Biochemical and structural characterization of a novel L-isoleucine-4-dioxygenase (RaIDO) from Rahnella aquatilis.

The L-isoleucine-4-dioxygenase converts L-isoleucine (Ile) into(2S,3R,4S)-4-(OH)-isoleucine (4-HIL), a naturally occurring hydroxyl amino acid, which is a promising compound for drug and functional food development. Here, a novel L-isoleucine-4-dioxygenase (RaIDO) from Rahnella aquatilis was cloned, expressed and characterized, as one of only a few reported L-isoleucine-4-dioxygenases. RaIDO showed high catalytic efficiency with Ile as the substrate, as well as good stability. HPLC-MS and NMR confirmed that RaIDO converts Ile into (2S,3R,4S)-4-(OH)-isoleucine. Further, structural analysis of RaIDO revealed key active site residues, including H159, D161 and H212. The RaIDO enzyme showed an optimal reaction temperature range of 30°C-45 °C, with the highest catalytic activity observed at 40 °C. Additionally, the enzyme exhibited an optimal pH of 8.0. Thus, the novel L-isoleucine-4-dioxygenase (RaIDO) has high catalytic efficiency and good stability, making it a strong candidate for industrial applications.

The impacts of pullulan soaking on radish seed germination and seedling growth under salt stress.

Pullulan can not only provide a source of organic carbon but also has excellent properties. However, current research is mostly limited to the physical properties of the high-molecular-weight components of pullulan, and little is known about the application of its low-molecular-weight components. This study was designed to explore the impact of presoaking of radish seeds in a pullulan solution on seed germination and subsequent seedling growth under salt stress conditions. Pullulan soaking was found to enhance the germination rates of radish seeds subjected to salt stress, while also enhancing the aboveground growth of radish seedlings. Pullulan soaking resulted in increases in chlorophyll, soluble protein, and soluble sugar concentrations in the leaves of these seedlings, together with greater peroxidase activity and root activity as well as decreases in Na+ and malondialdehyde concentrations. This provides an important reference for the application of pullulan in plant protection.

Improving the regeneration rate of deep lethal mutant protoplasts by fusion to promote efficient L-lysine fermentation.

BACKGROUND: L-lysine is widely used for feed and special diet products. The transformation of fermentation strains plays a decisive role in the development of these industries. Based on the mutation breeding theory and metabolic engineering methods, this study aimed to improve the regeneration rate of high-lethality protoplasts by combining multiple mutagenesis and homologous cell fusion techniques to efficiently concentrate multiple dominant mutations and optimize the L-lysine production strain Escherichia coli QDW. RESULTS: In order to obtain the best protoplasts, the optimal enzymolysis time was selected as 4 h. The optimal lysozyme concentration was estimated at 0.8 mg/mL, because the protoplast formation rate and regeneration rate reached 90% and 30%, respectively, and their product reached the maximum. In this study, it was necessary that UV mutagenesis be excessive to obtain an expanded mutation library. For high lethality protoplasts, under the premise of minimal influence on its recovery, the optimal time for UV mutagenesis of protoplasts was 7 min, and the optimal time for thermal inactivation of protoplasts at 85 ℃ was 30 min. After homologous fusion, four fusion strains of E. coli were obtained, and their stability was analyzed by flow cytometry. The L-lysine yield of QDW-UH3 increased by 7.2% compared with that of QDW in a fermentation experiment, which promoted the expression of key enzymes in L-lysine synthesis, indicating that the combination of ultraviolet mutagenic breeding and protoplast fusion technology improved the acid-production level of the fusion strain. CONCLUSION: This method provides a novel approach for the targeted construction of microbial cell factories.

Biological modification of pentosans in wheat B starch wastewater and preparation of a composite film.

