Chiroptical activity of benzannulated N-heterocyclic carbene rhenium(I) tricarbonyl halide complexes: towards efficient circularly polarized luminescence emitters.

The design of enantiomerically pure circularly polarized luminescent (CPL) emitters would enormously benefit from the accurate and in-depth interpretation of the chiroptical properties by means of jointly (chiroptical) photophysical measurements and state-of-the-art theoretical investigation. Herein, computed and experimental (chiro-)optical properties of a series of eight enantiopure phosphorescent rhenium(I) tricarbonyl complexes are systematically compared in terms of electronic circular dichroism (ECD) and CPL. The compounds have general formula fac-[ReX(CO)3(N^CNHC)], where N^CNHC is a pyridyl benzannulated N-heterocyclic carbene deriving from a (substituted) 2-(pyridin-2-yl)imidazo[1,5-a]pyridin-2-ium proligand and X = Cl, Br and I, and display structured red phosphorescence with long-lived (τ = 7.0-19.1 µs) excited-state lifetime and dissymmetry factors |gLum| up to 4 × 10-3. The mixing of the character of the lowest-lying emitting triplet excited state is finely modulated between ligand centred (3LC), metal-to-ligand charge transfer (3MLCT) and halogen-to-ligand charge transfer (3XLCT) by the nature of the ancillary halogen and the chromophoric N^CNHC ligand. The study unravels the effect exerted by the nature of the excited state onto the ECD and CPL activity and will help to pave the way to construct efficient CPL emitters by chemical design.

Biphenyl Au(III) Complexes with Phosphine Ancillary Ligands: Synthesis, Optical Properties, and Electroluminescence in Light-Emitting Electrochemical Cells.

A series of ten cationic complexes of the general formula [(C^C)Au(P^P)]X, where C^C = 4,4'-di-tert-butyl-1,1'-biphenyl, P^P is a diphosphine ligand, and X is a noncoordinating counteranion, have been synthesized and fully characterized by means of chemical and X-ray structural methods. All the complexes display a remarkable switch-on of the emission properties when going from a fluid solution to a solid state. In the latter, long-lived emission with lifetime τ = 1.8-83.0 µs and maximum in the green-yellow region is achieved with moderate to high photoluminescence quantum yield (PLQY). This emission is ascribed to an excited state with a mainly triplet ligand-centered (3LC) nature. This effect strongly indicates that rigidification of the environment helps to suppress nonradiative decay, which is mainly attributed to the large molecular distortion in the excited state, as supported by density functional theory (DFT) and time-dependent DFT (TD-DFT) computation. In addition, quenching intermolecular interactions of the emitter are avoided thanks to the steric hindrance of the substituents. Emissive properties are therefore restored efficiently. The influence of both diphosphine and anion has been investigated and rationalized as well. Using two complexes as examples and owing to their enhanced optical properties in the solid state, the first proof-of-concept of the use of gold(III) complexes as electroactive materials for the fabrication of light-emitting electrochemical cell (LEC) devices is herein demonstrated. The LECs achieve peak external quantum efficiency, current efficiency, and power efficiency up to ca. 1%, 2.6 cd A-1, and 1.1 lm W-1 for complex 1PF6 and 0.9%, 2.5 cd A-1, and 0.7 lm W-1 for complex 3, showing the potential use of these novel emitters as electroactive compounds in LEC devices.

Binuclear Copper(I) Complexes for Near-Infrared Light-Emitting Electrochemical Cells.

Two binuclear heteroleptic CuI complexes, namely Cu-NIR1 and Cu-NIR2, bearing rigid chelating diphosphines and π-conjugated 2,5-di(pyridin-2-yl)thiazolo[5,4-d]thiazole as the bis-bidentate ligand are presented. The proposed dinuclearization strategy yields a large bathochromic shift of the emission when compared to the mononuclear counterparts (M1-M2) and enables shifting luminescence into the near-infrared (NIR) region in both solution and solid state, showing emission maximum at ca. 750 and 712 nm, respectively. The radiative process is assigned to an excited state with triplet metal-to-ligand charge transfer (3 MLCT) character as demonstrated by in-depth photophysical and computational investigation. Noteworthy, X-ray analysis of the binuclear complexes unravels two interligand π-π-stacking interactions yielding a doubly locked structure that disfavours flattening of the tetrahedral coordination around the CuI centre in the excited state and maintain enhanced NIR luminescence. No such interaction is present in M1-M2. These findings prompt the successful use of Cu-NIR1 and Cu-NIR2 in NIR light-emitting electrochemical cells (LECs), which display electroluminescence maximum up to 756 nm and peak external quantum efficiency (EQE) of 0.43 %. Their suitability for the fabrication of white-emitting LECs is also demonstrated. To the best of our knowledge, these are the first examples of NIR electroluminescent devices based on earth-abundant CuI emitters.

