Blueberry anthocyanins improve liver fibrosis by regulating NCOA4 ubiquitination through TRIM7 to affect ferroptosis of hepatic stellate cells.

This study aims to investigate the role and molecular mechanism of anthocyanin in improving liver fibrosis through ferroptosis, providing a basis for drug development and targeted therapy. In this study, a mouse model of liver fibrosis was established using CCl4, and the anthocyanin treatment groups were administered 100 mg/kg anthocyanin daily via gavage. Furthermore, real-time fluorescent quantitative PCR (qRT-PCR), Western blotting (WB), and enzyme-linked immunosorbent assay were used to assess liver fibrosis indicators and liver injury markers. Histopathological methods were used to confirm the morphology of liver injury in different treatment groups. The effects of anthocyanins on ferroptosis markers, NCOA4 and FTH1 expression, were examined through qRT-PCR, WB, and Co-IP. Confocal microscopy was used to validate the colocalization of ferritin and lysosomes. A differential expression model of TRIM7 was constructed to verify its impact on the progression of liver fibrosis. The present study demonstrates the hepatoprotective effects of anthocyanins in liver fibrosis, highlighting their ability to enhance hepatic stellate cell (HSC) ferroptosis and regulate ferritin autophagy. Moreover, TRIM7 is identified as a key mediator of anthocyanin-induced regulation of hepatic stellate cells activation for liver fibrosis treatment through modulation of ferroautophagy. Mechanistic investigations further reveal that TRIM7 exerts its influence on the process of ferroautophagy by controlling NCOA4 ubiquitination. Our study discovered that anthocyanins could improve liver fibrosis by regulating NCOA4 ubiquitination through TRIM7, thereby affecting hepatic stellate cells' ferroptosis levels.NEW & NOTEWORTHY This was the first study to demonstrate that anthocyanins can improve the progression of liver fibrosis by promoting hepatic stellate cell (HSC) ferroptosis. Anthocyanins could affect the content of Fe2+ by promoting ferroautophagy in HSCs, thereby promoting the level of ferroptosis. This study demonstrates for the first time that anthocyanins can inhibit the expression of TRIM7 and then affect the ubiquitination of NCOA4 to regulate the level of ferritin autophagy and ferroptosis.

NBR1-mediated autophagic degradation of caspase 8 protects vascular endothelial cells against arsenite-induced apoptotic cell death.

Vascular endothelial cells play a critical role in maintaining the health of blood vessels, but dysfunction can lead to cardiovascular diseases. The impact of arsenite exposure on cardiovascular health is a significant concern due to its potential adverse effects. This study aims to explore how NBR1-mediated autophagy in vascular endothelial cells can protect against oxidative stress and apoptosis induced by arsenite. Initially, our observations revealed that arsenite exposure increased oxidative stress and triggered apoptotic cell death in human umbilical vein endothelial cells (HUVECs). However, treatment with the apoptosis inhibitor Z-VAD-FMK notably reduced arsenite-induced apoptosis. Additionally, arsenite activated the autophagy pathway and enhanced autophagic flux in HUVECs. Interestingly, inhibition of autophagy exacerbated arsenite-induced apoptotic cell death. Our findings also demonstrated the importance of autophagy receptor NBR1 in arsenite-induced cytotoxicity, as it facilitated the recruitment of caspase 8 to autophagosomes for degradation. The protective effect of NBR1 against arsenite-induced apoptosis was compromised when autophagy was inhibited using pharmacological inhibitors or through genetic knockdown of essential autophagy genes. Conversely, overexpression of NBR1 facilitated caspase 8 degradation and reduced apoptotic cell death in arsenite-treated HUVECs. In conclusion, our study highlights the vital role of NBR1-mediated autophagic degradation of caspase 8 in safeguarding vascular endothelial cells from arsenite-induced oxidative stress and apoptotic cell death. Targeting this pathway could offer a promising therapeutic approach to mitigate cardiovascular diseases associated with arsenite exposure.

Population pharmacokinetics of cyclosporine A in pediatric patients with thalassemia undergoing allogeneic hematopoietic stem cell transplantation.

