A natural variation in OsDSK2a modulates plant growth and salt tolerance through phosphorylation by SnRK1A in rice.

Plants grow rapidly for maximal production under optimal conditions; however, they adopt a slower growth strategy to maintain survival when facing environmental stresses. As salt stress restricts crop architecture and grain yield, identifying genetic variations associated with growth and yield responses to salinity is critical for breeding optimal crop varieties. OsDSK2a is a pivotal modulator of plant growth and salt tolerance via the modulation of gibberellic acid (GA) metabolism; however, its regulation remains unclear. Here, we showed that OsDSK2a can be phosphorylated at the second amino acid (S2) to maintain its stability. The gene-edited mutant osdsk2aS2G showed decreased plant height and enhanced salt tolerance. SnRK1A modulated OsDSK2a-S2 phosphorylation and played a substantial role in GA metabolism. Genetic analysis indicated that SnRK1A functions upstream of OsDSK2a and affects plant growth and salt tolerance. Moreover, SnRK1A activity was suppressed under salt stress, resulting in decreased phosphorylation and abundance of OsDSK2a. Thus, SnRK1A preserves the stability of OsDSK2a to maintain plant growth under normal conditions, and reduces the abundance of OsDSK2a to limit growth under salt stress. Haplotype analysis using 3 K-RG data identified a natural variation in OsDSK2a-S2. The allele of OsDSK2a-G downregulates plant height and improves salt-inhibited grain yield. Thus, our findings revealed a new mechanism for OsDSK2a stability and provided a valuable target for crop breeding to overcome yield limitations under salinity stress.

A high-performance, sensitive, low-cost LIG/PDMS strain sensor for impact damage monitoring and localization in composite structures.

Health monitoring of composite structures in aircraft is critical, as these structures are commonly utilized in weight-sensitive areas and innovative designs that directly impact flight safety and reliability. Traditional monitoring methods have limitations in monitoring area, strain limit, and signal processing. In this paper, a multifunctional sensor has been developed using acid-treated laser-induced graphene (A-LIG) with a multi-layer three-dimensional conductive network. Compared to untreated laser-induced graphene, the sensitivity of A-LIG sensor is increased by 100%. Furthermore, PDMS is used to fill the pores, which improves the fatigue performance of the A-LIG sensor. To obtain clear monitoring results, a data conversion algorithm is provided to convert the electrical signal obtained by the sensor into a strain field contour cloud map. The impact test of the A-LIG/PDMS sensor on the carbon fiber panel of the aircraft wing box segment verifies the effectiveness of its strain sensing. This work introduces a novel approach to fabricating flexible sensors with improved sensitivity, extended strain range, and cost-effectiveness. The sensor exhibits high sensitivity (gauge factor,GF≈ 387), is low hysteresis (∼53 ms), and has a wide working range (up to 47%), and a highly stable and reproducible response over multiple test cycles (>18 000) with good switching response. It presents a promising and innovative direction for utilizing flexible sensors in the field of aircraft structural health monitoring.

Porous polyvinyl alcohol/graphene oxide composite film for strain sensing and energy-storage applications.

In this study, a flexible porous polyvinyl alcohol (PVA)/graphene oxide (GO) composite film was developed and tested for flexible strain sensing and energy-storage applications. Morphology and mechanical properties were studied; tensile strength and Young's modulus increased by 225% and 86.88%, respectively, at 0.5 wt% GO. The PVA/GO film possesses exceptional sensing ability to various mechanical strains, such as tension, compression, bending, and torsion. For example, the gauge factor of the PVA/GO film as a tensile-strain sensor was measured as 2.46 (246%). Under compression loads, the PVA/GO composite film showed piezoresistive and capacitive strain-sensing characteristics. Under 5 kPa of compression load, the relative resistance increased by 81% with a 100 msec response time; the relative capacitance increased by 160% with a 120 msec response time. The PVA/GO strain sensor exhibited high durability and reliability over 20 × 103cycles of tensile strain and bending at 3.33 Hz. Moreover, the PVA/GO composite film showed good electrochemical properties due to its porous structure; the maximum capacitance was 124.7 F g-1at 0.5 wt% GO. After 20 × 103charging-discharging cycles, the capacitance retention rate was 94.45%, representing high stable capacitance performance. The results show that electrically conductive porous PVA nanocomposite films are promising candidates for strain sensing and energy-storage devices.

