Synchronization transitions in Kuramoto networks with higher-mode interaction.

Synchronization is an omnipresent collective phenomenon in nature and technology, whose understanding is still elusive for real-world systems in particular. We study the synchronization transition in a phase oscillator system with two nonvanishing Fourier-modes in the interaction function, hence going beyond the Kuramoto paradigm. We show that the transition scenarios crucially depend on the interplay of the two coupling modes. We describe the multistability induced by the presence of a second coupling mode. By extending the collective coordinate approach, we describe the emergence of various states observed in the transition from incoherence to coherence. Remarkably, our analysis suggests that, in essence, the two-mode coupling gives rise to states characterized by two independent but interacting groups of oscillators. We believe that these findings will stimulate future research on dynamical systems, including complex interaction functions beyond the Kuramoto-type.

Imaging and Analysis of Encapsulated Objects through Self-Assembled Electron and Optically Transparent Graphene Oxide Membranes.

We demonstrate a technique for facile encapsulation and adhesion of micro- and nano objects on arbitrary substrates, stencils, and micro structured surfaces by ultrathin graphene oxide membranes via a simple drop casting of graphene oxide solution. A self-assembled encapsulating membrane forms during the drying process at the liquid-air and liquid-solid interfaces and consists of a water-permeable quasi-2D network of overlapping graphene oxide flakes. Upon drying and interlocking between the flakes, the encapsulating coating around the object becomes mechanically robust, chemically protective, and yet highly transparent to electrons and photons in a wide energy range, enabling microscopic and spectroscopic access to encapsulated objects. The characteristic encapsulation scenarios were demonstrated on a set of representative inorganic and organic micro and nano-objects and microstructured surfaces. Different coating regimes can be achieved by controlling the pH of the supporting solution, and the hydrophobicity and morphology of interfaces. Several specific phenomena such as compression of encased objects by contracting membranes as well as hierarchical encapsulations were observed. Finally, electron as well as optical microscopy and analysis of encapsulated objects along with the membrane effect on the image contrast formation, and signal attenuation are discussed.

Microfluidic assembly of Janus-like dimer capsules.

We describe the microfluidic assembly of soft dimer capsules by the fusion of individual capsules with distinct properties. Microscale aqueous droplets bearing the biopolymer chitosan are generated in situ within a chip and, as they travel downsteam, pairs of droplets are made to undergo controlled cross-linking and coalescence (due to a channel expansion) to form stable dimers. These dimers are very much like Janus particles: the size, shape, and functionality of each individual lobe within the dimer can be precisely controlled. Dimers with one lobe much shorter than the other resemble a bowling pin in their overall morphology, while dimers with nearly equal-sized lobes are akin to a snowman. To illustrate the diverse functionalities possible, we have prepared dimers wherein one lobe encapsulates paramagnetic Fe2O3 nanoparticles. The resulting dimers undergo controlled rotation in an external rotating magnetic field, much like a magnetic stir bar. The overall approach described here is simple and versatile: it can be easily adapted in numerous ways to produce soft structures with designed properties.

Effect of pulmonary exacerbations on long-term lung function decline in cystic fibrosis.

It is unknown what proportion of long-term lung function decline in cystic fibrosis (CF) is explained by pulmonary exacerbations. The aim of this study was to determine how exacerbations requiring hospitalisation contribute to the course of CF lung disease. This was a retrospective cohort study. The primary outcome was the rate of decline of forced expiratory volume in 1 s (FEV(1)) % predicted. Out of 851 subjects, 415 (48.8%) subjects had ≥ 1 exacerbation. After adjustment for confounders, the annual rate of FEV(1) decline in those without an exacerbation was 1.2% per yr (95% CI 1.0-1.5), compared with 2.5% per yr (95% CI 2.1-2.8) in those with an exacerbation. The proportion of overall FEV(1) decline associated with ≥ 1 exacerbation was 52% (95% CI 35.0-68.9). For a given number of exacerbations, the annual rate of FEV(1) decline was greatest in subjects with ≤ 6 months between exacerbations. Half of FEV(1) decline seen in CF patients was associated with pulmonary exacerbations. Time between exacerbations, specifically ≤ 6 months between exacerbations, plays an important contribution to overall lung function decline. These findings support using time to next exacerbation as a clinical end-point for CF trials.

Stenotrophomonas maltophilia in cystic fibrosis: serologic response and effect on lung disease.