BACKGROUND: Petrochemical resources are becoming increasingly scarce, and petroleum-based plastic materials adversely impact the environment. Thus, replacement of petroleum-based materials with new and effective renewable materials is urgently required. RESULTS: In this study, a wheat pentosan-degrading bacterium (MXT-1) was isolated from wheat-processing plant wastewater. The MXT-1 strain was identified using molecular biology techniques. The degradation characteristics of the bacteria in wheat pentosan were analyzed. The results show that wheat pentosan was effectively degraded by bacteria. The molecular weight of fermented wheat pentosan decreased from 1730 to 257 kDa. The pentosan before and after the biological modification was mixed with chitosan to prepare a composite film. After fermentation, the water-vapor permeability of the wheat pentosan film decreased from 0.2769 to 0.1286 g mm (m2 h KPa)-1. Results obtained from the Fourier-transformed infrared experiments demonstrate that the wave number of the hydroxyl-stretching vibration peak of the membrane material decreased, and the width of the peak widened. The diffraction peak of the film shifted to the higher 2θ, as seen using X-ray diffraction. The cross-section of the modified composite membrane was observed via scanning electron microscopy, which revealed that the structure was denser; however, no detectable phase separation was observed. These results may indicate improved molecular compatibility between wheat pentosan and chitosan and stronger hydrogen bonding between the molecules. Given the increased number of short-chain wheat pentosan molecules, although the tensile strength of the film decreased, its flexibility increased after fermentation modification. CONCLUSION: The findings of this study established that the physical properties of polysaccharide films can be improved using strain MXT-1 to ferment and modify wheat pentosan. The compatibility and synergy between pentosan and chitosan molecules was substantially enhanced, and hydrogen bonding was strengthened after biological modification. Therefore, modified pentosan film could be a potential candidate material for edible packaging films.

Use of fulvic acid-like compounds from pulp-derived black liquor for enhancing the selenium content of peanut buds.

BACKGROUND: Cleaner production involving the extraction of useful material from the black liquor by-product of straw pulp would be environmentally beneficial and would permit increased wastewater usage. RESULTS: The fulvic-acid-like components of pulp black liquor (PFA) with molecular weights below 10 kDa were isolated. The chemical and physiological characteristics of PFAs were investigated. Selenite can enhance the selenium nutrition level of crops, but excessive selenite may be toxic to plant growth. In order to explore how to increase selenite tolerance and selenium accumulation in peanut, the effects of PFA on selenium-associated properties in peanut seedlings were examined by growing seedlings with sodium selenite (0, 5, 15, and 25 mg·L- 1 Na2SeO3, 15 mg·L- 1 Na2SeO3 solution containing 60 mg-C/L PFA, and 25 mg·L- 1 Na2SeO3 containing 60 mg-C/L PFA). CONCLUSION: The results showed that with 15 mg·L- 1 Na2SeO3, PFA significantly increased both the total and hypocotyl fresh weight of the seedlings but reduced the fresh weight of the root. PFA also effectively promoted the conversion of Se from inorganic to organic compounds in the root and hypocotyl, increased the soluble total sugar and soluble protein contents of the hypocotyl, and thus improved the edible quality and food safety of the selenium-enriched peanut buds. The results suggest that PFA can be used as an innovative bio-based substance for selenium-enriched sprout vegetable production.

Anti-Biofilm and Anti-Hemolysis Activities of 10-Hydroxy-2-decenoic Acid against Staphylococcus aureus.

Persistent infections caused by Staphylococcus aureus biofilms pose a major threat to global public health. 10-Hydroxy-2-decenoic acid (10-HDA), a main fatty acid in royal jelly, has been shown to possess various biological activities. The purpose of this study was to explore the effects of 10-HDA on the biofilms and virulence of S. aureus and its potential molecular mechanism. Quantitative crystal violet staining indicated that 10-HDA significantly reduced the biofilm biomass at sub-minimum inhibitory concentration (MIC) levels (1/32MIC to 1/2MIC). Scanning electron microscope (SEM) observations demonstrated that 10-HDA inhibited the secretion of extracellular polymeric substances, decreased bacterial adhesion and aggregation, and disrupted biofilm architecture. Moreover, 10-HDA could significantly decrease the biofilm viability and effectively eradicated the mature biofilms. It was also found that the hemolytic activity of S. aureus was significantly inhibited by 10-HDA. qRT-PCR analyses revealed that the expressions of global regulators sarA, agrA, and α-hemolysin gene hla were downregulated by 10-HDA. These results indicate that 10-HDA could be used as a potential natural antimicrobial agent to control the biofilm formation and virulence of S. aureus.