Phosphorescent Cationic Heterodinuclear IrIII /MI Complexes (M=CuI , AuI ) with a Hybrid Janus-Type N-Heterocyclic Carbene Bridge.

A novel class of phosphorescent cationic heterobimetallic IrIII /MI complexes, where MI =CuI (4) and AuI (5), is reported. The two metal centers are connected by the hybrid bridging 1,3-dimesityl-5-acetylimidazol-2-ylidene-4-olate (IMesAcac) ligand that combines both a chelating acetylacetonato-like and a monodentate N-heterocyclic carbene site coordinated onto an IrIII and a MI center, respectively. Complexes 4 and 5 have been prepared straightforwardly by a stepwise site-selective metalation with the zwitterionic [(IPr)MI (IMesAcac)] metalloproligand (IPr=1,3-(2,6-diisopropylphenyl)-2H-imidazol-2-ylidene) and they have been fully characterized by spectroscopic, electrochemical, and computational investigation. Complexes 4 and 5 display intense red emission arising from a low-energy excited state that is located onto the "Ir(C^N)" moiety featuring an admixed triplet ligand-centered/metal-to-ligand charge transfer (3 IL/1 MLCT) character. Comparison with the benchmark mononuclear complexes reveals negligible electronic coupling between the two distal metal centers at the electronic ground state. The bimetallic systems display enhanced photophysical properties in comparison with the parental congeners. Noteworthy, similar non-radiative rate constants have been determined along with a two-fold increase of radiative rate, yielding brightly red-emitting cyclometalating IrIII complexes. This finding is ascribed to the increased MLCT character of the emitting state in complexes 4 and 5 due to the smaller energy gap between the 3 IL and 1 MLCT manifolds, which mix via spin-orbit coupling.

Recent advances in phosphorescent platinum complexes for organic light-emitting diodes.

Phosphorescent organometallic compounds based on heavy transition metal complexes (TMCs) are an appealing research topic of enormous current interest. Amongst all different fields in which they found valuable application, development of emitting materials based on TMCs have become crucial for electroluminescent devices such as phosphorescent organic light-emitting diodes (PhOLEDs) and light-emitting electrochemical cells (LEECs). This interest is driven by the fact that luminescent TMCs with long-lived excited state lifetimes are able to efficiently harvest both singlet and triplet electro-generated excitons, thus opening the possibility to achieve theoretically 100% internal quantum efficiency in such devices. In the recent past, various classes of compounds have been reported, possessing a beautiful structural variety that allowed to nicely obtain efficient photo- and electroluminescence with high colour purity in the red, green and blue (RGB) portions of the visible spectrum. In addition, achievement of efficient emission beyond such range towards ultraviolet (UV) and near infrared (NIR) regions was also challenged. By employing TMCs as triplet emitters in OLEDs, remarkably high device performances were demonstrated, with square planar platinum(II) complexes bearing π-conjugated chromophoric ligands playing a key role in such respect. In this contribution, the most recent and promising trends in the field of phosphorescent platinum complexes will be reviewed and discussed. In particular, the importance of proper molecular design that underpins the successful achievement of improved photophysical features and enhanced device performances will be highlighted. Special emphasis will be devoted to those recent systems that have been employed as triplet emitters in efficient PhOLEDs.

Light-Induced Contraction/Expansion of 1D Photoswitchable Metallopolymer Monitored at the Solid-Liquid Interface.