RATIONALE: Stenotrophomonas maltophilia is one of the more common multidrug-resistant organisms isolated from the respiratory tract of patients with cystic fibrosis (CF), but the effect of chronic S. maltophilia infection on CF lung disease is unknown. OBJECTIVES: To determine the impact of chronic S. maltophilia infection on lung disease in CF. METHODS: We developed a serologic assay specific for S. maltophilia and in a cross-sectional study, measured serum antibodies to S. maltophilia in patients with CF to determine if a definition of chronic S. maltophilia isolation based on culture results corresponded to an immunologic response (serologic study). We then used this validated definition to examine the effect of chronic S. maltophilia on the severity of lung disease in a retrospective cohort study using the Toronto CF Database from 1997-2008 (cohort study). MEASUREMENTS AND MAIN RESULTS: Serum antibody levels to S. maltophilia were measured in 179 patients with CF. Patients with chronic S. maltophilia had significantly higher mean antibody levels to S. maltophilia flagellin (P < 0.0001) and whole cell (P = 0.0004) compared with patients with intermittent or no S. maltophilia. The cohort study included 692 patients with an average follow-up of 8.3 years. In an adjusted log linear model, patients with chronic S. maltophilia infection had a significantly increased risk of pulmonary exacerbation requiring hospitalization and antibiotics compared with patients who had never had S. maltophilia (relative risk = 1.63; P = 0.0002). CONCLUSIONS: Chronic S. maltophilia infection in patients with CF is associated with a specific immune response to this organism and is an independent risk factor for pulmonary exacerbations.

Cranial vasculature in zebrafish forms by angioblast cluster-derived angiogenesis.

Formation of embryonic vasculature involves vasculogenesis as endothelial cells differentiate and aggregate into vascular cords and angiogenesis which includes branching from the existing vessels. In the zebrafish which has emerged as an advantageous model to study vasculogenesis, cranial vasculature is thought to originate by a combination of vasculogenesis and angiogenesis, but how these processes are coordinated is not well understood. To determine how angioblasts assemble into cranial vasculature, we generated an etsrp:GFP transgenic line in which GFP reporter is expressed under the promoter control of an early regulator of vascular and myeloid development, etsrp/etv2. By utilizing time-lapse imaging we show that cranial vessels originate by angiogenesis from angioblast clusters, which themselves form by the mechanism of vasculogenesis. The two major pairs of bilateral clusters include the rostral organizing center (ROC) which gives rise to the most rostral cranial vessels and the midbrain organizing center (MOC) which gives rise to the posterior cranial vessels and to the myeloid and endocardial lineages. In Etsrp knockdown embryos initial cranial vasculogenesis proceeds normally but endothelial and myeloid progenitors fail to initiate differentiation, migration and angiogenesis. Such angioblast cluster-derived angiogenesis is likely to be involved during vasculature formation in other vertebrate systems as well.

The Effects of a Stress Management Group Education Program on Symptoms of Depression, Anxiety, and Stress in People With Comorbid Diabetes and Chronic and/or Recurrent Foot and Ankle Complications.

BACKGROUND: Individuals with diabetic foot and ankle complications are at heightened risk for depression, anxiety, and stress. PURPOSE: This study evaluated the effect of a stress management group education (SMGE) program in this population. METHODS: The 21-question Depression Anxiety Stress Scales and the Problem Areas in Diabetes scale were administered prior to, upon completion of, and at approximately 6 weeks after the program. RESULTS: Twenty-five patients from an urban diabetic foot and ankle center completed the study. CONCLUSION: The SMGE program demonstrated decreased levels of anxiety, depression, and diabetes problem areas for our study population.

Gigaxonin glycosylation regulates intermediate filament turnover and may impact giant axonal neuropathy etiology or treatment

Gigaxonin (also known as KLHL16) is an E3 ligase adaptor protein that promotes the ubiquitination and degradation of intermediate filament (IF) proteins. Mutations in human gigaxonin cause the fatal neurodegenerative disease giant axonal neuropathy (GAN), in which IF proteins accumulate and aggregate in axons throughout the nervous system, impairing neuronal function and viability. Despite this pathophysiological significance, the upstream regulation and downstream effects of normal and aberrant gigaxonin function remain incompletely understood. Here, we report that gigaxonin is modified by O-linked ß-N-acetylglucosamine (O-GlcNAc), a prevalent form of intracellular glycosylation, in a nutrient- and growth factor­dependent manner. MS analyses of human gigaxonin revealed 9 candidate sites of O-GlcNAcylation, 2 of which ­ serine 272 and threonine 277 ­ are required for its ability to mediate IF turnover in gigaxonin-deficient human cell models that we created. Taken together, the results suggest that nutrient-responsive gigaxonin O-GlcNAcylation forms a regulatory link between metabolism and IF proteostasis. Our work may have significant implications for understanding the nongenetic modifiers of GAN phenotypes and for the optimization of gene therapy for this disease.

