Self-assembly of graphene oxide flakes for smart and multifunctional coating with reversible formation of wrinkling patterns.

One of the main purposes of smart and multifunctional coatings is to have the versatility to be applied in a wide range of applications. However, the functions of smart materials are often highly limited. In particular, the stimuli-responsive lateral expansion of coatings based on 2D materials has not been reported before. This manuscript describes small two-dimensional graphene oxide (GO) flakes (e.g., thin sheets with a thickness of a few nanometers and much larger lateral dimensions) that act as elementary agents for the formation of smart and multifunctional coatings. The coating can be self-assembled from the GO flakes and disassembled flexibly when required. The coating is stimuli-responsive: upon localized contact with water, it expands and forms wrinkling patterns throughout its whole surface. Evaporating the water allows the wrinkles to disappear; hence, the process is reversible. This stimuli-responsiveness can be controlled to be reduced or completely switched off by temperature or pressure. These features are fundamentally due to the reversible intermolecular interactions among the flakes and favorable packing structure of the coating. The smart coating is shown to be useful for patterned fluidic systems of the desired shapes and the development of channels between fluidic reservoirs via the shortest path. Importantly, these results showed that a simple collection of uniquely 2D elementary agents with small nanoscale thickness can self-assemble into macroscopic materials that perform interactive and multifunctional operations.

Charging Organic Liquids by Static Charge.

Aqueous liquids can be charged effectively by a number of methods for many important applications. Organic liquids, however, cannot be charged effectively by existing methods due to their low conductivities, especially the insulating nonpolar organic liquids; hence, there has not been any significant application developed based on charged organic liquids. This study describes an effective fundamental strategy for charging organic liquids, including nonpolar organic liquids: static charge is simply mixed into the liquid. Analyses suggested that the charged species are molecular ions that reside in the bulk of the liquid after charging. This method is simple and general, and the amount and polarity of charge can be flexibly tunable. The effectiveness of this method gives rise to opportunities for the development of novel applications. Charged organic droplets are manipulated for the first time by an electric field for controlling organic reactions. Particles with charge embedded in their bulk matrices are fabricated for the first time (i.e., via polymerizing the liquid monomers mixed with static charge). The charge in this novel class of bulk-charged particles is stable and permanent, especially when compared to the typical surface-charged particles. Simultaneous bulk-charged and bulk-magnetic particles are fabricated for the first time via simply mixing both the static charge and magnetic nanoparticles into the liquid monomers. These highly versatile particles are responsive to both electric and magnetic fields for practical applications.

Influence of High-Intensity Focused Ultrasound (HIFU) Ablation on Arteries: Ex Vivo Studies.

High-intensity focused ultrasound (HIFU) has been used to ablate solid tumors and cancers. Because of the hypervascular structure of the tumor and circulating blood inside it, the interaction between the HIFU burst and vessel is a critical issue in the clinical environment. Influences on lesion production and the potential of vessel rupture were investigated in this study for the efficiency and safety of clinical ablation. An extracted porcine artery was embedded in a transparent polyacrylamide gel phantom, with bovine serum albumin (BSA) as an indicator of the thermal lesion, and degassed water was driven through the artery sample. The HIFU focus was aligned to the anterior wall, middle of the artery, and posterior wall. After HIFU ablation, the produced lesion was photographically recorded, and then its size was quantified and compared with that in the gel phantom without artery. In addition, the bubble dynamics (i.e., generation, expansion, motion, and shrinkage of bubbles and their interaction with the artery) were captured using high-speed imaging. It was found that the presence of the artery resulted in a decrease in lesion size in both the axial and lateral directions. The characteristics of the lesion are dependent on the focus alignment. Acoustic and hydrodynamic cavitation play important roles in lesion production and interaction with the artery. Both thermal and mechanical effects were found on the surface of the artery wall after HIFU ablation. However, no vessel rupture was found in this ex vivo study.

Performing calculus: Asymmetric adaptive stimuli-responsive material for derivative control.

Materials (e.g., brick or wood) are generally perceived as unintelligent. Even the highly researched "smart" materials are only capable of extremely primitive analytical functions (e.g., simple logical operations). Here, a material is shown to have the ability to perform (i.e., without a computer), an advanced mathematical operation in calculus: the temporal derivative. It consists of a stimuli-responsive material coated asymmetrically with an adaptive impermeable layer. Its ability to analyze the derivative is shown by experiments, numerical modeling, and theory (i.e., scaling between derivative and response). This class of freestanding stimuli-responsive materials is demonstrated to serve effectively as a derivative controller for controlled delivery and self-regulation. Its fast response realizes the same designed functionality and efficiency as complex industrial derivative controllers widely used in manufacturing. These results illustrate the possibility to associate specifically designed materials directly with higher concepts of mathematics for the development of "intelligent" material-based systems.

Spinning Liquid Marble and Its Dual Applications as Microcentrifuge and Miniature Localized Viscometer.

Liquid marble offers an attractive droplet manipulation approach by isolating microdroplet in a nonstick encapsulating shell formed via the spontaneous coating of hydrophobic particles onto the liquid surface. While liquid marble prepared using magnetic nanoparticles enables precise spatiotemporal actuation of microdroplets, these manipulations are generally limited to simple and linear spatial maneuver of microdroplets. Herein, we demonstrate the unique and three-dimensional spinning of microliter-sized liquid marble (LM) and its subsequent dual applications as (1) the world's smallest centrifuge and (2) a miniature and localized viscometer. Our LM is responsive to an applied rotating magnetic field, with its spinning speed programmable between 0 and 1300 rpm. This spinning generates an unprecedented centrifugal force of >2g in a LM of ∼1 mm radius. Such centrifugal force facilitates an outward and radial hydrodynamic flow in the enclosed microdroplet, enabling LM to serve as a microcentrifuge for the sedimentation of nanoparticles with >85% separation efficiency. Furthermore, we apply spinning LM as an ultrasensitive spin-to-viscosity transducer to quantify the viscosity of the external suspended liquid in the relative viscosity (η/ηwater) range of 1-70 using ≤1 mL liquid sample. Collectively, the ensemble of benefits offered by spinning LM creates enormous opportunities in the development of multifunctional micromagneto-mechanical devices as promising surface-sensitive microsensor, miniature centrifugal pump, and even microreactor with directed heat and mass transfer mechanism.