PURPOSE: To establish the population pharmacokinetics (PPK) model of cyclosporine A(CsA) in pediatric patients with thalassemia undergoing allogeneic hematopoietic stem cell transplantation (HSCT), aiming at providing a reference for clinical dose individualization of CsA. METHODS: Children with thalassemia who underwent allogeneic HSCT were enrolled retrospectively. The PPK structural model and the random variable model of CsA were established on NONMEN. And goodness of fit plots (GOFs), visual predictive check (VPC), and bootstrap and normalized prediction distribution errors (NPDE) were used to evaluate the final model. RESULTS: A one-compartment model with first-order absorption was employed to fit the base model. A total of 74 pediatric patients and 600 observations of whole blood concentration were included. The final model included weight (WT) in clearance (CL), alongside post-operative day (POD), fluconazole (FLUC), voriconazole (VORI), posaconazole (POSA), and red blood cell count (RBC) significantly. All the model evaluations were passed. CONCLUSION: In the PPK model based on the pediatric cohort on CsA with thalassemia undergoing allogeneic HSCT, WT, POD, FLUC, VORI, POSA, and RBC were found to be the significant factors influencing CL of CsA. The reliability and robustness of the final model were excellent. It is expected that the PPK model can assist in individualizing dosing strategy clinically.

Design and synthesis of sulfonamide phenothiazine derivatives as novel ferroptosis inhibitors and their therapeutic effects in spinal cord injury.

Ferroptosis is a novel style of cell death, and studies have shown that ferroptosis is strongly associated with spinal cord injury (SCI). A large number of ferroptosis inhibitors have been reported, but so far no ferroptosis inhibitor has been used clinically. Therefore there is an urgent need to discover a better inhibitor of ferroptosis. In this study, 24 novel sulfonamide phenothiazine ferroptosis inhibitors were designed and synthesized, followed by structure-activity relationship studies on these compounds. Among them, compound 23b exhibited the best activity in Erastin-induced PC12 cells (EC50 = 0.001 µM) and demonstrated a low hERG inhibition activity (IC50 > 30 µM). Additionally, compound 23b was identified as a ROS scavenger and showed promising therapeutic effects in an SD rat model of SCI. Importantly, 23b did not display significant toxicity in both in vivo and in vitro experiments and show good pharmacokinetic properties. These findings suggest that compound 23b, a novel ferroptosis inhibitor, holds potential as a therapeutic agent for spinal cord injury and warrants further investigation.

The influence of bone block graft position on bone dimensional changes in staged onlay horizontal ridge augmentation: A 6-month retrospective cohort study.

OBJECTIVES: To analyze changes in bone dimensions and their modulating factor in bone dimensions 6 months after horizontal ridge augmentation using autogenous bone grafts. MATERIALS AND METHODS: Thirty-eight patients with horizontally atrophic alveolar ridges of a single edentulous tooth at the maxillary anterior site were divided into two groups based on the fixation position of the bone block during ridge augmentation surgery (H0, vertical distance from the upper edge of the bone block to the alveolar crest). Patients were classified into a crestal level (CL) group if H0 ≤ 1 mm and a sub-crestal level (SCL) group if H0 > 1 mm. The width and height of the alveolar ridge were recorded using CBCT both before and 6 months after the augmentation procedure. RESULTS: The CL group comprised 20 patients with 23 implants, whereas the SCL group comprised 18 patients with 22 implants. All the augmentation sites exhibited vertical bone resorption. Vertical bone resorption in the SCL group (1.94 ± 2.11 mm) was significantly higher than that of the CL group (0.61 ± 0.64 mm). The SCL group showed significantly lower horizontal bone gain than the CL group (SCL: 1.02 ± 2.30 mm; CL: 3.19 ± 3.17 mm) at the cervical level. Peri-implant marginal bone loss increased significantly in the SCL group (1.00 ± 2.71 mm) compared to the CL group (0.64 ± 0.40 mm). CONCLUSION: The bone height decreased after horizontal ridge augmentation using autogenous onlay grafting. The fixation position of the bone block was a modulating factor. The SCL group showed more vertical bone loss, less horizontal bone gain 6 months after surgery, and more marginal bone loss after restoration.

