Equal-intensity beam splitter realization by wire grid polarizers for passive laser speckle reduction.

A method to realize an equal-intensity beam splitter (EIBS) using wire grid polarizers (WGPs) is proposed. The EIBS consists of WGPs with predetermined orientations and high-reflectivity mirrors. We demonstrated the generation of three laser sub-beams (LSBs) with equivalent intensities using EIBS. The three LSBs were incoherent by introducing optical path differences larger than the laser coherence length. The LSBs were used to reduce speckle passively, where the objective speckle contrast was reduced from 0.82 to 0.5 when all three LSBs were used. The feasibility of EIBS in speckle reduction was studied using a simplified laser projection system. The structure of the EIBS implemented by WGPs is simpler than EIBSs obtained by other methods.

Plasmonic Cu Nanoparticles for the Low-temperature Photo-driven Water-gas Shift Reaction.

The activation of water molecules in thermal catalysis typically requires high temperatures, representing an obstacle to catalyst development for the low-temperature water-gas shift reaction (WGSR). Plasmonic photocatalysis allows activation of water at low temperatures through the generation of light-induced hot electrons. Herein, we report a layered double hydroxide-derived copper catalyst (LD-Cu) with outstanding performance for the low-temperature photo-driven WGSR. LD-Cu offered a lower activation energy for WGSR to H2 under UV/Vis irradiation (1.4 W cm-2 ) compared to under dark conditions. Detailed experimental studies revealed that highly dispersed Cu nanoparticles created an abundance of hot electrons during light absorption, which promoted *H2 O dissociation and *H combination via a carboxyl pathway, leading to the efficient production of H2 . Results demonstrate the benefits of exploiting plasmonic phenomena in the development of photo-driven low-temperature WGSR catalysts.

Protrusion-Rich Cu@NiRu Core@shell Nanotubes for Efficient Alkaline Hydrogen Evolution Electrocatalysis.

The development of highly efficient and durable water electrolysis catalysts plays an important role in the large-scale applications of hydrogen energy. In this work, protrusion-rich Cu@NiRu core@shell nanotubes are prepared by a facile wet chemistry method and used for catalyzing hydrogen evolution reaction (HER) in an alkaline environment. The protrusion-like RuNi alloy shells with accessible channels and abundant defects possess a large surface area and can optimize the surface electronic structure through the electron transfer from Ni to Ru. Moreover, the unique 1D hollow structure can effectively stabilize RuNi alloy shell through preventing the aggregation of nanoparticles. The synthesized catalyst can achieve a current density of 10 mA cm-2 in 1.0 m KOH with an overpotential of only 22 mV and show excellent stability after 5000 cycles, which is superior to most reported Ru-based catalysts. Density functional theory calculations illustrate that the weakened hydrogen adsorption on Ru sites induced by the alloying with Ni and active electron transfer between Ru and Ni/Cu are the keys to the much improved HER activity.

Csp3-Csp3 Bond-Forming Reductive Elimination from Well-Defined Copper(III) Complexes.

Carbon-carbon bond-forming reductive elimination from elusive organocopper(III) complexes has been considered the key step in many copper-catalyzed and organocuprate reactions. However, organocopper(III) complexes with well-defined structures that can undergo reductive elimination are extremely rare, especially for the formation of Csp3-Csp3 bonds. We report herein a general method for the synthesis of a series of [alkyl-CuIII-(CF3)3]- complexes, the structures of which have been unequivocally characterized by NMR spectroscopy, mass spectrometry, and X-ray crystal diffraction. At elevated temperature, these complexes undergo reductive elimination following first-order kinetics, forming alkyl-CF3 products with good yields (up to 91%). Both kinetic studies and DFT calculations indicate that the reductive elimination to form Csp3-CF3 bonds proceeds through a concerted transition state, with a Δ H⧧ = 20 kcal/mol barrier.