The use of a bottom-up approach to the fabrication of nanopatterned functional surfaces, which are capable to respond to external stimuli, is of great current interest. Herein, the preparation of light-responsive, linear supramolecular metallopolymers constituted by the ideally infinite repetition of a ditopic ligand bearing an azoaryl moiety and Co(II) coordination nodes is described. The supramolecular polymerization process is followed by optical spectroscopy in dimethylformamide solution. Noteworthy, a submolecularly resolved scanning tunneling microscopy (STM) study of the in situ reversible trans-to-cis photoisomerization of a photoswitchable metallopolymer that self-assembles into 2D crystalline patterns onto a highly oriented pyrolytic graphite surface is achieved for the first time. The STM analysis of the nanopatterned surfaces is corroborated by modeling the physisorbed species onto a graphene slab before and after irradiation by means of density functional theory calculation. Significantly, switching of the monolayers consisting of supramolecular Co(II) metallopolymer bearing trans-azoaryl units to a novel pattern based on cis isomers can be triggered by UV light and reversed back to the trans conformer by using visible light, thereby restoring the trans-based supramolecular 2D packing. These findings represent a step forward toward the design and preparation of photoresponsive "smart" surfaces organized with an atomic precision.

Metal-Containing Polymers as Light-Emitting and Light-Responsive Materials and Beyond.

Functional materials that respond to external stimuli are of major current interest. In particular, supramolecular systems that can interact with their surroundings, adapt to environmental changes and evolve with are even more fascinating, yet challenging. Combining the rich physico-chemical properties featured by metal centres with characteristics typical of classical organic polymers, metallopolymers or metallo-supramolecular polymers can be prepared, depending on their static versus dynamic structural features. Additionally, multiple and orthogonal functionalities can be encoded in their chemical structure affording materials with widespread potential applications to be employed as "smart" materials for advanced technologies. In this Concept article, selected examples of metal-containing polymers will be described demonstrating large potentialities of such systems for creating stimuli-responsive materials with special emphasis for those showing optical applications.

Chiral Amplification by Self-Assembly of Neutral Luminescent Platinum(II) Complexes.

Two novel enantiomerically pure chiral ligands and the corresponding neutral PtII complexes have been synthetized and characterized. The self-assembly properties of the complexes have been investigated using different morphological and photophysical techniques. The two enantiomeric complexes, 4 a and 4 b, show high tendency to self-assemble into chiral supramolecular aggregates with right (P) and left-handed (M) helical configurations, respectively, as proven by SEM and absorption circular dichroism. The formation of such organized structures is driven by the formation of metallophilic and π-π interactions between spatially close Pt complexes with an enhancement of the chiro-optical properties in the solid state.

Glyco-functionalized dinuclear rhenium(i) complexes for cell imaging.

The design, synthesis and photophysical characterization of four new luminescent glycosylated luminophores based on dinuclear rhenium complexes, namely Glyco-Re, are described. The derivatives have the general formula [Re2(µ-Cl)2(CO)6(µ-pydz-R)] (R-pydz = functionalized 1,2-pyridazine), where a sugar residue (R) is covalently bound to the pyridazine ligand in the ß position. Different synthetic pathways have been investigated including the so-called neo-glycorandomization procedure, affording stereoselectively glyco-conjugates containing glucose and maltose in a ß anomeric configuration. A multivalent dinuclear rhenium glycodendron bearing three glucose units is also synthesized. All the Glyco-Re conjugates are comprehensively characterized and their photophysical properties and cellular internalization experiments on human cervical adenocarcinoma (HeLa) cells are reported. The results show that such Glyco-Re complexes display interesting bio-imaging properties, i.e. high cell permeability, organelle selectivity, low cytotoxicity and fast internalization. These findings make the presented Glyco-Re derivatives efficient phosphorescent probes suitable for cell imaging application.

Amphiphilic Metallopolymers for Photoswitchable Supramolecular Hydrogels.

A series of amphiphilic metallopolymers is described that features zinc(II) bis-terpyridine coordination nodes as well as a backbone with hydrophobic azoaryl moieties and hydrophilic phenylene-ethynylene units decorated with PEG brushes. Using such metallopolymers at very low concentration, stable, photo-responsive and self-healing hydrogels are obtained. UV irradiation of the gel allows modulation of the degree of hydrophobic π-π interactions between photoisomerizable azoaryl units and a polarity switch that overall induces a fast gel-to-sol transition. Finally, the material phase can be readily and fully restored to the thermodynamically stable state either thermally or photochemically by using visible light. The presented strategy can be further generalized towards modular supramolecular metallopolymers for injectable gels in drug delivery and bio-engineering applications.

Bonding, Luminescence, Metallophilicity in Linear Au3 and Au2Ag Chains Stabilized by Rigid Diphosphanyl NHC Ligands.