Natural Sequential Collapse Method: A Common Technique to Identify the Intersegmental Plane.

The natural sequential collapse method (NSCM) can be employed during surgery to reduce the duration of segmentectomy. This method avoids inflating the lung by rapidly blocking vessels within the tumor basin. It is important to note that the color of the lungs should be used to determine the surgical procedure. The NSCM is efficient and straightforward in revealing the intersegmental plane.

Dually Amplified Electrochemical Aptasensor for Endotoxin Detection via Target-Assisted Electrochemically Mediated ATRP.

As the entering of bacterial endotoxin into blood can cause various life-threatening pathological conditions, the screening and detection of low-abundance endotoxin are of great importance to human health. Taking advantage of signal amplification by target-assisted electrochemically mediated atom transfer radical polymerization (teATRP), we illustrate herein a simple and cost-effective electrochemical aptasensor capable of detecting endotoxin with high sensitivity and selectivity. Specifically, the aptamer receptor was employed for the selective capture of endotoxin, of which the glycan chain was then decorated with ATRP initiators via covalent coupling between the diol sites and phenylboronic acid (PBA) group, followed by the recruitment of ferrocene signal reporters via the grafting of polymer chains through potentiostatic eATRP under ambient temperature. As the glycan chain of endotoxin can be decorated with hundreds of ATRP initiators while the further grafting of polymer chains through eATRP can recruit hundreds to thousands of signal reporters to each initiator-decorated site, the teATRP-based strategy allows for the dual amplification of the detection signal. This dually amplified electrochemical aptasensor has the ability to sensitively and selectively detect endotoxin at a concentration as low as 1.2 fg/mL, and its practical applicability has been further demonstrated using human serum samples. Owing to the simplicity, high efficiency, biocompatibility, and inexpensiveness of the teATRP-based amplification strategy, this electrochemical aptasensor holds great application potential in the sensitive and selective detection of low-abundance endotoxin and many other glycan chain-containing bio-targets.

Charge-Assisted Hydrogen-Bonded Organic Frameworks with Inorganic Ammonium Regulated Switchable Open Polar Sites.

Surface open polar sites within the voids of porous molecular crystals define the localized physicochemical environment for critical functions such as gas separation and molecular recognition. This study presents a new charge-assisted hydrogen bonding (H-bonding) motif, by exploiting inorganic ammonium (NH4 + ) cations as H-bond donors, to regulate the assembly of C2 -symmetric carboxylic tectons for building robust H-bonded frameworks with permanent ultra-micropores and open oxygen sites. Diverse building blocks are bridged by tetrahedral NH4 + to expand distinctive H-bonded networks with varied pore architectures. Particularly, the open polar oxygen sites can be switched by altering NH4 + sources to tune the deprotonation of carboxyl-containing tectons. The activated porous PTBA·NH4 ·DMF preserves the pore architecture and open polar oxygen sites, exhibiting remarkably selective sorption of CO2 (107.8 cm3 g-1 ,195 K) over N2 (11.2 cm3 g-1 , 77 K) and H2 (1.4 cm3 g-1 , 77 K).

Hydrogen-Bonded Organic Frameworks: Structural Design and Emerging Applications.

Constructing well-organized organic frameworks with tailor-made functionalities potentially boost multi-domain applications. Hydrogen bonding (H-bonding) is a category of general and weak intermolecular interactions when compared with covalent bonding or metal-ligand coordination. Porous frameworks mainly assembled by H-bonding (named hydrogen-bonded organic frameworks, HOFs) are intrinsically capable of decomposing and regenerating, a distinctive advantage to improve their processability while expanding the applicability. This paper summarizes the basic building concepts of HOFs, including feasible hydrogen bonded motifs, effective molecular structures, and their emerging applications.

Periodontitis-induced oral microbiome alterations provide clues on how periodontitis exacerbates colitis.