Suppression by Pt of CO adsorption and dissociation and methane formation on Fe5C2(100) surfaces.

To understand the chemical origin of platinum promotion effects on iron based Fischer-Tropsch synthesis catalysts, the effects of Pt on CO adsorption and dissociation as well as surface carbon hydrogenation on the Fe5C2(100) facet with different surface C* contents have been studied using the spin-polarized density functional theory method. CO dissociation initiating from diverse sites was calculated through both direct and H-assisted pathways via the CHO intermediate. On the perfect (100) surface, CO can hardly dissociate, and the surface carbon can be facially hydrogenated to CH4. On the C*-defect and C*-free (100) surfaces, CO can strongly adsorb on the C* vacant sites and direct dissociation is favored to occur. The activity is higher with the decrease of the surface carbon content. When platinum atoms are added on the surfaces, the C*-vacancies have a higher activity for CO dissociation than the new sites generated by Pt adsorption. However, both the CO dissociation and the surface carbon consumption through CH4 formation are hindered. The evolution of surface carbon is predicted to be suppressed by the addition of Pt on the Fe5C2(100) surface.

Tuning Gold Nanoparticles with Chelating Ligands for Highly Efficient Electrocatalytic CO2 Reduction.

Capped chelating organic molecules are presented as a design principle for tuning heterogeneous nanoparticles for electrochemical catalysis. Gold nanoparticles (AuNPs) functionalized with a chelating tetradentate porphyrin ligand show a 110-fold enhancement compared to the oleylamine-coated AuNP in current density for electrochemical reduction of CO2 to CO in water at an overpotential of 340 mV with Faradaic efficiencies (FEs) of 93 %. These catalysts also show excellent stability without deactivation (<5 % productivity loss) within 72 hours of electrolysis. DFT calculation results further confirm the chelation effect in stabilizing molecule/NP interface and tailoring catalytic activity. This general approach is thus anticipated to be complementary to current NP catalyst design approaches.

Oxide-Modified Nickel Photocatalysts for the Production of Hydrocarbons in Visible Light.

Metallic nickel nanostructures that were partially decorated by discrete nickel oxide layers were fabricated by in situ reduction of calcinated Ni-containing layered double hydroxide nanosheets, the structure of which was confirmed by extended X-ray absorption fine structure spectroscopy, X-ray photoelectron spectroscopy, and transmission electron microscopy. The existence of the abundant interfaces between the surface Ni oxide overlayer and metallic Ni altered the geometric/electronic structure of the Ni nanoparticles, making them apt for CO activation under light irradiation. Most importantly, the unique structure favors the C-C coupling reaction on its surface, which confers the catalyst unexpected reaction power towards higher hydrocarbons at moderate reaction conditions. This study leads to a green and sustainable approach for the photocatalytic production of highly valuable chemical fuels.

MFA-UNet: a vessel segmentation method based on multi-scale feature fusion and attention module.

Introduction: The accurate segmentation of retinal vessels is of utmost importance in the diagnosis of retinal diseases. However, the complex vessel structure often leads to poor segmentation performance, particularly in the case of microvessels. Methods: To address this issue, we propose a vessel segmentation method composed of preprocessing and a multi-scale feature attention network (MFA-UNet). The preprocessing stage involves the application of gamma correction and contrast-limited adaptive histogram equalization to enhance image intensity and vessel contrast. The MFA-UNet incorporates the Multi-scale Fusion Self-Attention Module(MSAM) that adjusts multi-scale features and establishes global dependencies, enabling the network to better preserve microvascular structures. Furthermore, the multi-branch decoding module based on deep supervision (MBDM) replaces the original output layer to achieve targeted segmentation of macrovessels and microvessels. Additionally, a parallel attention mechanism is embedded into the decoder to better exploit multi-scale features in skip paths. Results: The proposed MFA-UNet yields competitive performance, with dice scores of 82.79/83.51/84.17/78.60/81.75/84.04 and accuracies of 95.71/96.4/96.71/96.81/96.32/97.10 on the DRIVE, STARE, CHASEDB1, HRF, IOSTAR and FIVES datasets, respectively. Discussion: It is expected to provide reliable segmentation results in clinical diagnosis.

