RESUMEN
Manipulations of singlet oxygen (1 O2 ) generations by the integration of both aggregation-induced emission luminogen (AIEgen) photosensitizer and photochromic moieties have diversified features in photodynamic therapy applications. Through Förster resonance energy transfer (FRET) pathway to induce red PL emissions (at 595 nm) for 1 O2 productions, [1]rotaxane containing photosensitive tetraphenylethylene (TPE) donor and photochromic diarylethene (DAE) acceptor is introduced to achieve dual and sequential locked/unlocked photoswitching effects by pH-controlled shuttling of its contracted/extended forms. Interestingly, the UV-enabled DAE ring closure speeds follow the reversed trend of DAE self-constraint degree as: contracted < extended < noninterlocked forms in [1]rotaxane analogues, thus FRET processes can be adjusted in contracted/extended forms of [1]rotaxane upon UV irradiations. Accordingly, the contracted form of [1]rotaxane is FRET-OFF locked and inert to UV exposure due to the larger bending conformation of DAE parallel (p-)conformer, compared with its extended and noninterlocked analogues possessing switchable FRET-OFF/ON behaviors activated by dual and sequential pH- and photoswitching. Owing to the advantages of 1 O2 productions tuned by multistimuli inputs (pH, UV, and blue light), an useful logic circuit for toxicity outputs of the surface modified [1]rotaxane nanoparticles (NPs) has been demonstrated to offer promising 1 O2 productions and managements based on mechanically interlocked molecules for future bioapplications.
RESUMEN
ß-Xylosidases catalyze the hydrolysis of xylooligosaccharides to xylose in the final step of hemicellulose degradation. AnBX, which is a GH3 ß-xylosidase from Aspergillus niger, has a high catalytic efficiency toward xyloside substrates. In this study, we report the three-dimensional structure and the identification of catalytic and substrate binding residues of AnBX by performing site-directed mutagenesis, kinetic analysis, and NMR spectroscopy-associated analysis of the azide rescue reaction. The structure of the E88A mutant of AnBX, determined at 2.5-Å resolution, contains two molecules in the asymmetric unit, each of which is composed of three domains, namely an N-terminal (ß/α)8 TIM-barrel-like domain, an (α/ß)6 sandwich domain, and a C-terminal fibronectin type III domain. Asp288 and Glu500 of AnBX were experimentally confirmed to act as the catalytic nucleophile and acid/base catalyst, respectively. The crystal structure revealed that Trp86, Glu88 and Cys289, which formed a disulfide bond with Cys321, were located at subsite -1. Although the E88D and C289W mutations reduced catalytic efficiency toward all four substrates tested, the substitution of Trp86 with Ala, Asp and Ser increased the substrate preference for glucoside relative to xyloside substrates, indicating that Trp86 is responsible for the xyloside specificity of AnBX. The structural and biochemical information of AnBX obtained in this study provides invaluable insight into modulating the enzymatic properties for the hydrolysis of lignocellulosic biomass. KEY POINTS: ⢠Asp288 and Glu500 of AnBX are the nucleophile and acid/base catalyst, respectively ⢠Glu88 and the Cys289-Cys321 disulfide bond are crucial for the catalytic activity of AnBX ⢠The W86A and W86S mutations in AnBX increased the preference for glucoside substrates.
Asunto(s)
Aspergillus niger , Xilosidasas , Aspergillus niger/metabolismo , Cinética , Aminoácidos , Dominio Catalítico , Xilosidasas/metabolismo , Catálisis , Glucósidos , Disulfuros , Especificidad por Sustrato , Glicósido Hidrolasas/metabolismoRESUMEN
Hyaluronic acid (HA) is a ubiquitous glycosaminoglycan in the extracellular matrix and a ligand of CD44, a transmembrane glycoprotein that is important in cell migration. Crystal and NMR studies found a hexasaccharide of the pattern (GlcA-GlcNAc)3 as the shortest HA that could bind to CD44, but molecular dynamics simulations indicated that a tetrasaccharide of the pattern (GlcNAc-GlcA)2 is the key structure interacting with CD44. Access to oligomers with such a repeat pattern is crucial in binding studies with CD44. Here we developed a synthetic procedure to afford the HA oligosaccharides with the GlcNAc-GlcA repeating unit and measured the binding interaction between these sugars and human CD44 by isothermal titration calorimetry (ITC). During the chemical synthesis, we successfully generated the ß-glycosidic bond in the absence of neighbouring group participation and overcome the issues in the oxidation step. In addition, ammonia-free dissolving metal reduction for debenzylation and azido reduction has been applied in carbohydrate synthesis for the first time. ITC analysis revealed that the HA tetrasaccharide (GlcNAc-GlcA)2 could indeed interact and bind to the human CD44.