Thermal conductivity and mechanical performance of hexagonal boron nitride nanosheets-based epoxy adhesives.

Thermosets possess diverse physical and chemical properties and thus they are widely used in various applications such as electronic packaging, construction, and automotive industries. However, their poor thermal conductivity and weak mechanical performance jeopardize their continual spread in modern industry. In this study, boron nitride nanosheets (BNNSs) were employed to promote both mechanical and thermal properties of epoxy nanocomposites. BNNSs and their epoxy nanocomposites were fabricated usingin situsolvent ultrasonication andin situpolymerization, respectively. Thermal conductivity was enhanced by 153% increment in epoxy/BNNS nanocomposite at 7 wt% in comparison with neat epoxy. In parallel, Young's modulus, lap shear strength, fracture toughness (K1C) and energy release rate (G1C) increased by 69%, 31%, 122% and 118%, respectively at 1 wt% BNNSs. Moreover, fatigue life and strength of lap shear joints were significantly improved upon adding BNNSs. A numerical model of the single lap shear joint was developed to validate the accuracy of the material constants obtained. Epoxy/BNNS nanocomposites exhibited an outstanding mechanical performance as well as high thermal conductivity giving them merits to widen their applications in electronic and automotive industry.

Dynamic accumulation of fatty acids in duck (Anas platyrhynchos) breast muscle and its correlations with gene expression.

BACKGROUND: Fatty acid composition contributes greatly to the quality and nutritional value of meat. However, the molecular regulatory mechanisms underlying fatty acid accumulation in poultry have not yet been cleared. The aims of this study were to characterize the dynamics of fatty acid accumulation in duck breast muscle and investigate its correlations with gene expression. RESULTS: Here, we analyzed the fatty acid profile and transcriptome of breast muscle derived from Pekin ducks and mallards at the ages of 2 weeks, 4 weeks, 6 weeks and 8 weeks. Twenty fatty acids were detected in duck breast muscle, with palmitic acid (C16:0, 16.6%~ 21.1%), stearic acid (C18:0, 9.8%~ 17.7%), oleic acid (C18:1n-9, 15.7%~ 33.8%), linoleic acid (C18:2n-6, 10.8%~ 18.9%) and arachidonic acid (C20:4n-6, 11.7%~ 28.9%) as the major fatty acids. Our results showed that fatty acid composition was similar between the two breeds before 6 weeks, but the compositions diverged greatly after this point, mainly due to the stronger capacity for C16:0 and C18:1n-9 deposition in Pekin ducks. By comparing the multistage transcriptomes of Pekin ducks and mallards, we identified 2025 differentially expressed genes (DEGs). Cluster analysis of these DEGs revealed that the genes involved in oxidative phosphorylation, fatty acid degradation and the PPAR signaling pathway were upregulated in mallard at 8 weeks. Moreover, correlation analysis of the DEGs and fatty acid composition traits suggested that the DEGs involved in lipogenesis, lipolysis and fatty acid ß-oxidation may interact to influence the deposition of fatty acids in duck breast muscle. CONCLUSIONS: We reported the temporal progression of fatty acid accumulation and the dynamics of the transcriptome in breast muscle of Pekin ducks and mallards. Our results provide insights into the transcriptome regulation of fatty acid accumulation in duck breast muscle, and will facilitate improvements of fatty acid composition in duck breeding.

Thermally and electrically conductive multifunctional sensor based on epoxy/graphene composite.

