RESUMEN
Earth's inner core (IC) is less dense than pure iron, indicating the existence of light elements within it1. Silicon, sulfur, carbon, oxygen and hydrogen have been suggested to be the candidates2,3, and the properties of iron-light-element alloys have been studied to constrain the IC composition4-19. Light elements have a substantial influence on the seismic velocities4-13, the melting temperatures14-17 and the thermal conductivities18,19 of iron alloys. However, the state of the light elements in the IC is rarely considered. Here, using ab initio molecular dynamics simulations, we find that hydrogen, oxygen and carbon in hexagonal close-packed iron transform to a superionic state under the IC conditions, showing high diffusion coefficients like a liquid. This suggests that the IC can be in a superionic state rather than a normal solid state. The liquid-like light elements lead to a substantial reduction in the seismic velocities, which approach the seismological observations of the IC20,21. The substantial decrease in shear-wave velocity provides an explanation for the soft IC21. In addition, the light-element convection has a potential influence on the IC seismological structure and magnetic field.
RESUMEN
High pressure induces dramatic changes and novel phenomena in condensed volatiles1,2 that are usually not preserved after recovery from pressure vessels. Here we report a process that pressurizes volatiles into nanopores of type 1 glassy carbon precursors, converts glassy carbon into nanocrystalline diamond by heating and synthesizes free-standing nanostructured diamond capsules (NDCs) capable of permanently preserving volatiles at high pressures, even after release back to ambient conditions for various vacuum-based diagnostic probes including electron microscopy. As a demonstration, we perform a comprehensive study of a high-pressure argon sample preserved in NDCs. Synchrotron X-ray diffraction and high-resolution transmission electron microscopy show nanometre-sized argon crystals at around 22.0 gigapascals embedded in nanocrystalline diamond, energy-dispersive Xray spectroscopy provides quantitative compositional analysis and electron energy-loss spectroscopy details the chemical bonding nature of high-pressure argon. The preserved pressure of the argon sample inside NDCs can be tuned by controlling NDC synthesis pressure. To test the general applicability of the NDC process, we show that high-pressure neon can also be trapped in NDCs and that type 2 glassy carbon can be used as the precursor container material. Further experiments on other volatiles and carbon allotropes open the possibility of bringing high-pressure explorations on a par with mainstream condensed-matter investigations and applications.
RESUMEN
Ferromagnesian silicates are the dominant constituents of the Earth's mantle, which comprise more than 80% of our planet by volume. To interpret the low shear-velocity anomalies in the lower mantle, we need to construct a reliable transformation diagram of ferromagnesian silicates over a wide pressure-temperature (P-T) range. While MgSiO3 in the perovskite structure has been extensively studied due to its dominance on Earth, phase transformations of iron silicates under the lower mantle conditions remain unresolved. In this study, we have obtained an iron silicate phase in the perovskite (Pv) structure using synthetic fayalite (Fe2SiO4) as the starting material under P-T conditions of the lower mantle. Chemical analyses revealed an unexpectedly high Fe/Si ratio of 1.72(3) for the Pv phase in coexistence with metallic iron particles, indicating incorporation of about 25 mol% Fe2O3 in the Pv phase with an approximate chemical formula (Fe2+0.75Fe3+0.25)(Fe3+0.25Si0.75)O3. We further obtained an iron silicate phase in the postperovskite (PPv) structure above 95 GPa. The calculated curves of compressional (VP) and shear velocity (VS) of iron silicate Pv and PPv as a function of pressure are nearly parallel to those of MgSiO3, respectively. To the best of our knowledge, the iron silicate Pv and PPv are the densest phases among all the reported silicates stable at P-T conditions of the lower mantle. The high ferric iron content in the silicate phase and the spin-crossover of ferric iron at the Si-site above ~55 GPa should be taken into account in order to interpret the seismic observations. Our results would provide crucial information for constraining the geophysical and geochemical models of the lower mantle.
RESUMEN
It is now well known that solids under ultra-high-pressure shock compression will enter the warm dense matter (WDM) regime which connects condensed matter and hot plasma. How condensed matter turns into the WDM, however, remains largely unexplored due to the lack of data in the transition pressure range. In this letter, by employing the unique high-Z three-stage gas gun launcher technique developed recently, we compress gold into TPa shock pressure to fill the gap inaccessible by the two-stage gas gun and laser shock experiments. With the aid of high-precision Hugoniot data obtained experimentally, we observe a clear softening behavior beyond ~560 GPa. The state-of-the-art ab-initio molecular dynamics calculations reveal that the softening is caused by the ionization of 5d electrons in gold. This work quantifies the partial ionization effect of electrons under extreme conditions, which is critical to model the transition region between condensed matter and WDM.