AIM: To evaluate whether and how microbiota-derived metabolites associated with periodontitis aggravate colitis in mice. MATERIALS AND METHODS: A mouse model of periodontitis and colitis was constructed. Unbiased transcriptomic analyses of the colon were performed to explore important pathways through which periodontitis exacerbated colitis. Oral and gut bacteria were analysed using 16S rRNA sequencing. Gas chromatography-mass spectrometry was used to observe the alterations of oral and gut metabolites. Isolated intestinal lamina propria lymphocytes were analysed by flow cytometry. Inflammasome pathway was detected using qRT-PCR, Western blotting or ELISA. RESULTS: Periodontitis activated the colonic inflammasome pathway and altered the gut microbial composition and metabolite profiles in mice with colitis. Notably, periodontitis induced increase of the faecal metabolite isoleucine (Ile) which was synthesized by microbiota and plants. Moreover, periodontitis upregulated the Ile levels in saliva, but not in serum, indicating that Ile might be an oral pathobiont-synthesizing metabolite that transited from the oral cavity to the gut. Ile triggered the inflammasome pathway, upregulated the number of inflammatory IL-1ßhigh MHCIIhigh Ly6Chigh monocytes in colonic lamina propria, and exacerbated colitis. Further studies found that the Ile metabolite acetyl-coenzyme A positively regulated NLRP3 inflammasome by KAT5-mediated acetylation of NLRP3. CONCLUSIONS: Our study revealed that alteration in periodontitis-induced microbial metabolites deteriorated colitis in a mouse model and that this was associated with Ile production.

Electrochemically Controlled Atom Transfer Radical Polymerization for Electrochemical Aptasensing of Tumor Biomarkers.

Tumor biomarkers are of great value in the liquid biopsy of malignant tumors. In this work, a simple and cost-friendly electrochemical aptasensor was presented for the highly sensitive and selective detection of glycoprotein tumor biomarkers. The DNA aptamer-modified electrode was used as the sensing interface to specifically capture the target glycoprotein tumor biomarkers, to which the alkyl halide initiators for atom transfer radical polymerization (ATRP) were then attached via the esterification crosslinking between the boronic acid group and the cis-dihydroxyl sites of the conjugated oligosaccharide chains on glycoprotein tumor biomarkers followed by the growth of long-chain polymers through electrochemically controlled ATRP (eATRP) to efficiently recruit the ferrocene detection tags. As there are tens to hundreds of cis-dihydroxyl sites on a glycoprotein tumor biomarker for attaching ATRP initiators while each long-chain polymer can recruit hundreds to thousands of ferrocene detection tags, a significantly high current signal can be generated even in the presence of ultralow-abundance targets. Hence, the eATRP-based electrochemical aptasensor is capable of sensitively and selectively detecting glycoprotein tumor biomarkers. Using alpha-fetoprotein as the model target, the limit of detection was demonstrated to be 0.32 pg/mL. Moreover, the aptasensor has been successfully applied to detect glycoprotein tumor biomarkers in human serum samples. In view of its high sensitivity and selectivity, simple operation, and cost-friendliness, the eATRP-based electrochemical aptasensor shows great promise in the glycoprotein-based liquid biopsy of malignant tumors, even at the early stage of development.

Boronate-Affinity Cross-Linking-Based Ratiometric Electrochemical Detection of Glycoconjugates.

Despite the widespread application of the boronate-affinity cross-linking (BAC) in the separation, enrichment, and sensing of glycoconjugates, it remains a huge challenge to integrate the BAC into the selective electrochemical detection of glycoconjugates due to the poor selectivity of the BAC. Herein, we demonstrate a BAC-based ratiometric electrochemical method for the simple, low-cost, and highly sensitive and selective detection of glycoconjugates. Briefly, the methylene blue (MB)-tagged nucleic acid aptamer is exploited as the recognition element to selectively capture target glycoconjugate, to which a large number of ferrocene (Fc) tags are subsequently labeled via the BAC between the phenylboronic acid (PBA) group and the cis-diol site of the oligosaccharide chains on the captured targets. Using the MB tag as the internal reference and the Fc tag as the reporter of the target capture, the dual-signal output enables the ratiometric detection. Due to the presence of a high density of the cis-diol sites on a glycoconjugate, sufficiently high sensitivity can be obtained even without using any amplification strategies. Using glycoprotein mucin 1 (MUC1) as the model target, the signal ratio (IFc/IMB) exhibits good linearity over the range from 0.05 to 50 U/mL, with a detection limit of 0.021 U/mL. In addition to the high sensitivity and selectivity, the results of the analysis of MUC1 in serum samples are acceptable. By virtue of its simplicity, cost-effectiveness, and high robustness and reproducibility, this BAC-based ratiometric electrochemical method holds great promise in the highly sensitive and selective detection of glycoconjugates.

