Laboratory Hyperspectral Image Acquisition System Setup and Validation.

Hyperspectral Imaging (HSI) techniques have demonstrated potential to provide useful information in a broad set of applications in different domains, from precision agriculture to environmental science. A first step in the preparation of the algorithms to be employed outdoors starts at a laboratory level, capturing a high amount of samples to be analysed and processed in order to extract the necessary information about the spectral characteristics of the studied samples in the most precise way. In this article, a custom-made scanning system for hyperspectral image acquisition is described. Commercially available components have been carefully selected in order to be integrated into a flexible infrastructure able to obtain data from any Generic Interface for Cameras (GenICam) compliant devices using the gigabyte Ethernet interface. The entire setup has been tested using the Specim FX hyperspectral series (FX10 and FX17) and a Graphical User Interface (GUI) has been developed in order to control the individual components and visualise data. Morphological analysis, spectral response and optical aberration of these pushbroom-type hyperspectral cameras have been evaluated prior to the validation of the whole system with different plastic samples for which spectral signatures are extracted and compared with well-known spectral libraries.

A Multispectral Camera Development: From the Prototype Assembly until Its Use in a UAV System.

Multispectral imaging (MI) techniques are being used very often to identify different properties of nature in several domains, going from precision agriculture to environmental studies, not to mention quality inspection of pharmaceutical production, art restoration, biochemistry, forensic sciences or geology, just to name some. Different implementations are commercially available from the industry and yet there is quite an interest from the scientific community to spread its use to the majority of society by means of cost effectiveness and ease of use for solutions. These devices make the most sense when combined with unmanned aerial vehicles (UAVs), going a step further and alleviating repetitive routines which could be strenuous if traditional methods were adopted. In this work, a low cost and modular solution for a multispectral camera is presented, based on the use of a single panchromatic complementary metal oxide semiconductor (CMOS) sensor combined with a rotating wheel of interchangeable band pass optic filters. The system is compatible with open source hardware permitting one to capture, process, store and/or transmit data if needed. In addition, a calibration and characterization methodology has been developed for the camera, allowing not only for quantifying its performance, but also able to characterize other CMOS sensors in the market in order to select the one that best suits the budget and application. The process was experimentally validated by mounting the camera in a Dji Matrice 600 UAV to uncover vegetation indices in a reduced area of palm trees plantation. Results are presented for the normalized difference vegetation index (NDVI) showing a generated colored map with the captured information.

Body composition assessment with ultrasound muscle measurement: optimization through the use of semi-automated tools in colorectal cancer.

Colorectal cancer (CRC) is a disease with a high prevalence and major impact on global health. Body composition (BC) data are of great importance in the assessment of nutritional status. Ultrasound (US) is an emerging, accessible and non-invasive technique that could be an alternative when it is not feasible to perform computed tomography (CT). The aim of this study is to evaluate the correlation between CT, as a reference technique, and US of the rectus femoris (RF) as a "proof of concept," in a cohort of patients with CRC and assess the optimisation of results obtained by US when performed by our new semi-automated tool. A single-centre cross-sectional study including 174 patients diagnosed with CRC and undergoing surgery was carried out at the Vall d'Hebron Hospital. We found a strong correlation between CT and US of the RF area (r = 0.67; p < 0.005). The latter, is able to discriminate patients with worse prognosis in terms of length of hospital stay and discharge destination (AUC-ROC = 0.64, p 0.015). These results improve when they are carried out with the automatic tool (area AUC-ROC = 0.73, p 0.023), especially when normalised by height and eliminating patients who associate overflow. According to our results, the US could be considered as a valuable alternative for the quantitative assessment of muscle mass when CT is not feasible. These measurements are improved when measuring software is applied, such as "Bat" software.

Pharmaceutical and personal care product residues in a macrophyte pond-constructed wetland treating wastewater from a university campus: Presence, removal and ecological risk assessment.