RESUMEN
Relaxation dynamics, as a key to understand glass formation and glassy properties, remains an elusive and challenging issue in condensed matter physics. In this work, in situ high-pressure synchrotron high-energy X-ray photon correlation spectroscopy has been developed to probe the atomic-scale relaxation dynamics of a cerium-based metallic glass during compression. Although the sample density continuously increases, the collective atomic motion initially slows down as generally expected and then counterintuitively accelerates with further compression (density increase), showing an unusual nonmonotonic pressure-induced steady relaxation dynamics cross-over at ~3 GPa. Furthermore, by combining in situ high-pressure synchrotron X-ray diffraction, the relaxation dynamics anomaly is evidenced to closely correlate with the dramatic changes in local atomic structures during compression, rather than monotonically scaling with either sample density or overall stress level. These findings could provide insight into relaxation dynamics and their relationship with local atomic structures of glasses.
RESUMEN
High-pressure transitions are thought to modify hydrogen molecules to a molecular metallic solid and finally to an atomic metal1, which is predicted to have exotic physical properties and the topology of a two-component (electron and proton) superconducting superfluid condensate2,3. Therefore, understanding such transitions remains an important objective in condensed matter physics4,5. However, measurements of the crystal structure of solid hydrogen, which provides crucial information about the metallization of hydrogen under compression, are lacking for most high-pressure phases, owing to the considerable technical challenges involved in X-ray and neutron diffraction measurements under extreme conditions. Here we present a single-crystal X-ray diffraction study of solid hydrogen at pressures of up to 254 gigapascals that reveals the crystallographic nature of the transitions from phase I to phases III and IV. Under compression, hydrogen molecules remain in the hexagonal close-packed (hcp) crystal lattice structure, accompanied by a monotonic increase in anisotropy. In addition, the pressure-dependent decrease of the unit cell volume exhibits a slope change when entering phase IV, suggesting a second-order isostructural phase transition. Our results indicate that the precursor to the exotic two-component atomic hydrogen may consist of electronic transitions caused by a highly distorted hcp Brillouin zone and molecular-symmetry breaking.
Asunto(s)
Hidrógeno/química , Modelos Moleculares , Presión , Electrónica , Difracción de Neutrones , Transición de Fase , Difracción de Rayos XRESUMEN
Water transported by subducted oceanic plates changes mineral and rock properties at high pressures and temperatures, affecting the dynamics and evolution of the Earth's interior. Although geochemical observations imply that water should be stored in the lower mantle, the limited amounts of water incorporation in pyrolitic lower-mantle minerals suggest that water in the lower mantle may be stored in the basaltic fragments of subducted slabs. Here, we performed multianvil experiments to investigate the stability and water solubility of aluminous stishovite and CaCl2-structured silica, referred to as poststishovite, in the SiO2-Al2O3-H2O systems at 24 to 28 GPa and 1,000 to 2,000 °C, representing the pressure-temperature conditions of cold subducting slabs to hot upwelling plumes in the top lower mantle. The results indicate that both alumina and water contents in these silica minerals increase with increasing temperature under hydrous conditions due to the strong Al3+-H+ charge coupling substitution, resulting in the storage of water up to 1.1 wt %. The increase of water solubility in these hydrous aluminous silica phases at high temperatures is opposite of that of other nominally anhydrous minerals and of the stability of the hydrous minerals. This feature prevents the releasing of water from the subducting slabs and enhances the transport water into the deep lower mantle, allowing significant amounts of water storage in the high-temperature lower mantle and circulating water between the upper mantle and the lower mantle through subduction and plume upwelling. The shallower depths of midmantle seismic scatterers than expected from the pure SiO2 stishovite-poststishovite transition pressure support this scenario.
RESUMEN
Carbon nanothread (CNTh) is a "one-dimensional diamond polymer" that combines high tensile strength and flexibility, but it severely suffers from intrathread disorder. Here, by modifying the reactivity and the stacking ordering of the aromatic precursor, crystalline C3N3H3 CNTh with perfect hexagonal orientation and stacking was synthesized at 10.2 GPa and 573 K from s-triazine. By Rietveld refinement of X-ray diffraction data, gas chromatography mass spectrometry investigation, and theoretical calculation, we found that synthesized CNTh has a tube (3,0) structure, with the repeating s-triazine residue connected solely by CN bonds along the thread. A "peri-cage" reaction, the concerted bonding between six C and N atoms, instead of [4 + 2] or [1,4] addition reactions, was concluded for the formation of CNThs, and the critical bonding distance between the nearest intermolecular C and N was â¼2.9 Å. The formation of a "structure-specific" crystalline CNTh with C and N orderly distributed highlighted the importance of reaction selectivity and stacking order of reactant molecules, which have great significance for understanding the polymerization of aromatic molecules under high pressure and developing new crystalline CNThs.