Flexible electronics is expected to be one of the most active research areas in the next decade. In this study, a mechanically strong and flexible epoxy/GnP composite film was fabricated having a percolation threshold of electrical conductivity at 1.08 vol% GnPs and high thermal conductivity as 1.07 W m-1 K-1 at 10 vol% GnPs. The composite film shows high mechanical performance: Young's modulus and tensile strength were improved by 1344% and 66.7%, respectively, at 10 vol%. The film demonstrated high sensitivity to various mechanical loads: (i) it has gauge factors of 2 at strain range 0%-7% and 6 at range 7%-10%; (ii) it gives good electrical response with bending and twisting angles up to 180°; and (iii) it displays a good compressive load response up to 2 N where the absolute value of electrical resistance change increased by 71%. Furthermore, the film showed an excellent reliability up to 5.5 × 103 cycles with minor zero-point error. Above 20 °C, the film solely acts as a temperature sensor; upon cyclic temperature testing, the film demonstrated a stable resistive response in the range of 30-75 °C with a temperature sensitivity coefficient of 0.0063 °C-1. This flexible composite film has remarkable properties that enable it to be used as a full-fledged sensor for universal applications in aerospace, automotive and civil engineering.

Multifunctional, durable and highly conductive graphene/sponge nanocomposites.

Porous functional materials play important roles in a wide variety of growing research and industrial fields. We herein report a simple, effective method to prepare porous functional graphene composites for multi-field applications. Graphene sheets were non-chemically modified by Triton®X-100, not only to maintain high structural integrity but to improve the dispersion of graphene on the pore surface of a sponge. It was found that a graphene/sponge nanocomposite at 0.79 wt.% demonstrated ideal electrical conductivity. The composite materials have high strain sensitivity, stable fatigue performance for 20 000 cycles, short response time of 0.401 s and fast response to temperature and pressure. In addition, the composites are effective in monitoring materials deformation and acoustic attenuation with a maximum absorption rate 67.78% and it can be used as electrodes for a supercapacitor with capacitance of 18.1 F g-1. Moreover, no expensive materials or complex equipment are required for the composite manufacturing process. This new methodology for the fabrication of multifunctional, durable and highly conductive graphene/sponge nanocomposites hold promise for many other applications.

Elastomer nanocomposites containing MXene for mechanical robustness and electrical and thermal conductivity.

A novel 2D nanomaterial, Ti3C2Tx MXene, added conductivity and reinforcement to a common elastomer, nitrile butadiene rubber (NBR). X-ray diffraction revealed the intercalation of lithium ions and elastomer chains into the MXene interlayer spacing, which enabled exfoliation in the elastomer. The reaction between MXene and NBR was proved by a stepwise Fourier transform infrared spectroscopy. With increase in MXene fractions, electrical and thermal conductivity of the composite increased to 9 × 10-5 S cm-1 and 0.69 W m-1 K-1, respectively. At only 2.8 vol% MXene, a swelling ratio of 1.61 was achieved, representing a 75% reduction compared to NBR containing either graphene or carbon nanotubes at the same filler fraction. Tensile tests showed that with the increase in MXene content, Young's modulus increased while both tensile strength and elongation at break first increased and then decreased. Overall, latex compounding proved to be an efficient technique for forming NBR/MXene nanocomposites. The revealed reaction between MXene and NBR to create functional polymer nanocomposites could provide a platform for utilising MXene for other polymers.

Proteomics analysis of lung reveals inflammation and cell death induced by atmospheric H2S exposure in pig.

Hydrogen sulfide (H2S) is a popular toxic environmental gas and industrial pollutant, which can be harmful to multiple organ systems of both human and livestock, especially to the respiratory system. However, the injury mechanism of H2S exposure to lung remains poorly understood. In this study, pig lung was selected as a H2S exposure model for the first time. We first examined the histological damage and the mRNA expression of pro-inflammatory genes of lung in pigs exposed to H2S. Histopathology change and increased mRNA level of pro-inflammatory cytokines demonstrated that H2S exposure indeed induced inflammatory injury in the porcine lung. We then performed TMT-based quantitative proteomics analysis to probe the injury molecular mechanism. The proteomics results showed that 526 proteins have significant changes in abundance between control and H2S treated swine. Further validation analysis of some H2S responsive proteins using both Real-time quantitative PCR and western blotting demonstrated that proteomics data are reliable. KEGG pathway analysis revealed that these proteins were involved in antigen processing and presentation, complement and coagulation cascade, IL-17 signaling pathway, ferroptosis and necroptosis. Our data suggest that H2S exposure induced immune suppression, inflammatory response and cell death. These findings provide a new insight into the complexity mechanisms of H2S induced lung injury, and offer therapeutic potential as drug targets with a view towards curing the intoxication caused by H2S.