Biologically Mediated RAFT Polymerization for Electrochemical Sensing of Kinase Activity.

The assay of kinase activity with ultrahigh sensitivity is important to medical diagnostics and drug discovery. Herein, we report the biologically mediated RAFT polymerization (BMRP) and its potential use as an efficient amplification strategy in the ultrasensitive electrochemical sensing of kinase activity. In BMRP, the reversible addition-fragmentation chain-transfer (RAFT) process is initiated and sustained by the reduced form of coenzyme I (i.e., NADH), which can efficiently mediate the direct fragmentation of thiocarbonylthio (TCT) compounds (or the TCT-capped dormant chains) to produce an initiating/propagating radical under mild conditions. Due to the absence of exogenous radicals, the notorious radical termination in RAFT equilibrium can be greatly suppressed. For the sensing of kinase activity, the recognition peptides, without carboxyl groups, are immobilized via the Au-S self-assembly. After phosphorylation, TCT compounds (as RAFT agents) are tethered to the enzymatically generated phosphate groups via the carboxylate-Zr(IV)-phosphate (CZP) linkage. Subsequently, the BMRP of ferrocenylmethyl methacrylate (FcMMA) results in the labeling of each phosphate group with hundreds to thousands of Fc tags, thereby greatly amplifying the sensing signal. Obviously, the BMRP-based strategy is biologically friendly, highly efficient, uncomplicated, and quite low-cost. The detection limit of 1.85 mU/mL has been achieved toward the selective sensing of the cAMP-dependent protein kinase (PKA). Moreover, the proposed kinase sensor is applicable to inhibitor screening and kinase activity sensing in serum samples. By virtue of its low cost, high sensitivity and selectivity, and uncomplicated operation, the proposed kinase sensor holds great potential in medical diagnostics and drug discovery.

Boronate Affinity-Amplified Electrochemical Aptasensing of Lipopolysaccharide.

As lipopolysaccharide (LPS) is closely associated with sepsis and other life-threatening conditions, the point-of-care (POC) detection of LPS is of significant importance to human health. In this work, we illustrate an electrochemical aptasensor for the POC detection of low-abundance LPS by utilizing boronate affinity (BA) as a simple, efficient, and cost-effective amplification strategy. Briefly, the BA-amplified electrochemical aptasensing of LPS involves the tethering of the aptamer receptors and the BA-mediated direct decoration of LPS with redox signal tags. As the polysaccharide chain of LPS contains hundreds of cis-diol sites, the covalent crosslinking between the phenylboronic acid group and cis-diol sites can be harnessed for the site-specific decoration of each LPS with hundreds of redox signal tags, thereby enabling amplified detection. As it involves only a single-step operation (∼15 min), the BA-mediated signal amplification holds the significant advantages of unrivaled simplicity, rapidness, and cost-effectiveness over the conventional nanomaterial- and enzyme-based strategies. The BA-amplified electrochemical aptasensor has been successfully applied to specifically detect LPS within 45 min, with a detection limit of 0.34 pg/mL. Moreover, the clinical utility has been validated based on LPS detection in complex serum samples. As a proof of concept, a portable device has been developed to showcase the potential applicability of the BA-amplified electrochemical LPS aptasensor in the POC testing. In view of its simplicity, rapidness, and cost-effectiveness, the BA-amplified electrochemical LPS aptasensor holds broad application prospects in the POC testing.

Electrochemical Detection of Femtomolar DNA via Boronate Affinity-Mediated Decoration of Polysaccharides with Electroactive Tags.

