Detecting Mycobacterium tuberculosis complex and rifampicin resistance via a new rapid multienzyme isothermal point mutation assay.

Simple, rapid, and accurate detection of the Mycobacterium tuberculosis complex (MTBC) and drug resistance is critical for improving patient care and decreasing the spread of tuberculosis. To this end, we have developed a new simple and rapid molecular method, which combines multienzyme isothermal rapid amplification and a lateral flow strip, to detect MTBC and simultaneously detect rifampin (RIF) resistance. Our findings showed that it has sufficient sensitivity and specificity for discriminating 118 MTBC strains from 51 non-tuberculosis mycobacteria strains and 11 of the most common respiratory tract bacteria. Further, compared to drug susceptibility testing, the assay has a sensitivity, specificity, and accuracy of 54.1%, 100.0%, and 75.2%, respectively, for detection of RIF resistance. Some of the advantages of this assay are that no special instrumentation is required, a constant low temperature of 39 °C is sufficient for the reaction, the turnaround time is less than 20 min from the start of the reaction to read out and the result can be seen with the naked eye and does not require specialized training. These characteristics of the new assay make it particularly useful for detecting MTBC and RIF resistance in resource-limited settings.

Different Contributions of embB and ubiA Mutations to Variable Level of Ethambutol Resistance in Mycobacterium tuberculosis Isolates.

Objective: To explore the association between the variant mutations within embB and ubiA, and the degree of ethambutol (EMB) resistance of Mycobacterium tuberculosis (M. tuberculosis) isolates. Methods: A total of 146 M. tuberculosis isolates were used to determine the minimum inhibitory concentrations (MICs) of EMB with a 96-well microplate-based assay. The mutations within embB and ubiA among these isolates were identified with DNA sequencing. Moreover, a multivariate regression model and a computer model were established to assess the effects of mutations on EMB resistance. Results: Our data showed that overall 100 isolates exhibited 28 mutated patterns within the sequenced embB and ubiA. Statistical analysis indicated that embB mutations Met306Val, Met306Ile, Gly406Ala, and Gln497Arg, were strongly associated with EMB resistance. Of these mutations, Met306Val and Gln497Arg were significantly associated with high-level EMB resistance. Almost all multiple mutations occurred in high-level EMB-resistant isolates. Although the mutation within ubiA accompanied with embB mutation presented exclusively in EMB-resistant isolates, four single ubiA mutations (Ala39Glu, Ser173Ala, Trp175Cys, and Val283Leu) leading to protein instability were observed in EMB-susceptible isolates. Conclusion: This study highlighted the complexity of EMB resistance. Some individual mutations and multiple mutations within embB and ubiA contributed to the different levels of EMB resistance.

Rapid detection of fluoroquinolone resistance in Mycobacterium tuberculosis using a novel multienzyme isothermal rapid assay.

Simple, rapid, and accurate detection of Fluoroquinolone (FQ) resistance is essential for early initiation of appropriate anti-tuberculosis treatment regimen among rifampicin-resistant tuberculosis (RR-TB). In this study, we developed a new assay, which combines multienzyme isothermal rapid amplification and a lateral flow strip (MIRA-LF), to identify the mutations on codons 90 and 94 of gyrA for detecting levofloxacin (LFX) resistance. Compared to conventional phenotypic drug susceptibility testing, the new assay detected fluoroquinolone resistance with a sensitivity, specificity, and accuracy of 92.4%, 98.5%, and 96.5%, respectively. Thus, these characteristics of the newly developed MIRA-LF assay make it particularly useful and accurate for detecting FQ resistance in Mycobacterium tuberculosis in resource-limited condition.

rpoB Mutations are Associated with Variable Levels of Rifampin and Rifabutin Resistance in Mycobacterium tuberculosis.

Objective: To assess the relationship between the variant rpoB mutations and the degree of rifampin (RIF)/rifabutin (RFB) resistance in Mycobacterium tuberculosis (M. tuberculosis). Methods: We analyzed the whole rpoB gene in 177 M. tuberculosis clinical isolates and quantified their minimum inhibitory concentrations (MICs) using microplate-based assays. Results: The results revealed that of the 177 isolates, 116 were resistant to both RIF and RFB. There were 38 mutated patterns within the sequenced whole rpoB gene of the 120 isolates. Statistical analysis indicated that mutations, S450L, H445D, H445Y, and H445R, were associated with RIF and RFB resistance. Of these mutations, S450L, H445D, and H445Y were associated with high-level RIF and RFB MIC. H445R was associated with high-level RIF MIC, but not high-level RFB MIC. D435V and L452P were associated with only RIF, but not RFB resistance. Q432K and Q432L were associated with high-level RFB MIC. Several single mutations without statistical association with rifamycin resistance, such as V170F, occurred exclusively in low-level RIF but high-level RFB resistant isolates. Additionally, although cross-resistance to RIF and RFB is common, 21 RIF-resistant/RFB-susceptible isolates were identified. Conclusion: This study highlighted the complexity of rifamycin resistance. Identification of the rpoB polymorphism will be helpful to diagnose the RIF-resistant tuberculosis that has the potential to benefit from a treatment regimen including RFB.