The heterofunctional and rigid ligand N,N'-diphosphanyl-imidazol-2-ylidene (PCNHCP; P = P(t-Bu)2), through its phosphorus and two N-heterocyclic carbene (NHC) donors, stabilizes trinuclear chain complexes, with either Au3 or AgAu2 cores, and dinuclear Au2 complexes. The two oppositely situated PCNHCP (L) ligands that "sandwich" the metal chain can support linear and rigid structures, as found in the known tricationic Au(I) complex [Au3(µ3-PCNHCP,κP,κCNHC,κP)2](OTf)3 (OTf = CF3SO3; [Au3L2](OTf)3; Chem. Commun. 2014, 50, 103-105) now also obtained by transmetalation from [Ag3(µ3-PCNHCP,κP,κCNHC,κP)2](OTf)3 ([Ag3L2](OTf)3), or in the mixed-metal tricationic [Au2Ag(µ3-PCNHCP,κP,κCNHC,κP)2](OTf)3 ([Au2AgL2](OTf)3). The latter was obtained stepwise by the addition of AgOTf to the digold(I) complex [Au2(µ2-PCNHCP,κP,κCNHC)2](OTf)2 ([Au2L2](OTf)2). The latter contains two dangling P donors and displays fluxional behavior in solution, and the Au···Au separation of 2.8320(6) Å in the solid state is consistent with metallophilic interactions. In the solvento complex [Au3Cl2(tht)(µ3-PCNHCP,κP,κCNHC,κP)](OTf)·MeCN ([Au3Cl2(tht)L](OTf)·MeCN), which contains only one L and one tht ligand (tht = tetrahydrothiophene), the metal chain is bent (148.94(2)°), and the longer Au···Au separation (2.9710(4) Å) is in line with relaxation of the rigidity due to a more "open" structure. Similar features were observed in [Au3Cl2(SMe2)L](OTf)·2MeCN. A detailed study of the emission properties of [Au3L2](OTf)3, [Au3Cl2(tht)L](OTf)·MeCN, [Au2L2](OTf)2, and [Au2AgL2](OTf)3 was performed by means of steady state and time-resolved photophysical techniques. The complex [Au3L2](OTf)3 displays a bright (photoluminescence quantum yield = 80%) and narrow emission band centered at 446 nm with a relatively small Stokes' shift and long-lived excited-state lifetime on the microsecond timescale, both in solution and in the solid state. In line with the very narrow emission profile centered in the violet-blue region, fabrication of organic light-emitting devices (OLEDs) comprising the [Au3L2](OTf)3 complex demonstrated its usefulness as a deep-blue emitter in solution-processed OLEDs. Electrochemical and Raman spectroscopic studies were also performed on [Au3L2](OTf)3. Experimental results were rationalized by means of Wave-Function Theory (WFT) and Density Functional Theory (DFT). MP2 calculations gave a satisfactory description of the structures of the cationic complexes [Au3L2](3+) and [Au2L2](2+) and pointed to Au···Au interactions having an electrostatic component owing to the dissimilar charge distribution in the chain caused by the heterofunctional ligand. The nature of the emitting states and their geometric distortions relative to the ground states in [Au3L2](3+) and [Au2L2](2+) was studied by DFT, revealing contraction of the Au···Au distances and coordination geometry changes by association of the dangling P donor, respectively.

Light-Powered Self-Healable Metallosupramolecular Soft Actuators.

Supramolecular functional materials able to respond to external stimuli have several advantages over their classical covalent counterparts. The preparation of soft actuators with the ability to respond to external stimuli in a spatiotemporal fashion, to self-repair, and to show directional motion, is currently one of the most challenging research goals. Herein, we report a series of metallopolymers based on zinc(II)-terpyridine coordination nodes and bearing photoisomerizable diazobenzene units and/or solubilizing luminescent phenylene-ethynylene moieties. These supramolecular polymers act as powerful gelating agents at low critical gelation concentrations. The resulting multiresponsive organogels display light-triggered mechanical actuation and luminescent properties. Furthermore, owing to the presence of dynamic coordinating bonds, they show self-healing abilities.

A Bis(Diphosphanyl N-Heterocyclic Carbene) Gold Complex: A Synthon for Luminescent Rigid AuAg2 Arrays and Au5 and Cu6 Double Arrays.

