An 'on-off-on' fluorescent switch based on a luminous covalent organic framework for the rapid and selective detection of glyphosate.

Glyphosate, the most used herbicide in the world, has a residue problem that cannot be ignored. However, glyphosate itself does not have fluorescence emission and lacks the conditions for fluorescence detection. In this work, a rapid and selective fluorescence detection method of glyphosate was designed by an 'on-off-on' fluorescent switch based on a luminous covalent organic framework (L-COF). Only the fixed concentration of Fe3+ as an intermediate could trigger the fluorescent switch and no incubation step was required. The proposed method showed good accuracy with a correlation coefficient of 0.9978. The method's limits of detection and quantitation were 0.88 and 2.93 µmol/L, which were lower than the maximum allowable residue limits in some regulations. Environmental water samples and tomatoes were selected as actual samples to verify the application in a complex matrix. A satisfactory mean recovery from 87% to 106% was gained. Furthermore, Fe3+ could induce fluorescence quenching of L-COF through the photo-induced electron transfer (PET) effect, while the addition of glyphosate could block the PET effect to achieve detection. These results demonstrated the proposed method had abilities to detect glyphosate and broaden the application of L-COF.

Enhanced cyanogen chloride formation after UV/PS and UV/H2O2 pre-oxidation and chlorination in natural river water.

Ultraviolet/persulfate (UV/PS) and Ultraviolet/hydrogen peroxide (UV/H2O2) have attracted much attention in recent years as advanced oxidation processes for water treatment. However, it is not all clear how these two methods affect the formation of cyanogen chloride (CNCl) in the subsequent water chlorination process. In this study, it was found that both UV/H2O2 and UV/PS pre-oxidation promoted the formation of CNCl in six actual water samples collected from urban rivers. Glycine, uric acid, arginine and histidine were investigated as the model compounds to explore the effects of different methods on the production of CNCl. The results showed that compared with chlorination alone, pre-oxidation by UV/H2O2 and UV/PS can reduce the production of CNCl for glycine and uric acid by up to 95% during post-chlorination process. However, they can greatly promote the formation of CNCl for arginine and histidine by up to 120-fold. In a more detailed investigation, pre-oxidation of histidine formed highly reactive intermediates to chlorine, leading to increased CNCl formation and chlorine consumption. The results showed that the precursors of CNCl was altered after pre-oxidation, and need to be re-evaluated.

Optimizing Photochirogenic Performance by Solvent-Driven Conformational Fixation in Enantiodifferentiating Photoisomerization of (Z)-Cyclooctene Mediated by Sensitizing ß-Cyclodextrin Hosts.

Catalytic enantiodifferentiating photoisomerization of cyclooctene (1Z) included and sensitized by regioisomeric 6-O-(o-, m-, and p-methoxybenzoyl)-ß-cyclodextrins (CDs) was performed under a variety of solvent conditions for higher enantioselectivities. The enantiomeric excess (ee) of chiral (E)-isomer (1E) produced was a critical function of all the internal and external factors examined, in particular, the sensitizer structure and the solvent conditions, to afford (R)-1E in record-high ee's of up to 67% upon sensitization with the meta-substituted ß-CD host in water and salt solutions but neither in 50% aqueous ethanol nor with the ortho- and para-substituted hosts. The mechanistic origin of the sudden ee enhancement achieved under the specific conditions is discussed on the basis of the circular dichroism spectral behaviors upon substrate inclusion and the compensatory enthalpy-entropy relationship of the activation parameters for the enantiodifferentiating photoisomerization.

Phenylboronic acid-functionalized cross-linked chitosan magnetic adsorbents for the magnetic solid-phase extraction of benzoylurea pesticides.

In this study, a 4-formylphenylboronic acid-modified cross-linked chitosan magnetic nanoparticle (FPBA@CCHS@Fe3 O4 ) was fabricated. The synthesized material was utilized as the magnetic solid-phase extraction adsorbent for the enrichment of six benzoylurea pesticides. In addition to B-N coordination, FPBA@CCHS@Fe3 O4 interacts with benzoylureas through hydrogen bonds and π-π stacking interaction on account of rich active groups (amino and hydroxyl) and aromatic rings in structure. Compared to traditional extraction methods, less adsorbent (20 mg) and reduced extraction time (3 min) were achieved. The adsorbent also exhibited good reusability (no less than 10 times). Coupled with a high-performance liquid chromatography-diode array detector, satisfactory recoveries (89.1-103.9%) and an acceptable limit of detection (0.2-0.7 µg/L) were obtained. Under optimized conditions, the established method was successfully applied to the tea infusion samples from six major tea categories with acceptable recoveries ranging from 76.8 to 110%, indicating its application potential for the quantitative detection of pesticides in complex matrices.