MOFwich: Sandwiched Metal-Organic Framework-Containing Mixed Matrix Composites for Chemical Warfare Agent Removal.

This work describes a new strategy for fabricating mixed matrix composites containing layered metal-organic framework (MOF)/polymer films as functional barriers for chemical warfare agent protection. Through the use of mechanically robust polymers as the top and bottom encasing layers, a high-MOF-loading, high-performance-core layer can be sandwiched within. We term this multifunctional composite "MOFwich". We found that the use of elastomeric encasing layers enabled core layer reformation after breakage, an important feature for composites and membranes alike. The incorporation of MOFs into the core layer led to enhanced removal of chemical warfare agents while simultaneously promoting moisture vapor transport through the composite, showcasing the promise of these composites for protection applications.

Cognitive Function Deficits Associated With Long-Duration Type 1 Diabetes and Vascular Complications.

OBJECTIVE: Patients with type 1 diabetes now live long enough to experience cognitive decline. During middle age, they show mild cognitive deficits, but it is unknown whether severity increases with aging or whether cognitive profiles are similar to those of age-matched peers with and without diabetes. RESEARCH DESIGN AND METHODS: We tested and compared cognition in 82 individuals with 50 or more years of type 1 diabetes (Medalists), 31 age-matched individuals with type 2 diabetes, and 30 age-matched control subjects without diabetes. Medical histories and biospecimens were collected. We also evaluated the association of complications with cognition in Medalists only. RESULTS: Compared with control subjects, both individuals with type 1 diabetes and individuals with type 2 diabetes performed worse on immediate and delayed recall (P ≤ 0.002) and psychomotor speed in both hands (P ≤ 0.01) and showed a trend toward worse executive function (P = 0.05). In Medalists, cardiovascular disease was associated with decreased executive function and proliferative diabetic retinopathy with slower psychomotor speed. CONCLUSIONS: Both patients with type 1 and patients with type 2 diabetes showed overall worse cognition than control subjects. Further, in Medalists, a relationship between complications and cognition was seen. Although both groups with diabetes showed similar deficit patterns, the underlying mechanisms may be different. Now that patients with type 1 diabetes are living longer, efforts should be made to evaluate cognition and to identify modifying behaviors to slow decline.

Photocatalytic Oxidation of Sulfur Mustard and Its Simulant on BODIPY-Incorporated Polymer Coatings and Fabrics.

Sulfur mustard is one of the most toxic chemical warfare agents worldwide. We report the use of 4,4-difluoro-4-bora-3a,4a-diaza- s-indacene (BODIPY) photosensitizers as a fast and effective sulfur mustard decontaminant and their incorporation into various polymer coatings and fabrics, including army combat uniform. These BODIPY-embedded materials are capable of generating singlet oxygen under visible light irradiation and effectively detoxifying sulfur mustard by converting it into nontoxic sulfoxides as the major products. The rate of decontamination is found to be affected by the photosensitizer structure and concentration as well as the excitation wavelength. The most effective BODIPY-embedded self-decontamination material observed in this study shows a half-life of only 0.8 min. In comparison to the current methods, which use activated carbon as the adsorbent layer, these self-detoxifying coatings and fabrics provide constant destruction of and real-time protection against sulfur mustard.

Tuning the Morphology and Activity of Electrospun Polystyrene/UiO-66-NH2 Metal-Organic Framework Composites to Enhance Chemical Warfare Agent Removal.

