RESUMEN
Over the past decade aptamers have emerged as a promising class of bioreceptors for biosensing applications with significant advantages over conventional antibodies. However, experimental studies comparing aptasensors and immunosensors, under equivalent conditions, are limited and the results are inconclusive, in terms of benefits and limitations of each bioreceptor type. In the present work, the performance of aptamer and antibody bioreceptors for the detection of a his-tagged protein, used as a model target, is compared. The bioreceptors are immobilized onto a nanostructured porous silicon (PSi) thin film, used as the optical transducer, and the target protein is detected in a real-time and label-free format by reflective interferometric Fourier transform spectroscopy. For the antibodies, random-oriented immobilization onto the PSi nanostructure results in a poor biosensing performance. Contrary, Fc-oriented immobilization of the antibodies shows a similar biosensing performance to that exhibited by the aptamer-based biosensor, in terms of binding rate, dynamic detection range, limit of detection and selectivity. The aptasensor outperforms in terms of its reusability and storability, while the immunosensor could not be regenerated for subsequent experiments.
Asunto(s)
Aptámeros de Nucleótidos , Técnicas Biosensibles , Inmunoensayo , Porosidad , SilicioRESUMEN
A generic biosensing platform, based on nanostructured porous Si (PSi), Fabry-Pérot thin films, for label-free monitoring of heavy metal ions in aqueous solutions by enzymatic activity inhibition, is described. First, we show a general detection assay by immobilizing horseradish peroxidase (HRP) within the oxidized PSi nanostructure and monitor its catalytic activity in real time by reflective interferometric Fourier transform spectroscopy. Optical studies reveal the high specificity and sensitivity of the HRP-immobilized PSi towards three metal ions (Ag(+) > Pb(2+) > Cu(2+)), with a detection limit range of 60-120 ppb. Next, we demonstrate the concept of specific detection of Cu(2+) ions (as a model heavy metal) by immobilizing Laccase, a multi-copper oxidase, within the oxidized PSi. The resulting biosensor allows for specific detection and quantification of copper ions in real water samples by monitoring the Laccase relative activity. The optical biosensing results are found to be in excellent agreement with those obtained by the gold standard analytical technique (ICP-AES) for all water samples. The main advantage of the presented biosensing concept is the ability to detect heavy metal ions at environmentally relevant concentrations using a simple and portable experimental setup, while the specific biosensor design can be tailored by varying the enzyme type.
Asunto(s)
Técnicas Biosensibles/métodos , Metales Pesados/análisis , Nanoestructuras/química , Silicio/química , Oligoelementos/análisis , Agua/análisis , PorosidadAsunto(s)
Técnicas Biosensibles/métodos , Silicio/química , Animales , Colorantes Fluorescentes/química , Humanos , Luz , Mediciones Luminiscentes/métodos , Técnicas Analíticas Microfluídicas/instrumentación , Técnicas Analíticas Microfluídicas/métodos , Porosidad , Puntos Cuánticos/química , Silicio/efectos de la radiación , Teléfono InteligenteRESUMEN
The task of rapid detection and identification of bacteria remains a major challenge in both medicine and industry. This work introduces a new concept for the design of self-reporting optical structures that can detect and quantify bacteria in real-time. The sensor is based on a two-dimensional periodic structure of porous Si photonic crystals in which the pore size is adjusted to fit the target bacteria cells (Escherichia coli). Spontaneous bacteria capture within the pores induces measurable changes in the zero-order reflectivity spectrum collected from the periodic structure. Confocal laser microscopy and electron microscopy confirm that the Escherichia coli cells are individually imprisoned within the porous array. A simple model is suggested to correlate the optical readout and the bacteria concentration and its predictions are found to be in good agreement with experimental results. In addition, we demonstrate that sensing scheme can be easily modified to potentially allow monitoring of concentration, growth and physiological state of bacteria cells. This generic platform can be tailored to target different microorganisms by tuning the array periodicity and its surface chemistry for rapid and label-free detection outside the laboratory environment.