Asunto(s)
Receptores de Hialuranos/química , Ácido Hialurónico/química , Oligosacáridos/química , Sitios de Unión , Conformación de Carbohidratos , Humanos , Ácido Hialurónico/síntesis química , Oligosacáridos/síntesis química , Oxidación-ReducciónRESUMEN
Ozonolysis of isoprene to produce Criegee intermediates such as methyl vinyl ketone oxide (MVKO), C2H3C(CH3)OO, is an important process in atmospheric chemistry. MVKO was recently produced and identified in laboratories after photolysis of a gaseous mixture of 1,3-diiodo-but-2-ene, (CH2I)HCâC(CH3)I, and O2, but the mechanism of its formation remains unexplored. We synthesized pure (Z)- and (E)-1,3-diiodo-but-2-ene and measured their distinct IR spectra. Upon irradiation at 280 nm of (Z)- and (E)-1,3-diiodo-but-2-ene in solid p-H2 at 3.3 K, the fission of the terminal C-I bond yields (Z)- and (E)-3-iodo-but-2-en-1-yl [â¢C2H3C(CH3)I] radicals, respectively. These radicals were characterized with infrared absorption lines at 2962.4, 1423.8, 1265.3, 1120.9/1127.0, 921.4/922.3, and 792.5/791.7 cm-1, and 16 additional weaker lines for (Z)-â¢C2H3C(CH3)I and 1405.2, 1208.2, 1106.0/1103.9, 934.2/933.4, and 785.1/784.9 cm-1 and five additional weaker ones for (E)-â¢C2H3C(CH3)I. The assignments were derived according to behavior on secondary photolysis and comparison of the vibrational wavenumbers and the IR intensities of observed lines with those calculated with the B2PLYP-D3/aug-cc-pVTZ-pp method. These observations confirmed that only the terminal I atom, not the central one, was photodissociated at 280 nm and, in solid p-H2, the excess energy after photodissociation induced no change in conformation. These new spectra of â¢C2H3C(CH3)I radicals can provide valuable information for the understanding of the mechanism of formation of Criegee intermediate MVKO from the source reaction of photolysis of (CH2I)HCâC(CH3)I in O2 in the laboratory.
RESUMEN
Many circulating cancer-related proteins, such as fibroblast growth factors (FGFs), associate with glycosaminoglycans-particularly heparan sulfate-at the cell surface. Disaccharide analogues of heparan sulfate had previously been identified as the shortest components out of the sugars that bind to FGF-1 and FGF-2. Taking note of the typical pose of l-iduronic acid, we conceived of per-O-sulfonated analogues of such disaccharides, and devised a single-step procedure for per-O-sulfonation of unprotected sugars with concomitant 1,6-anhydro bridge formation to achieve such compounds through direct use of SO3 â Et3 N as sulfonation reagent and dimethylformamide as solvent. The synthesized sugars based on the oligomaltose backbone bound FGF-1 and FGF-2 mostly at the sub-micromolar level, although the tetrasaccharide analogue achieved low-nanomolar binding with FGF-2.