Performance Evaluation of Enzyme Breaker for Fracturing Applications under Simulated Reservoir Conditions.

Fracturing fluids are being increasingly used for viscosity development and proppant transport during hydraulic fracturing operations. Furthermore, the breaker is an important additive in fracturing fluid to extensively degrade the polymer mass after fracturing operations, thereby maximizing fracture conductivity and minimizing residual damaging materials. In this study, the efficacy of different enzyme breakers was examined in alkaline and medium-temperature reservoirs. The parameters considered were the effect of the breaker on shear resistance performance and sand-suspending performance of the fracturing fluid, its damage to the reservoir after gel breaking, and its gel-breaking efficiency. The experimental results verified that mannanase II is an enzyme breaker with excellent gel-breaking performance at medium temperatures and alkaline conditions. In addition, mannanase II did not adversely affect the shear resistance performance and sand-suspending performance of the fracturing fluid during hydraulic fracturing. For the same gel-breaking result, the concentration of mannanase II used was only one fifth of other enzyme breakers (e.g., mannanase I, galactosidase, and amylase). Moreover, the amount of residue and the particle size of the residues generated were also significantly lower than those of the ammonium persulfate breaker. Finally, we also examined the viscosity-reducing capability of mannanase II under a wide range of temperatures (104-158 °F) and pH values (7-8.5) to recommend its best-use concentrations under different fracturing conditions. The mannanase has potential for applications in low-permeability oilfield development and to maximize long-term productivity from unconventional oilwells.

Improving enzyme activity of glucosamine-6-phosphate synthase by semi-rational design strategy and computer analysis.

OBJECTIVE: To improve enzyme activity of Glucosamine-6-phosphate synthase (Glms) of Bacillus subtilis by site saturation mutagenesis at Leu593, Ala594, Lys595, Ser596 and Val597 based on computer-aided semi-rational design. RESULTS: The results indicated that L593S had the greatest effect on the activity of BsGlms and the enzyme activity increased from 5 to 48 U/mL. The mutation of L593S increased the yield of glucosamine by 1.6 times that of the original strain. The binding energy of the mutant with substrate was reduced from - 743.864 to - 768.246 kcal/mol. Molecular dynamics simulation results showed that Ser593 enhanced the flexibility of the protein, which ultimately led to increased enzyme activity. CONCLUSION: We successfully improved BsGlms activity through computer simulation and site saturation mutagenesis. This combination of methodologies may fit into an efficient workflow for improving Glms and other proteins activity.

Fully Conjugated Two-Dimensional sp2 -Carbon Covalent Organic Frameworks as Artificial Photosystem†I with High Efficiency.

The synthesis of fully conjugated sp2 -carbon covalent organic frameworks (COF) is extremely challenging given the difficulty of the formation of very stable carbon-carbon double bonds (-C=C-). Here, we report the successful preparation of a 2D COF (TP-COF) based on triazine as central planar units bridged by sp2 -carbon linkers through the -C=C- condensation reaction. High-resolution-transmission electron microscopy (HRTEM) clearly confirmed the tessellated hexagonal pore structure with a pore center-to-center distance of 2 nm. Powder X-ray diffraction (PXRD) together with structural simulations revealed an AA stacking mode of the obtained layered structure. TP-COF turned out to be an excellent semiconductor material with a LUMO energy of -3.23 eV and a band gap of 2.36 eV. Excitingly, this novel sp2 -carbon conjugated TP-COF exhibited unprecedented coenzyme regeneration efficiency and can significantly boost the coenzyme-assisted synthesis of l-glutamate to a record-breaking 97 % yield within 12 minutes.

Characterization and expression of glucosamine-6-phosphate synthase from Saccharomyces cerevisiae in Pichia pastoris.

Glucosamine-6-phosphate (GlcN-6-P) synthase from Saccharomyces cerevisiae was expressed in Pichia pastoris SMD1168 GIVING maximum activity of 96 U ml(-1) for the enzyme in the culture medium. By SDS-PAGE, the enzyme, a glycosylated protein, had an apparent molecular mass of 90 kDa. The enzyme was purified by gel exclusion chromatography to near homogeneity, with a 90 % yield and its properties were characterized. Optimal activities were at pH 5.5 and 55 °C, respectively, at which the highest specific activity was 6.8 U mg protein (-1). The enzyme was stable from pH 4.5 to 5.5 and from 45 to 60 °C. The Km and Vmax of the GlcN-6-P synthase towards D-fructose 6-phosphate were 2.8 mM and 6.9 µmol min(-1) mg(-1), respectively.