Perfluoro octanoic acid-modified magnetic hyperbranched polyamideamine as a sorbent for the extraction of fluorine-containing pesticides from water samples.

Perfluoro octanoic acid was modified on the surface of magnetic hyperbranched polyamideamine by acid amine condensation. The morphology and chemical composition of perfluoro octanoic acid-modified magnetic hyperbranched polyamideamine was characterized by transmission electron microscopy, Fourier transform infrared spectroscopy, zeta potential, particle size analysis, Brunauer-Emmett-Teller measurement, and X-ray photoelectron spectroscopy. Perfluoro octanoic acid-modified magnetic hyperbranched polyamideamine was applied in magnetic solid phase extraction for the separation and enrichment of four fluorine-containing pesticides (indoxacarb, metaflumizone, cyflumetofen, and cyhalothrin). The magnetic solid phase extraction method based on perfluoro octanoic acid-modified magnetic hyperbranched polyamideamine has low method detection limits (0.30-0.49 µg/L), a satisfactory coefficient of determination (0.9995-0.9999), wide linear ranges (2.5-250 µg/L), and good repeatability (intraday: 2.6-4.7%; interday: 1.1-7.9%). The enrichment factors and extraction efficiences varied from 55 to 76 and 69 to 96%, respectively. The sorbent-to-sorbent reproducibility was in the range of 3.2-7.6%, indicating that the synthesis of the sorbent was reliable. For the detection of actual water samples, the relative recoveries were in the range from 80.1 to 114.4% with relative standard deviations less than 9.6%. The calculation results of quantum chemistry calculations showed that after the modification of perfluoro octanoic acid, the interaction between the sorbent and four fluorine-containing pesticides was stronger.

Use of 1-octyl-3-methylimidazole hexafluorophosphate modified magnetic hyperbranched polyamideamine as sorbent for the extraction of pyrethroid insecticides from tea infusion.

Magnetic hyperbranched polyamideamine was carboxylated using succinic anhydride and modified further with 1-octyl-3-methylimidazole hexafluorophosphate successively. The morphology and chemical composition of the prepared material was characterized by transmission electron microscopy, scanning electron microscopy, Fourier transform infrared spectroscopy, Brunauer-Emmett-Teller measurement, X-ray photoelectron spectroscopy, etc. 1-Octyl-3-methylimidazole hexafluorophosphate modified magnetic hyperbranched polyamideamine was used as sorbent in the magnetic solid-phase extraction for the separation and enrichment of five pyrethroid insecticides from tea infusion. The magnetic solid-phase extraction method proposed in this article has low method detection limits (0.53-0.71 ng/mL), acceptable coefficient of determination (0.9992-0.9998), wide linear ranges (2.5-500.0 ng/mL), and good repeatability (intraday: 1.2-6.3%; interday: 1.6-5.4%). In the detection of five pyrethroid insecticides in tea infusion, relative recoveries were in the range from 87.7 to 114.7% with satisfactory relative standard deviations (0.2-7.4%). With the aid of quantum chemistry calculations, the interaction energy between the sorbent and five pyrethroid insecticides was calculated, which proved the necessity of the modification of 1-octyl-3-methylimidazole hexafluorophosphate.

Hyperbranched aromatic polyamide modified magnetic nanoparticles for the extraction of benzoylurea insecticides.

