 K. Furthermore, the presence of boron/GeTe interfaces modifies the interfacial potential barriers, resulting in increased Seebeck coefficient and hence enhanced power factor (25.4 µWcm-1K-2 at 300 K). Consequently, we obtain a maximum figure of merit Zmax of 4.0 × 10-3 K-1 at 613 K in the GeTe-based composites, which is the record-high value in GeTe-based thermoelectric materials and also superior to most of thermoelectric systems for mid-temperature applications. This work provides an effective way to further enhance the performance of GeTe-based thermoelectrics.