Enhanced Glucosamine Production with Actinomucor elegans Based on Stimulating Factor of Methanol.

Glucosamine (GlcN) is a major and valuable component in the cell wall of fungi. In this study, the cell wall was treated via a two-stage alkali and acid process, and chitin and chitosan were fully deacetylated, partially depolymerized, and converted to GlcN oligosaccharides. Then, the oligosaccharides were analyzed by high performance liquid chromatography. The influences of Actinomucor elegans on GlcN production in a flask culture were investigated to achieve an optimum yield of GlcN. The experimental result showed that cultivation in condition of pH 6.0, 100 mL working volume (500 mL flask), 10 % (v/v) inoculum concentration, at 28 °C and 200 rpm for 6 days yielded highest dry cell weight (DCW) which was 23.43 g L(-1), with a GlcN concentration of 5.12 g L(-1). Methanol as stimulating factor was found to exert the best effect in concentration of 1.5 % (v/v). With addition of methanol into medium, the DCW increased from 23.69 to 32.42 g L(-1), leading to maximum GlcN concentration of 6.85 g L(-1) obtained. Here, the methanol addition may be useful for industrial production of GlcN, and may also be meaningful for the production of other fine chemicals by filamentous fungi.

Biosynthesis of 10-Hydroxy-2-decenoic Acid through a One-Step Whole-Cell Catalysis.

10-Hydroxy-2-decenoic acid (10-HDA) is an important component of royal jelly, known for its antimicrobial, anti-inflammatory, blood pressure-lowering, and antiradiation effects. Currently, 10-HDA biosynthesis is limited by the substrate selectivity of acyl-coenzyme A dehydrogenase, which restricts the technique to a two-step process. This study aimed to develop an efficient and simplified method for synthesizing 10-HDA. In this study, ACOX from Candida tropicalis 1798, which catalyzes 10-hydroxydecanoyl coenzyme A desaturation for 10-HDA synthesis, was isolated and heterologously coexpressed with FadE, Macs, YdiI, and CYP in Escherichia coli/SK after knocking out FadB, FadJ, and FadR genes. The engineered E. coli/AKS strain achieved a 49.8% conversion of decanoic acid to 10-HDA. CYP expression was improved through ultraviolet mutagenesis and high-throughput screening, increased substrate conversion to 75.6%, and the synthesis of 10-HDA was increased to 0.628 g/L in 10 h. This is the highest conversion rate and product concentration achieved in the shortest time to date. This study provides a simple and efficient method for 10-HDA biosynthesis and offers an effective method for developing strains with high product yields.

Development of Raw Materials and Technology for Pulping-A Brief Review.

Paper is one of the most significant inventions in human civilization, which considerably advanced global cultural development. Pulping is a key step in the conversion of fiber raw materials into paper. Since its inception, pulping has rapidly evolved, continually adapting to technological advancements. Researchers are constantly investigating various types of raw materials for pulping. In this review, some of the materials employed in pulping are outlined, and the fiber content, pulping method, as well as the strength of wood and non-wood crop straw as pulping raw materials are analyzed and discussed. In addition, this review explores the effects of different materials under various pulping conditions and assesses the future trends in raw material selection for pulping while considering the current global environmental pressures.

Switchable enzyme mimics based on self-assembled peptides for polyethylene terephthalate degradation.