Asunto(s)
Factores de Crecimiento de Fibroblastos/química , Heparitina Sulfato/química , Azúcares/química , Conformación de CarbohidratosRESUMEN
Boronic acids (BAs) provide strong potential in orientation immobilization of antibody and the modification method is crucial for efficiency optimization. A highly effective method has been developed for rapid antibody immobilization on gold electrodes through the electrodeposition of a BAâ»containing linker in this study. Aniline-based BA forms a condense layer while antibody could automatically immobilize on the surface of the electrode. Compare to traditional self-assembled monolayer method, the electrodeposition process dramatically reduces the modification time from days to seconds. It also enhances the immobilized efficiency from 95 to 408 (ng/cm²) with a strong preference being exhibited for shorter aniline-based linkers.
Asunto(s)
Anticuerpos Inmovilizados/química , Técnicas Biosensibles , Ácidos Borónicos/química , Tecnicas de Microbalanza del Cristal de Cuarzo , Adsorción , Compuestos de Anilina/química , Anticuerpos Inmovilizados/inmunología , Electrodos , Oro/química , HumanosRESUMEN
OBJECTIVES: A Neissaria bacterial pilus sugar, bacillosamine, was synthesized and, for the first time, used as a probe to screen a single-chain variable fragment (scFv). RESULTS: Four Neisseria, Neisseria gonorrhoeae, Neisseria meningitidis, Neisseria sicca and Neisseria subflava, and two negative controls, Streptococcus pneumoniae and Escherichia coli, were tested through ELISA, immunostaining and gold nanoparticle immunological assay. All results indicated that the selected scFv is feasible for the specific detection of Neisseria species via the recognition of bacillosamine. CONCLUSIONS: The recombinant scFv could detect Neisseria strains at 106 CFU/ml.
Asunto(s)
Anticuerpos Antibacterianos/inmunología , Neisseria/inmunología , Ingeniería de Proteínas/métodos , Especificidad de Anticuerpos/inmunología , Electroforesis en Gel de Poliacrilamida , Oro/química , Nanopartículas/química , Anticuerpos de Cadena Única/metabolismo , Especificidad de la EspecieRESUMEN
Glycosyltransferase-1 from Bacillus cereus (BcGT1) catalyzes a reaction that transfers a glucosyl moiety to flavonoids, such as quercetin, kaempferol, and myricetin. The enzymatic glucosidation shows a broad substrate specificity when the reaction is catalyzed by wild-type BcGT1. Preliminary assays demonstrated that the F240A mutant significantly improves the regioselectivity of enzymatic glucosidation toward quercetin. To unveil and further to control the catalytic function of BcGT1, mutation of F240 to other amino acids, such as C, E, G, R, Y, W, and K, was performed. Among these mutants, F240A, F240G, F240R, and F240K greatly altered the regioselectivity. The quercetin-3-O-glucoside, instead of quercetin-7-O-glucoside as for the wild-type enzyme, was obtained as the major product. Among these mutants, F240R showed nearly 100 % product specificity but only retained 25 % catalytic efficiency of wild-type enzyme. From an inspection of the protein structure, we found two other amino acids, F132 and F138, together with F240, are likely to form a hydrophobic binding region, which is sufficiently spacious to accommodate substrates with varied aromatic moieties. Through the replacement of a phenylalanine by a tyrosine residue in the substrate-binding region, the mutants may be able to fix the orientation of flavonoids, presumably through the formation of a hydrogen bond between substrates and mutants. Multiple mutants-F240R_F132Y, F240R_F138Y, and F240R_F132Y_F138Y-were thus constructed for further investigation. The multiple points of mutants not only maintained the high product specificity but also significantly improved the catalytic efficiency, relative to F240R. The same product specificity was obtained when kaempferol and myricetin were used as a substrate.