RESUMEN
Very recently, a new superconductor with Tc = 80 K has been reported in nickelate (La3Ni2O7) at around 15-40 GPa conditions (Nature, 621, 493, 2023), which is the second type of unconventional superconductor, besides cuprates, with Tc above liquid nitrogen temperature. However, the phase diagram plotted in this report was mostly based on the transport measurement under low-temperature and high-pressure conditions, and the assumed corresponding X-ray diffraction (XRD) results were carried out at room temperature. This encouraged us to carry out in situ high-pressure and low-temperature synchrotron XRD experiments to determine which phase is responsible for the high Tc state. In addition to the phase transition from the orthorhombic Amam structure to the orthorhombic Fmmm structure, a tetragonal phase with the space group of I4/mmm was discovered when the sample was compressed to around 19 GPa at 40 K where the superconductivity takes place in La3Ni2O7. The calculations based on this tetragonal structure reveal that the electronic states that approached the Fermi energy were mainly dominated by the eg orbitals (3dz2 and 3dx2-y2) of Ni atoms, which are located in the oxygen octahedral crystal field. The correlation between Tc and this structural evolution, especially Ni-O octahedra regularity and the in-plane Ni-O-Ni bonding angles, is analyzed. This work sheds new light to identify what is the most likely phase responsible for superconductivity in double-layered nickelate.
RESUMEN
Refractory oxygen bound to cations is a key component of the interior of rocky exoplanets. Its abundance controls planetary properties including metallic core fraction, core composition, and mantle and crust mineralogy. Interior oxygen abundance, quantified with the oxygen fugacity (fO2), also determines the speciation of volatile species during planetary outgassing, affecting the composition of the atmosphere. Although melting drives planetary differentiation into core, mantle, crust, and atmosphere, the effect of fO2 on rock melting has not been studied directly to date, with prior efforts focusing on fO2-induced changes in the valence ratio of transition metals (particularly iron) in minerals and magma. Here, melting experiments were performed using a synthetic iron-free basalt at oxygen levels representing reducing (log fO2 = -11.5 and -7) and oxidizing (log fO2 = -0.7) interior conditions observed in our solar system. Results show that the liquidus of iron-free basalt at a pressure of 1 atm is lowered by 105 ± 10 °C over an 11 log fO2 units increase in oxygen abundance. This effect is comparable in size to the well-known enhanced melting of rocks by the addition of H2O or CO2 This implies that refractory oxygen abundance can directly control exoplanetary differentiation dynamics by affecting the conditions under which magmatism occurs, even in the absence of iron or volatiles. Exoplanets with a high refractory oxygen abundance exhibit more extensive and longer duration magmatic activity, leading to more efficient and more massive volcanic outgassing of more oxidized gas species than comparable exoplanets with a lower rock fO2.
RESUMEN
Diamond is the hardest known material in nature and features a wide spectrum of industrial and scientific applications. The key to diamond's outstanding properties is its elasticity, which is associated with its exceptional hardness, shear strength, and incompressibility. Despite many theoretical works, direct measurements of elastic properties are limited to only â¼1.4 kilobar (kb) pressure. Here, we report ultrasonic interferometry measurements of elasticity of void-free diamond powder in a multianvil press from 1 atmosphere up to 12.1 gigapascal (GPa). We obtained high-accuracy bulk modulus of diamond as K0 = 439.2(9) GPa, K0' = 3.6(1), and shear modulus as G0 = 533(3) GPa, G0' = 2.3(3), which are consistent with our first-principles simulation. In contrast to the previous experiment of isothermal equation of state, the K0' obtained in this work is evidently greater, indicating that the diamond is not fully described by the "n-m" Mie-Grüneisen model. The structural and elastic properties measured in this work may provide a robust primary pressure scale in extensive pressure ranges.