Multifunctional Graphene-Based Composite Sponge.

Although graphene has been widely used as a nano-filler to enhance the conductivity of porous materials, it is still an unsatisfactory requirement to prepare graphene-based sponge porous materials by simple and low-cost methods to enhance their mechanical properties and make them have good sensing and capacitive properties. Graphene platelets (GnPs) were prepared by the thermal expansion method. Graphene-based sponge porous materials were prepared by a simple method. A flexible sensor was formed and supercapacitors were assembled. Compared with other graphene-based composites, the graphene-based composite sponge has good electrical response under bending and torsion loading. Under 180° bending and torsion loading, the maximum resistance change rate can reach 13.9% and 52.5%, respectively. The linearity under tension is 0.01. The mechanical properties and capacitance properties of the sponge nanocomposites were optimized when the filler fraction was 1.43 wt.%. The tensile strength was 0.236 MPa and capacitance was 21.4 F/g. In cycles, the capacitance retention rate is 94.45%. The experimental results show that the graphene-based sponge porous material can be used as a multifunctional flexible sensor and supercapacitor, and it is a promising and multifunctional porous nanocomposite material.

Graphene platelets versus phosphorus compounds for elastomeric composites: flame retardancy, mechanical performance and mechanisms.

Polymers are widely used but their flammability remains a serious issue causing fatalities and property damage. Herein we present an investigation into the effectiveness of graphene platelets (GnPs) to simultaneously improve the flame retardancy and mechanical properties of ethylene propylene diene monomer rubber (EPDM). EPDM was melt compounded respectively with GnPs and a commercial flame retardant (ammonium polyphosphate, APP) to produce two groups of composites. Although both fillers were well dispersed in EPDM, GnPs significantly improved the mechanical properties of EPDM whilst APP compromised some of the mechanical properties particularly at high fractions. This difference was attributed to the filler particle size and interfacial bonding. Through cone calorimetry testing, 21 wt% char yield was recorded for the EPDM/GnP composite at 12.0 vol%, in comparison with 8 wt% for the EPDM/APP composite. APP was able to lower the peak heat release rate (PHRR) and specific mass loss rate (MLR), but unfortunately it decreased the ignition time and fire performance index (FPI). By contrast, GnPs has been found to increase ignition time by 29% and FPI by 62%, while still achieved the same level of reductions in PHRR and specific MLR, demonstrating clear advantages over APP. During combustion the highly thermally stable GnPs bonded with the viscous, degraded EPDM macromolecules, forming a thick solid char layer which prevented the transport of heat and smoke, contributing to its superior flame retarding performance over APP.

Detection of Physiological Signals Based on Graphene Using a Simple and Low-Cost Method.

Despite that graphene has been extensively used in flexible wearable sensors, it remains an unmet need to fabricate a graphene-based sensor by a simple and low-cost method. Here, graphene nanoplatelets (GNPs) are prepared by thermal expansion method, and a sensor is fabricated by sealing of a graphene sheet with polyurethane (PU) medical film. Compared with other graphene-based sensors, it greatly simplifies the fabrication process and enables the effective measurement of signals. The resistance of graphene sheet changes linearly with the deformation of the graphene sensor, which lays a solid foundation for the detection of physiological signals. A signal processing circuit is developed to output the physiological signals in the form of electrical signals. The sensor was used to measure finger bending motion signals, respiration signals and pulse wave signals. All the results demonstrate that the graphene sensor fabricated by the simple and low-cost method is a promising platform for physiological signal measurement.

