Diagnostic Protocols for Evaluating the Degradation Mechanisms in Gel-Polymer Lithium Batteries.

Gel polymer electrolytes (GPEs) present a promising alternative to standard liquid electrolytes (LE) for Lithium-ion Batteries (LIBs) and Lithium Metal Batteries bridging the advantages of both liquid and solid polymer electrolytes. However, their cycle life still lags behind that of standard LIBs, and their degradation mechanisms remain poorly understood. A significant challenge is the need for specific diagnostic protocols to systematically study the degradation mechanisms of GPE-based cells. Challenges include the separation of cell components and effective washing, as well as the study of the solid electrolyte interfaces, all complicated by the semi-solid nature of GPEs. This paper provides a brief review of existing literature and proposes a comprehensive set of diagnostic tools for dismantling and evaluating the degradation of GPE-based LIBs. Finally, these methods and recommendations are applied to LiNi0.5Mn1.5O4 (LNMO)-graphite cells, revealing electrolyte oxidation as a major source of cell degradation.

Transport Properties and Local Ions Dynamics in LATP-Based Hybrid Solid Electrolytes.

Hybrid solid electrolytes (HSEs), namely mixtures of polymer and inorganic electrolytes, have supposedly improved properties with respect to inorganic and polymer electrolytes. In practice, HSEs often show ionic conductivity below expectations, as the high interface resistance limits the contribution of inorganic electrolyte particles to the charge transport process. In this study, the transport properties of a series of HSEs containing Li(1+ x ) Alx Ti(2- x ) (PO4 )3 (LATP) as Li+ -conducting filler are analyzed. The occurrence of Li+ exchange across the two phases is proved by isotope exchange experiment, coupled with 6 Li/7 Li nuclear magnetic resonance (NMR), and by 2D 6 Li exchange spectroscopy (EXSY), which gives a time constant for Li+ exchange of about 50 ms at 60 °C. Electrochemical impedance spectroscopy (EIS) distinguishes a short-range and a long-range conductivity, the latter decreasing with LATP concentration. LATP particles contribute to the overall conductivity only at high temperatures and at high LATP concentrations. Pulsed field gradient (PFG)-NMR suggests a selective decrease of the anions' diffusivity at high temperatures, translating into a marginal increase of the Li+ transference number. Although the transport properties are only marginally affected, addition of moderate amounts of LATP to polymer electrolytes enhances their mechanical properties, thus improving the plating/stripping performance and processability.

Bio-based ether solvent and ionic liquid electrolyte for sustainable sodium-air batteries.

Sodium-air batteries (SABs) are receiving considerable attention for the development of next generation battery alternatives due to their high theoretical energy density (up to 1105 W h kg-1). However, most of the studies on this technology are still based on organic solvents; in particular, diglyme, which is highly flammable and toxic for the unborn child. To overcome these safety issues, this research investigates the first use of a branched ether solvent 1,2,3-trimethoxypropane (TMP) as an alternative electrolyte to diglyme for SABs. Through this work, the reactivity of the central tertiary carbon in TMP towards bare sodium metal was identified, while the addition of N-butyl-N-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide ([C4mpyr][TFSI]) as a co-solvent proved to be an effective strategy to limit the reactivity. Moreover, a Na-ß-alumina disk was employed for anode protection, to separate the TMP-based electrolyte from the sodium metal. The new cell design resulted in improved cell performance: discharge capacities of up to 1.92 and 2.31 mA h cm-2 were achieved for the 16.6 mol% NaTFSI in TMP and 16.6 mol% NaTFSI in TMP/[C4mpyr][TFSI] compositions, respectively. By means of SEM, Raman and 23Na NMR techniques, NaO2 cubes were identified to be the major discharge product for both electrolyte compositions. Moreover, the hybrid electrolyte was shown to hinder the formation of side-products during discharge - the ratio of NaO2 to side-products in the hybrid electrolyte was 2.4 compared with 0.8 for the TMP-based electrolyte - and a different charge mechanism for the dissolution of NaO2 cubes for each electrolyte was observed. The findings of this work demonstrate the high potential of TMP as a base solvent for SABs, and the importance of careful electrolyte composition design in order to step towards greener and less toxic batteries.

Quality-dependent performance of hydrophobic ZIF-67 upon high-pressure water intrusion-extrusion process.