Ruthenium-cobalt single atom alloy for CO photo-hydrogenation to liquid fuels at ambient pressures.

Photothermal Fischer-Tropsch synthesis represents a promising strategy for converting carbon monoxide into value-added chemicals. High pressures (2-5 MPa) are typically required for efficient C-C coupling reactions and the production of C5+ liquid fuels. Herein, we report a ruthenium-cobalt single atom alloy (Ru1Co-SAA) catalyst derived from a layered-double-hydroxide nanosheet precursor. Under UV-Vis irradiation (1.80 W cm-2), Ru1Co-SAA heats to 200 °C and photo-hydrogenates CO to C5+ liquid fuels at ambient pressures (0.1-0.5 MPa). Single atom Ru sites dramatically enhance the dissociative adsorption of CO, whilst promoting C-C coupling reactions and suppressing over-hydrogenation of CHx* intermediates, resulting in a CO photo-hydrogenation turnover frequency of 0.114 s-1 with 75.8% C5+ selectivity. Owing to the local Ru-Co coordination, highly unsaturated intermediates are generated during C-C coupling reactions, thereby improving the probability of carbon chain growth into C5+ liquid fuels. The findings open new vistas towards C5+ liquid fuels under sunlight at mild pressures.

Atomically dispersed Zn-Co-N-C catalyst boosting efficient and robust oxygen reduction catalysis in acid via stabilizing Co-N bonds.

Transition metal supported N-doped carbon (M-N-C) catalysts for oxygen reduction reaction (ORR) are viewed as the promising candidate to replace Pt-group metal (PGM) for proton exchange membrane fuel cells (PEMFCs). However, the stability of M-N-C is extremely challenging due to the demetalation, H2O2 attack, etc. in the strongly oxidative conditions of PEMFCs. In this study, we demonstrate the universal effect of Zn on promoting the stability of atomically dispersed M-Nx/C (M = Co, Fe, Mn) catalysts and the enhancement mechanism is unveiled for the first time. The best-performing dual-metal-site Zn-Co-N-C catalyst exhibits a high half-wave potential (E 1/2) value of 0.81 V vs. reversible hydrogen electrode (RHE) in acid and outstanding durability with no activity decay after 15,000 accelerated degradation test (ADT) cycles at 60 °C, surpassing most reported Co-based PGM-free catalysts in acid media. For comparison, the Co-N-C in the absence of Zn suffers from a rapid degradation after ADT due to the demetalation and higher H2O2 yield. X-ray adsorption spectroscopy (XAS) and density functional theory (DFT) calculations suggest the more negative formation energy (by 1.2 eV) and increased charge transfer of Zn-Co dual-site structure compared to Co-N-C could strength the Co-N bonds against the demetalation and the optimized d-band center accounts for the improved ORR kinetics.

Electrophysiological and Behavioral Responses of Apis mellifera and Bombusterrestris to Melon Flower Volatiles.