A mononuclear bis(NHC)/Au(I) (NHC=N-heterocyclic carbene) cationic complex with a rigid bis(phosphane)-functionalized NHC ligand (PC(NHC)P) was used to construct linear Au3 and Ag2 Au arrays, a Au5 cluster with two intersecting crosslike Au3 arrays, and an unprecedented Cu6 complex with two parallel Cu3 arrays. The impact of metallophilic interactions on photoluminescence was studied experimentally.

Nanopatterning of Surfaces with Monometallic and Heterobimetallic 1D Coordination Polymers: A Molecular Tectonics Approach at the Solid/Liquid Interface.

The self-assembly of multiple molecular components into complex supramolecular architectures is ubiquitous in nature and constitutes one of the most powerful strategies to fabricate multifunctional nanomaterials making use of the bottom-up approach. When spatial confinement in two dimensions on a solid substrate is employed, this approach can be exploited to generate periodically ordered structures from suitably designed molecular tectons. In this study we demonstrate that physisorbed directional periodic arrays of monometallic or heterobimetallic coordination polymers can be generated on a highly oriented pyrolitic graphite surface by combinations of a suitably designed directional organic tecton or metallatecton based on a porphyrin or nickel(II) metalloporphyrin backbone bearing both a pyridyl unit and a terpyridyl unit acting as coordinating sites for CoCl2. The periodic architectures were visualized at the solid/liquid interface with a submolecular resolution by scanning tunneling microscopy and corroborated by combined density functional and time-dependent density functional theory calculations. The capacity to nanopattern the surface for the first time with two distinct metallic centers exhibiting different electronic and optical properties is a key step toward the bottom-up construction of robust multicomponent and, thus, multifunctional molecular nanostructures and nanodevices.

When self-assembly meets biology: luminescent platinum complexes for imaging applications.

Luminescent platinum complexes have attractive chemical and photophysical properties such as high stability, emission in the visible region, high emission quantum yields and long excited state lifetimes. However the absorption spectrum of the compounds in the UV region, preventing their excitation in the harmless visible/red region, as well as the strong quenching of the luminescent triplet state, caused by dioxygen in water and biological fluids, reduces their possible applications for imaging. Therefore a possible solution to these drawbacks is to take advantage of the high tendency of such square planar compounds to self-assemble in supramolecular structures. The assemblies can be considered new chemical species with enhanced and tunable properties. Furthermore the assembly and disassembly process can be explored as a tool to obtain dynamic labels that can be applied in biomedicine. The change in color, the turn on and off of luminescence but also of the reactivity, the protection from quenching and environmental degradation are some of the attractive properties connected to the aggregation of the complexes.

Synthesis, structure, and optical properties of Pt(II) and Pd(II) complexes with oxazolyl- and pyridyl-functionalized DPPM-type ligands: a combined experimental and theoretical study.

New square-planar complexes [Pt(1(-H))2] (2a) [1(-H) = (oxazolin-2-yl)bis(diphenylphosphino)methanide] and [Pd(1(-H))2] (2b), of general formula [M{(Ph2P)2C---C---NCH2CH2O}2] (M = Pt, 2a; M = Pd, 2b), result from deprotonation of 2-{bis(diphenylphosphino)methyl}oxazoline (1) at the PCHP site. The new, functionalized dppm-type ligand 4-{bis(diphenylphosphino)methyl}pyridine, (Ph2P)2CH(4-C5H4N) (4), was prepared by double lithiation and phosphorylation of 4-picoline. In the presence of NEt3, the reactions of 2 equiv of 4 with [PtCl2(NCPh)2] and [Pd(acac)2] (acac = acetylacetonate) afforded [Pt(4(-H))2] (5a) [4(-H) = bis(diphenylphosphino)(pyridin-4-yl)methanide] and [Pd(4(-H))2] (5b), of general formula [M{(Ph2P)2C(4-C5H4N)}2] (M = Pt, 5a; M = Pd, 5b), respectively. In the absence of base, the reactions of 2 equiv of 4 with [PtCl2(NCPh)2] and [PdCl2(NCPh)2] afforded (5a·2HCl) (6a) and (5b·2HCl) (6b), respectively, in which the PCHP proton of 4 has migrated from carbon to nitrogen to give a pyridinium derivative of general formula [M{(Ph2P)2C(4-C5H4NH)}2]Cl2 (M = Pt, 6a; M = Pd, 6b). The complexes 3a, 5a·2MeOH, and 6b·4CH2Cl2 have been structurally characterized by X-ray diffraction. The absorption/emission properties of the Pt(II) complexes 2a and 5a and the Pd(II) complexes 2b and 5b have been investigated by UV-vis spectroscopy and theoretical analysis based on density functional theory. The UV-vis absorption spectra of the neutral complexes recorded in dilute N,N'-dimethylformamide solutions are dominated by intense spin-allowed intraligand transitions in the region below 350 nm. The complexes exhibit charge-transfer bands between 350 and 500 nm. The experimental and theoretical absorption spectra agree qualitatively and point to two low-lying ligand-to-metal charge transfer states that contribute to the bands observed between 350 and 500 nm. The complexes are emissive in frozen solutions at 77 K, in the pure solid state, and when doped into films of poly(methyl methacrylate) but are nonemissive in solution. A red shift is observed when Pt(II) is replaced by Pd(II).