RESUMEN
Pressure-induced topochemical polymerization of molecular crystals with various stackings is a promising way to synthesize materials with different co-existing sub-structures. Here, by compressing the azobenzene crystal containing two kinds of intermolecular stacking, we synthesized an ordered van der Waals carbon nanoribbon (CNR) heterostructure in one step. Azobenzene polymerizes via a [4 + 2] hetero-Diels-Alder (HDA) reaction of phenylazo-phenyl in layer A and a para-polymerization reaction of phenyl in layer B at 18 GPa, as evidenced by in situ Raman and IR spectroscopies, X-ray diffraction, as well as gas chromatography-mass spectrometry and the solid-state nuclear magnetic resonance of the recovered products. The theoretical calculation shows that the obtained CNR heterostructure has a type II (staggered) band gap alignment. Our work highlights a high-pressure strategy to synthesize bulk CNR heterostructures.
RESUMEN
Ultralow-velocity zones (ULVZs) at Earth's core-mantle boundary region have important implications for the chemical composition and thermal structure of our planet, but their origin has long been debated. Hydrogen-bearing iron peroxide (FeO2Hx) in the pyrite-type crystal structure was recently found to be stable under the conditions of the lowermost mantle. Using high-pressure experiments and theoretical calculations, we find that iron peroxide with a varying amount of hydrogen has a high density and high Poisson ratio as well as extremely low sound velocities consistent with ULVZs. Here we also report a reaction between iron and water at 86 gigapascals and 2,200 kelvin that produces FeO2Hx. This would provide a mechanism for generating the observed volume occupied by ULVZs through the reaction of about one-tenth the mass of Earth's ocean water in subducted hydrous minerals with the effectively unlimited reservoir of iron in Earth's core. Unlike other candidates for the composition of ULVZs, FeO2Hx synthesized from the superoxidation of iron by water would not require an extra transportation mechanism to migrate to the core-mantle boundary. These dense FeO2Hx-rich domains would be expected to form directly in the core-mantle boundary region and their properties would provide an explanation for the many enigmatic seismic features that are observed in ULVZs.
RESUMEN
The distribution and transportation of water in Earth's interior depends on the stability of water-bearing phases. The transition zone in Earth's mantle is generally accepted as an important potential water reservoir because its main constituents, wadsleyite and ringwoodite, can incorporate weight percent levels of H2O in their structures at mantle temperatures. The extent to which water can be transported beyond the transition zone deeper into the mantle depends on the water carrying capacity of minerals stable in subducted lithosphere. Stishovite is one of the major mineral components in subducting oceanic crust, yet the capacity of stishovite to incorporate water beyond at lower mantle conditions remains speculative. In this study, we combine in situ laser heating with synchrotron X-ray diffraction to show that the unit cell volume of stishovite synthesized under hydrous conditions is â¼2.3 to 5.0% greater than that of anhydrous stishovite at pressures of â¼27 to 58 GPa and temperatures of 1,240 to 1,835 K. Our results indicate that stishovite, even at temperatures along a mantle geotherm, can potentially incorporate weight percent levels of H2O in its crystal structure and has the potential to be a key phase for transporting and storing water in the lower mantle.
RESUMEN
The application of pressure can achieve novel structures and exotic phenomena in condensed matters. However, such pressure-induced transformations are generally reversible and useless for engineering materials for ambient-environment applications. Here, we report comprehensive high-pressure investigations on a series of Dion-Jacobson (D-J) perovskites A'A n-1Pb n I3n+1 [A' = 3-(aminomethyl) piperidinium (3AMP), A = methylammonium (MA), n = 1, 2, 4]. Our study demonstrates their irreversible behavior, which suggests pressure/strain engineering could viably improve light-absorber material not only in situ but also ex situ, thus potentially fostering the development of optoelectronic and electroluminescent materials. We discovered that the photoluminescence (PL) intensities are remarkably enhanced by one order of magnitude at mild pressures. Also, higher pressure significantly changes the lattices, boundary conditions of electronic wave functions, and possibly leads to semiconductor-metal transitions. For (3AMP)(MA)3Pb4I13, permanent recrystallization from 2D to three-dimensional (3D) structure occurs upon decompression, with dramatic changes in optical properties.
RESUMEN
Ice amorphization, low- to high-density amorphous (LDA-HDA) transition, as well as (re)crystallization in ice, under compression have been studied extensively due to their fundamental importance in materials science and polyamorphism. However, the nature of the multiple-step "reverse" transformation from metastable high-pressure ice to the stable crystalline form under reduced pressure is not well understood. Here, we characterize the rate and temperature dependence of the structural evolution from ice VII to ice I recovered at low pressure (â¼5 mTorr) using in situ time-resolved X-ray diffraction. Unlike previously reported ice VII (or ice VIII)âLDAâice I transitions, we reveal three temperature-dependent successive transformations: conversion of ice VII into HDA, followed by HDA-to-LDA transition, and then crystallization of LDA into ice I. Significantly, the temperature-dependent characteristic times indicate distinctive thermal activation mechanisms above and below 110-115 K for both ice VIII-to-HDA and HDA-to-LDA transitions. Large-scale molecular-dynamics calculations show that the structural evolution from HDA to LDA is continuous and involves substantial movements of the water molecules at the nanoscale. The results provide a perspective on the interrelationship of polyamorphism and unravel its underpinning complexities in shaping ice-transition kinetic pathways.
