RESUMEN
Quasi-2D perovskites exhibit impressive optoelectronic properties and hold significant promise for future light-emitting devices. However, the efficiency of perovskite light-emitting diodes (PeLEDs) is seriously limited by defect-induced nonradiative recombination and imbalanced charge injection. Here, the defect states are passivated and charge injection balance is effectively improved by introducing the additive cyclohexanemethylammonium (CHMA) to bromide-based Dion-Jacobson (D-J) structure quasi-2D perovskite emission layer. CHMA participates in the crystallization of perovskite, leading to high quality film composed of compact and well-contacted grains with enhanced hole transportation and less defects. As a result, the corresponding PeLEDs exhibit stable pure blue emission at 466 nm with a maximum external quantum efficiency (EQE) of 9.22%. According to current knowledge, this represents the highest EQE reported for pure-blue PeLEDs based on quasi-2D bromide perovskite thin films. These findings underscore the potential of quasi-2D perovskites for advanced light-emitting devices and pave the way for further advancements in PeLEDs.
RESUMEN
High-performance pure red perovskite light-emitting diodes (PeLEDs) with an emission wavelength shorter than 650â nm are ideal for wide-color-gamut displays, yet remain an unprecedented challenge to progress. Mixed-halide CsPb(Br/I)3 emitter-based PeLEDs suffer spectral stability induced by halide phase segregation and CsPbI3 quantum dots (QDs) suffer from a compromise between emission wavelength and electroluminescence efficiency. Here, we demonstrate efficient pure red PeLEDs with an emission centered at 638â nm based on PbClx -modified CsPbI3 QDs. A nucleophilic reaction that releases chloride ions and manipulates the ligand equilibrium of the colloidal system is developed to synthesize the pure red emission QDs. The comprehensive structural and spectroscopic characterizations evidence the formation of PbClx outside the CsPbI3 QDs, which regulates exciton recombination and prevents the exciton from dissociation induced by surface defects. In consequence, PeLEDs based on PbClx -modified CsPbI3 QDs with superior optoelectronic properties demonstrate stable electroluminescence spectra at high driving voltages, a record external quantum efficiency of 26.1 %, optimal efficiency roll-off of 16.0 % at 1000â cd m-2 , and a half lifetime of 7.5â hours at 100â cd m-2 , representing the state-of-the-art pure red PeLEDs. This work provides new insight into constructing the carrier-confined structure on perovskite QDs for high-performance PeLEDs.
RESUMEN
Vacuum vapor deposition (VVD) is a promising way to advancing the commercialization of perovskite light sources owing to its convenience for wafer-scale mass production and compatibility with silicon photonics manufacturing infrastructure. However, the light emission performance of VVD-grown perovskites still lags far behind that of the conventional solution-processed counterparts due to their inferior luminescence properties. Here, a 0D/3D cesium-lead-bromide perovskite composite film is prepared on Si/SiO2 substrates through composition modulation with the VVD method, which exhibits an ultralow amplified spontaneous emission (ASE) threshold down to 14.3 µJ cm-2 in the optimal films, which is on par with that of the solution-processed counterparts. Meanwhile, they also display intriguing operational stability with negligible emission intensity decay under continuous excitation above ASE threshold for 4 h in the air. The outstanding ASE performance mainly originates from the reduced trap density and weakened electron-phonon coupling in the 3D CsPbBr3 phase enabled by the incorporation of the 0D Cs4 PbBr6 phase. Finally, by integrating the composite film with the distributed feedback (DFB) cavity, DFB lasing is achieved with a low threshold of 18.2 µJ cm-2 under nanosecond-pulsed laser pumping, which highlights the potential of VVD-processed perovskites for developing high-performance lasers.
RESUMEN
Atomically thin two-dimensional transition metal dichalcogenides (TMDs) have shown great potential for optoelectronic applications, including photodetectors, phototransistors, and spintronic devices. However, the applications of TMD-based optoelectronic devices are severely restricted by their weak light absorption and short exciton lifetime due to their atomically thin nature and strong excitonic effect. To simultaneously enhance the light absorption and photocarrier lifetime of monolayer semiconductors, here, we report 3D/2D perovskite/TMD type II heterostructures by coupling solution processed highly smooth and ligand free CsPbBr3 film with MoS2 and WS2 monolayers. By time-resolved spectroscopy, we show interfacial hole transfer from MoS2 (WS2) to the perovskite layer occurs in an ultrafast time scale (100 and 350 fs) and interfacial electron transfer from ultrathin CsPbBr3 to MoS2 (WS2) in â¼3 (9) ps, forming a long-lived charge separation with a lifetime of >20 ns. With increasing CsPbBr3 thickness, the electron transfer rate from CsPbBr3 to TMD is slower, but the efficiency remains to be near-unity due to coupled long-range diffusion and ultrafast interfacial electron transfer. This study indicates that coupling solution processed lead halide perovskites with strong light absorption and long carrier diffusion length to monolayer semiconductors to form a type II heterostructure is a promising strategy to simultaneously enhance the light harvesting capability and photocarrier lifetime of monolayer semiconductors.