Photofunctional nanomodulators for bioexcitation.

A single organism comprises diverse types of cells. To acquire a detailed understanding of the biological functions of each cell, comprehensive control and analysis of homeostatic processes at the single-cell level are required. In this study, we develop a new type of light-driven nanomodulator comprising dye-functionalized carbon nanohorns (CNHs) that generate heat and reactive oxygen species under biologically transparent near-infrared (NIR) laser irradiation. By exploiting the physicochemical properties of the nanohorns, cellular calcium ion flux and membrane currents were successfully controlled at the single-cell level. In addition, the nanomodulator allows a remote bioexcitation of tissues during NIR laser exposure making this system a powerful tool for single-cell analyses and innovative cell therapies.

A stable and true-blue emissive hexacoordinate Si(IV) N-heterocyclic carbene complex and its use in organic light-emitting diodes.

A neutral hexacoordinate Si(IV) complex containing two tridentate N-heterocyclic carbene ligands is synthesised and characterized by X-ray crystallography, optical spectroscopy, electrochemistry and computational methods. The stable compound exhibits remarkable deep-blue photoluminescence particularly in the solid state, which enables its use as an electroluminescent material in organic light-emitting diodes.

Unraveling orbital hybridization of triplet emitters at the metal-organic interface.

We have investigated the structural and electronic properties of phosphorescent planar platinum(II) complexes at the interface of Au(111) with submolecular resolution using combined scanning tunneling microscopy and spectroscopy as well as density functional theory. Our analysis shows that molecule-substrate coupling and lateral intermolecular interactions are weak. While the ligand orbitals remain essentially unchanged upon contact with the substrate, we found modified electronic behavior at the Pt atom due to local hybridization and charge transfer to the substrate. Thus, this novel class of phosphorescent molecules exhibits well-defined and tunable interaction with its local environment.

Efficient near-UV emitters based on cationic bis-pincer iridium(III) carbene complexes.

We report on the photophysical studies of two cationic near-UV emitters based on bis-pincer Ir(III) carbene complexes: [Ir(nBu)(C(NHC)(Me)CC(NHC))2]X, where Ir(nBu)(C(NHC)(Me)CC(NHC)) is (4,6-dimethyl-1,3-phenylene-κC(2))bis(1-butylimidazol-2-ylidene) and X = I(-) or PF6(-)). The compounds are highly emitting in deaerated CH3CN solution with emission maxima at 384 and 406 nm, and photoluminescence quantum yields of 0.41 and 0.38, for [Ir(nBu)(C(NHC)(Me)CC(NHC))2]I and Ir(nBu)(C(NHC)(Me)CC(NHC))2]PF6, respectively. In order to gain deeper understandings into their structural and electronic features, as well as to ascertain the nature of the excited states involved into the electronic absorption processes, density functional theory (DFT) and time-dependent DFT (TD-DFT) calculations have been performed on the ground and excited states of the closely related complex [Ir(Me)(C(NHC)(Me)CC(NHC))2](+). In the solid state, an emission at low energy is observed (λ(max) = 500 nm) for both complexes. However, the intensity of the emission at high energy versus the intensity of the new emission at low energy is dependent on the nature of counterions. The origin of this emission is not completely clear, but the experimental data point to the formation of trapping sites induced by aggregation processes involving the interaction between the cationic emitter and the counterion.