Asunto(s)
Aminoácidos/genética , Aminoácidos/metabolismo , Bacillus cereus/enzimología , Flavonoides/metabolismo , Glicosiltransferasas/genética , Glicosiltransferasas/metabolismo , Sustitución de Aminoácidos , Sitios de Unión , Glicosilación , Glicosiltransferasas/química , Mutagénesis Sitio-Dirigida , Proteínas Mutantes/genética , Proteínas Mutantes/metabolismo , Conformación Proteica , Especificidad por SustratoRESUMEN
Glycosyltransferase 1 from Bacillus cereus (BcGT1) catalyzes the transfer of a glucosyl moiety from uridine diphosphate glucose (UDP-glucose) to various acceptors; it was expressed and characterized. The specificity of acceptors was found to be broad: more than 20 compounds classified into O-, S-, and N-linkage glucosides can be prepared with BcGT1 catalysis. Based on this work, we conclude that the corresponding acceptors of these compounds must possess the following features: (1) the acceptors must contain at least one aromatic or fused-aromatic or heteroaromatic ring; (2) the reactive hydroxyl or sulfhydryl or amino group can attach either on the aromatic ring or on its aliphatic side chain; and (3) the acceptors can be a primary, secondary, or even a tertiary amine. Four representative acceptors-fluorescein methyl ester, 17-ß-estradiol, 7-mercapto-4-methylcoumarin, and 6-benzylaminopurine-were chosen as a candidate acceptor for O-, S-, and N-glucosidation, respectively. These enzymatic products were purified and the structures were confirmed with mass and NMR spectra. As all isolated glucosides are ß-anomers, BcGT1 is confirmed to be an inverting enzyme. This study not only demonstrates the substrate promiscuity of BcGT1 but also showed the great application prospect of this enzyme in bioconversion of valuable bioactive molecules.
Asunto(s)
Bacillus cereus/enzimología , Proteínas Bacterianas/metabolismo , Glucósidos/metabolismo , Glicosiltransferasas/metabolismo , Bacillus cereus/genética , Proteínas Bacterianas/genética , Compuestos de Bencilo/metabolismo , Cumarinas/metabolismo , Escherichia coli/genética , Escherichia coli/metabolismo , Estradiol/metabolismo , Glicosiltransferasas/genética , Espectroscopía de Resonancia Magnética , Purinas/metabolismo , Proteínas Recombinantes/genética , Proteínas Recombinantes/metabolismo , Especificidad por Sustrato , Uridina Difosfato Glucosa/metabolismoRESUMEN
ß-Xylosidases catalyze the breakdown of ß-1,4-xylooligosaccharides, which are produced from degradation of xylan by xylanases, to fermentable xylose. Due to their important role in xylan degradation, there is an interest in using these enzymes in biofuel production from lignocellulosic biomass. In this study, the coding sequence of a glycoside hydrolase family 3 ß-xylosidase from Aspergillus niger ASKU28 (AnBX) was cloned and expressed in Pichia pastoris as an N-terminal fusion protein with the α-mating factor signal sequence (α-MF) and a poly-histidine tag. The expression level was increased to 5.7 g/l in a fermenter system as a result of optimization of only five codons near the 5' end of the α-MF sequence. The recombinant AnBX was purified to homogeneity through a single-step Phenyl Sepharose chromatography. The enzyme exhibited an optimal activity at 70°C and at pH 4.0-4.5, and a very high kinetic efficiency toward a xyloside substrate. AnBX demonstrated an exo-type activity with retention of the ß-configuration, and a synergistic action with xylanase in hydrolysis of beechwood xylan. This study provides comprehensive data on characterization of a glycoside hydrolase family 3 ß-xylosidase that have not been determined in any prior investigations. Our results suggested that AnBX may be useful for degradation of lignocellulosic biomass in bioethanol production, pulp bleaching process and beverage industry.