Alteration in bile acids profile in Large White pigs during chronic heat exposure.

Bile acids (BAs) are critical for cholesterol homeostasis and new roles in metabolism and endocrinology have been demonstrated recently. It remains unknown whether BA metabolism can be affected by heat stress (HS). The objective of this study was to describe the shifts in serum, hepatic and intestinal BA profiles induced by chronic HS. Twenty-seven Large White pigs weighing 40.8 ±â€¯2.7 kg were assigned to one of the three treatments: a control group (CON, 23 °C), a HS group (33 °C), or a pair-fed group (PF, 23 °C and fed the same amount as HS group) for 21 d. The concentrations of taurine-conjugated BAs (TUDCA and THDCA in serum and TCDCA, TUDCA, THDCA and THCA in liver) were decreased in HS and PF pigs. However, in HS pigs, a reduction in taurine-conjugated BAs (TCBA) correlated with decreased liver genes expression of BA synthesis, conjugation and uptake transport. BA regulated-genes (FXR, TGR5 and FGFR4) in HS pigs and TGR5, FGFR4 and KLß in PF pigs were down-regulated in liver. In ileum, total BAs and glycoursodeoxycholic acid concentrations were higher in HS pigs than other groups and PF group, respectively (P < 0.05). TCBA (P = 0.01) and tauroursodeoxycholic acid (P < 0.01) were decreased in PF group. BA transporters (OSTα and MRP3) were up-regulated in HS pigs compared with CON and PF pigs, respectively (P < 0.01). In cecum, ursodeoxycholic acid was higher in HS (P = 0.02) group than CON group. The expression of apical sodium-coupled bile acid transporter (P = 0.04) was lower in HS pigs than CON pigs, while OSTß (P < 0.01) was greater in HS group than PF group. These results suggest that chronic HS suppressed liver activity of synthesis and uptake of TCBA, at least in part, which was independent of reduced feed intake.

Probing the molecular regulation of lipopolysaccharide stress in piglet liver by comparative proteomics analysis.

Lipopolysaccharide (LPS) can induce inflammatory responses in piglets, causing immunological stress and tissue damage. However, chronic LPS infection may lead to LPS-induced immunological stress resistance. The molecular mechanisms underlying LPS stress have not been fully elucidated. Here, we conducted a global comparative proteomics analysis to investigate the molecular regulation of LPS stress using an immunological stress model of weaned piglets. A shotgun-based SWATH-MS workflow was used for global proteomes of the piglet livers after 15-day LPS treatment. Out of 3700 quantified proteins, 93 proteins showed differential changes under LPS stress. Bioinformatics analysis indicated that the differentially expressed proteins were mainly involved in inflammatory response, oxidation-redox processes and defense reactions, and were enriched in a phagosome pathway. Several key proteins associated with oxidative stress (SOD2), inflammation response (STEAP4 and S100 family) and the phagosome pathway were verified by activity and targeted-MS analyses. The observed responses appear to mitigate hepatic damage due to excessive oxidative stress, inflammation, and repression of the phagosome pathway. Our results reveal that an increased STEAP4 expression in piglets appears involved in cellular regulation by LPS stress and subsequent immunological stress resistance. This study sheds new light on the mechanism of prevention and relieving injury by LPS-induced immune responses.

PEDOT-based composites as electrode materials for supercapacitors.

Poly (3, 4-ethylenedioxythiophene) (denoted PEDOT) already has a brief history of being used as an active material in supercapacitors. It has many advantages such as low-cost, flexibility, and good electrical conductivity and pseudocapacitance. However, the major drawback is low stability, which means an obvious capacitance drop after a certain number of charge-discharge cycles. Another disadvantage is its limited capacitance and this becomes an issue for industrial applications. To solve these problems, there are several approaches including the addition of conducting nanofillers to increase conductivity, and mixing or depositing metal oxide to enhance capacitance. Furthermore, expanding the surface area of PEDOT is one of the main methods to improve its performance in energy storage applications through special processes; for example using a three-dimensional substrate or preparing PEDOT aerogel through freeze drying. This paper reviews recent techniques and outcomes of PEDOT based composites for supercapacitors, as well as detailed calculations about capacitances. Finally, this paper outlines the new direction and recent challenges of PEDOT based composites for supercapacitor applications.