Pharmaceuticals and personal care products (PPCPs) constitute a group of chemicals of concern because of their potential toxicity when reaching aquatic environments. Wastewaters are one of the main pathways of introduction into the environment of the chemical compounds used in PPCPs because, in most cases, wastewater treatment facilities are not 100% efficient in their removal. This problem is accentuated in rural zones and isolated communities where conventional treatment systems are too expensive to build and operate. Waste-stabilization ponds and constructed wetlands (CWs) are natural wastewater treatment systems which are used to improve the quality of sewage from small communities because of their low cost and easy maintenance. There is growing interest in combining the two technologies to make a more robust system, taking into account their respective strengths and weaknesses. In this work, a combined macrophyte pond-CW system was evaluated for the presence at three sampling points (influent, pond effluent and CW effluent) of fifteen steroid hormones and six benzotriazole ultraviolet stabilizers (BUVSs). None of the targeted BUVS compounds were detected in either the influent or effluent, probably because of the particular characteristics of the population served by the wastewater system. In contrast, eight different steroid hormone compounds were detected at concentrations ranging from 17.3 to 247.7 ng·L-1 in influent samples and from 8.1 to 22.1 ng·L-1 in final effluent samples. The pond-CW system showed high elimination rates of steroid hormone residues with average removal efficiencies of over 77%. This efficacy was confirmed in the ecological risk assessment evaluation that was performed. Final effluents showed a low ecological risk associated with steroid hormones in contrast to the medium-high ecological risks found in the influent samples.

Influence of Workload on Primary Care Nurses' Health and Burnout, Patients' Safety, and Quality of Care: Integrative Review.

The increase in the demand for care has not led to a proportional growth in the number of primary care nurses. This imbalance is related to the decrease in the quality of care and patient safety, and also to the impact on the health of the professional group. The objective of this study is to identify relationships between overload, illness of the nurse, professional exhaustion, quality and safety in the services; and differentiate study methods and instruments for measuring the phenomena. For this, a comprehensive and structured review of the literature following the scoping review model is performed. The studies on which this review is based allow us to recognize that the scope of this phenomenon is global. The review includes 45 studies that show that there is a high pressure of care for Primary Care nursing, who suffer many alterations of their health due to burnout syndrome and that this situation contributes to the impairment of the quality of care and patient safety. However, for future lines, new evidence is needed to determine the degree of relationship between the high pressure suffered by Primary Care nursing and the attainment of health goals for professionals and patients.

Study on the removal of hormones from domestic wastewaters with lab-scale constructed wetlands with different substrates and flow directions.

Eight wastewater samples from a university campus were analysed between May and July of 2014 to determine the concentration of 14 natural and synthetic steroid hormones. An on-line solid-phase extraction combined with ultra-high performance liquid chromatography coupled with mass spectrometry (on-line SPE-UHPLC-MS/MS) was used as extraction, pre-concentration and detection method. In the samples studied, three oestrogens (17ß-estradiol, estrone and estriol), two androgens (boldenone and testosterone), three progestogens (norgestrel, progesterone and norethisterone) and one glucocorticoid (prednisone) were detected. The removal of hormones was studied in primary and secondary constructed wetland mesocosms. The porous media of the primary constructed wetlands were palm tree mulch. These reactors were used to study the effect of water flow, i.e. horizontal (HF1) vs vertical (VF1). The latter was more efficient in the removal of 17ß-estradiol (HF1: 30%, VF1: 50%), estrone (HF1: 63%, VF1: 85%), estriol (100% both), testosterone (HF1: 45%, VF1: 73%), boldenone (HF1:-77%, VF1: 100%) and progesterone (HF1: 84%, VF1: 99%). The effluent of HF1 was used as influent of three secondary constructed wetland mesocosms: two double-stage vertical flow constructed wetlands, one with gravel (VF2gravel) and one with palm mulch (VF2mulch), and a mineral-based, horizontal flow constructed wetland (HFmineral). VF2mulch was the most efficient of the secondary reactors, since it achieved the complete removal of the hormones studied with the exception of 17ß-estradiol. The significantly better removal of BOD and ammonia attained by VF2mulch suggests that the better aeration of mulch favoured the more efficient removal of hormones.