RESUMEN
Molecular hydrogen forms the archetypical quantum solid. Its quantum nature is revealed by behavior which is classically impossible and by very strong isotope effects. Isotope effects between [Formula: see text], [Formula: see text], and HD molecules come from mass difference and the different quantum exchange effects: fermionic [Formula: see text] molecules have antisymmetric wavefunctions, while bosonic [Formula: see text] molecules have symmetric wavefunctions, and HD molecules have no exchange symmetry. To investigate how the phase diagram depends on quantum-nuclear effects, we use high-pressure and low-temperature in situ Raman spectroscopy to map out the phase diagrams of [Formula: see text]-HD-[Formula: see text] with various isotope concentrations over a wide pressure-temperature (P-T) range. We find that mixtures of [Formula: see text], HD, and [Formula: see text] behave as an isotopic molecular alloy (ideal solution) and exhibit symmetry-breaking phase transitions between phases I and II and phase III. Surprisingly, all transitions occur at higher pressures for the alloys than either pure [Formula: see text] or [Formula: see text] This runs counter to any quantum effects based on isotope mass but can be explained by quantum trapping of high-kinetic energy states by the exchange interaction.
RESUMEN
Identifying ordering in non-crystalline solids has been a focus of natural science since the publication of Zachariasen's random network theory in 1932, but it still remains as a great challenge of the century. Literature shows that the hierarchical structures, from the short-range order of first-shell polyhedra to the long-range order of translational periodicity, may survive after amorphization. Here, in a piece of AlPO4, or berlinite, we combine X-ray diffraction and stochastic free-energy surface simulations to study its phase transition and structural ordering under pressure. From reversible single crystals to amorphous transitions, we now present an unambiguous view of the topological ordering in the amorphous phase, consisting of a swarm of Carpenter low-symmetry phases with the same topological linkage, trapped in a metastable intermediate stage. We propose that the remaining topological ordering is the origin of the switchable "memory glass" effect. Such topological ordering may hide in many amorphous materials through disordered short atomic displacements.
RESUMEN
2,5-Furandicarboxylic acid (FDCA) is one of the top-12 value-added chemicals from sugar. Besides the wide application in chemical industry, here we found that solid FDCA polymerized to form an atomic-scale ordered sp3-carbon nanothread (CNTh) upon compression. With the help of perfectly aligned π-π stacked molecules and strong intermolecular hydrogen bonds, crystalline poly-FDCA CNTh with uniform syn-configuration was obtained above 11 GPa, with the crystal structure determined by Rietveld refinement of the X-ray diffraction (XRD). The in situ XRD and theoretical simulation results show that the FDCA experienced continuous [4 + 2] Diels-Alder reactions along the stacking direction at the threshold C···C distance of â¼2.8 Å. Benefiting from the abundant carbonyl groups, the poly-FDCA shows a high specific capacity of 375 mAh g-1 as an anode material of a lithium battery with excellent Coulombic efficiency and rate performance. This is the first time a three-dimensional crystalline CNTh is obtained, and we demonstrated it is the hydrogen bonds that lead to the formation of the crystalline material with a unique configuration. It also provides a new method to move biomass compounds toward advanced functional carbon materials.
Asunto(s)
DiamanteRESUMEN
Valence transition could induce structural, insulator-metal, nonmagnetic-magnetic and superconducting transitions in rare-earth metals and compounds, while the underlying physics remains unclear due to the complex interaction of localized 4f electrons as well as their coupling with itinerant electrons. The valence transition in the elemental metal europium (Eu) still has remained as a matter of debate. Using resonant x-ray emission scattering and x-ray diffraction, we pressurize the states of 4f electrons in Eu and study its valence and structure transitions up to 160 GPa. We provide compelling evidence for a valence transition around 80 GPa, which coincides with a structural transition from a monoclinic (C2/c) to an orthorhombic phase (Pnma). We show that the valence transition occurs when the pressure-dependent energy gap between 4f and 5d electrons approaches the Coulomb interaction. Our discovery is critical for understanding the electrodynamics of Eu, including magnetism and high-pressure superconductivity.