Herein, a novel hyperbranched aromatic polyamide-coated magnetic sorbent was prepared by in situ polymerization on the surface of amino-functionalized Fe3 O4 nanoparticles. The magnetic sorbent was characterized by transmission electron microscopy, Fourier transform infrared spectroscopy, elemental analysis, Brunauer-Emmett-Teller measurement, and X-ray photoelectron spectroscopy, etc. The new magnetic sorbent was used in the magnetic solid-phase extraction for the detection of seven benzoylurea insecticides. Under optimum conditions, low method detection limits (0.56-1.20 ng/mL), acceptable coefficient of determination (0.9967-0.9996), wide linear ranges (2.5-500.0 ng/mL), and good repeatability (intraday: 2.0-7.3%; interday: 1.9-9.2%) were achieved. The magnetic solid-phase extraction method based on the new magnetic sorbent showed good reliability in the analysis of seven benzoylurea insecticides in real water samples, as the relative recoveries were in the range from 80.1 to 116.3% with satisfactory RSDs (0.1-9.8%). By means of density functional theory and semiempirical quantum mechanical, the binding configuration and interaction energy of hyperbranched aromatic polyamide and benzoylurea insecticides were calculated. The result of theoretical calculation revealed that the adsorption of benzoylurea insecticides by hyperbranched aromatic polyamide was derived from hydrogen bonding and π-π stacking. The contribution of π-π stacking was greater than that of hydrogen bond, which was confirmed by energy decomposition analysis.

Phosphonium-based deep eutectic solvent coupled with vortex-assisted liquid-liquid microextraction for the determination of benzoylurea insecticides in olive oil.

In this study, a novel method using a phosphonium-based deep eutectic solvent coupled with vortex-assisted liquid-liquid microextraction was investigated for the enrichment and separation of five benzoylurea insecticides in olive oil. The experimental factors affecting the extraction efficiency, including the extractant type, deep eutectic solvent volume, extraction time, and extraction mode, were optimized. Under optimal conditions, good linearity was observed for all target analytes, with correlation coefficients (r) ranging from 0.9971 to 0.9998; the limits of detection were in the range of 1.5 to 7.5 µg/L, and the recoveries of analytes using the proposed method ranged between 66.9 and 111.0%. The simple, rapid, and effective method was successfully applied for detecting target analytes in olive oil sample.

Preparation of magnetic attapulgite/polypyrrole nanocomposites for magnetic effervescence-assisted dispersive solid-phase extraction of pyrethroids from honey samples.

In this work, a novel extraction technique based on the effervescence-assisted dispersion and magnetic recovery of attapulgite/polypyrrole sorbents was developed for determining the concentrations of five pyrethroids in honey samples. The magnetic nanoparticles were synthesized by a one-pot method. Several experimental parameters that affected the extraction efficiency, including the dispersion conditions, pH, ionic strength, and desorption conditions, were investigated. Under optimal conditions, the calibration curves for the five pyrethroids in honey samples exhibited good linearity, with r2 values ranging from 0.9979 to 0.9990. The limits of detection varied between 0.21 and 0.34 µg/L. Satisfactory recoveries of 81.42-106.73% with intra- and interday relative standard deviations of less than 6.94 and 10.89%, respectively, were obtained. Moreover, the sorbents exhibited acceptable batch-to-batch repeatability in the range of 5.06-15.01%, and each sorbent could be reused for up to four extraction cycles without a significant loss in the extraction recovery.

Humic acid functionalized hyperbranched polytriazine based dispersive solid-phase extraction for acaricides determination in tea matrix.

Hyperbranched polytriazine functionalized with humic acid was prepared and developed as new sorbents for dispersive solid-phase extraction of three acaricides (clofentezine, fenpyroximate, and pyridaben) in tea samples combined with high-performance liquid chromatography detection. The sorbents were characterized by scanning electron microscopy, energy dispersive spectroscopy, Zeta-potential, and Fourier transform infrared spectroscopy. The extraction parameters (extraction time, ionic strength, desorption conditions) were optimized. The adsorption mechanism was evaluated utilizing Fourier transform infrared spectra. Under optimum conditions, satisfactory analytical performances were achieved, which included high precision (1.33-9.62%), low limits of detection (0.19-3.54 µg/L), and wide linear range (2.5-500 µg/L) for the analysis of the acaricides. Moreover, the proposed method proved highly effective for the determination of acaricides in tea samples, with the relative recoveries in the range of 65.20-108.13% and relative standard deviations < 9.87%. The method has great application potential for the detection of acaricides in tea samples.

Magnetic solid-phase extraction of benzoylurea insecticides in tea samples with Fe3 O4 -hyperbranched polyester magnetic composite as sorbent.