Asunto(s)
Técnicas Biosensibles/instrumentación , Infecciones por Escherichia coli/microbiología , Escherichia coli/aislamiento & purificación , Óptica y Fotónica/instrumentación , Dióxido de Silicio/química , Cristalización , Escherichia coli/crecimiento & desarrollo , Infecciones por Escherichia coli/diagnóstico , Humanos , Fotones , PorosidadRESUMEN
A multifunctional porous Si biosensor that can both monitor the enzymatic activity of minute samples and allow subsequent retrieval of the entrapped proteolytic products for mass spectrometry analysis is described. The biosensor is constructed by DNA-directed/reversible immobilization of enzymes onto a Fabry-Pérot thin film. We demonstrate high enzymatic activity levels of the immobilized enzymes (more than 80%), while maintaining their specificity. Mild dehybridization conditions allow enzyme recycling and facile surface regeneration for consecutive biosensing analysis. The catalytic activity of the immobilized enzymes is monitored in real time by reflective interferometric Fourier transform spectroscopy. The real-time analysis of minute quantities of enzymes (concentrations at least 1 order of magnitude lower, 0.1 mg mL(-1), in comparison to previous reports, 1 mg mL(-1)), in particular proteases, paves the way for substrate profiling and the identification of cleavage sites. The biosensor configuration is compatible with common proteomic methods and allows for a successful downstream mass spectrometry analysis of the reaction products.
Asunto(s)
Enzimas Inmovilizadas/análisis , Enzimas Inmovilizadas/genética , Dióxido de Silicio/química , Secuencia de Aminoácidos , Animales , Bovinos , Datos de Secuencia Molecular , Porosidad , Estructura Secundaria de Proteína , Proteolisis , Propiedades de SuperficieRESUMEN
Superhydrophobicity is a well-known wetting phenomenon found in numerous plants and insects. It is achieved by the combination of the surface's chemical properties and its surface roughness. Inspired by nature, numerous synthetic superhydrophobic surfaces have been developed for various applications. Designated surface coating is one of the fabrication routes to achieve the superhydrophobicity. Yet, many of these coatings, such as fluorine-based formulations, may pose severe health and environmental risks, limiting their applicability. Herein, we present a new family of superhydrophobic coatings comprised of natural saturated fatty acids, which are not only a part of our daily diet, but can be produced from renewable feedstock, providing a safe and sustainable alternative to the existing state-of-the-art. These crystalline coatings are readily fabricated via single-step deposition routes, namely thermal deposition or spray-coating. The fatty acids self-assemble into highly hierarchical crystalline structures exhibiting a water contact angle of â¼165° and contact angle hysteresis lower than 6°, while their properties and morphology depend on the specific fatty acid used as well as on the deposition technique. Moreover, the fatty acid coatings demonstrate excellent thermal stability. Importantly, this new family of coatings displays excellent anti-biofouling and antimicrobial properties against Escherichia coli and Listeria innocua, used as relevant model Gram-negative and Gram-positive bacteria, respectively. These multifunctional coatings hold immense potential for application in numerous fields, ranging from food safety to biomedicine, offering sustainable and safe solutions.
RESUMEN
Optical label-free porous Si-based biosensors for rapid bacteria detection are introduced. The biosensors are designed to directly capture the target bacteria cells onto their surface with no prior sample processing (such as cell lysis). Two types of nanostructured optical transducers based on oxidized porous Si (PSiO(2)) Fabry-Pérot thin films are synthesized and used to construct the biosensors. In the first system, we graft specific monoclonal antibodies (immunoglobulin G's) onto a neat electrochemically-machined PSiO(2) surface, based on well-established silanization chemistry. The second biosensor class consists of a PSiO(2)/hydrogel hybrid. The hydrogel, polyacrylamide, is synthesized in situ within the nanostructured PSiO(2) host and conjugated with specific monoclonal antibodies to provide the active component of the biosensor. Exposure of these modified-surfaces to the target bacteria results in "direct-cell-capture" onto the biosensor surface. These specific binding events induce predictable changes in the thin-film optical interference spectrum of the biosensor. Our studies demonstrate the applicability of these biosensors for the detection of low bacterial concentrations, in the range of 10(3)-10(5) cell/ml, within minutes. The sensing performance of the two different platforms, in terms of their stability in aqueous media and sensitivity, are compared and discussed. This preliminary study suggests that biosensors based on PSiO(2)/hydrogel hybrid outperform the neat PSiO(2) system.