As important pollinators, honeybees and bumblebees present a pollination behavior that is influenced by flower volatiles through the olfactory system. In this study, volatile compounds from melon flowers were isolated and identified by headspace solid-phase microextraction (HS-SPME) and gas chromatography-mass spectrometry (GC-MS), and their effects on Apis mellifera and Bombus terrestris were investigated by electroantennogram (EAG) and behavior tests (Y-tube olfactometer). The results showed that 77 volatile compounds were detected in melon flowers, among which the relative content of aldehydes was the highest (61.34%; 82.09%). A. mellifera showed a strong EAG response to e-2-hexenal, e-2-octenal, and 1-nonanal. B. terrestris showed a strong EAG response to e-2-hexenal, e-2-octenal, 2,5-dimethyl-benzaldehyde, benzaldehyde and benzenepropanal. In behavior tests, the volatiles with the highest attractive rate to A. mellifera were e-2-hexenal (200 µg/µL, 33.33%) and e-2-octenal (300 µg/µL, 33.33%), and those to B. terrestris were e-2-hexenal (10 µg/µL, 53.33%) and 2,5-dimethyl-benzaldehyde (100 µg/µL, 43.33%). E-2-hexenal and e-2-octenal were more attractive to A. mellifera than B. terrestris, respectively (10 µg/µL, 10 µg/µL, 200 µg/µL). In conclusion, the volatiles of melon flowers in facilities have certain effects on the electrophysiology and behavior of bees, which is expected to provide theoretical and technical support for the pollination of A. mellifera and B. terrestris in facilities.

Differences in EAG Response and Behavioral Choices between Honey Bee and Bumble Bee to Tomato Flower Volatiles.

Bumble bees and honey bees are of vital importance for tomato pollination, although honey bees are less attracted to tomato flowers than bumble bees. Little is known about how tomato flower volatile compounds influence the foraging behaviors of honey bees and bumble bees. In this study, compounds of tomato flower volatiles were detected by gas chromatography-mass spectrometry. Electroantennography (EAG) and a dynamic two-choice olfactometer were used, respectively, to compare the differences of antennal and behavioral responses between Apis mellifera and Bombus terrestris towards selected volatile compounds. A total of 46 compounds were detected from the tomato flower volatiles. Of the 16 compounds tested, A. mellifera showed strong antennal responses to 3 compounds (1-nonanal, (+)-dihydrocarvone, and toluene) when compared with a mineral oil control, and B. terrestris showed 7 pronounced EAG responses (1,3-xylene, (+)-dihydrocarvone, toluene, piperitone, eucarvone, 1-nonanal, and ß-ocimene). Additionally, 1-nonanal and (+)-dihydrocarvone elicited significant avoidance behavior of A. mellifera, but not of B. terrestris. In conclusion, bumble bees are more sensitive to the compounds of tomato flower volatiles compared to honey bees, and honey bees showed aversion to some compounds of tomato flower volatiles. The findings indicated that compounds of flower volatiles significantly influenced bee foraging preference for tomato.

The Transcriptomic Landscape of Molecular Effects after Sublethal Exposure to Dinotefuran on Apis mellifera.

The decreasing number of bees is a global ecological problem. With the advancement of agricultural modernisation, the large-scale use of neonicotinoid insecticides is one of the main factors leading to the decline of bees. The aim of the present study was to investigate the effect and the mechanisms underlying bees impaired by dinotefuran. Acute (48 h) oral toxicity tests showed that a 5% lethal concentration (LC5) was 0.220 mg/L, and a 20% lethal concentration (LC20) was 0.458 mg/L. The gene expression profile shows that when compared with the control group, the LC5 group induced 206 significantly upregulated, differentially expressed genes (DEGs) and 363 significantly downregulated DEGs, while the LC20 group induced 180 significantly upregulated DEGs and 419 significantly downregulated DEGs. Significantly, transcriptomic analysis revealed DEGs involved in immunity, detoxification, and the nervous system, such as antimicrobial peptides, vitellogenin, synaptotagmin-10, AChE-2, and nAChRa9. Furthermore, Gene Ontology (GO) annotation and Kyoto Encyclopaedia of Genes and Genomes (KEGG) pathway analysis revealed that DEGs were enriched in amino acid and fatty acid biosynthesis and metabolism pathways. Collectively, our findings will help clarify the deleterious physiological and behavioural impacts of dinotefuran on bees and provide a basis for future research on the mechanisms underlying bees impaired by dinotefuran.

Titania-Supported Ni2 P/Ni Catalysts for Selective Solar-Driven CO Hydrogenation.