In this work, a method for the analysis of benzoylurea insecticides, including hexaflumuron, flufenoxuron, lufenuron and chlorfluazuron, in tea samples by high-performance liquid chromatography with Fe3 O4 -hyperbranched polyester nanocomposite as the adsorbent for magnetic solid-phase extraction was developed. The magnetic nanocomposite was prepared and characterized by infrared spectroscopy, vibrating sample magnetometry, and scanning electron microscopy. The as-prepared nanocomposite was used as a sorbent for the extraction and preconcentration of pesticide residues in tea samples. The extraction and desorption conditions, including mass ratios of raw materials, amount of sorbent, pH value, extraction time, and desorption time, were investigated. Under the final conditions chosen for the analysis, good linearity was obtained for all the tested compounds, with R2 values of at least 0.9979. The limits of detection were determined in the range of 0.15-0.3 µg/L. The recovery obtained from the analysis of tea samples with various spiked concentrations was between 90.7 and 98.4%, with relative standard deviations (n = 4) lower than 4.1%. Furthermore, the present approach was successfully applied to the quantitative determination of residues of benzoylurea insecticides in real samples.

Magnetic nanoparticles modified with hyperbranched polyamidoamine for the extraction of benzoylurea insecticides prior to their quantitation by HPLC.

A magnetic sorbent was fabricated by covalently grafting hyperbranched polyamidoamine onto the surface of Fe3O4 nanoparticles. The sorbent was used in the magnetic solid-phase extraction (MSPE) of benzoylurea insecticides (BUs) from environmental water samples. It is perceived that hydrogen bonding interactions and hydrophobic interactions are the main mechanisms for the adsorption of BUs. The sorbent was characterized by scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, elemental analysis, Brunauer-Emmett-Teller measurement, X-ray photoelectron spectroscopy, vibrating sample magnetometry and X-ray diffraction. Various experimental parameters affecting the MSPE were optimized. Following elution with acetonitrile, the BUs were quantified by HPLC with diode array detection. The method based has a wide linear response range (2.5-500.0 ng mL-1), satisfactory coefficient of determination (0.9922-0.9976), high enrichment factors (62.8-74.4), acceptable limits of quantitation (2.5 ng mL-1) and low limits of detection (0.39-0.72 ng mL-1). The intra-day precision at concentration levels of 5.0, 50.0 and 250.0 ng mL-1 ranged from 2.3-6.4% and the inter-day precision was between 1.0 and 5.5%. The sorbent can be re-used at least 15 times. It was applied to the extraction of BUs from genuine water samples where it showed satisfactory relative recoveries (75.1-111.4%) and precision (1.0-9.1%). Graphical abstract Schematic presentation of magnetic nanoparticles modified with hyperbranched polyamidoamine and their application for extraction of benzoylurea insecticides.

In situ solvent formation microextraction combined with magnetic dispersive micro-solid-phase extraction for the determination of benzoylurea insecticides in water samples.

A simple, fast, effective, and environmentally friendly method, in situ solvent formation microextraction combined with magnetic dispersive micro-solid-phase extraction for the determination of four benzoylurea insecticides is presented herein for the first time. In the proposed method, 1-hexyl-3-methylimidazolium bis[(trifluoromethane)sulfonyl]imide was formed by the reaction between 1-hexyl-3-methylimidazolium chloride and lithium bis[(trifluoromethane)sulfonyl]imide and was used to extract benzoylurea insecticides. Then magnetic nanoparticles were added as carrier to retrieve and separate the ionic liquid from the sample solution. After the supernatant was removed, the ionic liquid was desorbed using acetonitrile and subsequently injected directly into a high-performance liquid chromatograph equipped with a variable wavelength detector for analysis. The main factors affecting the extraction efficiency were investigated by a one factor at a time approach. Under optimized conditions, the proposed method showed good repeatability (RSD = 2.2-4.5%) and linearity (2-300 µg/L), with correlation coefficients greater than 0.9994 and low limits of detection (0.67-1.46 µg/L). Finally, the method was successfully applied to the analysis of four benzoylurea insecticides in environmental water samples with good recoveries (73.2-85.8%).

Ultrasound-assisted, hybrid ionic liquid, dispersive liquid-liquid microextraction for the determination of insecticides in fruit juices based on partition coefficients.