Elastomeric composites based on carbon nanomaterials.

Carbon nanomaterials including carbon black (CB), carbon nanotubes (CNTs) and graphene have attracted increasingly more interest in academia due to their fascinating properties. These nanomaterials can significantly improve the mechanical, electrical, thermal, barrier, and flame retardant properties of elastomers. The improvements are dependent on the molecular nature of the matrix, the intrinsic property, geometry and dispersion of the fillers, and the interface between the matrix and the fillers. In this article, we briefly described the fabrication processes of elastomer composites, illuminated the importance of keeping fillers at nanoscale in matrices, and critically reviewed the recent development of the elastomeric composites by incorporating CB, CNTs, and graphene and its derivatives. Attention has been paid to the mechanical properties and electrical and thermal conductivity. Challenges and further research are discussed at the end of the article.

Superior piezoelectric composite films: taking advantage of carbon nanomaterials.

Piezoelectric composites comprising an active phase of ferroelectric ceramic and a polymer matrix have recently found numerous sensory applications. However, it remains a major challenge to further improve their electromechanical response for advanced applications such as precision control and monitoring systems. We here investigated the incorporation of graphene platelets (GnPs) and multi-walled carbon nanotubes (MWNTs), each with various weight fractions, into PZT (lead zirconate titanate)/epoxy composites to produce three-phase nanocomposites. The nanocomposite films show markedly improved piezoelectric coefficients and electromechanical responses (50%) besides an enhancement of ~200% in stiffness. The carbon nanomaterials strengthened the impact of electric field on the PZT particles by appropriately raising the electrical conductivity of the epoxy. GnPs have been proved to be far more promising in improving the poling behavior and dynamic response than MWNTs. The superior dynamic sensitivity of GnP-reinforced composite may be caused by the GnPs' high load transfer efficiency arising from their two-dimensional geometry and good compatibility with the matrix. The reduced acoustic impedance mismatch resulting from the improved thermal conductance may also contribute to the higher sensitivity of GnP-reinforced composite. This research pointed out the potential of employing GnPs to develop highly sensitive piezoelectric composites for sensing applications.

Processable 3-nm thick graphene platelets of high electrical conductivity and their epoxy composites.

Graphene platelets (GnPs) are a class of novel 2D nanomaterials owing to their very small thickness (∼3 nm), high mechanical strength and electric conductivity (1460 S cm(-1)), and good compatibility with most polymers as well as cost-effectiveness. In this paper we present a low-cost processing technique for producing modified GnPs and an investigation of the electrical and mechanical properties of the resulting composites. After dispersing GnPs in solvent N-methyl-2-pyrrolidone, a long-chain surfactant (Jeffamine D 2000, denoted J2000) was added to covalently modify GnPs, yielding J2000-GnPs. By adjusting the ratio of GnPs to the solvent, the modified GnPs show different average thickness and thus electrical conductivity ranging from 694 to 1200 S cm(-1). To promote the exfoliation and dispersion of J2000-GnPs in a polymeric matrix, they were dispersed in the solvent again and further modified using diglycidyl ether of bisphenol A (DGEBA) producing m-GnPs, which were then compounded with an epoxy resin for the development of epoxy/m-GnP composites. A percolation threshold of electrical volume resistivity for the resulting composites was observed at 0.31 vol%. It was found that epoxy/m-GnP composites demonstrated far better mechanical properties than those of unmodified GnPs of the same volume fraction. For example, m-GnPs at 0.25 vol% increased the fracture energy release rate G1c from 0.204 ± 0.03 to 1.422 ± 0.24 kJ m(-2), while the same fraction of unmodified GnPs increased G1c to 1.01 ± 0.24 kJ m(-2). The interface modification also enhanced the glass transition temperature of neat epoxy from 58.9 to 73.8 °C.

