Synthesis of Polysubstituted Ferrocenesulfoxides.

The purpose of the study is to design synthetic methodologies, especially directed deprotometalation using polar organometallic reagents, to access polysubstituted ferrocenesulfoxides. From enantiopure 2-substituted (SiMe3, PPh2) S-tert-butylferrocenesulfoxides, a third substituent was first introduced at the 5 position (SiMe3, I, D, C(OH)Ph2, Me, PPh2, CH2NMe2, F) and removal of the trimethylsilyl group then afforded 2-substituted ferrocenesulfoxides unreachable otherwise. Attempts to apply the "halogen dance" reaction to the ferrocenesulfoxide series led to unexpected results although rationalized in light of calculated pKa values. Further functionalizations were also possible. Thus, new enantiopure, planar chiral di- and trisubstituted ferrocenes have been obtained, in addition to several original 2-substituted, 2,3- and 2,5-disubstituted, 2,3,5-trisubstituted and even 2,3,4,5-tetrasubstituted ferrocenesulfoxides, also enantiopure.

Deprotometalation-Iodolysis and Direct Iodination of 1-Arylated 7-Azaindoles: Reactivity Studies and Molecule Properties.

Five protocols were first compared for the copper-catalyzed C-N bond formation between 7-azaindole and aryl/heteroaryl iodides/bromides. The 1-arylated 7-azaindoles thus obtained were subjected to deprotometalation-iodolysis sequences using lithium 2,2,6,6-tetramethylpiperidide as the base and the corresponding zinc diamide as an in situ trap. The reactivity of the substrate was discussed in light of the calculated atomic charges and the pKa values. The behavior of the 1-arylated 7-azaindoles in direct iodination was then studied, and the results explained by considering the HOMO orbital coefficients and the atomic charges. Finally, some of the iodides generated, generally original, were involved in the N-arylation of indole. While crystallographic data were collected for fifteen of the synthesized compounds, biological properties (antimicrobial, antifungal and antioxidant activity) were evaluated for others.

Mesoionic tetrazolium-5-aminides: Synthesis, molecular and crystal structures, UV-vis spectra, and DFT calculations.

Tetrazolium-5-aminides have been prepared by the tert-butylation of 5-aminotetrazole and its N-methyl derivatives by the t-BuOH/HClO4 system followed by the treatment of the tetrazolium salts by alkali. The mesoionic compounds have been found to show a higher reactivity of the exocyclic N atom in comparison with 5-aminotetrazoles. The compounds reacted with 1,2-dibromoethane and 5-(methylsulfonyl)-1-phenyl-1H-tetrazole with substitution of bromine and methylsulfonyl groups giving the corresponding tetrazolium salts or conjugate aminides. The obtained mesoionic tetrazoles have been characterized by elemental analysis, FTIR, NMR, and UV-vis spectroscopy, TGA/DSC analysis and for 1,3-di-tert-butyltetrazolium-5-aminide, its N,N'-ethylene-bridged bis-derivative and (1,3-di-tert-butyl-1H-tetrazol-3-ium-5-yl)(1-phenyl-1H-tetrazol-5-yl)amide by single crystal X-ray analysis. The structural and spectral features of the tetrazolium-5-aminides are discussed by using quantum-chemical calculations.

Deprotometalation-iodolysis and computed CH acidity of 1,2,3- and 1,2,4-triazoles. Application to the synthesis of resveratrol analogues.

1-Aryl- and 2-aryl-1,2,3-triazoles were synthesized by N-arylation of the corresponding azoles using aryl iodides. The deprotometalations of 1-phenyl-1,2,3-triazole and -1,2,4-triazole were performed using a 2,2,6,6-tetramethylpiperidino-based mixed lithium-zinc combination and occurred at the most acidic site, affording by iodolysis the 5-substituted derivatives. Dideprotonation was noted from 1-(2-thienyl)-1,2,4-triazole by increasing the amount of base. From 2-phenyl-1,2,3-triazoles, and in particular from 2-(4-trifluoromethoxy)phenyl-1,2,3-triazole, reactions at the 4 position of the triazolyl, but also ortho to the triazolyl on the phenyl group, were observed. The results were analyzed with the help of the CH acidities of the substrates, determined in THF solution using the DFT B3LYP method. 4-Iodo-2-phenyl-1,2,3-triazole and 4-iodo-2-(2-iodophenyl)-1,2,3-triazole were next involved in Suzuki coupling reactions to furnish the corresponding 4-arylated and 4,2'-diarylated derivatives. When evaluated for biological activities, the latter (which are resveratrol analogues) showed moderate antibacterial activity and promising antiproliferative effect against MDA-MB-231 cell line.

Deproto-metallation of N-arylated pyrroles and indoles using a mixed lithium-zinc base and regioselectivity-computed CH acidity relationship.