RESUMEN
Solution-processed all-inorganic CsPbX3 perovskites exhibit outstanding optoelectronic properties and are being considered as a promising optical gain medium, with impressive performance in the green and red region. However, the development of CsPbX3 for blue emission is still lagging far behind, owing to difficulties in thin films synthesis and spectral instability subject to light irradiation. Here, a facile vapor anion exchange (VAE) method that enables preparation of blue-emitting perovskite films with both excellent surface morphology and good photo-stability is reported. The mixed-Br/Cl quasi-2D perovskite films show spectrally stable pure blue emission (471 nm) under continuous-wave laser irradiation with power density as high as 81 W cm-2 . Furthermore, optically pumped blue amplified spontaneous emission (ASE) is realized based on the mixed-Br/Cl perovskite films. By changing the duration of VAE treatment, the ASE peak can be tuned from 537 nm down to 475 nm. This work not only presents a facile method to prepare high quality mixed halide Cs-based perovskite films, but also pave the way for further exploration of stable blue perovskite lasing.
RESUMEN
Addressing the issue of inadequate temperature tolerance in traditional polymers, in this study, we successfully executed a one-step synthesis of intelligent-responsive polymers which have excellent adaptability in water-gas alternating displacement scenarios. Utilizing the fatty acid method, we produced OANND from oleic acid (OA) and N,N-dimethyl-1,3-propanediamine (NND). Upon testing the average particle size in the aqueous solution both prior and subsequent to CO2 passage, it became evident that OANND assumes the form of a small-molecule particle in the aqueous phase, minimizing damage during formation. Notably, upon CO2 exposure, it promptly organizes into stable micelles with an average size of 88 nm and a relatively uniform particle distribution. This unique characteristic endows it with a rapid CO2 response mechanism and the ability to form a highly resilient gel. In the exploration of viscoelastic fluids, we observed the remarkable behavior of the AONND aqueous solution when CO2/N2 was introduced. This system displayed repeatable transitions between aqueous and gel states, with the highest viscosity peaking at approximately 3895 mPa·s, highlighting its viscosity reversibility and reusability properties. The rheological property results that we obtained indicate that an elongated micellar structure is present in the solution system, with the optimal concentration ratio for its formation determined as 0.8, which is the molar ratio of the OANND-NaOA system. In the sealing performance tests, a 1.0 wt% concentration of the gel system exhibited excellent injectability properties. At 80 °C, this gel effectively reduced the permeability of a sand-filled model to 94.5% of its initial value, effectively sealing potential leakage paths or gas fluxes. This remarkable ability to block leakage paths and reduce seepage capacity highlights the material's superior blocking effect and erosion resistance properties. Furthermore, even at a temperature of 90 °C and an injection pore volume (PV) of 3, this plugging system could reduce the permeability of a high-permeability sand-filled model to over 90% of its initial value.
RESUMEN
All-inorganic perovskite films have emerged as promising candidates for laser gain materials owing to their outstanding optoelectronic properties and straightforward solution processing. However, the performance of blue perovskite lasing still lags far behind due to the inevitable high density of defects. Herein, we demonstrate that defects can be utilized instead of passivated/removed to form bound excitons to achieve excellent blue stimulated emission in perovskite films. Such a strategy emphasizes defect engineering by introducing a deep-level defect in mixed-Rb/Cs perovskite films through octylammonium bromide (OABr) additives. Consequently, the OA-Rb/Cs perovskite films exhibit blue amplified spontaneous emission (ASE) from defect-related bound excitons with a low threshold (13.5 µJ/cm2) and a high optical gain (744.7 cm-1), which contribute to a vertical-cavity surface-emitting laser with single-mode blue emission at 482 nm. This work not only presents a facile method for creating blue laser gain materials but also provides valuable insights for further exploration of high-performance blue lasing in perovskite films.
RESUMEN
Broadband electroluminescence based on environment-friendly emitters is promising for healthy lighting yet remains an unprecedented challenge to progress. The copper halide-based emitters are competitive candidates for broadband emission, but their high-performance electroluminescence shows inadequate broad emission bandwidth of less than 90 nm. Here, we demonstrate efficient ultra-broadband electroluminescence from a copper halide (CuI) nanocluster single emitter prepared by a one-step solution synthesis-deposition process, through dedicated design of ligands and subtle selection of solvents. The CuI nanocluster exhibits high rigidity in the excitation state as well as dual-emissive modes of phosphorescence and temperature-activated delayed fluorescence, enabling the uniform cluster-composed film to show excellent stability and high photoluminescent efficiency. In consequence, ultra-broadband light-emitting diodes (LEDs) present nearly identical performance in an inert or air atmosphere without encapsulation and outstanding high-temperature operation performance, reaching an emission full width at half maximum (FWHM) of ~120 nm, a peak external quantum efficiency of 13%, a record maximum luminance of ~50,000 cd m-2, and an operating half-lifetime of 137 h at 100 cd m-2. The results highlight the potential of copper halide nanoclusters for next-generation healthy lighting.
RESUMEN
Based on the orthotropic model of the plate, the method to optimize the sound response of the distributed-mode loudspeaker (DML) using the attached masses and the multi-exciters has been investigated. The attached masses method will rebuild the modes distribution of the plate, based on which multi-exciter method will smooth the sound response. The results indicate that the method can be used to optimize the sound response of the DML.
RESUMEN
The orthotropic model of the plate is established and the genetic simulated annealing algorithm is developed for optimization of the mode distribution of the orthotropic plate. The experiment results indicate that the orthotropic model can simulate the real plate better. And optimization aimed at the equal distribution of the modes in the orthotropic model is made to improve the corresponding sound pressure responses.