Solar-driven Fischer-Tropsch synthesis (FTS) holds great potential for the sustainable production of fuels from syngas and solar energy. However, the selectivity toward multi-carbon products (C2+ ) is often hampered by the difficulty in the regulation of transition metals acting as both light absorption units and active sites. Herein, a partial phosphidation strategy to prepare titania supported Ni2 P/Ni catalysts for photothermal FTS is demonstrated. Under Xenon lamp or concentrated sunlight irradiation, the optimized catalyst shows a C2+ selectivity of 70% at a CO conversion of >20%. Conversely, nickel metal in the absence of Ni2 P delivers negligible C2+ products (≈1%) with methane being the major product (>90%). Structural characterization and density functional theory calculation reveal that the partial phosphidation allows exposed metallic Ni to be active for CO adsorption and activation, while the existence of Ni2 P/Ni interface is responsible to inhibit CO methanation and promote C-C coupling of adsorbed *CH intermediates. This work introduces a novel phosphidation strategy for nickel-based photothermal catalysts in efficiently harnessing solar energy, and regulating the reaction pathways for CO hydrogenation to deliver high value products.

Reversing sintering effect of Ni particles on γ-Mo2N via strong metal support interaction.

Reversing the thermal induced sintering phenomenon and forming high temperature stable fine dispersed metallic centers with unique structural and electronic properties is one of the ever-lasting targets of heterogeneous catalysis. Here we report that the dispersion of metallic Ni particles into under-coordinated two-dimensional Ni clusters over γ-Mo2N is a thermodynamically favorable process based on the AIMD simulation. A Ni-4nm/γ-Mo2N model catalyst is synthesized and used to further study the reverse sintering effect by the combination of multiple in-situ characterization methods, including in-situ quick XANES and EXAFS, ambient pressure XPS and environmental SE/STEM etc. The under-coordinated two-dimensional layered Ni clusters on molybdenum nitride support generated from the Ni-4nm/γ-Mo2N has been demonstrated to be a thermally stable catalyst in 50 h stability test in CO2 hydrogenation, and exhibits a remarkable catalytic selectivity reverse compared with traditional Ni particles-based catalyst, leading to a chemo-specific CO2 hydrogenation to CO.

Insight into the magnetic moment of iron borides: theoretical consideration from the local coordinative and electronic environment.

Experimentally observed magnetic properties are usually statistically averaged from bulk materials and information associated with the local chemical environment cannot be specified. Against this backdrop, we propose a theoretical strategy to provide an in-depth understanding of the multi-role for metrics that may contribute to the apparent magnetic moment of iron borides. In particular, we demonstrate this strategy through systematic manipulation of the iron/boron stoichiometry of six prototype iron borides to tune their associated local structural and electronic environment to further modulate the resultant magnetic moment. The local coordinative structures of the six iron borides were resolved utilizing bond valence analysis by taking the different coordination shells into account. Furthermore, the local electronic properties of each Fe atom in these iron borides, such as charge transfer, electronic distribution, bonding feature and orbital energy level, were carefully analyzed by Bader analysis, density of states analysis and Crystal Orbital Hamilton Population analysis. From the combination of analyses of both the coordinative and electronic properties of the prototype iron borides, a linear relationship between the local magnetic moment and the bond valence as well as the average energy of the Fe 3d orbitals has been confirmed.

Inverse ZrO2/Cu as a highly efficient methanol synthesis catalyst from CO2 hydrogenation.