Asunto(s)
Técnicas Bacteriológicas/métodos , Técnicas Biosensibles/instrumentación , Escherichia coli K12/aislamiento & purificación , Nanoestructuras/química , Dióxido de Silicio/química , Anticuerpos Monoclonales/química , Anticuerpos Monoclonales/inmunología , Técnicas Bacteriológicas/instrumentación , Técnicas Biosensibles/métodos , Hidrogel de Polietilenoglicol-Dimetacrilato , Inmunoglobulina G/inmunología , Límite de Detección , Porosidad , Transductores , AguaRESUMEN
We present a porous Si (PSi)-based label-free optical biosensor for sensitive and continuous detection of a model target protein biomarker in gastrointestinal (GI) tract fluids. The biosensing platform is designed to continuously monitor its target protein within the complex GI fluids without sample preparation and washing steps. An oxidized PSi Fabry-Pérot thin films are functionalized with aptamers, which are used as the capture probes. The optical response of the aptamer-conjugated PSi is studied upon exposure to unprocessed GI fluids, originated from domestic pigs, spiked with the target protein. We investigate biological and chemical surface passivation methods to stabilize the surface and reduce non-specific adsorption of interfering proteins and molecules within the GI fluids. For the passivated PSi aptasensor we simulate continuous in vivo biosensing conditions, demonstrating that the aptasensor could successfully detect the target in a continuous manner without any need for surface washing after the target protein binding events, at a clinically relevant range. Furthermore, we simulate biosensing conditions within a smart capsule, in which the aptasensor is occasionally exposed to GI fluids in flow or via repeated cycles of injection and static incubation events. Such biosensor can be implemented within ingestible capsule devices and used for in situ biomarker detection in the GI tract.
Asunto(s)
Aptámeros de Nucleótidos , Técnicas Biosensibles , Biomarcadores , Tracto Gastrointestinal , SilicioRESUMEN
An optical label-free biosensing platform for bacteria detection ( Escherichia coli K12 as a model system) based on nanostructured oxidized porous silicon (PSiO(2)) is introduced. The biosensor is designed to directly capture the target bacteria cells on its surface with no prior sample processing (such as cell lysis). The optical reflectivity spectrum of the PSiO(2) nanostructure displays Fabry-Pérot fringes characteristic of thin-film interference, enabling direct, real-time observation of bacteria attachment within minutes. The PSiO(2) optical nanostructure is synthesized and used as the optical transducer element. The porous surface is conjugated with specific monoclonal antibodies (immunoglobulin G's) to provide the active component of the biosensor. The immobilization of the antibodies onto the biosensor system is confirmed by attenuated total reflectance Fourier transform infrared spectroscopy, fluorescent labeling experiments, and refractive interferometric Fourier transform spectroscopy. We show that the immobilized antibodies maintain their immunoactivity and specificity when attached to the sensor surface. Exposure of these nanostructures to the target bacteria results in "direct cell capture" onto the biosensor surface. These specific binding events induce predictable changes in the thin-film optical interference spectrum of the biosensor. Our preliminary studies demonstrate the applicability of these biosensors for the detection of low bacterial concentrations. The current detection limit of E. coli K12 bacteria is 10(4) cells/mL within several minutes.
Asunto(s)
Técnicas Biosensibles/métodos , Separación Celular/métodos , Ingeniería/métodos , Escherichia coli K12/citología , Escherichia coli K12/aislamiento & purificación , Nanoestructuras/química , Dióxido de Silicio/química , Anticuerpos Monoclonales/química , Anticuerpos Monoclonales/inmunología , Escherichia coli K12/inmunología , Interferometría , Luz , Fenómenos Ópticos , Oxidación-Reducción , Porosidad , Espectroscopía Infrarroja por Transformada de Fourier , Propiedades de Superficie , Factores de Tiempo , TransductoresRESUMEN
The anterior gradient homologue-2 (AGR2) protein is an attractive biomarker for various types of cancer. In pancreatic cancer, it is secreted to the pancreatic juice by premalignant lesions, which would be an ideal stage for diagnosis. Thus, designing assays for the sensitive detection of AGR2 would be highly valuable for the potential early diagnosis of pancreatic and other types of cancer. Herein, we present a biosensor for label-free AGR2 detection and investigate approaches for enhancing the aptasensor sensitivity by accelerating the target mass transfer rate and reducing the system noise. The biosensor is based on a nanostructured porous silicon thin film that is decorated with anti-AGR2 aptamers, where real-time monitoring of the reflectance changes enables the detection and quantification of AGR2, as well as the study of the diffusion and target-aptamer binding kinetics. The aptasensor is highly selective for AGR2 and can detect the protein in simulated pancreatic juice, where its concentration is outnumbered by orders of magnitude by numerous proteins. The aptasensor's analytical performance is characterized with a linear detection range of 0.05-2 mg mL-1, an apparent dissociation constant of 21 ± 1 µM, and a limit of detection of 9.2 µg mL-1 (0.2 µM), which is attributed to mass transfer limitations. To improve the latter, we applied different strategies to increase the diffusion flux to and within the nanostructure, such as the application of isotachophoresis for the preconcentration of AGR2 on the aptasensor, mixing, or integration with microchannels. By combining these approaches with a new signal processing technique that employs Morlet wavelet filtering and phase analysis, we achieve a limit of detection of 15 nM without compromising the biosensor's selectivity and specificity.