Asunto(s)
Aspergillus niger/enzimología , Proteínas Fúngicas/metabolismo , Proteínas Recombinantes/metabolismo , Xilosidasas/metabolismo , Clonación Molecular , Codón/genética , Proteínas Fúngicas/química , Proteínas Fúngicas/genética , Proteínas Fúngicas/aislamiento & purificación , Hidrólisis , Cinética , Proteínas Recombinantes/química , Proteínas Recombinantes/genética , Proteínas Recombinantes/aislamiento & purificación , Xilanos , Xilosidasas/química , Xilosidasas/genética , Xilosidasas/aislamiento & purificaciónRESUMEN
Development of rapid detection strategies that target potentially pathogenic bacteria has gained increasing attention due to the increasing awareness for better health and safety. In this study, we evaluate an intrinsically antimicrobial polymer, 2Gdm, which is a poly(norbornene)-based functional polymer featuring guanidinium groups as side chains, for bacterial detection by the means of triboelectric nanogenerators (TENGs) and triboelectric nanosensors (TENSs). Attachment of bacteria to the sensing layer is anticipated to alter the overall triboelectric properties of the underlying polymer layer. The positively charged guanidinium functional groups can interact with the negatively charged phospholipid bilayer of bacteria and lead to bacterial death, which can then be detected by optical microscopy, X-ray photoelectron microscopy, and more advanced self-powered sensing techniques such as TENGs and TENSs. The double bonds present along the poly(norbornene) backbone allow for thermally induced cross-linking to obtain X-2Gdm and thus rendering materials remain stable in water. By monitoring the change in voltage output after immersion in various concentrations of Gram-negative Escherichia coli (E. coli) and Gram-positive Streptococcus pneumoniae (S. pneumoniae), we have demonstrated the utility of X-2Gdm as a new polymer dielectric for autonomous bacterial detection. As the bacterial concentration increases, the amount of adsorbed bacteria also increases, resulting in a decrease in the surface potential of the X-2Gdm thin film; this reduction in surface potential can cause a decrease in the triboelectric output for both TENGs and TENSs, which serves as a key working mechanism for facile bacterial detection. TENG and TENS systems are capable of detecting E. coli and S. pneumoniae within a range of 4 × 105 to 4 × 108 CFU/mL with a limit of detection of 106 CFU/mL. This report highlights the promising prospects of employing TENGs and TENSs as innovative sensing technologies for rapid bacterial detection by leveraging the electrostatic interactions between bacterial cell membranes and cationic groups present on polymer surfaces.
Asunto(s)
Bacterias , Escherichia coli , Guanidina , Norbornanos , Poli A , Polímeros , Streptococcus pneumoniaeRESUMEN
The first tunable nano-bending structures of [1]rotaxane containing a single-fluorophoric N,N'-diphenyl-dihydrodibenzo[a,c]phenazine (DPAC) moiety (i.e., [1]RA) are developed as a loosened lasso structure to feature the bright white-light emission [CIE (0.27, 0.33), Φ = 21.2%] in THF solution, where bi-stable states of bending and twisted structures of DPAC unit in [1]RA produce cyan and orange emissions at 480 and 600 nm, respectively. With acid/base controls, tunable loosened/tightened nano-loops of corresponding [1]rotaxanes (i.e., [1]RA/[1]RB) can be achieved via the shuttling of macrocycles reversibly, and thus to adjust their respective white-light/cyan emissions, where the cyan emission of [1]RB is obtained due to the largest conformational constraint of DPAC moiety in its bending form of [1]RB with a tightened lasso structure. Additionally, the non-interlocked analog M-Boc only shows the orange emission, revealing the twisted form of DPAC fluorophore in M-Boc without any conformational constraint. Moreover, the utilization of solvents (with different viscosities and polarities), temperatures, and water fractions could serve as effective tools to adjust the bi-stable vibration-induced emission (VIE) colors of [1]rotaxanes. Finally, tuning ratiometric emission colors of adaptive conformations of DPAC moieties by altering nano-bending structures in [1]rotaxanes and external stimuli can be further developed as intelligent temperature and viscosity sensor materials.
RESUMEN
The self-trapping nano-loop structures of [1]rotaxanes exhibited multiple Förster resonance energy transfer (FRET) patterns via dual and sequential locking/unlocking of pH-gated and UV exposure processes. As a tightened and constrained nano-loop in the acidic condition, dithienylethene (DTE) unit was locked in the highly bending open form to forbid ring closure upon UV irradiation.