Zeolitic imidazolate framework (ZIF) microporous materials have already been employed in many fields of energetic and environmental interest since the last decade. The commercial scale production of some of these materials makes them more accessible for their implementation in industrial processes; however, their massive synthesis may entail modifications to the preparation protocols, which may result in a loss in the optimization of this process and a drop in the material's quality. This fact may have implications for the performance of these materials during their lifetime, especially when they are used in applications such as energy dissipation, in which they are subjected to several operating cycles under high pressures. This study focuses on ZIF-67, a material that has demonstrated in the past its ability to dissipate energy through the water intrusion-extrusion process under high pressure. Two ZIF-67 samples were synthesized using different protocols, and 2 batches of different qualities (labelled as high quality (HQ) and low quality (LQ)) were obtained and analysed by water porosimetry to study their performance in the intrusion-extrusion process. Unexpectedly, minor structural differences, which are typically neglected especially under production conditions, had a dramatic effect on their performance. The results presented in this study reiterate the importance of quality control with respect to reproducibility of experimental results. In a broader perspective, they are critical to the technology transfer from academia to industry.

Synergistic theoretical and experimental study on the ion dynamics of bis(trifluoromethanesulfonyl)imide-based alkali metal salts for solid polymer electrolytes.

Model validation of a well-known class of solid polymer electrolyte (SPE) is utilized to predict the ionic structure and ion dynamics of alternative alkali metal ions, leading to advancements in Na-, K-, and Cs-based SPEs for solid-state alkali metal batteries. A comprehensive study based on molecular dynamics (MD) is conducted to simulate ion coordination and the ion transport properties of poly(ethylene oxide) (PEO) with lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) salt across various LiTFSI concentrations. Through validation of the MD simulation results with experimental techniques, we gain a deeper understanding of the ionic structure and dynamics in the PEO/LiTFSI system. This computational approach is then extended to predict ion coordination and transport properties of alternative alkali metal ions. The ionic structure in PEO/LiTFSI is significantly influenced by the LiTFSI concentration, resulting in different lithium-ion transport mechanisms for highly concentrated or diluted systems. Substituting lithium with sodium, potassium, and cesium reveals a weaker cation-PEO coordination for the larger cesium-ion. However, sodium-ion based SPEs exhibit the highest cation transport number, indicating the crucial interplay between salt dissociation and cation-PEO coordination for achieving optimal performance in alkali metal SPEs.

DFT-Assisted Solid-State NMR Characterization of Defects in Li2MnO3.

The complete description of defective structures and their impact on materials behavior is a great challenge due to difficulties associated with their reliable characterization in the nanoscale. In this paper, density functional theory (DFT) calculations are used to elucidate the solid-state nuclear magnetic resonance (NMR) spectra of Li2MnO3 which, combined with X-ray diffraction (XRD), provide a full description of disorder in this compound. While XRD allows accurate quantification of planar defects, the use of solid-state NMR reveals limited vacancy concentrations that were undetected by XRD as NMR is highly sensitive to the atomic local environments. The combination of these methods is here proved highly effective in overcoming the challenges of describing in great detail limited concentrations of disorder in transition metal oxides, providing information about structural variables that are essential to their application.

Sulindac Sulfide Induces the Formation of Large Oligomeric Aggregates of the Alzheimer's Disease Amyloid-ß Peptide Which Exhibit Reduced Neurotoxicity.

Alzheimer's disease is characterized by deposition of the amyloid ß-peptide (Aß) in brain tissue of affected individuals. In recent years, many potential lead structures have been suggested that can potentially be used for diagnosis and therapy. However, the mode of action of these compounds is so far not understood. Among these small molecules, the nonsteroidal anti-inflammatory drug (NSAID) sulindac sulfide received a lot of attention. In this manuscript, we characterize the interaction between the monomeric Aß peptide and the NSAID sulindac sulfide. We find that sulindac sulfide efficiently depletes the pool of toxic oligomers by enhancing the rate of fibril formation. In vitro, sulindac sulfide forms colloidal particles which catalyze the formation of fibrils. Aggregation is immediate, presumably by perturbing the supersaturated Aß solution. We find that sulindac sulfide induced Aß aggregates are structurally homogeneous. The C-terminal part of the peptide adopts a ß-sheet structure, whereas the N-terminus is disordered. The salt bridge between D23 and K28 is present, similar as in wild type fibril structures. (13)C-(19)F transferred echo double resonance experiments suggest that sulindac sulfide colocalizes with the Aß peptide in the aggregate.

Structural Mechanism of the Interaction of Alzheimer Disease Aß Fibrils with the Non-steroidal Anti-inflammatory Drug (NSAID) Sulindac Sulfide.