This work investigates the processing-structure-activity relationships that ultimately facilitate the enhanced performance of UiO-66-NH2 metal-organic frameworks (MOFs) in electrospun polystyrene (PS) fibers for chemical warfare agent detoxification. Key electrospinning processing parameters including solvent type (dimethylformamide [DMF]) vs DMF/tetrahydrofuran [THF]), PS weight fraction in solution, and MOF weight fraction relative to PS were varied to optimize MOF incorporation into the fibers and ultimately improve composite performance. It was found that composites spun from pure DMF generally resulted in MOF crystal deposition on the surface of the fibers, while composites spun from DMF/THF typically led to MOF crystal deposition within the fibers. For cases in which the MOF was incorporated on the periphery of the fibers, the composites generally demonstrated better gas uptake (e.g., nitrogen, chlorine) because of enhanced access to the MOF pores. Additionally, increasing both the polymer and MOF weight percentages in the electrospun solutions resulted in larger diameter fibers, with polymer concentration having a more pronounced effect on fiber size; however, these larger fibers were generally less efficient at gas separations. Overall, exploring the electrospinning parameter space resulted in composites that outperformed previously reported materials for the detoxification of the chemical warfare agent, soman. The data and strategies herein thus provide guiding principles applicable to the design of future systems for protection and separations as well as a wide range of environmental remediation applications.

MOFabric: Electrospun Nanofiber Mats from PVDF/UiO-66-NH2 for Chemical Protection and Decontamination.

Textiles capable of capture and detoxification of toxic chemicals, such as chemical-warfare agents (CWAs), are of high interest. Some metal-organic frameworks (MOFs) exhibit superior reactivity toward CWAs. However, it remains a challenge to integrate powder MOFs into engineered materials like textiles, while retaining functionalities like crystallinity, adsorptivity, and reactivity. Here, we present a simple method of electrospinning UiO-66-NH2, a zirconium MOF, with polyvinylidene fluoride (PVDF). The electrospun composite, which we refer to as "MOFabric", exhibits comparable crystal patterns, surface area, chlorine uptake, and simulant hydrolysis to powder UiO-66-NH2. The MOFabric is also capable of breaking down GD (O-pinacolyl methylphosphonofluoridae) faster than powder UiO-66-NH2. Half-life of GD monitored by solid-state NMR for MOFabric is 131 min versus 315 min on powder UiO-66-NH2.

A new design for an artificial cell: polymer microcapsules with addressable inner compartments that can harbor biomolecules, colloids or microbial species.

Eukaryotic cells have an architecture consisting of multiple inner compartments (organelles) such as the nucleus, mitochondria, and lysosomes. Each organelle is surrounded by a distinct membrane and has unique internal contents; consequently, each organelle has a distinct function within the cell. In this study, we create biopolymer microcapsules having a compartmentalized architecture as in eukaryotic cells. To make these capsules, we present a biocompatible method that solely uses aqueous media (i.e., avoids the use of oil phases), requires no sacrificial templates, and employs a minimal number of steps. Our approach exploits the electrostatic complexation of oppositely charged polymers dissolved in aqueous media. Specifically, droplets of an anionic biopolymer are generated using a simple microcapillary device, with the droplets being sheared off the capillary tip by pulses of gas (air or nitrogen). The liquid droplets are then introduced into a reservoir whereupon they encounter multivalent cations as well as a cationic biopolymer; thereby, a solid shell is formed around each droplet by electrostatic interactions between the polymers while the core is ionically cross-linked into a gel. In the next step, a discrete number of these capsules are encapsulated within a larger outer capsule by repeating the same process with a wider capillary. Our approach allows us to control the overall diameter of these multicompartment capsules (MCCs) (∼300-500 µm), the diameters of the inner compartments (∼100-300 µm), and the number of inner compartments in an MCC (1 to >5). More importantly, we can encapsulate different payloads in each of the inner compartments, including colloidal particles, enzymes, and microbial cells, in all cases preserving their native functions. A hallmark of biological cells is the existence of cascade processes, where products created in one organelle are transported and used in another. As an initial demonstration of the capabilities afforded by our MCCs, we study a simple cascade process involving two strains of bacteria (E. coli), which communicate through small molecules known as autoinducers. In one compartment of the MCC, we cultivate E. coli that produces autoinducer 2 (AI-2) in the presence of growth media. The AI-2 then diffuses into an adjacent compartment within the MCC wherein a reporter strain of E. coli is cultivated. The reporter E. coli imbibes the AI-2 and in turn, produces a fluorescence response. Thus, the action (AI-2 production) and response (fluorescence signal) are localized within different compartments in the same MCC. We believe this study is an important advance in the path towards an artificial cell.