RESUMEN
There is a demonstrated and paramount need for rapid, reliable infectious disease diagnostics, particularly those for invasive fungal infections. Current clinical determinations for an appropriate antifungal therapy can take up to 3 days using current antifungal susceptibility testing methods, a time-to-readout that can prove detrimental for immunocompromised patients and promote the spread of antifungal resistant pathogens. Herein, we demonstrate the application of intensity-based reflectometric interference spectroscopic measurements (termed iPRISM) on microstructured silicon sensors for use as a rapid, phenotypic antifungal susceptibility test. This diagnostic platform optically tracks morphological changes of fungi corresponding to conidia growth and hyphal colonization at a solid-liquid interface in real time. Using Aspergillus niger as a model fungal pathogen, we can determine the minimal inhibitory concentration of clinically relevant antifungals within 12 h. This assay allows for expedited detection of fungal growth and provides a label-free alternative to broth microdilution and agar diffusion methods, with the potential to be used for point-of-care diagnostics.
Asunto(s)
Antifúngicos , Aspergillus niger , Antifúngicos/farmacología , Humanos , Pruebas de Sensibilidad Microbiana , Silicio , Análisis EspectralRESUMEN
Carbon dots (C-dots) exhibit unique fluorescence properties, mostly depending upon their physical environments. Here we investigate the optical properties and nanostructure of Carbon dots (C-dots) which are synthesized in situ within different porous Silicon (PSi) Bragg reflectors. The resulting hybrids were characterized by photoluminescence, X-ray photoelectron, and Fourier Transform Infrared spectroscopies, as well as by confocal and transmission electron microscopy. We show that by tailoring the location of the PSi Bragg reflector photonic bandgap and its oxidation level, the C-dots emission spectral features can be tuned. Notably, their fluorescence emission can be significantly enhanced when the high reflection band of the PSi host overlaps with the confined C-dots' peak wavelength, and the PSi matrix is thermally oxidized at mild conditions. These phenomena are observed for multiple compositions of PSi Bragg reflectors/C-dots hybrids.
RESUMEN
This work describes the fabrication of antimicrobial multilayered polymeric films containing carvacrol (used as a model essential oil) by co-extrusion and multiplication technique. The microlayering process was utilized to produce films, with up to 65 alternating layers, of carvacrol-containing low-density polyethylene (LDPE) and ethylene vinyl alcohol copolymer (EVOH). Carvacrol was melt compounded with LDPE or loaded into halloysite nanotubes (HNTs) in a pre-compounding step prior film production. The detailed nanostructure and composition (in terms of carvacrol content) of the films were characterized and correlated to their barrier properties, carvacrol release rate, and antibacterial and antifungal activity. The resulting films exhibit high carvacrol content despite the harsh processing conditions (temperature of 200 °C and long processing time), regardless of the number of layers or the presence of HNTs. The multilayered films exhibit superior oxygen transmission rates and carvacrol diffusivity values that are more than two orders of magnitude lower in comparison to single-layered carvacrol-containing films (i.e., LDPE/carvacrol and LDPE/(HNTs/carvacrol)) produced by conventional cast extrusion. The (LDPE/carvacrol)/EVOH and (LDPE/[HNTs/carvacrol])/EVOH films demonstrated excellent antimicrobial efficacy against E. coli and Alternaria alternata in in vitro micro-atmosphere assays and against A. alternata and Rhizopus in cherry tomatoes, used as the food model. The results presented here suggest that sensitive essential oils, such as carvacrol, can be incorporated into plastic polymers constructed of tailored multiple layers, without losing their antimicrobial efficacy.