Alzheimer disease is the most severe neurodegenerative disease worldwide. In the past years, a plethora of small molecules interfering with amyloid-ß (Aß) aggregation has been reported. However, their mode of interaction with amyloid fibers is not understood. Non-steroidal anti-inflammatory drugs (NSAIDs) are known γ-secretase modulators; they influence Aß populations. It has been suggested that NSAIDs are pleiotrophic and can interact with more than one pathomechanism. Here we present a magic angle spinning solid-state NMR study demonstrating that the NSAID sulindac sulfide interacts specifically with Alzheimer disease Aß fibrils. We find that sulindac sulfide does not induce drastic architectural changes in the fibrillar structure but intercalates between the two ß-strands of the amyloid fibril and binds to hydrophobic cavities, which are found consistently in all analyzed structures. The characteristic Asp(23)-Lys(28) salt bridge is not affected upon interacting with sulindac sulfide. The primary binding site is located in the vicinity of residue Gly(33), a residue involved in Met(35) oxidation. The results presented here will assist the search for pharmacologically active molecules that can potentially be employed as lead structures to guide the design of small molecules for the treatment of Alzheimer disease.

Cryogenic solid state NMR studies of fibrils of the Alzheimer's disease amyloid-ß peptide: perspectives for DNP.

Dynamic Nuclear Polarization solid-state NMR holds the potential to enable a dramatic increase in sensitivity by exploiting the large magnetic moment of the electron. However, applications to biological solids are hampered in uniformly isotopically enriched biomacromolecules due to line broadening which yields a limited spectral resolution at cryogenic temperatures. We show here that high magnetic fields allow to overcome the broadening of resonance lines often experienced at liquid nitrogen temperatures. For a fibril sample of the Alzheimer's disease ß-amyloid peptide, we find similar line widths at low temperature and at room temperature. The presented results open new perspectives for structural investigations in the solid-state.

Small-molecule conversion of toxic oligomers to nontoxic ß-sheet-rich amyloid fibrils.

Several lines of evidence indicate that prefibrillar assemblies of amyloid-ß (Aß) polypeptides, such as soluble oligomers or protofibrils, rather than mature, end-stage amyloid fibrils cause neuronal dysfunction and memory impairment in Alzheimer's disease. These findings suggest that reducing the prevalence of transient intermediates by small molecule-mediated stimulation of amyloid polymerization might decrease toxicity. Here we demonstrate the acceleration of Aß fibrillogenesis through the action of the orcein-related small molecule O4, which directly binds to hydrophobic amino acid residues in Aß peptides and stabilizes the self-assembly of seeding-competent, ß-sheet-rich protofibrils and fibrils. Notably, the O4-mediated acceleration of amyloid fibril formation efficiently decreases the concentration of small, toxic Aß oligomers in complex, heterogeneous aggregation reactions. In addition, O4 treatment suppresses inhibition of long-term potentiation by Aß oligomers in hippocampal brain slices. These results support the hypothesis that small, diffusible prefibrillar amyloid species rather than mature fibrillar aggregates are toxic for mammalian cells.

Feasibility of Multifunctional Cellulose-Based Polysalt as a Polymer Matrix for Li Metal Polymer Batteries.

Li metal secondary batteries known for their high energy and power density are the much-awaited energy storage systems owing to the high specific capacity of Li metal. However, due to the instability of Li metal with common Li-ion battery electrolytes, a combination with a polymer electrolyte seems to be an effective strategy to alleviate the safety issues of employing Li metal and provide design conformity to the system. Current trends show improvements in different aspects, such as improving ionic conductivity, single-ion conductivity, mechanical stability, and electrochemical stability. A combination of all these properties has been a bottleneck for the development of polymer electrolytes for safe and efficient operation of all solid-state batteries. Herein, a multifunctional polysalt has been synthesized from green and sustainable materials, namely, ethyl cellulose, plasticized with adiponitrile, that contributes to meeting the critical properties enabling high compatibility with Li metal and a quasi-single-ion-conducting property while simultaneously acting as a matrix/filler for efficient operation of the cells. This multifunctional polymer matrix inhibits further decomposition of nitrile-based plasticizers on Li metal anodes with the formation of a favorable Li metal anode interface, thus enabling the utilization of high-voltage stable nitrile-based plasticizers (4.2 V) to be implemented as an electrolyte component for realization of high-voltage Li metal anode polymer batteries.

