RESUMEN
Two-dimensional heterostructures are excellent platforms to realize twist-angle-independent ultra-low friction due to their weak interlayer van der Waals interactions and natural lattice mismatch. However, for finite-size interfaces, the effect of domain edges on the friction process remains unclear. Here we report the superlubricity phenomenon and the edge-pinning effect at MoS2/graphite and MoS2/hexagonal boron nitride van der Waals heterostructure interfaces. We found that the friction coefficients of these heterostructures are below 10-6. Molecular dynamics simulations corroborate the experiments, which highlights the contribution of edges and interface steps to friction forces. Our experiments and simulations provide more information on the sliding mechanism of finite low-dimensional structures, which is vital to understand the friction process of laminar solid lubricants.
Asunto(s)
Grafito , Fricción , Grafito/química , Simulación de Dinámica MolecularRESUMEN
In 2D semiconductors, doping offers an effective approach to modulate their optical and electronic properties. Here, an in situ doping of oxygen atoms in monolayer molybdenum disulfide (MoS2 ) is reported during the chemical vapor deposition process. Oxygen concentrations up to 20-25% can be reliable achieved in these doped monolayers, MoS2- x Ox . These oxygen dopants are in a form of substitution of sulfur atoms in the MoS2 lattice and can reduce the bandgap of intrinsic MoS2 without introducing in-gap states as confirmed by photoluminescence spectroscopy and scanning tunneling spectroscopy. Field effect transistors made of monolayer MoS2- x Ox show enhanced electrical performances, such as high field-effect mobility (≈100 cm2 V-1 s-1 ) and inverter gain, ultrahigh devices' on/off ratio (>109 ) and small subthreshold swing value (≈80 mV dec-1 ). This in situ oxygen doping technique holds great promise on developing advanced electronics based on 2D semiconductors.
RESUMEN
The determination of the electronic structure by edge geometry is unique to graphene. In theory, an evanescent nonchiral edge state is predicted at the zigzag edges of graphene. Up to now, the approach used to study zigzag-edged graphene has mostly been limited to scanning tunneling microscopy. The transport properties have not been revealed. Recent advances in hydrogen plasma-assisted "top-down" fabrication of zigzag-edged graphene nanoribbons (Z-GNRs) have allowed us to investigate edge-related transport properties. In this Letter, we report the magnetotransport properties of Z-GNRs down to â¼70 nm wide on an h-BN substrate. In the quantum Hall effect regime, a prominent conductance peak is observed at Landau ν=0, which is absent in GNRs with nonzigzag edges. The conductance peak persists under perpendicular magnetic fields and low temperatures. At a zero magnetic field, a nonlocal voltage signal, evidenced by edge conduction, is detected. These prominent transport features are closely related to the observable density of states at the hydrogen-etched zigzag edge of graphene probed by scanning tunneling spectroscopy, which qualitatively matches the theoretically predicted electronic structure for zigzag-edged graphene. Our study gives important insights for the design of new edge-related electronic devices.
RESUMEN
Organic two-dimensional (2D) crystals are fundamentally important for development of future devices. Despite that more than a half of man-made products contain polymers, 2D crystals consisting of long linear chains have yet to be explored. Here we report on the fabrication of 2D polyaniline (PANI) crystals via rational electrochemical polymerization followed by liquid-phase exfoliation. The 2D PANI is molecularly thin (â¼0.8 nm) and composed of PANI chains with a number-average molecular weight of â¼31â¯000. The chains are parallel to each other with the benzene rings standing almost vertically to the surface, implying a face-to-face arrangement of the neighboring chains held together by abundant π-π interactions augmented with hydrogen bonds. The 2D PANI can be readily transferred to various solid surfaces and exhibit interesting electrical and optical properties, suggesting that they would be potentially useful in photoelectronic devices and other applications.
RESUMEN
In this work, we report a facile, clean, controllable and scalable phase engineering technique for monolayer MoS2. We found that weak Ar-plasma bombardment can locally induce 2Hâ1T phase transition in monolayer MoS2 to form mosaic structures. These 2Hâ1T phase transitions are stabilized by point defects (single S-vacancies) and the sizes of induced 1T domains are typically a few nanometers, as revealed by scanning tunneling microscopy measurements. On the basis of a selected-area phase patterning process, we fabricated MoS2 FETs inducing 1T phase transition within the metal contact areas, which exhibit substantially improved device performances. Our results open up a new route for phase engineering in monolayer MoS2 and other transition metal dichalcogenide (TMD) materials.