Crystal structure of DNA polymerase III ß sliding clamp from Mycobacterium tuberculosis.

The sliding clamp is a key component of DNA polymerase III (Pol III) required for genome replication. It is known to function with diverse DNA repair proteins and cell cycle-control proteins, making it a potential drug target. To extend our understanding of the structure/function relationship of the sliding clamp, we solved the crystal structure of the sliding clamp from Mycobacterium tuberculosis (M. tuberculosis), a human pathogen that causes most cases of tuberculosis (TB). The sliding clamp from M. tuberculosis forms a ring-shaped head-to-tail dimer with three domains per subunit. Each domain contains two α helices in the inner ring that lie against two ß sheets in the outer ring. Previous studies have indicated that many Escherichia coli clamp-binding proteins have a conserved LF sequence, which is critical for binding to the hydrophobic region of the sliding clamp. Here, we analyzed the binding affinities of the M. tuberculosis sliding clamp and peptides derived from the α and δ subunits of Pol III, which indicated that the LF motif also plays an important role in the binding of the α and δ subunits to the sliding clamp of M. tuberculosis.

rpoB Mutations and Effects on Rifampin Resistance in Mycobacterium tuberculosis.

OBJECTIVE: To investigate the mutations within the whole rpoB gene of Mycobacterium tuberculosis and analyze their effects on rifampin (RIF) resistance based on crystal structure. METHODS: We sequenced the entire rpoB gene in 175 tuberculosis isolates and quantified their minimum inhibitory concentrations using microplate-based assays. Additionally, the structural interactions between wild-type/mutant RpoB and RIF were also analyzed. RESULTS: Results revealed that a total of 34 mutations distributed across 17 different sites within the whole rpoB gene were identified. Of the 34 mutations, 25 could alter the structural interaction between RpoB and RIF and contribute to RIF resistance. Statistical analysis showed that S450L, H445D, H445Y and H445R mutations were associated with high-level RIF resistance, while D435V was associated with moderate-level RIF resistance. CONCLUSION: Some mutations within the rpoB gene could affect the interaction between RpoB and RIF and thus are associated with RIF resistance. These findings could be helpful to design new antibiotics and develop novel diagnostic tools for drug resistance in TB.

Detecting Ethambutol Resistance in Mycobacterium tuberculosis Isolates in China: A Comparison Between Phenotypic Drug Susceptibility Testing Methods and DNA Sequencing of embAB.

With the increasing incidence of drug-resistant tuberculosis (DR-TB), determining a rapid and accurate drug susceptibility testing (DST) method to identify ethambutol (EMB) resistance in Mycobacterium tuberculosis has become essential for patient management in China. Herein, we evaluated the correlation between three phenotypic DST methods, namely, proportion method (PM), MGIT 960 system, and microplate alamar Blue assay (MABA), and DNA sequencing of embAB in 118 M. tuberculosis isolates from China. When the results of the phenotypic DST methods were compared with those of DNA sequencing, the overall agreement and kappa values of the PM, MGIT 960 system, and MABA were 81.4% and 0.61, 77.1% and 0.55, and 84.7% and 0.67, respectively. The agreement for EMB resistance between MABA and PM was significantly higher than that between the MGIT 960 system and PM (P = 0.02). Moreover, among the isolates with detectable embAB mutations, 97.2% (70/72 isolates) harbored mutations in embB. The analysis of embB mutations predicted EMB resistance with 81.3% sensitivity, 86.8% specificity, and 83.1% accuracy. Thus, MABA may be a better phenotypic DST method for detecting EMB resistance. DNA sequencing of embB may be useful for the early identification of EMB resistance and the consequent optimization of the treatment regimen.

A simplified method for reconstituting active E. coli DNA polymerase III.

Genome duplication in E. coli is carried out by DNA polymerase III, an enzyme complex consisting of ten subunits. Investigations of the biochemical and structural properties of DNA polymerase III require the expression and purification of subunits including α, ge, θ, γ, δ', δ, and ß separately followed by in vitro reconstitution of the pol III core and clamp loader. Here we propose a new method for expressing and purifying DNA polymerase III components by utilizing a protein co-expression strategy. Our results show that the subunits of the pol III core and those of the clamp loader can be coexpressed and purified based on inherent interactions between the subunits. The resulting pol III core, clamp loader and sliding clamp can be reconstituted effectively to perform DNA polymerization. Our strategy considerably simplifies the expression and purification of DNA polymerase III and provides a feasible and convenient method for exploring other multi-subunit systems.