In view of their high efficiency and cost-effectiveness, polymers are of great promise as carriers for signal tags in amplified detection. Herein, we present a polysaccharide-amplified method for the electrochemical detection of a BRCA1 breast cancer gene-derived DNA target at the femtomolar levels. Briefly, peptide nucleic acid (PNA) with a complementary sequence was tethered as the capture probe for the DNA target, to which carboxyl group-containing polysaccharides were then attached via facile phosphate-Zr(IV)-carboxylate crosslinking, followed by the decoration of polysaccharide chains with electroactive ferrocene (Fc) signal tags via affinity coupling between a cis-diol site and phenylboronic acid (PBA) group. As the polysaccharide chain contains hundreds of cis-diol sites, boronate affinity can enable the site-specific decoration of each polysaccharide chain with hundreds of Fc signal tags, efficiently transducing each target capture event into the decoration of many Fc signal tags. As polysaccharides are cheap, renewable, ubiquitous, and biodegradable natural biopolymers, the use of polysaccharides for signal amplification offers the benefits of high efficiency, cost-effectiveness, excellent biocompatibility, and environmental friendliness. The linear range of the polysaccharide-amplified method for DNA detection was demonstrated to be from 10 fM to 10 nM (R2 = 0.996), with the detection limit as low as 2.9 fM. The results show that this method can also discriminate single base mismatch with satisfactory selectivity and can be applied to DNA detection in serum samples. In view of these merits, the polysaccharide-amplified PNA-based electrochemical method holds great promise in DNA detection with satisfactory sensitivity and selectivity.

Boronate Affinity-Based Electrochemical Aptasensor for Point-of-Care Glycoprotein Detection.

As a class of oligosaccharide chain-containing proteins, glycoproteins are of great value in screening and early diagnosis of malignant tumors and other major diseases. Herein, we report a universal boronate affinity-based electrochemical aptasensor for point-of-care glycoprotein detection. Aptasensing of glycoproteins involves the specific recognition and capture of target glycoproteins by end-tethered nucleic acid aptamers and the site-specific labeling of ferrocene tags via the phenylboronic acid (PBA)-based boronate affinity interactions because the cis-diol sites of oligosaccharide chains on glycoproteins can selectively react with the PBA receptor groups to form cyclic phenylborates in aqueous basic media. Due to the presence of hundreds to thousands of cis-diol sites on a glycoprotein, a large number of ferrocene tags can be recruited for the signal-on aptasensing of glycoproteins at a low-abundance level, eliminating the need for extra amplification strategies. As a result, the boronate affinity-based electrochemical aptasensor is highly sensitive and selective for glycoprotein detection and tolerant to the false-positive results. The detection limit for α-fetoprotein (AFP) is 0.037 ng/mL, with a linear response ranging from 0.1 to 100 ng/mL. In addition to the merits of simple operation, short assay time, and low detection cost, the aptasensor is applicable to the detection of glycoproteins in serum samples and the point-of-care detection using disposable flexible electrodes. Overall, this work provides a universal and promising platform for the point-of-care detection of glycoproteins, holding great potential in screening and early diagnosis of glycoprotein-related malignant tumors and other major diseases.

Three-dimensional virtual refocusing of fluorescence microscopy images using deep learning.

We demonstrate that a deep neural network can be trained to virtually refocus a two-dimensional fluorescence image onto user-defined three-dimensional (3D) surfaces within the sample. Using this method, termed Deep-Z, we imaged the neuronal activity of a Caenorhabditis elegans worm in 3D using a time sequence of fluorescence images acquired at a single focal plane, digitally increasing the depth-of-field by 20-fold without any axial scanning, additional hardware or a trade-off of imaging resolution and speed. Furthermore, we demonstrate that this approach can correct for sample drift, tilt and other aberrations, all digitally performed after the acquisition of a single fluorescence image. This framework also cross-connects different imaging modalities to each other, enabling 3D refocusing of a single wide-field fluorescence image to match confocal microscopy images acquired at different sample planes. Deep-Z has the potential to improve volumetric imaging speed while reducing challenges relating to sample drift, aberration and defocusing that are associated with standard 3D fluorescence microscopy.

Horizontal ridge augmentation in the anterior maxilla with in situ onlay bone grafting: a retrospective cohort study.