The synthesis of N-arylated pyrroles and indoles is documented, as well as their functionalization by deprotonative metallation using the base in situ prepared from LiTMP and ZnCl2·TMEDA (1/3 equiv). With N-phenylpyrrole and -indole, the reactions were carried out in hexane containing TMEDA which regioselectively afforded the 2-iodo derivatives after subsequent iodolysis. With pyrroles and indoles bearing N-substituents such as 2-thienyl, 3-pyridyl, 4-methoxyphenyl and 4-bromophenyl, the reactions all took place on the substituent, at the position either adjacent to the heteroatom (S, N) or ortho to the heteroatom-containing substituent (OMe, Br). The CH acidities of the substrates were determined in THF solution using the DFT B3LYP method in order to rationalize the experimental results.

Deproto-metallation using a mixed lithium-zinc base and computed CH acidity of 1-aryl 1H-benzotriazoles and 1-aryl 1H-indazoles.

1-Aryl-1H-benzotriazoles and -1H-indazoles were synthesized, and their deproto-metallation using the base prepared by mixing LiTMP with ZnCl2·TMEDA (1/3 equiv.) was studied. In the indazole series, reactions occurring at the 3 position were followed by ring opening, and functionalization of the substrate was only found possible (on the sulfur ring) using 2-thienyl as aryl group. In the benzotriazole series, either mono- or bis-deprotonation (depending on the amount of base employed) was achieved with phenyl, 4-methoxyphenyl and 2-thienyl as aryl group, and bis-deprotonation in the case of 4-chlorophenyl and 4-trifluoromethylphenyl. The experimental results were analyzed with the help of the CH acidities of the substrates, determined in THF solution using the DFT B3LYP method.

Computed CH acidity of biaryl compounds and their deprotonative metalation by using a mixed lithium/zinc-TMP base.

With the aim of synthesizing biaryl compounds, several aromatic iodides were prepared by the deprotonative metalation of methoxybenzenes, 3-substituted naphthalenes, isoquinoline, and methoxypyridines by using a mixed lithium/zinc-TMP (TMP=2,2,6,6-tetramethylpiperidino) base and subsequent iodolysis. The halides thus obtained, as well as commercial compounds, were cross-coupled under palladium catalysis (e.g., Suzuki coupling with 2,4-dimethoxy-5-pyrimidylboronic acid) to afford various representative biaryl compounds. Deprotometalation of the latter compounds was performed by using the lithium/zinc-TMP base and evaluated by subsequent iodolysis. The outcome of these reactions has been discussed in light of the CH acidities of these substrates, as determined in THF solution by using the DFT B3LYP method. Except for in the presence of decidedly lower pKa values, the regioselectivities of the deprotometalation reactions tend to be governed by nearby coordinating atoms rather than by site acidities. In particular, azine and diazine nitrogen atoms have been shown to be efficient in inducing the reactions with the lithium/zinc-TMP base at adjacent sites (e.g., by using 1-(2-methoxyphenyl)isoquinoline, 4-(2,5-dimethoxyphenyl)-3-methoxypyridine, or 5-(2,5-dimethoxyphenyl)-2,4-dimethoxypyrimidine as the substrate), a behavior that has already been observed upon treatment with lithium amides under kinetic conditions. Finally, the iodinated biaryl derivatives were involved in palladium-catalyzed reactions.

From ferrocene to decasubstituted enantiopure ferrocene-1,1'-disulfoxide derivatives.

The functionalization of (R,R)-S,S'-di-tert-butylferrocene-1,1'-disulfoxide by deprotolithiation-electrophilic trapping sequences was studied towards polysubstituted, enantiopure derivatives for which the properties were determined. While the 2,2'-disubstituted ferrocene derivatives were obtained as expected, subsequent functionalization of the 2,2'-di(phenylthio) and 2,2'-bis(trimethylsilyl) derivatives occurred primarily at the 4- or 4,4'-positions. This unusual regioselectivity was discussed in detail in light of pKa values and structural data. The less sterically hindered 2,2'-difluorinated derivative yielded the expected 1,1',2,2',3,3'-hexasubstituted ferrocenes by the deprotometallation-trapping sequence. Further functionalization proved possible, leading to early examples of 1,1',2,2',3,3',4,4'-octa, nona and even decasubstituted ferrocenes. Some of the newly prepared ferrocene-1,1'-disulfoxides were tested as ligands for enantioselective catalysis and their electrochemical properties were investigated.

Deproto-metallation and computed CH acidity of 2-aryl-1,2,3-triazoles.

2-Aryl-1,2,3-triazoles were synthesized by cyclization of the corresponding glyoxal arylosazones, generated from commercial arylhydrazines. The deproto-metallation of 2-phenyl-1,2,3-triazole was attempted using different 2,2,6,6-tetramethylpiperidino-based mixed lithium-metal (Zn, Cd, Cu, Co, Fe) combinations, giving results in the case of Zn, Cd, and Cu. The lithium-zinc combination was next selected to apply the deprotonation-iodination sequence to all the 2-aryl-1,2,3-triazoles synthesized. The results were analyzed with the help of the CH acidities of the substrates, determined in THF solution using the DFT B3LYP method.