RESUMEN
Porous silicon (PSi) nanomaterials have been widely studied as label-free optical biosensors for protein detection. However, these biosensors' performance, specifically in terms of their sensitivity (which is typically in the micromolar range), is insufficient for many applications. Herein, we present a proof-of-concept application of the electrokinetic isotachophoresis (ITP) technique for real-time preconcentration of a target protein on a PSi biosensor. With ITP, a highly concentrated target zone is delivered to the sensing area, where the protein target is captured by immobilized aptamers. The detection of the binding events is conducted in a label-free manner by reflective interferometric Fourier transformation spectroscopy (RIFTS). Up to 1000-fold enhancement in local concentration of the protein target and the biosensor's sensitivity are achieved, with a measured limit of detection of 7.5 nM. Furthermore, the assay is successfully performed in complex media, such as bacteria lysate samples, while the selectivity of the biosensor is retained. The presented assay could be further utilized for other protein targets, and to promote the development of clinically useful PSi biosensors.
Asunto(s)
Técnicas Biosensibles/métodos , Glicósido Hidrolasas/análisis , Fragmentos de Péptidos/análisis , Silicio/química , Aptámeros de Nucleótidos/química , Técnicas Biosensibles/instrumentación , Escherichia coli K12 , Glicósido Hidrolasas/química , Isotacoforesis/métodos , Dispositivos Laboratorio en un Chip , Límite de Detección , Fragmentos de Péptidos/química , Porosidad , Dominios Proteicos , Sensibilidad y Especificidad , Espectrofotometría/métodosRESUMEN
Rapid detection of target bacteria is crucial to provide a safe food supply and to prevent foodborne diseases. Herein, we present an optical biosensor for identification and quantification of Escherichia coli (E. coli, used as a model indicator bacteria species) in complex food industry process water. The biosensor is based on a nanostructured, oxidized porous silicon (PSi) thin film which is functionalized with specific antibodies against E. coli. The biosensors were exposed to water samples collected directly from process lines of fresh-cut produce and their reflectivity spectra were collected in real time. Process water were characterized by complex natural micro-flora (microbial load of >107 cell/mL), in addition to soil particles and plant cell debris. We show that process water spiked with culture-grown E. coli, induces robust and predictable changes in the thin-film optical interference spectrum of the biosensor. The latter is ascribed to highly specific capture of the target cells onto the biosensor surface, as confirmed by real-time polymerase chain reaction (PCR). The biosensors were capable of selectively identifying and quantifying the target cells, while the target cell concentration is orders of magnitude lower than that of other bacterial species, without any pre-enrichment or prior processing steps.
Asunto(s)
Escherichia coli/genética , Silicio/química , Técnicas Biosensibles/métodos , Industria de Alimentos/métodos , Nanoestructuras/química , Porosidad , Reacción en Cadena en Tiempo Real de la Polimerasa/métodos , Agua/químicaRESUMEN
The influence of thermal oxidation conditions on the performance of porous Si optical biosensors used for label-free and real-time monitoring of enzymatic activity is studied. We compare three oxidation temperatures (400, 600, and 800 °C) and their effect on the enzyme immobilization efficiency and the intrinsic stability of the resulting oxidized porous Si (PSiO2), Fabry-Pérot thin films. Importantly, we show that the thermal oxidation profoundly affects the biosensing performance in terms of greater optical sensitivity, by monitoring the catalytic activity of horseradish peroxidase and trypsin-immobilized PSiO2. Despite the significant decrease in porous volume and specific surface area (confirmed by nitrogen gas adsorption-desorption studies) with elevating the oxidation temperature, higher content and surface coverage of the immobilized enzymes is attained. This in turn leads to greater optical stability and sensitivity of PSiO2 nanostructures. Specifically, films produced at 800 °C exhibit stable optical readout in aqueous buffers combined with superior biosensing performance. Thus, by proper control of the oxide layer formation, we can eliminate the aging effect, thus achieving efficient immobilization of different biomolecules, optical signal stability, and sensitivity.