Identification of Characteristic Bioactive Compounds in Silkie Chickens, Their Effects on Meat Quality, and Their Gene Regulatory Network.

Silkie chicken, an important chicken breed with high medicinal and nutritional value, has a long history of being used as a dietary supplement in China. However, the compounds with health-promoting effects in Silkie chickens remain unclear. In the present study, we conducted a comprehensive analysis of metabolic and lipidomic profiles to identify the characteristic bioactive compounds in Silkie chickens, using a common chicken breed as control. The results showed that the levels of 13 metabolites including estradiol, four lipid subclasses including cardiolipin (CL), eight lipid molecules, and three fatty acids including docosahexaenoic acid (C22:6) were significantly increased in Silkie chickens, which have physiological activities such as resisting chronic diseases and improving cognition. These characteristic bioactive compounds have effects on meat quality characteristics, including improving its water-holding capacity and umami taste and increasing the content of aromatic compounds and phenols. The differentially expressed genes (DEGs) between the two chicken breeds revealed the regulatory network for these characteristic bioactive compounds. Fifteen DEGs, including HSD17B1, are involved in the synthesis of characteristic metabolites. Eleven DEGs, including ELOVL2, were involved in the synthesis and transport of characteristic lipids and fatty acids. In summary, we identified characteristic bioactive compounds in Silkie chickens, and analyzed their effects on meat quality characteristics. This study provided important insight into Silkie chicken meat as a functional food.

Interplay between gut microbiota and tryptophan metabolism in type 2 diabetic mice treated with metformin.

Tryptophan (TRP) metabolites have been identified as potent biomarkers for complications of type 2 diabetes mellitus (T2DM). However, it remains unclear whether the therapeutic effect of metformin in T2DM is related to the modulation of TRP metabolic pathway. This study aims to investigate whether metformin affects TRP metabolism in T2DM mice through the gut microbiota. A liquid chromatography-tandem mass spectrometry method was established to determine 16 TRP metabolites in the serum, colon content, urine, and feces of T2DM mice, and the correlations between metabolites and the T2DM mice gut microbiota were performed. The method demonstrated acceptable linearity (R2 > 0.996), with the limit of quantification ranging from 0.29 to 69.444 nmol/L for 16 analytes, and the limit of detection ranging from 0.087 to 20.833 nmol/L. In T2DM mice, metformin treatment effectively restored levels of indole-3-lactic acid (ILA), indole-3-propionic acid (IPA), and the ILA/IPA ratio, along with several aryl hydrocarbon receptor ligands in the serum, with a notable impact in the colon but not in the urine. This restoration was accompanied by a shift in the relative abundance of Dubosiella, Turicibacter, RF39, Clostridia_UCG-014, and Alistipes. Spearman's correlation analysis revealed positive correlations between Turicibacter and Alistipes with IPA and indole-3-acetic acid. Conversely, these genera displayed negative correlations with ILA and kynurenine. In addition, our study revealed the presence of endogenous indole pathway in germ-free mice, and the impact of metformin on endogenous TRP metabolism in T2DM mice cannot be disregarded. Further research is needed to investigate the regulation of TRP metabolism by metformin. IMPORTANCE: This study provides valuable insights into the interrelationship between metformin administration, changes in the tryptophan (TRP) metabolome, and gut microbiota in type 2 diabetes mellitus (T2DM) mice. Indole-3-lactic acid (ILA)/indole-3-propionic acid (IPA) emerges as a potential biomarker for the development of T2DM and prediction of therapeutic response. While the indole metabolic pathway has long been associated exclusively with the gut microbiome, recent research has demonstrated the ability of host interleukin-4-induced-1 to metabolize TRP. The detection of indole derivatives in the serum of germ-free mice suggests the existence of inherent endogenous indole metabolic pathways. These findings deepen our understanding of metformin's efficacy in correcting TRP metabolic disorders and provide valuable directions for further investigation. Moreover, this knowledge may pave the way for the development of targeted treatment strategies for T2DM, focusing on the gut microbiome and restoration of associated TRP metabolism.