RESUMEN
Control of the precise lattice alignment of monolayer molybdenum disulfide (MoS2 ) on hexagonal boron nitride (h-BN) is important for both fundamental and applied studies of this heterostructure but remains elusive. The growth of precisely aligned MoS2 domains on the basal plane of h-BN by a low-pressure chemical vapor deposition technique is reported. Only relative rotation angles of 0° or 60° between MoS2 and h-BN basal plane are present. Domains with same orientation stitch and form single-crystal, domains with different orientations stitch and from mirror grain boundaries. In this way, the grain boundary is minimized and a continuous film stitched by these two types of domains with only mirror grain boundaries is obtained. This growth strategy is also applicable to other 2D materials growth.
RESUMEN
MoS2 nanoscrolls are formed by argon plasma treatment on monolayer MoS2 sheet. The nanoscale scroll formation is attributed to the partial removal of top sulfur layer in MoS2 during the argon plasma treatment process. This convenient, solvent-free, and high-yielding nanoscroll formation technique is also feasible for other 2D transition metal dichalcogenides.
RESUMEN
van der Waals (vdW) homo/heterostructures are ideal systems for studying interfacial tribological properties such as structural superlubricity. Previous studies concentrated on the mechanism of translational motion in vdW interfaces. However, detailed mechanisms and general properties of the rotational motion are barely explored. Here, we combine experiments and simulations to reveal the twisting dynamics of the MoS2/graphite heterostructure. Unlike the translational friction falling into the superlubricity regime with no twist angle dependence, the dynamic rotational resistances highly depend on twist angles. Our results show that the periodic rotational resistance force originates from structural potential energy changes during the twisting. The structural potential energy of MoS2/graphite heterostructure increases monotonically from 0° to 30° twist angles, and the estimated relative energy barrier is (1.43 ± 0.36) × 10-3 J/m2. The formation of Moiré superstructures in the graphene layer is the key to controlling the structural potential energy of the MoS2/graphene heterostructure. Our results suggest that in twisting 2D heterostructures, even if the interface sliding friction is negligible, the evolving potential energy change results in a nonvanishing rotational resistance force. The structural change of the heterostructure can be an additional pathway for energy dissipation in the rotational motion, further enhancing the rotational friction force.
RESUMEN
Twist angle between adjacent layers of two-dimensional (2D) layered materials provides an exotic degree of freedom to enable various fascinating phenomena, which opens a research direction-twistronics. To realize the practical applications of twistronics, it is of the utmost importance to control the interlayer twist angle on large scales. In this work, we report the precise control of interlayer twist angle in centimeter-scale stacked multilayer MoS2 homostructures via the combination of wafer-scale highly-oriented monolayer MoS2 growth techniques and a water-assisted transfer method. We confirm that the twist angle can continuously change the indirect bandgap of centimeter-scale stacked multilayer MoS2 homostructures, which is indicated by the photoluminescence peak shift. Furthermore, we demonstrate that the stack structure can affect the electrical properties of MoS2 homostructures, where 30° twist angle yields higher electron mobility. Our work provides a firm basis for the development of twistronics.
RESUMEN
Van der Waals heterostructures of transition metal dichalcogenides with interlayer coupling offer an exotic platform to realize fascinating phenomena. Due to the type II band alignment of these heterostructures, electrons and holes are separated into different layers. The localized electrons induced doping in one layer, in principle, would lift the Fermi level to cross the spin-polarized upper conduction band and lead to strong manipulation of valley magnetic response. Here, we report the significantly enhanced valley Zeeman splitting and magnetic tuning of polarization for the direct optical transition of MoS2 in MoS2/WS2 heterostructures. Such strong enhancement of valley magnetic response in MoS2 stems from the change of the spin-valley degeneracy from 2 to 4 and strong many-body Coulomb interactions induced by ultrafast charge transfer. Moreover, the magnetic splitting can be tuned monotonically by laser power, providing an effective all-optical route towards engineering and manipulating of valleytronic devices and quantum-computation.
RESUMEN
Breaking the space-time symmetries in materials can markedly influence their electronic and optical properties. In 3R-stacked transition metal dichalcogenides, the explicitly broken inversion symmetry enables valley-contrasting Berry curvature and quantization of electronic angular momentum, providing an unprecedented platform for valleytronics. Here, we study the valley coherence of 3R WS2 large single-crystal with thicknesses ranging from monolayer to octalayer at room temperature. Our measurements demonstrate that both A and B excitons possess robust and thickness-independent valley coherence. The valley coherence of direct A (B) excitons can reach 0.742 (0.653) with excitation conditions on resonance with it. Such giant and thickness-independent valley coherence of large single-crystal 3R WS2 at room temperature would provide a firm foundation for quantum manipulation of the valley degree of freedom and practical application of valleytronics.