Unveiling the Impact of the Cations and Anions in Ionic Liquid/Glyme Hybrid Electrolytes for Na-O2 Batteries.

A series of hybrid electrolytes composed of diglyme and ionic liquids (ILs) have been investigated for Na-O2 batteries, as a strategy to control the growth and purity of the discharge products during battery operation. The dependence of chemical composition of the ILs on the size, purity, and distribution of the discharge products has been evaluated using a wide range of experimental and spectroscopic techniques. The morphology and composition of the discharge products found in the Na-O2 cells have a complex dependence on the physicochemical properties of the electrolyte as well as the speciation of the Na+ and superoxide radical anion. All of these factors control the nucleation and growth phenomena as well as electrolyte stability. Smaller discharge particle sizes and largely homogeneous (2.7 ± 0.5 µm) sodium superoxide (NaO2) crystals with only 9% of side products were found in the hybrid electrolyte containing the pyrrolidinium IL with a linear alkyl chain. The long-term cyclability of Na-O2 batteries with high Coulombic efficiency (>90%) was obtained for this electrolyte with fewer side products (20 cycles at 0.5 mA h cm-2). In contrast, rapid failure was observed with the use of the phosphonium-based electrolyte, which strongly stabilizes the superoxide anion. A high discharge capacity (4.46 mA h cm-2) was obtained for the hybrid electrolyte containing the pyrrolidinium-based IL bearing a linear alkyl chain with a slightly lower value (3.11 mA h cm-2) being obtained when the hybrid electrolyte contained similar pyrrolidinium-based IL bearing an alkoxy chain.

Influence of Transition-Metal Order on the Reaction Mechanism of LNMO Cathode Spinel: An Operando X-ray Absorption Spectroscopy Study.

An operando dual-edge X-ray absorption spectroscopy on both transition-metal ordered and disordered LiNi0.5Mn1.5O4 during electrochemical delithiation and lithiation was carried out. The large data set was analyzed via a chemometric approach to gain reliable insights into the redox activity and the local structural changes of Ni and Mn throughout the electrochemical charge and discharge reaction. Our findings confirm that redox activity relies predominantly on the Ni2+/4+ redox couple involving a transient Ni3+ phase. Interestingly, a reversible minority contribution of Mn3+/4+ is also evinced in both LNMO materials. While the reaction steps and involved reactants of both ordered and disordered LNMO materials generally coincide, we highlight differences in terms of reaction dynamics as well as in local structural evolution induced by the TM ordering.

Bacterial inclusion bodies of Alzheimer's disease ß-amyloid peptides can be employed to study native-like aggregation intermediate states.

The structures of oligomeric intermediate states in the aggregation process of Alzheimer's disease ß-amyloid peptides have been the subject of debate for many years. Bacterial inclusion bodies contain large amounts of small heat shock proteins (sHSPs), which are highly homologous to those found in the plaques of the brains of Alzheimer's disease patients. sHSPs break down amyloid fibril structure in vitro and induce oligomeric assemblies. Prokaryotic protein overexpression thus mimics the conditions encountered in the cell under stress and allows the structures of Aß aggregation intermediate states to be investigated under native-like conditions, which is not otherwise technically possible. We show that IB40/IB42 fulfil all the requirements to be classified as amyloids: they seed fibril growth, are Congo red positive and show characteristic ß-sheet-rich CD spectra. However, IB40 and IB42 are much less stable than fibrils formed in vitro and contain significant amounts of non-ß-sheet regions, as seen from FTIR studies. Quantitative analyses of solution-state NMR H/D exchange rates show that the hydrophobic cores involving residues V18-F19-F20 adopt ß-sheet conformations, whereas the C termini adopt α-helical coiled-coil structures. In the past, an α-helical intermediate-state structure has been postulated, but could not be verified experimentally. In agreement with the current literature, in which Aß oligomers are described as the most toxic state of the peptides, we find that IB42 contains SDS-resistant oligomers that are more neurotoxic than Aß42 fibrils. E. coli inclusion bodies formed by the Alzheimer's disease ß-amyloid peptides Aß40 and Aß42 thus behave structurally like amyloid aggregation intermediate states and open the possibility of studying amyloids in a native-like, cellular environment.

Structural analysis of zincocenes with substituted cyclopentadienyl rings.