Asunto(s)
Transferencia Resonante de Energía de Fluorescencia , Rotaxanos , Rotaxanos/química , Rayos UltravioletaRESUMEN
Bistable [c2] daisy chain rotaxanes with respective extended and contracted forms of [c2]A and [c2]B containing a blue-emissive anthracene (AN) donor and orange-emissive indandione-carbazole (IC) acceptor were successfully synthesized via click reaction. Tunable-emission bistable [c2] daisy chain rotaxanes with fluorescence changes from blue to orange, including bright-white-light emissions, could be modulated by the aggregation-induced emission (AIE) characteristics and Förster resonance energy transfer (FRET) processes through altering water fractions and shuttling processes (i.e., acid/base controls). Accordingly, as a result of excellent fine-tuning AIE (at 60% water content of H2O/THF) and FRET (with a compatible energy transfer of EFRET = 33.2%) behaviors after the shuttling process (by adding base), the brightest white-light emission at CIE (0.31, 0.37) with a quantum yield of Φ = 15.64% was obtained in contracted [c2]B with good control of molecular shuttling to possess higher photoluminescence (PL) quantum yields and better energy transfer efficiencies (i.e., the manipulation of reduced PET and enhanced FRET processes) due to their intramolecular aggregations of blue AN donors and orange IC acceptors with a proper water content of 60% H2O. Furthermore, dynamic light-scattering (DLS) and time-resolved photoluminescence (TRPL) measurements, along with theoretical calculations, were utilized to investigate and confirm AIE and FRET phenomena of bistable [c2] daisy chain rotaxanes. Especially, both bistable [c2] daisy chain rotaxanes [c2]A and [c2]B and noninterlocked monomer M could be exploited for the applications of ratiometric fluorescence temperature sensing due to the temperature effects on the AIE and FRET features. Based on these desirable bistable [c2] daisy chain rotaxane structures, this work provides a potential strategy for the future applications of tunable multicolor emission and ratiometric fluorescence temperature-sensing materials.
RESUMEN
Chitinases hydrolyze chitin, an insoluble linear polymer of N-acetyl-d-glucosamine (NAG)(n), into nutrient sources. Bacillus cereus NCTU2 chitinase (ChiNCTU2) predominantly produces chitobioses and belongs to glycoside hydrolase family 18. The crystal structure of wild-type ChiNCTU2 comprises only a catalytic domain, unlike other chitinases that are equipped with additional chitin binding and insertion domains to bind substrates into the active site. Lacking chitin binding and chitin insertion domains, ChiNCTU2 utilizes two dynamic loops (Gly-67-Thr-69 and Ile-106-Val-112) to interact with (NAG)(n), generating novel substrate binding and distortion for catalysis. Gln-109 is crucial for direct binding with substrates, leading to conformational changes of two loops with a maximum shift of â¼4.6 Å along the binding cleft. The structures of E145Q, E145Q/Y227F, and E145G/Y227F mutants complexed with (NAG)(n) reveal (NAG)(2), (NAG)(2), and (NAG)(4) in the active site, respectively, implying various stages of reaction: before hydrolysis, E145G/Y227F with (NAG)(4); in an intermediate state, E145Q/Y227F with a boat-form NAG at the -1 subsite, -1-(NAG); after hydrolysis, E145Q with a chair form -1-(NAG). Several residues were confirmed to play catalytic roles: Glu-145 in cleavage of the glycosidic bond between -1-(NAG) and +1-(NAG); Tyr-227 in the conformational change of -1-(NAG); Asp-143 and Gln-225 in stabilizing the conformation of -1-(NAG). Additionally, Glu-190 acts in the process of product release, and Tyr-193 coordinates with water for catalysis. Residues Asp-143, E145Q, Glu-190, and Tyr-193 exhibit multiple conformations for functions. The inhibitors zinc ions and cyclo-(l-His-l-Pro) are located at various positions and confirm the catalytic-site topology. Together with kinetics analyses of related mutants, the structures of ChiNCTU2 and its mutant complexes with (NAG)(n) provide new insights into its substrate binding and the mechanistic action.