RESUMEN
Recently, monolayer molybdenum disulphide (MoS2) has emerged as a promising and non-precious electrocatalyst for hydrogen evolution reaction. However, its performance is largely limited by the low density and poor reactivity of active sites within its basal plane. Here, we report that domain boundaries in the basal plane of monolayer MoS2 can greatly enhance its hydrogen evolution reaction performance by serving as active sites. Two types of effective domain boundaries, the 2H-2H domain boundaries and the 2H-1T phase boundaries, were investigated. Superior hydrogen evolution reaction catalytic activity, long-term stability and universality in both acidic and alkaline conditions were achieved based on a multi-hierarchy design of these two types of domain boundaries. We further demonstrate that such superior catalysts are feasible at a large scale by applying this multi-hierarchy design of domain boundaries to wafer-scale monolayer MoS2 films.
RESUMEN
The recent discovery of ferromagnetism in two-dimensional (2D) van der Waals (vdW) materials holds promises for spintronic devices with exceptional properties. However, to use 2D vdW magnets for building spintronic nanodevices such as magnetic memories, key challenges remain in terms of effectively switching the magnetization from one state to the other electrically. Here, we devise a bilayer structure of Fe3GeTe2/Pt, in which the magnetization of few-layered Fe3GeTe2 can be effectively switched by the spin-orbit torques (SOTs) originated from the current flowing in the Pt layer. The effective magnetic fields corresponding to the SOTs are further quantitatively characterized using harmonic measurements. Our demonstration of the SOT-driven magnetization switching in a 2D vdW magnet could pave the way for implementing low-dimensional materials in the next-generation spintronic applications.
RESUMEN
Van der Waals heterostructures stacked from different two-dimensional materials offer a unique platform for addressing many fundamental physics and construction of advanced devices. Twist angle between the two individual layers plays a crucial role in tuning the heterostructure properties. Here we report the experimental investigation of the twist angle-dependent conductivities in MoS2/graphene van der Waals heterojunctions. We found that the vertical conductivity of the heterojunction can be tuned by â¼5 times under different twist configurations, and the highest/lowest conductivity occurs at a twist angle of 0°/30°. Density functional theory simulations suggest that this conductivity change originates from the transmission coefficient difference in the heterojunctions with different twist angles. Our work provides a guidance in using the MoS2/graphene heterojunction for electronics, especially on reducing the contact resistance in MoS2 devices as well as other TMDCs devices contacted by graphene.
RESUMEN
Recently, 2D materials exhibit great potential for humidity sensing applications due to the fact that almost all atoms are at the surface. Therefore, the quality of the material surface becomes the key point for sensitive perception. This study reports an integrated, highly sensitive humidity sensors array based on large-area, uniform single-layer molybdenum disulfide with an ultraclean surface. Device mobilities and on/off ratios decrease linearly with the relative humidity varying from 0% to 35%, leading to a high sensitivity of more than 104 . The reversible water physisorption process leads to short response and decay times. In addition, the device array on a flexible substrate shows stable performance, suggesting great potential in future noncontact interface localization applications.
RESUMEN
2D semiconductors are promising channel materials for field-effect transistors (FETs) with potentially strong immunity to short-channel effects (SCEs). In this paper, a grain boundary widening technique is developed to fabricate graphene electrodes for contacting monolayer MoS2 . FETs with channel lengths scaling down to ≈4 nm can be realized reliably. These graphene-contacted ultrashort channel MoS2 FETs exhibit superior performances including the nearly Ohmic contacts and excellent immunity to SCEs. This work provides a facile route toward the fabrication of various 2D material-based devices for ultrascaled electronics.
RESUMEN
Large scale epitaxial growth and transfer of monolayer MoS2 has attracted great attention in recent years. Here, we report the wafer-scale epitaxial growth of highly oriented continuous and uniform monolayer MoS2 films on single-crystalline sapphire wafers by chemical vapor deposition (CVD) method. The epitaxial film is of high quality and stitched by many 0°, 60° domains and 60°-domain boundaries. Moreover, such wafer-scale monolayer MoS2 films can be transferred and stacked by a simple stamp-transfer process, and the substrate is reusable for subsequent growth. Our progress would facilitate the scalable fabrication of various electronic, valleytronic, and optoelectronic devices for practical applications.
RESUMEN
The performance of two-dimensional (2D) MoS2 devices depends largely on the quality of the MoS2 itself. Existing fabrication process for 2D MoS2 relies on lithography and etching. However, it is extremely difficult to achieve clean patterns without any contaminations or passivations. Here we report a peel-off pattering of MoS2 films on substrates based on a proper interface engineering. The peel-off process utilizes the strong adhesion between gold and MoS2 and removes the MoS2 film contact with gold directly, leading to clean MoS2 pattern generation without residuals. Significantly improved electrical performances including high mobility â¼17.1 ± 8.3 cm(2)/(V s) and on/off ratio â¼5.6 ± 3.6 × 10(6) were achieved. Such clean fabrication technique paves a way to high quality MoS2 devices for various electrical and optical applications.