Enhancing the intrinsic activity and space time yield of Cu based heterogeneous methanol synthesis catalysts through CO2 hydrogenation is one of the major topics in CO2 conversion into value-added liquid fuels and chemicals. Here we report inverse ZrO2/Cu catalysts with a tunable Zr/Cu ratio have been prepared via an oxalate co-precipitation method, showing excellent performance for CO2 hydrogenation to methanol. Under optimal condition, the catalyst composed by 10% of ZrO2 supported over 90% of Cu exhibits the highest mass-specific methanol formation rate of 524 gMeOHkgcat-1h-1 at 220 °C, 3.3 times higher than the activity of traditional Cu/ZrO2 catalysts (159 gMeOHkgcat-1h-1). In situ XRD-PDF, XAFS and AP-XPS structural studies reveal that the inverse ZrO2/Cu catalysts are composed of islands of partially reduced 1-2 nm amorphous ZrO2 supported over metallic Cu particles. The ZrO2 islands are highly active for the CO2 activation. Meanwhile, an intermediate of formate adsorbed on the Cu at 1350 cm-1 is discovered by the in situ DRIFTS. This formate intermediate exhibits fast hydrogenation conversion to methoxy. The activation of CO2 and hydrogenation of all the surface oxygenate intermediates are significantly accelerated over the inverse ZrO2/Cu configuration, accounting for the excellent methanol formation activity observed.

An electronic structure governed by the displacement of the indium site in In-S6 octahedra: LnOInS2 (Ln = La, Ce, and Pr).

An extremely large displacement of the indium site in In-S6 octahedra in LnOInS2 (Ln = La, Ce, and Pr) was found in synchrotron X-ray diffraction. LaOInS2 with off-center indium in In-S6 octahedra exhibited a wider optical band gap than CeOInS2 and PrOInS2 with on-center indium. Therefore, the electronic structure of LnOInS2 is governed by the indium site with an extremely large displacement. All LnOInS2 produced H2 gas under visible light irradiation in the presence of sacrificial electron donors.

A highly CO-tolerant atomically dispersed Pt catalyst for chemoselective hydrogenation.

The hydrogenation activity of noble metal, especially platinum (Pt), catalysts can be easily inhibited by the presence of a trace amount of carbon monoxide (CO) in the reaction feeds. Developing CO-resistant hydrogenation catalysts with both high activity and selectivity is of great economic interest for industry as it allows the use of cheap crude hydrogen and avoids costly product separation. Here we show that atomically dispersed Pt over α-molybdenum carbide (α-MoC) constitutes a highly CO-resistant catalyst for the chemoselective hydrogenation of nitrobenzene derivatives. The Pt1/α-MoC catalyst shows promising activity in the presence of 5,000 ppm CO, and has a strong chemospecificity towards the hydrogenation of nitro groups. With the assistance of water, high hydrogenation activity can also be achieved using CO and water as a hydrogen source, without sacrificing selectivity and stability. The weakened CO binding over the electron-deficient Pt single atom and a new reaction pathway for nitro group hydrogenation confer high CO resistivity and chemoselectivity on the catalyst.

Co-Based Catalysts Derived from Layered-Double-Hydroxide Nanosheets for the Photothermal Production of Light Olefins.

Solar-driven Fischer-Tropsch synthesis represents an alternative and potentially low-cost route for the direct production of light olefins from syngas (CO and H2 ). Herein, a series of novel Co-based photothermal catalysts with different chemical compositions are successfully fabricated by H2 reduction of ZnCoAl-layered double-hydroxide nanosheets at 300-700 °C. Under UV-vis irradiation, the photothermal catalyst prepared at 450 °C demonstrates remarkable CO hydrogenation performance, affording an olefin (C2-4= ) selectivity of 36.0% and an olefin/paraffin ratio of 6.1 at a CO conversion of 15.4%. Characterization studies using X-ray absorption fine structure and high-resolution transmission electron microscopy reveal that the active catalyst comprises Co and Co3 O4 nanoparticles on a ZnO-Al2 O3 mixed metal oxide support. Density functional theory calculations further demonstrate that the oxide-decorated metallic Co nanoparticle heterostructure weakens the further hydrogenation ability of the corresponding Co, leading to the high selectivity to light olefins. This study demonstrates a novel solar-driven catalyst platform for the production of light olefins via CO hydrogenation.