Asunto(s)
Bacillus cereus/enzimología , Proteínas Bacterianas/química , Quitinasas/química , Sustitución de Aminoácidos , Bacillus cereus/genética , Proteínas Bacterianas/genética , Proteínas Bacterianas/metabolismo , Sitios de Unión , Catálisis , Quitinasas/genética , Quitinasas/metabolismo , Cristalografía por Rayos X , Disacáridos/química , Disacáridos/genética , Disacáridos/metabolismo , Cinética , Mutación Missense , Estructura Secundaria de Proteína , Relación Estructura-ActividadRESUMEN
Porcine circovirus type 2 (PCV2) is the primary causative agent of porcine circovirus-associated disease (PCVAD) that causes huge global economic losses for the swine industry. Effective strategies or rapid detection of PCV2 in pig are essential to control PCVAD. Here, single-chain variable fragments (scFvs) were selected and characterized against the PCV2 capsid using phage display technology. Phage scFv clones were selected from the human scFv phagemid library (Tomlinson I + J) for direct panning against the PCV2 capsid. Eighty-four monoclonal phage scFvs were individually tested for binding to the PCV2 capsid by ELISA. Eight scFv clones showed significant binding to the PCV2 capsid and only three clones (clone nos. 13, 37, and 81) contained both VHCDRs and VLCDRs in the sequence. Clone scFv no. 81 had the highest reactivity to the PCV2 capsid and was constructed in the pET22b (+) expression vector. The recombinant was transformed to Escherichia coli BL21(DE3) for expression and purification. The scFv showed appropriate affinity to the PCV2 capsid by western blot analysis. Kinetics of scFv and the PCV2 capsid were determined using surface plasmon resonance and showed binding affinity in the nanomolar range (K D = 57.2 nM). Our scFv was first applied in the development of an impedimetric immunosensor for PCV2 capsid detection, and results showed that impedance increased with increasing PCV2 capsid expression with limit of detection = 114 nM. Findings demonstrated that our scFv has potential for use as a receptor for biosensor devices.
RESUMEN
Enzyme-linked immunosorbent assays (ELISAs) are tests that uses antibody recognition and enzyme catalytic activity to identify a substance, and they have been widely used as a diagnostic tool in the clinic. However, performing an ELISA requires various liquid handling steps and long binding times. To solve this problem, we developed a magnetic microfluidic ELISA system (MMF-ELISA). Integration with nickel magnetic nanoparticles can streamline the ELISA process in a fully automated manner for Streptococcus pneumoniae detection. First, we synthesized paramagnetic surface-oxidized nickel nanoparticles (Ni/NiO NPs) to carry protein G. Then, we assembled a SUM290 (UlaG)-specific antibody on protein G. Finally, we integrated the NPs on a microfluidics chip for S. pneumoniae detection. The chip contains three different layers to trap the solutions; the bottom layer SiO2 is patterned on hydrophobic polymers and integrated with the middle layer PDMS and the top layer PMMA. With Arduino and motor IC, we developed an automated platform for S. pneumoniae detection. Microfluidic ELISAs can reduce the manual handling and operation time. Furthermore, the developed system can be extended to multiple areas for ELISA-related assays. This economical, rapid and portable system may become a promising platform for sensing S. pneumoniae in clinical applications.