Polyethylene terephthalate (PET), the most abundant polyester plastic, has become a global concern due to its refractoriness and accumulation in the environment. In this study, inspired by the structure and catalytic mechanism of the native enzyme, peptides, based on supramolecular self-assembly, were developed to construct enzyme mimics for PET degradation, which were achieved by combining the enzymatic active sites of serine, histidine and aspartate with the self-assembling polypeptide MAX. The two designed peptides with differences in hydrophobic residues at two positions exhibited a conformational transition from random coil to ß-sheet by changing the pH and temperature, and the catalytic activity followed the self-assembly "switch" with the fibrils formed ß-sheet, which could catalyze PET efficiently. Although the two peptides possessed same catalytic site, they showed different catalytic activities. Analysis of the structure - activity relationship of the enzyme mimics suggested that the high catalytic activity of the enzyme mimics for PET could be attributed to the formation of stable fibers of peptides and ordered arrangement of molecular conformation; in addition, hydrogen bonding and hydrophobic interactions, as the major forces, promoted effects of enzyme mimics on PET degradation. Enzyme mimics with PET-hydrolytic activity are a promising material for degrading PET and reducing environmental pollution.

Biosynthesis and genetic engineering of phenazine-1-carboxylic acid in Pseudomonas chlororaphis Lzh-T5.

Phenazine-1-carboxylic acid (PCA) is a biologically active substance with the ability to prevent and control crop diseases. It was certified as a pesticide by the Ministry of Agriculture of China in 2011 and was named "Shenzimycin." Lzh-T5 is a Pseudomonas chlororaphis strain found in the rhizosphere of tomatoes. This strain can produce only 230 mg/L of PCA. We used LDA-4, which produces the phenazine synthetic intermediate trans-2,3-dihydro-3-hydroxyanthranilic acid in high amounts, as the starting strain. By restoring phzF and knocking out phzO, we achieved PCA accumulation. Moreover, PCA production was enhanced after knocking out negative regulators, enhancing the shikimate pathway, and performing fed-batch fermentation, thus resulting in the production of 10,653 mg/L of PCA. It suggested that P. chlororaphis Lzh-T5 has the potential to become an efficiency cell factory of biologically active substances.

Construction and Characterization of Fitting Equations for a New Wheat Straw Pulping Method.

The pretreatment of pulp with enzymes has been extensively studied in the laboratory. However, due to cost constraints, the application of enzymes in the pulp and paper industry is very limited. In this paper, an environment-friendly and efficient pulping method is proposed as an alternative to traditional pulping and papermaking methods. This new method overcomes the low efficiency and extreme pollution problems associated with traditional pulping methods. In addition, fitting equations for the new pulping method are constructed using data on enzyme treatments, which reflect the effect of enzymes and enable the realization of real-time control of the pulping process. The experimental results show that the efficiency of the pulping and papermaking process can be improved using biological enzymes, and the separation of cellulose can be facilitated using mixed enzymes, which have a better effect than single enzymes.

Improvement of optimum pH and specific activity of pectate lyase from Bacillus RN.1 using loop replacement.

Background: Alkaline pectate lyase plays an important role in papermaking, biological refining and wastewater treatment, but its industrial applications are largely limited owing to its low activity and poor alkali resistance. Methods: The alkaline pectate lyase BspPel from Bacillus RN.1 was heterologously expressed in Escherichia coli BL21 (DE3) and its activity and alkali resistance were improved by loop replacement. Simultaneously, the effect of R260 on enzyme alkaline tolerance was also explored. Results: Recombinant pectate lyase (BspPel-th) showed the highest activity at 60°C and pH 11.0, and showed significant stability over a wide pH range (3.0-11.0). The specific enzyme activity after purification was 139.4 U/mg, which was 4.4 times higher than that of the wild-type enzyme. BspPel-th has good affinity for apple pectin, since the V max and K m were 29 µmol/min. mL and 0.46 mol/L, respectively. Molecular dynamics simulation results showed that the flexibility of the loop region of BspPel-th was improved. Conclusion: The modified BspPel-th has considerable potential for industrial applications with high pH processes.

Flow-cytometric cell sorting coupled with UV mutagenesis for improving pectin lyase expression.