New zincocenes [ZnCp'(2)] (2-5) with substituted cyclopentadienyl ligands C(5)Me(4)H, C(5)Me(4)tBu, C(5)Me(4)SiMe(2)tBu and C(5)Me(4)SiMe(3), respectively, have been prepared by the reaction of ZnCl(2) with the appropriate Cp'-transfer reagent. For a comparative structural study, the known [Zn(C(5)H(4)SiMe(3))(2)] (1), has also been investigated, along with the mixed-ring zincocenes [Zn(C(5)Me(5))(C(5)Me(4)SiMe(3))] (6) and [Zn(C(5)Me(5))(C(5)H(4)SiMe(3))] (7), the last two obtained by conproportionation of [Zn(C(5)Me(5))(2)] with 5 or 1, as appropriate. All new compounds were characterised by NMR spectroscopy, and by X-ray methods, with the exception of 7, which yields a side-product (C) upon attempted crystallisation. Compounds 5 and 6 were also investigated by (13)C CPMAS NMR spectroscopy. Zincocenes 1 and 2 have infinite chain structures with bridging Cp' ligands, while 3 and 4 exhibit slipped-sandwich geometries. Compounds 5 and 6 have rigid, eta(5)/eta(1)(sigma) structures, in which the monohapto C(5)Me(4)SiMe(3) ligand is bound to zinc through the silyl-bearing carbon atom, forming a Zn--C bond of comparable strength to the Zn--Me bond in ZnMe(2). Zincocene 5 has dynamic behaviour in solution, but a rigid eta(5)/eta(1)(sigma) structure in the solid state, as revealed by (13)C CPMAS NMR studies, whereas for 6 the different nature of the Cp' ligands and of the ring substituents of the eta(1)-Cp' group (Me and SiMe(3)) have permitted observation for the first time of the rigid eta(5)/eta(1) solution structure. Iminoacyl compounds of composition [Zn(eta(5)-C(5)Me(4)R)(eta(1)-C(NXyl)C(5)Me(4)R)] resulting from the reactions of some of the above zincocenes and CNXyl (Xyl=2,6-dimethylphenylisocyanide) have also been obtained and characterised.

Isotope and phase effects on the proton tautomerism in polycrystalline porphycene revealed by NMR.

Using high resolution solid state (15)N and (2)H spectroscopy and longitudinal relaxometry we have studied the tautomerism of porphycene in the solid state, corresponding to a double proton transfer in two cooperative hydrogen bonds. The tautomerism is degenerate above 225 K but the degeneracy is lifted below this temperature, indicating a phase transition. Thus, the high-temperature phase is characterized by a dynamic proton disorder and the low-temperature phase by a dynamic proton order. (15)N magnetization transfer experiments obtained under cross polarization (CP) and magic angle spinning (MAS) conditions reveal the presence of two nonequivalent molecules A and B in the unit cell of phase II, exhibiting slightly different equilibrium constants of the tautomerism. Rate constants of the tautomerism in phase I could be obtained by the analysis of the longitudinal (15)N and (2)H relaxation times. The former, obtained at 9.12 MHz, exhibit a T(1) minimum around 270 K and are consistent with proton transfer induced dipolar (1)H-(15)N relaxation mechanism. The latter, obtained at 46.03 MHz, exhibit a minimum around 330 K and arise from quadrupole relaxation. Within the margin of error, the rate constants of the HH and of the HD/DD tautomerism are the same, exhibiting a barrier of about 30 kJ mol(-1), as expected for an overbarrier reaction in a configuration with two compressed hydrogen bonds. By contrast, in the low-temperature phase a switch of the DD transfer kinetics into the nanosecond time scale is observed, exhibiting a non-Arrhenius temperature dependence which is typical for tunneling. This increase of the rate constants by lowering the temperature is discussed in terms of a switch from a concerted HH transfer in phase I to a stepwise transfer in phase II, where intermolecular interactions lower the energy of one of the cis-intermediates.

Controlling the Three-Phase Boundary in Na-Oxygen Batteries: The Synergy of Carbon Nanofibers and Ionic Liquid.

A series of electrospun binder-free carbon nanofiber (CNF) mats have been studied as air cathodes for Na-oxygen batteries using a pyrrolidinium-based electrolyte and compared with the commercial air cathode Toray 090. A tenfold increase in the discharge capacity is attained when using CNFs in comparison with Toray 090, affording a discharge capacity of 1.53 mAh cm-2 at a high discharge rate of 0.63 mA cm-2 . The good specific discharge and charge capacities of these CNFs are determined by the void space and the highly accessible surface of the carbon fiber. Furthermore, a threefold increase has been attained in terms of specific capacity by controlling the flooding of the air cathode and hence the location of the three-phase boundary within the CNF mat. The enhancement in performance has been correlated to the morphology, composition, distribution, and location of the discharge products. Sodium superoxide and peroxide were identified as the discharge products and, more importantly, the common side reaction discharge products, which are known to be detrimental to battery performance (including sodium fluoride, sodium hydroxide, and formate), were not observed, exemplifying the stability of the pyrrolidinium-based electrolyte and these binder-free CNF air cathodes.