OBJECTIVES: This study aimed to introduce a digitally guided in situ autogenous onlay grafting technique and compare its effectiveness with the conventional (ex situ) onlay technique in augmenting horizontal bone defects of the anterior maxilla. MATERIALS AND METHODS: This retrospective cohort study included 24 patients who had received autogenous onlay bone grafts combined with guided bone regeneration (GBR) in the anterior maxilla. Fourteen patients were recruited into the in situ onlay grafting group (EG), and 10 were recruited into the ex situ onlay group (CG), defined by the donor sites. The clinical parameters, radiographic changes, micro-CT, and histological processes were evaluated after a mean follow-up period of 1.7 years. RESULTS: The horizontal bone width reflected significant bone modeling over time (p < 0.001) in the first 6 months. Multivariable analysis showed that the treatment modality (grouping) was a critical factor positively associated with vertical bone height alteration. However, neither the alteration rate of horizontal bone width nor the bone volume was associated with the treatment modality. The number of periosteal screws per graft positively affected horizontal contour maintenance (p < 0.05). No significant differences were observed between the groups in the clinical parameters (complications, success rate, and peri-implant parameters). The micro-CT and histological outcomes were similar between the groups. CONCLUSION: Despite the limitations of this study, in situ onlay grafting combined with GBR was an effective and reliable approach for horizontal bone augmentation in the anterior maxilla and appeared to demonstrate better stability in vertical bone remodeling. CLINICAL RELEVANCE: This study introduces a modified and minimally invasive technique of onlay grafting for horizontal bone augmentation. This in situ onlay grafting demonstrates superior stability in vertical bone remodeling. The trial registration number is ChiCTR2100054683.

Machine-learning based radiogenomics analysis of MRI features and metagenes in glioblastoma multiforme patients with different survival time.

BACKGROUND: This study aimed to examine multi-dimensional MRI features' predictability on survival outcome and associations with differentially expressed Genes (RNA Sequencing) in groups of glioblastoma multiforme (GBM) patients. METHODS: Radiomics features were extracted from segmented lesions of T2-FLAIR MRI data of 137 GBM patients. Radiomics features include intensity, shape and textural features in seven classes were included in the analysis. Patients were divided into two groups depending on their survival time (shorter or longer than 1-year survival). Four different machine learning algorithms were implemented to construct the prediction models. Features with top importance (importance >0.04) were selected to construct the prediction model using the model with the best performance. The interactions between image features and genomics were then analysed with Pearson's correlation analysis. RESULTS: The GBDT model with 72 features with highest importance had the highest accuracy of 0.81 on both short and long survival time classes, and the area under the curve (AUC) of the receiver operative characteristic (ROC) of the short and long survival time class were 0.79 and 0.81. Six metagenes showed significant interactive effect (P < 0.05), and Pearson's correlation analysis revealed that three of these metagenes (TIMP1, ROS1 EREG) showed moderate (0.3 < |r| < 0.5) or high correlation (|r| > 0.5) with image features. CONCLUSION: Radiogenomics analysis shows that MRI features are predictive of survival outcomes, and image features are highly associated with selective metagenes. Radiogenomics analysis is a useful method for optimizing clinical diagnosis and selecting effective treatments.

Label-free brainwide visualization of senile plaque using cryo-micro-optical sectioning tomography.

Optical visualization of pathological changes in Alzheimer's disease (AD) can facilitate exploration of disease mechanisms and treatments. However, existing optical imaging methods have limitations on mapping pathological evolution in the whole mouse brain. Previous research indicated endogenous fluorescence contrast of senile plaques. Therefore, we develop cryo-micro-optical sectioning tomography (cryo-MOST) to capture intrinsic fluorescence distribution of senile plaques at a micrometer-level resolution in the whole brain. Validation using immunofluorescence demonstrates the capacity of cryo-MOST to visualize and distinguish senile plaques with competent sensitivity and spatial resolution. Compared with imaging in room temperature, cryo-MOST provides better signal intensity and signal-to-noise ratio. Using cryo-MOST, we obtained whole-brain coronal distribution of senile plaques in a transgenic mouse without exogenous dye. Capable of label-free brainwide visualization of Alzheimer's pathology, cryo-MOST may be potentially useful for understanding neurodegenerative disease mechanisms and evaluating drug efficacy.