RESUMEN
The novel multistimuli-responsive monofluorophoric supramolecular polymer Poly(TPE-DBC)/FL-DBA and pseudo[3]rotaxane TPE-DBC/FL-DBA consisted of the closed form of nonemissive fluorescein guest FL-DBA along with TPE-based main-chain macrocyclic polymer Poly(TPE-DBC) and TPE-functionalized macrocycle TPE-DBC hosts, respectively. By the combination of various external stimuli, these fluorescent supramolecular host-guest systems could reveal interesting photoluminescence (PL) properties in DMF/H2O (1:1, v/v) solutions, including bifluorophoric host-guest systems after the complexation of Al3+ ion, i.e., TPE-DBC/FL-DBA-Al3+ and Poly(TPE-DBC)/FL-DBA-Al3+ with their corresponding open form of fluorescein guest FL-DBA-Al3+. Importantly, the Förster resonance energy transfer (FRET) processes occurred in both bifluorophoric host-guest systems between blue-emissive TPE donors (λem = 470 nm) and green-emissive fluorescein acceptors (λem = 527 nm) after aluminum detection, which were further verified by time-resolved photoluminescence (TRPL) measurements to acquire their FRET efficiencies of 40.4 and 31.1%, respectively. Both supramolecular host-guest systems exhibited stronger green fluorescein emissions as well as appealing ratiometric PL behaviors within the desirable donor-acceptor distances of FRET processes in comparison with their detached analogous mixtures. Regarding the pH effects, the optimum green fluorescein emissions with effective FRET processes of all compounds and host-guest systems were sustained in the range pH = 7-10. Interestingly, both host-guest systems TPE-DBC/FL-DBA and Poly(TPE-DBC)/FL-DBA possessed high sensitivities and selectivities toward aluminum ion to display their strong green emissions via FRET-ON behaviors due to the chelation-induced ring opening of spirolactam moieties to become green-emissive guest acceptor FL-DBA-Al3+, which offered excellent limit of detection (LOD) values of 50.61 and 38.59 nM, respectively, to be further applied for the fabrication of facile test strips toward aluminum detection. Accordingly, the inventive ratiometric PL and FRET sensor approaches of supramolecular host-guest systems toward aluminum ion with prominent sensitivities and selectivities were well-established in this study.
RESUMEN
(1) Background: Lung cancer is silent in its early stages and fatal in its advanced stages. The current examinations for lung cancer are usually based on imaging. Conventional chest X-rays lack accuracy, and chest computed tomography (CT) is associated with radiation exposure and cost, limiting screening effectiveness. Breathomics, a noninvasive strategy, has recently been studied extensively. Volatile organic compounds (VOCs) derived from human breath can reflect metabolic changes caused by diseases and possibly serve as biomarkers of lung cancer. (2) Methods: The selected ion flow tube mass spectrometry (SIFT-MS) technique was used to quantitatively analyze 116 VOCs in breath samples from 148 patients with histologically confirmed lung cancers and 168 healthy volunteers. We used eXtreme Gradient Boosting (XGBoost), a machine learning method, to build a model for predicting lung cancer occurrence based on quantitative VOC measurements. (3) Results: The proposed prediction model achieved better performance than other previous approaches, with an accuracy, sensitivity, specificity, and area under the curve (AUC) of 0.89, 0.82, 0.94, and 0.95, respectively. When we further adjusted the confounding effect of environmental VOCs on the relationship between participants' exhaled VOCs and lung cancer occurrence, our model was improved to reach 0.92 accuracy, 0.96 sensitivity, 0.88 specificity, and 0.98 AUC. (4) Conclusion: A quantitative VOCs databank integrated with the application of an XGBoost classifier provides a persuasive platform for lung cancer prediction.
RESUMEN
Laminaripentaose-producing beta-1,3-glucanase (LPHase), a member of glycoside hydrolase family 64, cleaves a long-chain polysaccharide beta-1,3-glucan into specific pentasaccharide oligomers. The crystal structure of LPHase from Streptomyces matensis DIC-108 was solved to 1.62 A resolution using multiple-wavelength anomalous dispersion methods. The LPHase structure reveals a novel crescent-like fold; it consists of a barrel domain and a mixed (alpha/beta) domain, forming a wide-open groove between the two domains. The liganded crystal structure was also solved to 1.80 A, showing limited conformational changes. Within the wide groove, a laminaritetraose molecule is found to sit in an electronegatively charged central region and is proximal to several conserved residues including two carboxylates (Glu(154) and Asp(170)) and four other sugar-binding residues (Thr(156), Asn(158), Trp(163), and Thr(167)). Molecular modeling using a laminarihexaose as a substrate suggests roles for Glu(154) and Asp(170) as acid and base catalysts, respectively, whereas the side chains of Thr(156), Asn(158), and Trp(163) demarcate subsite +5. Site-directed mutagenesis of Glu(154) and Asp(170) confirms that both carboxylates are essential for catalysis. Together, our results suggest that LPHase uses a direct displacement mechanism involving Glu(154) and Asp(170) to cleave a beta-1,3-glucan into specific alpha-pentasaccharide oligomers.