NMR studies of ultrafast intramolecular proton tautomerism in crystalline and amorphous n,n'-diphenyl-6-aminofulvene-1-aldimine: solid-state, kinetic isotope, and tunneling effects.

Using solid-state NMR spectroscopy, we have detected and characterized ultrafast intramolecular proton tautomerism in the N-H-N hydrogen bonds of solid N, N'-diphenyl-6-aminofulvene-1-aldimine ( I) on the microsecond-to-picosecond time scale. (15)N cross-polarization magic-angle-spinning NMR experiments using (1)H decoupling performed on polycrystalline I- (15)N 2 and the related compound N-phenyl- N'-(1,3,4-triazole)-6-aminofulvene-1-aldimine ( II) provided information about the thermodynamics of the tautomeric processes. We found that II forms only a single tautomer but that the gas-phase degeneracy of the two tautomers of I is lifted by solid-state interactions. Rate constants, including H/D kinetic isotope effects (KIEs), on the microsecond-to-picosecond time scale were obtained by measuring and analyzing the longitudinal (15)N and (2)H relaxation times of I- (15)N 2, I- (15)N 2- d 10, and I- (15)N 2- d 1 over a wide temperature range. In addition to the microcrystalline modification, a novel amorphous modification of I was found and studied. In this modification, proton transfer is much faster than in the crystalline form. For both modifications, we observed large H/D KIEs that were temperature-dependent at high temperatures and temperature-independent at low temperatures. These findings are interpreted in terms of a simple quasiclassical tunneling model proposed by Bell and modified by Limbach. We obtained evidence that a reorganization energy is necessary in order to compress the N-H-N hydrogen bond and achieve a molecular configuration in which the barrier for H transfer is reduced and tunneling or an over-barrier reaction can occur.

Low-temperature NMR studies of Zn tautomerism and hindered rotations in solid zincocene derivatives.

Using a combination of NMR methods we have detected and studied fluxional motions in the slip-sandwich structure of solid decamethylzincocene (I, [(eta5-C5Me5)Zn(eta1-C5Me5)]). For comparison, we have also studied the solid iminoacyl derivative [(eta5-C5Me5)Zn(eta1-C(NXyl)C5Me5)] (II). The variable temperature 13C CPMAS NMR spectra of I indicate fast rotations of both Cp* rings in the molecule down to 156 K as well as the presence of an order-disorder phase transition around 210 K. The disorder is shown to be dynamic arising from a fast combined Zn tautomerism and eta1/eta5 reorganization of the Cp* rings between two degenerate states A and B related by a molecular inversion. In the ordered phase, the degeneracy of A and B is lifted; that is, the two rings X and Y are inequivalent, where X exhibits a larger fraction of time in the eta5 state than Y. However, the interconversion is still fast and characterized by a reaction enthalpy of DeltaH = 2.4 kJ mol-1 and a reaction entropy of DeltaS = 4.9 J K-1 mol-1. In order to obtain quantitative kinetic information, variable temperature 2H NMR experiments were performed on static samples of I-d6 and II-d6 between 300 and 100 K, where in each ring one CH3 is replaced by one CD3 group. For II-d6, the 2H NMR line shapes indicate fast CD3 group rotations and a fast "eta5 rotation", corresponding to 72 degrees rotational jumps of the eta5 coordinated Cp* ring. The latter motion becomes slow around 130 K. By line shape analysis, an activation energy of the eta5 rotation of about 21 kJ mol-1 was obtained. 2H NMR line shapes analysis of I-d6 indicates fast CD3 group rotations at all temperatures. Moreover, between 100 and 150 K, a transition from the slow to the fast exchange regime is observed for the 5-fold rotational jumps of both Cp* rings, exhibiting an activation energy of 18 kJ mol-1. This value was corroborated by 2H NMR relaxometry from which additionally the activation energies 6.3 kJ mol-1 and 11.2 kJ mol-1 for the CD3 rotation and the molecular inversion process were determined.