Light-Directed Self-Assembly of Robust Alginate Gels at Precise Locations in Microfluidic Channels.

Recently there has been much interest in using light to activate self-assembly of molecules in a fluid, leading to gelation. The advantage of light over other stimuli lies in its spatial selectivity, i.e., its ability to be directed at a precise location, which could be particularly useful in microfluidic applications. However, existing light-responsive fluids are not suitable for these purposes since they do not convert into sufficiently strong gels that can withstand shear. Here, we address this deficiency by developing a new light-responsive system based on the well-known polysaccharide, alginate. The fluid is composed entirely of commercially available components: alginate, a photoacid generator (PAG), and a chelated complex of divalent strontium (Sr(2+)) cations. Upon exposure to ultraviolet (UV) light, the PAG dissociates to release H(+) ions, which in turn induce the release of free Sr(2+) from the chelate. The Sr(2+) ions self-assemble with the alginate chains to give a stiff gel with an elastic modulus ∼2000 Pa and a yield stress ∼400 Pa (this gel is strong enough to be picked up and held by one's fingers). The above fluid is sent through a network of microchannels and a short segment of a specific channel is exposed to UV light. At that point, the fluid is locally transformed into a strong gel in a few minutes, and the resulting gel blocks the flow through that channel while other channels remain open. When the UV light is removed, the gel is gradually diluted by the flow and the channel reopens. We have thus demonstrated a remote-controlled fluidic valve that can be closed by shining light and reopened when the light is removed. In addition, we also show that light-induced gelation of our alginate fluid can be used to deposit biocompatible payloads at specific addresses within a microchannel.

Catalytic Propulsion and Magnetic Steering of Soft, Patchy Microcapsules: Ability to Pick-Up and Drop-Off Microscale Cargo.

We describe the creation of polymeric microcapsules that can exhibit autonomous motion along defined trajectories. The capsules are made by cross-linking aqueous microdroplets of the biopolymer chitosan using glutaraldehyde. A coflow microfluidic tubing device is used to generate chitosan droplets containing nanoparticles (NPs) with an iron (Fe) core and a platinum (Pt) shell. The droplets are then incubated in a Petri dish with the cross-linking solution, and an external magnet is placed below the Petri dish to pull the NPs together as a collective "patch" on one end of each droplet. This results in cross-linked capsules (∼150 µm in diameter) with an anisotropic (patchy) structure. When these capsules are placed in a solution of H2O2, the Pt shell of the NPs catalyzes the decomposition of H2O2 into O2 gas, which is ejected from the patchy end in the form of bubbles. As a result, the capsules (which are termed micromotors) move in a direction opposite to the bubbles. Furthermore, the micromotors can be steered along specific paths by an external magnet (the magnetic response arises due to the Fe in the core of the NPs). A given micromotor can thus be directed to meet with and adhere to an inert capsule, i.e., a model cargo. Adhesion occurs due to the soft nature of the two structures. Once the cargo is picked up, the micromotor-cargo pair can be moved along a specific path to a destination, whereupon the cargo can be released from the micromotor. We believe these soft micromotors offer significant benefits over their existing hard counterparts because of their biocompatibility, biodegradability, and ability to encapsulate a variety of payloads.

The Language of End-of-Life Decision Making: A Simulation Study.

BACKGROUND: Framing is known to influence decision making. OBJECTIVE: The study objective was to describe language used by physicians when discussing treatment options with a critically and terminally ill elder. METHODS: High-fidelity simulation was used, involving an elder with end-stage cancer and life-threatening hypoxia, followed by a debriefing interview. Subjects were hospitalist, emergency medicine, and critical care physicians from three academic medical centers. Measures were observation of encounters in real time followed by content analysis of simulation and debriefing interview transcripts. During the simulation we identified the first mention ("broaching") of principal treatment options--intubation and mechanical ventilation (life-sustaining treatment [LST]) and palliation in anticipation of death (palliation)--and used constant comparative methods to identify language used. We identified physician opinions about the use of LST in this clinical context during the debriefing interviews, and compared language used with opinions. RESULTS: Among 114 physician subjects, 106 discussed LST, 86 discussed palliation, and 84 discussed both. We identified five frames: will (decided), must (necessary), should (convention), could (option), and ask (elicitation of preferences). Physicians broached LST differently than palliation (p<0.01), most commonly framing LST as necessary (53%), while framing palliation as optional (49%). Among physicians who framed LST as imperative (will or must), 16 (30%) felt intubation would be inappropriate in this clinical situation. CONCLUSIONS: In this high-fidelity simulation experiment involving a critically and terminally ill elder, the majority of physicians framed the available options in ways implying LST was the expected or preferred choice. Framing of treatment options could influence ultimate treatment decisions.

