RESUMEN
Water, covering over two-thirds of the Earth's surface, holds immense potential for generating clean water, sustainable energy, and metal resources, which are the cornerstones of modern society and future development. It is highly desired to produce these crucial elements through eco-friendly processes with minimal carbon footprints. Interfacial solar evaporation, which utilizes solar energy at the air-liquid interface to facilitate water vaporization and solute separation, offers a promising solution. In this review, we systematically report the recent progress of the cogeneration of clean water and energy/resources including electricity, hydrogen, and metal resources via interfacial solar evaporation. We first gain insight into the energy and mass transport for a typical interfacial solar evaporation system and reveal the residual energy and resources for achieving the cogeneration goal. Then, we summarize the recent advances in materials/device designs for efficient cogeneration. Finally, we discuss the existing challenges and potential opportunities for the further development of this field.
RESUMEN
Chiral quantum dots (QDs) are promising materials applied in many areas, such as chiral molecular recognition and spin selective filter for charge transport, and can be prepared by facile ligand exchange approaches. However, ligand exchange leads to an increase in surface defects and reduces the efficiencies of radiative recombination and charge transport, which restricts further applications. Here, we investigate the light-induced photoluminescence (PL) enhancement in chiral L- and D-cysteine CdSe QD thin films, providing a strategy to increase the PL. The PL intensity of chiral CdSe QD films can be significantly enhanced over 100 times by continuous UV laser irradiation, indicating a strong passivation of surface defects upon laser irradiation. From the comparative measurements of the PL intensity evolutions in vacuum, dry oxygen, air, and humid nitrogen atmospheres, we conclude that the mechanism of PL enhancement is photo-induced surface passivation with the assistance of water molecules.
RESUMEN
Body weight is related to both diabetes and cognitive impairment; however, the associations between body mass index (BMI) and cognitive impairment have been reported less frequently among diabetes patients. A total of 1355 patients with type 2 diabetes aged ≥ 60 years were included in this study. The Montreal Cognitive Assessment (MoCA) was administered to assess participants' cognitive status. We collected self-reported body weight, weight loss and appetite loss data using questionnaires. Associations between body weight status (in childhood, midlife age, and late life), weight loss, appetite changes and cognitive impairment were explored using logistic regression. Among the participants, 41.7% exhibited cognitive impairment. Overweight in childhood and late life was associated with cognitive impairment among diabetes patients (OR 2.63, 95% CI 1.52-4.55; OR 1.32, 95% CI 1.03-1.69). Diabetes patients with cognitive impairment were more likely to report a body weight decline and appetite reduction in the past three months (OR 4.18, 95% CI 2.61-6.71; OR 4.41, 95% CI 2.67-7.29). Higher BMI, weight loss, and appetite reduction were positively correlated with cognitive impairment. Given the risk of cognitive impairment, we suggest that body weight and BMI decline should be monitored in patients with diabetes.
Asunto(s)
Índice de Masa Corporal , Disfunción Cognitiva , Diabetes Mellitus Tipo 2 , Pérdida de Peso , Humanos , Masculino , Femenino , Disfunción Cognitiva/fisiopatología , Disfunción Cognitiva/etiología , Anciano , Diabetes Mellitus Tipo 2/complicaciones , Diabetes Mellitus Tipo 2/fisiopatología , Persona de Mediana Edad , Peso Corporal , Anciano de 80 o más Años , Regulación del Apetito , Apetito/fisiologíaRESUMEN
The advanced science and technology of polymer matrix nanomaterials are rapidly developing fields that focus on the synthesis, characterization, and application of nanomaterials in polymer matrices [...].
RESUMEN
The pursuit of environmentally friendly and highly effective antifouling materials for marine applications is of paramount importance. In this study, we successfully synthesized novel rare earth-based complexes by coordinating cerium (Ce III), samarium (Sm III), and europium (Eu III) with pyrithione (1-hydroxy-2-pyridinethione; PT). Extensive characterizations were performed, including single-crystal X-ray analysis, which revealed the intriguing binuclear structure of these complexes. This structural motif comprises two rare-earth ions intricately double-bridged by two oxygen atoms from the PT ligand, resulting in a distinctive and intriguing geometry. Furthermore, the central rare earth ion is surrounded by three sulfur atoms and two additional oxygen atoms, forming a unique distorted bicapped trigonal prismatic configuration. Compared with conventional antifouling biocides such as sodium pyrithione (NaPT), copper pyrithione (CuPT), and zinc pyrithione (ZnPT), these newly synthesized rare-earth complexes exhibited a remarkable boost in their in vitro antibacterial efficacy against both Gram-positive and Gram-negative bacteria. Additionally, these complexes demonstrated significant potential as antialgal agents, displaying impressive activity against marine planktonic organisms. These findings underscore the promising application prospects of these rare-earth complexes in the field of marine antifouling.