An ultrasound-assisted, hybrid ionic liquid, dispersive liquid-liquid microextraction method coupled to high-performance liquid chromatography with a variable-wavelength detector was developed to detect ten insecticides, including diflubenzuron, triflumuron, hexaflumuron, flufenoxuron, lufenuron, diafenthiuron, transfluthrin, fenpropathrin, γ-cyhalothrin and deltamethrin, in fruit juices. In this method, an appropriate extraction solvent was chosen based on the partition coefficient of the target compounds. A mixture of 1-octyl-2,3-dimethylimidazolium bis(trifluoromethylsulfonyl)imide and 1-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide was used as the extractant. The extraction efficiency was screened using Plackett-Burman design and optimized using central composite design. Under the optimal conditions, good linearity was obtained for all the analytes in the pure water model and the fruit juice samples. In pure water, the recoveries of the ten insecticides ranged from 85.7 to 108.9%, with relative standard deviations for one day ranging from 1.24 to 2.64%. The limits of detection were in the range of 0.19-0.69 µg/L, and the enrichment factors were in the range of 123-160. The logarithm of the n-octanol/water partition coefficient in this experiment is a useful reference to select a suitable extraction solvent, and the proposed technique was applied for the analysis of ten insecticides in fruit juice with satisfactory results.

Dispersive liquid-liquid microextraction based on the solidification of deep eutectic solvent for the determination of benzoylureas in environmental water samples.

We present a novel dispersive liquid-liquid microextraction method based on the solidification of deep eutectic solvent coupled with high-performance liquid chromatography with a variable-wavelength detection for the detection of five benzoylureas in real water samples. In this work, a green solvent consisting of 1-octyl-3-methylimidazolium chloride and 1-dodecanol was used as an extraction solvent, yielding the advantages of material stability, low density, and a suitable freezing point near room temperature. Parameters that significantly affect extraction efficiency were optimized by the one-factor-at-a-time approach. Under optimal conditions, the recoveries of five target compounds were obtained ranging from 87.39 to 98.05% with correlation coefficients ranging from 0.9994 to 0.9997 for pure water. The limits of detection were in the range of 0.09-0.16 µg/L. The enrichment factors were in the range of 171-188. Linearities were achieved in the range of 0.5-500 µg/L. The proposed method was successfully applied to determine benzoylureas in environmental water samples with a satisfactory recovery of approximately 81.38-97.67%.

Pipette vial dispersive liquid-liquid microextraction combined with high-performance liquid chromatography for the determination of benzoylurea insecticide in fruit juice.

A simple, sensitive, and efficient method of using a pipette vial to perform dispersive liquid-liquid microextraction based on the solidification of floating organic droplets was coupled with high-performance liquid chromatography (HPLC) and a diode array detector for the preconcentration and analysis of four benzoylurea insecticides in fruit juice. In this method, 1-dodecanol was used as an extractant, and a snipped pipette was used as an experimental vial to simplify the procedure of collecting and separating solidified extractant. The experimental parameters were optimized using a Plackett-Burman design and one-factor-at-a-time method. Under the optimal conditions in the water model, the limits of detection for analytes varied from 0.03 to 0.28 µg/L, and the enrichment factors ranged from 147 to 206. Linearity was achieved for diflubenzuron and flufenoxuron in a range of 0.5-500 µg/L, for hexaflumuron in a range of 1-500 µg/L, and for triflumuron in a range of 5-500 µg/L. The correlation coefficients for the analytes ranged from 0.9986 to 0.9994 with recoveries of 91.4-110.9%. Finally, the developed technique was successfully applied to fruit juice samples with acceptable results. The relative standard deviations of the analytes at two spiking levels (50 and 200 µg/L) varied between 0.2 and 4.5%.

Dispersive micro-solid-phase extraction of benzoylurea insecticides in honey samples with a ß-cyclodextrin-modified attapulgite composite as sorbent.

A ß-cyclodextrin-modified attapulgite composite was prepared and used as a dispersive micro-solid-phase extraction sorbent for the determination of benzoylurea insecticides in honey samples. Parameters that may influence the extraction efficiency, such as the type and volume of the eluent, the amount of the sorbent, the extraction time and the ionic strength were investigated and optimized using batch and column procedures. Under optimized conditions, good linearity was obtained for all of the tested compounds, with R(2) values of at least 0.9834. The limits of detection were determined in the range of 0.2-1.0 µg/L. The recoveries of the four benzoylurea insecticides in vitex honey and acacia honey increased from 15.2 to 81.4% and from 14.2 to 82.0%, respectively. Although the ß-cyclodextrin-modified attapulgite composite did not show a brilliant adsorption capacity for the selected benzoylurea insecticides, it exhibited a higher adsorption capacity toward relatively hydrophobic compounds, such as chlorfluazuron and hexaflumuron (recoveries in vitex honey samples ranged from 70.0 to 81.4% with a precision of 1.0-3.7%). It seemed that the logPow of the benzoylurea insecticides is related to their recoveries. The results confirmed the possibility of using cyclodextrin-modified palygorskite in the determination of relatively hydrophobic trace pharmaceutical residues.