Microfluidic generation of uniform water droplets using gas as the continuous phase.

Microfluidic schemes for forming uniform aqueous microdroplets usually rely on contacting the aqueous liquid (dispersed phase) with an immiscible oil (continuous phase). Here, we demonstrate that the oil can be substituted with gas (nitrogen or air) while still retaining the ability to generate discrete and uniform aqueous droplets. Our device is a capillary co-flow system, with the inner flow of water getting periodically dispersed into droplets by the external flow of gas. The droplet size and different formation modes can be tuned by varying the liquid and gas flow rates. Importantly, we identify the range of conditions that correspond to the "dripping mode", i.e., where discrete droplets are consistently generated with no satellites. We believe this is a significant development that will be beneficial for chemical and biological applications requiring clean and contaminant-free droplets, including DNA amplification, drug encapsulation, and microfluidic cell culture.

Chronic Stenotrophomonas maltophilia infection and mortality or lung transplantation in cystic fibrosis patients.

BACKGROUND: Chronic Stenotrophomonas maltophilia infection is an independent risk factor for severe pulmonary exacerbations in cystic fibrosis (CF) patients. The goal of this study was to determine the effect of chronic S. maltophilia infection on mortality and the need for lung transplantation in a longitudinal study of children and adults with CF. METHODS: This was a cohort study of CF patients from the Hospital for Sick Children and St Michael's Hospital (Toronto, Canada) from 1997 to 2008. A Cox Regression model was used to estimate the hazard ratio (HR) to time of death or lung transplantation adjusting for age, gender, genotype, pancreatic status, CF related diabetes (CFRD), forced expiratory volume in 1 s (FEV1), body mass index, number of pulmonary exacerbations, Pseudomonas aeruginosa, Burkholderia cepacia complex, Aspergillus and chronic S. maltophilia infection. RESULTS: A total of 687 patients were followed over the 12 year study period; 95 patients underwent a lung transplantation (of which 26 died) and an additional 49 patients died (total 144 events). In a Cox Regression model adjusting for baseline FEV1, baseline infection with B. cepacia complex (HR 1.72, 95% CI 1.09-2.71) and baseline chronic S. maltophilia infection (HR 2.80, 95% CI 1.65-4.76) were significantly associated with death or lung transplant. However, in a time-varying model, infection with B. cepacia complex and chronic S. maltophilia infection were no longer significant. CONCLUSIONS: Baseline chronic S. maltophilia infection is associated with an almost three-fold increased risk of death or lung transplant in CF patients. It is still unclear, however, whether chronic S. maltophilia infection is simply a marker of severity of disease and ultimate mortality or whether it is causally related to disease progression.

Factors influencing the acquisition of Stenotrophomonas maltophilia infection in cystic fibrosis patients.

BACKGROUND: Stenotrophomonas maltophilia is one of the most common multi-drug resistant organisms causing pulmonary infections in CF patients. It is unknown whether S. maltophilia infection follows the same pattern and shares similar risk factors for acquisition as described for Pseudomonas aeruginosa. METHODS: We examined all clinical events from 1997 to 2008 in the Toronto CF Database to identify risk factors for the acquisition of S. maltophilia and to define distinct patterns of infection. RESULTS: We followed 601 patients over 12 years, during which time one quarter of subjects had at least one positive culture for S. maltophilia; the incidence rate was slightly higher in children (11.6/100 person years) compared with adults (10.6/100 person years). Using multi-variable Cox proportional hazards models, steeper rate of FEV1 decline was a significant risk factor for S. maltophilia acquisition, whereas new infections were less likely to occur with greater oral antibiotic use and a history of Burkholderia cepacia complex infection. CONCLUSIONS: This study illustrates the evolution of S. maltophilia infection over time in a large cohort of adults and children with CF. Younger CF patients, and those with greater lung function decline were at increased risk of S. maltophilia infection. The use of oral antibiotics to maintain lung function may be a way of decreasing the risk of infection. However, the optimal management of CF patients with persistent S. maltophilia infection is not yet known and requires further studies.