Asunto(s)
Técnicas Biosensibles/instrumentación , Enzimas Inmovilizadas/química , Nanoestructuras/química , Silicio/química , Enzimas Inmovilizadas/metabolismo , Peroxidasa de Rábano Silvestre/química , Peroxidasa de Rábano Silvestre/metabolismo , Calor , Oxidación-Reducción , PorosidadRESUMEN
A label-free optical biosensor based on a nanostructured porous Si is designed for rapid capture and detection of Escherichia coli K12 bacteria, as a model microorganism. The biosensor relies on direct binding of the target bacteria cells onto its surface, while no pretreatment (e.g. by cell lysis) of the studied sample is required. A mesoporous Si thin film is used as the optical transducer element of the biosensor. Under white light illumination, the porous layer displays well-resolved Fabry-Pérot fringe patterns in its reflectivity spectrum. Applying a fast Fourier transform (FFT) to reflectivity data results in a single peak. Changes in the intensity of the FFT peak are monitored. Thus, target bacteria capture onto the biosensor surface, through antibody-antigen interactions, induces measurable changes in the intensity of the FFT peaks, allowing for a 'real time' observation of bacteria attachment. The mesoporous Si film, fabricated by an electrochemical anodization process, is conjugated with monoclonal antibodies, specific to the target bacteria. The immobilization, immunoactivity and specificity of the antibodies are confirmed by fluorescent labeling experiments. Once the biosensor is exposed to the target bacteria, the cells are directly captured onto the antibody-modified porous Si surface. These specific capturing events result in intensity changes in the thin-film optical interference spectrum of the biosensor. We demonstrate that these biosensors can detect relatively low bacteria concentrations (detection limit of 10(4) cells/ml) in less than an hour.
Asunto(s)
Técnicas Biosensibles/métodos , Escherichia coli K12/aislamiento & purificación , Microscopía Fluorescente/métodos , Técnicas Biosensibles/instrumentación , Análisis de Fourier , Microscopía Fluorescente/instrumentación , Nanoestructuras/química , Dióxido de Silicio/químicaRESUMEN
Nanostructured porous silicon (PSi) thin films, fabricated by the electrochemical anodization of single crystalline Si wafers, are studied as delivery systems for the anticancer drug mitoxantrone dihydrochloride (MTX). The surface chemistry of the PSi carriers was tailored by surface alkylation using thermal hydrosilylation of 1-dodecene and undecylenic acid, followed by physical adsorption or covalent attachment of MTX to the Si scaffold. The nanostructure and the physiochemical properties of the different carriers were characterized by attenuated total reflectance Fourier transform infrared spectroscopy, nitrogen adsorption-desorption and contact angle measurements, demonstrating that surface alkylation results in a pronounced effect on the hydrophobicity/hydrophilicity of the scaffolds and a volumetric gain in pore wall, which in turn results in a decrease in pore diameter (>23%) and available porous volume (>40%). The effect of these key parameters on MTX loading efficacy, release profile, Si scaffold erosion kinetics and in vitro cytotoxicity on human breast carcinoma (MDA-MB-231) cells was studied and compared to the behavior of neat PSi carriers. We show that the chemically modified PSi carriers exhibit sustained release for several days to weeks with minimal to no burst effect, while for the native PSi MTX release was completed within 5h with a substantial burst release of ~40%. Moreover, our in vitro cytotoxicity experiments have clearly demonstrated that the MTX released from all PSi carriers maintained its cytotoxic effect towards MDA-MB-231 cells, in comparison to the low toxicity of the PSi carriers.
Asunto(s)
Neoplasias de la Mama/tratamiento farmacológico , Mitoxantrona/análogos & derivados , Nanocápsulas/administración & dosificación , Nanocápsulas/química , Silicio/química , Absorción , Antineoplásicos/administración & dosificación , Antineoplásicos/química , Neoplasias de la Mama/patología , Línea Celular Tumoral , Difusión , Humanos , Ensayo de Materiales , Mitoxantrona/administración & dosificación , Mitoxantrona/química , Porosidad , Resultado del TratamientoRESUMEN
Multifunctional porous Si nanostructure is designed to optically monitor enzymatic activity of horseradish peroxidase. First, an oxidized PSi optical nanostructure, a Fabry-Pérot thin film, is synthesized and is used as the optical transducer element. Immobilization of the enzyme onto the nanostructure is performed through DNA-directed immobilization. Preliminary studies demonstrate high enzymatic activity levels of the immobilized horseradish peroxidase, while maintaining its specificity. The catalytic activity of the enzymes immobilized within the porous nanostructure is monitored in real time by reflective interferometric Fourier transform spectroscopy. We show that we can easily regenerate the surface for consecutive biosensing analysis by mild dehybridization conditions.