Deprotonative metalation of chloro- and bromopyridines using amido-based bimetallic species and regioselectivity-computed CH acidity relationships.

A series of chloro- and bromopyridines have been deprotometalated by using a range of 2,2,6,6-tetramethylpiperidino-based mixed lithium-metal combinations. Whereas lithium-zinc and lithium-cadmium bases afforded different mono- and diiodides after subsequent interception with iodine, complete regioselectivities were observed with the corresponding lithium-copper combination, as demonstrated by subsequent trapping with benzoyl chlorides. The obtained selectivities have been discussed in light of the CH acidities of the substrates, determined both in the gas phase and as a solution in THF by using the DFT B3LYP method.

N-aryl pyrazoles: DFT calculations of CH acidity and deprotonative metallation using a combination of lithium and zinc amides.

A series of N-aryl and N-heteroaryl pyrazoles have been deproto-metallated using a 2,2,6,6-tetramethylpiperidino-based mixed lithium-zinc combination. Mono-, di-, and tri-iodides have been obtained after subsequent trapping with iodine, depending on the substrate and on the quantity of base used. The results have been discussed in the light of the CH acidities of the substrates, determined both in the gas phase and in THF solution using the DFT B3LYP method.

Copper(II) tetrafluoroborate complexes with the N(3),N(4)-bridging coordination of 1-(tert-butyl)-1H-tetrazole: synthesis, crystal structure and magnetic properties.

1-(tert-Butyl)-1H-tetrazole (L) reacts with copper(ii) tetrafluoroborate hexahydrate to give the complexes [Cu2L8(H2O)2](BF4)4 (1) or [Cu3L6(H2O)6](BF4)6 (2) depending on the reaction conditions. These complexes, as well as compound L, were characterized using single crystal X-ray analysis. Complex 1 was found to comprise a dinuclear complex cation [Cu2L8(H2O)2](4+) (the Ci symmetry point group), with six tetrazole ligands L showing monodentate N(4)-coordination, and two ligands L providing two tetrazole ring N(3),N(4) bridges between the copper(ii) cations; water molecules complete the distorted octahedral coordination of the metal ions. Complex 2 includes a linear trinuclear complex cation [Cu3L6(H2O)6](6+) (the S6 symmetry point group), in which neighbouring copper(ii) cations are linked by three ligands L via tetrazole ring N(3),N(4) bridges; central and terminal metal ions show octahedral CuN6 and CuN3O3 coordination cores, respectively. The temperature-dependent magnetic susceptibility measurements of complex 2 revealed that the copper(ii) ions were weakly ferromagnetically coupled showing a coupling constant J of 2.2 cm(-1) {H = -2J(S1S2 + S2S3)}. The quantum-chemical investigation of the electronic structure and basicity of ligand L was carried out.

catena-poly[[tetrakis(2-allyltetrazole-kappaN4)-tetra-mu-chloro-tricopper(II)]-di-mu-chloro].

In the crystal structure of the title compound, [Cu(3)Cl(6)(C(4)H(6)N(4))(4)](n), there are three Cu atoms, six Cl atoms and four 2-allyltetrazole ligands in the asymmetric unit. The polyhedron of one Cu atom adopts a flattened octahedral geometry, with two 2-allyltetrazole ligands in the axial positions [Cu-N4 = 1.990 (2) and 1.991 (2) A] and four Cl atoms in the equatorial positions [Cu-Cl = 2.4331 (9)-2.5426 (9) A]. The polyhedra of the other two Cu atoms have a square-pyramidal geometry, with three basal sites occupied by Cl atoms [Cu-Cl = 2.2487 (9)-2.3163 (8) and 2.2569 (9)-2.3034 (9) A] and one basal site occupied by a 2-allyltetrazole ligand [Cu-N4 = 2.028 (2) and 2.013 (2) A]. A Cl atom lies in the apical position of either pyramid [Cu-Cl = 2.8360 (10) and 2.8046 (9) A]. The possibility of including the tetrazole N3 atoms in the coordination sphere of the two Cu atoms is discussed. Neighbouring copper polyhedra share their edges with Cl atoms to form one-dimensional polymeric chains running along the a axis.

Two derivatives of 5-aminotetrazole: 5-amino-1-phenyltetrazole and 5-amino-1-(1-naphthyl)tetrazole.

In the molecules of 5-amino-1-phenyltetrazole, C(7)H(7)N(5), (I), and 5-amino-1-(1-naphthyl)tetrazole, C(11)H(9)N(5), (II), the tetrazole rings and aryl fragments are not coplanar; corresponding dihedral angles are 50.58 (5) and 45.19 (7) degrees for the two independent molecules of (I), and 64.14 (5) degrees for (II). Intermolecular N-H.N hydrogen bonds between the amino groups and tetrazole N atoms are primarily responsible for formation of two-dimensional networks extending parallel to the bc plane in both compounds. The presence of the amino group has a distinct effect on the geometry of the tetrazole rings in each case.