Introduction: Alkaline pectin lyase is an important enzyme with a wide range of applications in industrial production, It has been widely used in many important fields such as fruit juice processing and extraction, the dyeing and processing of cotton and linen textiles, degumming plant fibers, environmental industrial wastewater treatment, and pulp and paper production. PGLA-rep4 was previously generated as a modified alkaline pectin lyase with high specific activity at pH 11.0°C and 70°C. However, the pre-constructed high-activity pectin lyase expression strains are still difficult to apply in industrial production due to their limited enzymatic activity. We hope to solve these problems by combining modern breeding techniques with high-throughput equipment to rapidly screen alkaline pectin lyase with higher enzymatic activity and lower cost. Methods: We fused the genes encoding PGLA-rep4 and fluorescent protein egfp using a flexible linker peptide and ligated them into a temperature-sensitive plasmid, pKD46. The constructed screening plasmid pKD46-PGLA-rep4-egfp was then transformed into an expression host and screened via flow-cytometric cell sorting coupled with UV mutagenesis. Results: Following mutagenesis, primary screening, and secondary screening, the high-expression strain, named Escherichia coli BL21/1G3, was obtained. The screening plasmid pKD46-PGLA-rep4-egfp was eliminated, and the original expression plasmid pET28a-PGLA-rep4 was then retransformed into the mutant strains. After induction and fermentation, pectin lyase activity in E. coli BL21/1G3 was significantly increased (1.37-fold relative to that in the parental E. coli BL21/PGLA-rep4 strain, p < 0.001), and the highest activity was 230, 240 U/mL at 144 h. Genome sequencing revealed that genes encoding ribonuclease E (RNase E) and diadenosine tetraphosphatase (ApaH) of E. coli BL21/1G3 were mutated compared to the sequence in the original E. coli BL21 (DE3) strain, which could be associated with increased enzyme expression. Discussion: Our work provides an effective method for the construction of strains expressing pectin lyase at high levels.

A specific and rapid method for detecting Bacillus and Acinetobacter species in Daqu.

Daqu is a spontaneous, solid-state cereal fermentation product used for saccharification and as a starter culture for Chinese Baijiu production. Bacillus and Acinetobacter, two dominant microbial genera in Daqu, produce enzymes and organic acids that influence the Daqu quality. However, there are no rapid analytical methods for detecting Bacillus and Acinetobacter. We designed primers specific to the genera Bacillus and Acinetobacter to perform genetic comparisons using the 16 S rRNA. After amplification of polymerase chain reaction using specific primers, high-throughput sequencing was performed to detect strains of Bacillus and Acinetobacter. The results showed that the effective amplification rates for Bacillus and Acinetobacter in Daqu were 86.92% and 79.75%, respectively. Thus, we have devised and assessed a method to accurately identify the species associated with Bacillus and Acinetobacter in Daqu, which can also hold significance for bacterial typing and identification.

Exploration of microbiome diversity of stacked fermented grains by flow cytometry and cell sorting.

Sauce-flavor baijiu is one of the twelve flavor types of Chinese distilled fermented product. Microbial composition plays a key role in the stacked fermentation of Baijiu, which uses grains as raw materials and produces flavor compounds, however, the active microbial community and its relationship remain unclear. Here, we investigated the total and active microbial communities of stacked fermented grains of sauce-flavored Baijiu using flow cytometry and high-throughput sequencing technology, respectively. By using traditional high-throughput sequencing technology, a total of 24 bacterial and 14 fungal genera were identified as the core microbiota, the core bacteria were Lactobacillus (0.08-39.05%), Acetobacter (0.25-81.92%), Weissella (0.03-29.61%), etc. The core fungi were Issatchenkia (23.11-98.21%), Monascus (0.02-26.36%), Pichia (0.33-37.56%), etc. In contrast, using flow cytometry combined with high-throughput sequencing, the active dominant bacterial genera after cell sorting were found to be Herbaspirillum, Chitinophaga, Ralstonia, Phenylobacterium, Mucilaginibacter, and Bradyrhizobium, etc., whereas the active dominant fungal genera detected were Aspergillus, Pichia, Exophiala, Candelabrochaete, Italiomyces, and Papiliotrema, etc. These results indicate that although the abundance of Acetobacter, Monascus, and Issatchenkia was high after stacked fermentation, they may have little biological activity. Flow cytometry and cell sorting techniques have been used in the study of beer and wine, but exploring the microbiome in such a complex environment as Chinese baijiu has not been reported. The results also reveal that flow cytometry and cell sorting are convenient methods for rapidly monitoring complex microbial flora and can assist in exploring complex environmental samples.