Asunto(s)
Antibacterianos , Bacterias Gramnegativas , Piridinas , Tionas , Antibacterianos/farmacología , Bacterias Grampositivas , OxígenoRESUMEN
Charge transfer efficiencies in all-inorganic lead halide perovskite nanocrystals (NCs) are crucial for applications in photovoltaics and photocatalysis. Herein, CsPbBr3 NCs with different sizes are synthesized by varying the ligand contents of didodecyl dimethylammonium bromide at room temperature. Adding benzoquinone (BQ) molecules leads to a decrease in the PL intensities and PL decay times in NCs. The electron transfer (ET) efficiency (ηET) increases with NC size in complexes of CsPbBr3 NCs and BQ molecules (NC-BQ complexes), when the same concentration of BQ is maintained, as investigated by transient photobleaching and photoluminescence spectroscopies. Controlling the same number of attached BQ acceptor molecules per NC induces the same ηET in NC-BQ complexes even though with different NC sizes. Our findings provide new insights into ultrafast charge transfer behaviors in perovskite NCs, which is important for designing efficient light energy conversion devices.
RESUMEN
The poor UV shielding property of PLA limit it further applications on food packaging. The rare-earth complex Eu(DBM)3phen converts absorbed ultraviolet (UV) light to red light, which inspires the development of new UV shielding materials. However, this complex has low photostability and decomposes easily under UV irradiation. Thus, we prepared a long-lasting rare-earth complex transluminant Eu(DBM)2(BP-2)phen by introducing BP-2 into Eu(DBM)3phen, and blended it with PLA to obtain PLA/Eu(DBM)2(BP-2)phen composite films. The test results showed that the complex could reduce the UV transmittance of PLA films by emitting luminescence and heat. The UV transmittance of the composite film with 0.5 % mass fraction decreased from 87.4 % to 7.7 %, compared to pure PLA films, and remained at 11.6 % after 12 days of UV aging. The film had long-lasting UV shielding performance, good transparency and mechanical properties. Finally, In the storage experiments of flaxseed oil, the P/E25 film effectively retarded the oxidation process of the oil.
Asunto(s)
Europio , Embalaje de Alimentos , Poliésteres , Rayos Ultravioleta , Poliésteres/química , Europio/química , Embalaje de Alimentos/métodos , Aceite de Linaza/químicaRESUMEN
Background: The most common route of opioid delivery is nurse-administered pills. However, there are numerous challenges such as nursing burden, opioid diversion, medication delay, and patient dissatisfaction. In this study, we conducted two surveys, first to assess patients' and nurses' opinions on the current administration of opioids in pill form, followed by their attitudes towards an innovative concept of oral medication delivery based on a medical device currently undergoing research and development within the University, patient-controlled dispenser and deactivator (PCDD) that allows patients to self-administer liquid oral opioids on demand based on physician prescription. Methods: Questionnaires were developed, verified and deployed to assess nurse and post-surgical patient opinions on the current administration of opioids in pill form, as well as the proposed new concept of patient -controlled administration of oral liquid medication via an illustration of PCDD, from September 2022 through July 2023 at a major academic tertiary care center. Quantitative and qualitative data were collected from postoperative patients and nurses from surgical specialties including General Surgery, Surgical Oncology, Trauma Surgery, Orthopedics, and Neurosurgery. Results: Forty-three patients and 53 nurses were interviewed. Seventy percent of patients frequently called nurses for pain medication post-surgery 1-4 times daily, and 32% of patients were told each day by nurses that they could not receive medication because they were not due yet. Medication delay caused 24% of patients to worry about nursing availability for medication delivery. Likewise, nurses reported that half of patients receive delayed medication (22 minutes median delay time) and half of nursing time was spent administering pain medication. Nurses expressed moderate satisfaction with their current delivery of medication (median satisfaction score 6.5 out of 10). When being introduced to the concept of PCDD via a product illustration, 15% of patients said that they prefer liquid medication and 51% said they prefer PCDD or were interested in trying it. Conclusion: Nurse-administered pills are a common but suboptimal method for postoperative pain management. Based on patient and nurse feedback, patient controlled self-administered liquid oral opioid delivery is conceptually innovative, practically viable and potentially a preferred alternative for timely and less nurse-exhaustive pain management.
RESUMEN
Radiative cooling is a zero-energy technology that enables subambient cooling by emitting heat into outer space (~3 K) through the atmospheric transparent windows. However, existing designs typically focus only on the main atmospheric transparent window (8-13 µm) and ignore another window (16-25 µm), under-exploiting their cooling potential. Here, we show a dual-selective radiative cooling design based on a scalable thermal emitter, which exhibits selective emission in both atmospheric transparent windows and reflection in the remaining mid-infrared and solar wavebands. As a result, the dual-selective thermal emitter exhibits an ultrahigh subambient cooling capacity (~9 °C) under strong sunlight, surpassing existing typical thermal emitters (≥3 °C cooler) and commercial counterparts (as building materials). Furthermore, the dual-selective sample also exhibits high weather resistance and color compatibility, indicating a high practicality. This work provides a scalable and practical radiative cooling design for sustainable thermal management.