Effervescence-assisted dispersive solid-phase extraction using ionic-liquid-modified magnetic ß-cyclodextrin/attapulgite coupled with high-performance liquid chromatography for fungicide detection in honey and juice.

In this study, a simple effervescence-assisted dispersive solid-phase extraction method was developed to detect fungicides in honey and juice. Most significantly, an innovative ionic-liquid-modified magnetic ß-cyclodextrin/attapulgite sorbent was used because its large specific surface area enhanced the extraction capacity and also led to facile separation. A one-factor-at-a-time approach and orthogonal design were employed to optimize the experimental parameters. Under the optimized conditions, the entire extraction procedure was completed within 3 min. In addition, the calibration curves exhibited good linearity, and high enrichment factors were achieved for pure water and honey samples. For the honey samples, the extraction efficiencies for the target fungicides ranged from 77.0 to 94.3% with relative standard deviations of 2.3-5.44%. The detection and quantitation limits were in the ranges of 0.07-0.38 and 0.23-1.27 µg/L, respectively. Finally, the developed technique was successfully applied to real samples, and satisfactory results were achieved. This analytical technique is cost-effective, environmentally friendly, and time-saving.

Optimization of dispersive liquid-liquid microextraction based on the solidification of floating organic droplets using an orthogonal array design and its application for the determination of fungicide concentrations in environmental water samples.

A dispersive liquid-liquid microextraction method based on the solidification of floating organic droplets was developed as a simple and sensitive method for the simultaneous determination of the concentrations of multiple fungicides (triazolone, chlorothalonil, cyprodinil, and trifloxystrobin) in water by high-performance liquid chromatography with variable-wavelength detection. After an approach varying one factor at a time was used, an orthogonal array design [L25 (5(5))] was employed to optimize the method and to determine the interactions between the parameters. The significance of the effects of the different factors was determined using analysis of variance. The results indicated that the extraction solvent volume significantly affects the efficiency of the extraction. Under optimal conditions, the relative standard deviation (n = 5) varied from 2.3 to 5.5% at 0.1 µg/mL for each analyte. Low limits of detection were obtained and ranged from 0.02 to 0.2 ng/mL. In addition, the proposed method was applied to the analysis of fungicides in real water samples. The results show that the dispersive liquid-liquid microextraction based on the solidification of floating organic droplets is a potential method for detecting fungicides in environmental water samples, with recoveries of the target analytes ranging from 70.1 to 102.5%.

Nonwoven polypropylene as a novel extractant phase holder for the determination of insecticides in environmental water samples.

In this work, a novel liquid-phase microextraction approach using nonwoven polypropylene as the extraction solvent holder was developed. Nonwoven polypropylene, a hydrophobic material, is widely used in the cleanup of oil spills. Due to its large surface area, efficient, and full extraction can be achieved. Nonwoven polypropylene containing an ionic liquid was used to extract benzoylurea insecticides (diflubenzuron, teflubenzuron, flufenoxuron, and chlorfluazuron) through vortex-assisted liquid-liquid microextraction. The parameters that affected the extraction efficiency included the type and volume of the extractant, the extraction time, the time and solvent volume for desorption and the mass and surface area of the nonwoven polypropylene. Under the optimized conditions, good linearity was obtained, with coefficients of determination greater than 0.9996, and the limit of detections of these compounds, calculated at S/N = 3, were in the range of 0.73-5.0 ng/mL. The recoveries of the four insecticides at two spiked levels ranged from 93.3 to 102.0%, with relative standard deviations of less than 4.0%. The proposed method was then successfully used for the rapid determination of benzoylurea insecticides in spiked real water samples before liquid chromatographic analysis. The procedure is simple, inexpensive, easy to execute, and can be widely used.