Physiological Gait versus Gait in VR on Multidirectional Treadmill-Comparative Analysis.

BACKGROUND AND OBJECTIVES: Virtual reality (VR) is increasingly often finding applications in physiotherapy and health promotion. Recent years have seen the use of advanced technologies in the promotion of physical activity (PA) in society. New simulators, e.g., treadmills, enable the performance of PA (e.g., locomotive movements) in VR (artificially created virtual world). The question of how such movements are similar to natural forms of human locomotion (march, run) inspired the comparative analysis of physiological gait and gait in VR on a multidirectional Omni treadmill. MATERIALS AND METHODS: The tests involved the use of the BTS Smart system for the triplanar analysis of motion. The test involved 10 healthy females aged 20-24 (weight: 52 ± 3.1 kg, height 162 ± 5.4 cm). Measurements were performed at two stages. The first stage involved the standard assessment of physiological gait, whereas the second was focused on gait forced by the Omni treadmill. The following gait parameters were analyzed: Flexion-extension in the ankle, knee joint and hip joint, rotation in the hip joint and knee joint, foot progression, adduction-abduction in the knee joint and hip joint, pelvic obliquity, pelvic tilt, pelvic rotation as well as energy expenditure and the movement of the body center of mass. RESULTS: The analysis of the test results revealed the existence of differences in the kinematics of physical gait and gait on the treadmill. The greatest differences were recorded in relation to the dorsal-plantar flexion in the ankle, the foot progression, the rotation of the knee joint, pelvic tilt and rotation. In addition, the gait on the treadmill is characterized by the longer duration of the stance phase and reduced ranges of the following movements: Flexion-extension in the ankle, knee joint and hip joint, adduction-abduction in the hip joint as well as rotation in the ankle and hip joint. The values of potential, kinetic and total energy recorded in relation to forced gait are significantly lower than those of physiological gait. CONCLUSIONS: Because of the fact that the parameters of gait on the Omni platform vary significantly from the parameters of physical gait, the application of the Omni treadmill in the re-education of gait during rehabilitation should be treated with considerable care. Nonetheless, the treadmill has adequate potential to become a safe simulator enabling active motion in VR using locomotive movements.

Decreased Bone Mineral Density in Forearm vs Loaded Skeletal Sites in Professional Ballet Dancers.

AIMS: To compare the differences in bone mineral density (BMD) at loaded and non-loaded skeletal sites in professional ballet dancers. We hypothesized that in both male and female elite ballet dancers, a significant difference in BMD will be observed between impact and non-impact sites. METHODS: 44 elite ballet dancers, 22 men (age 26.4±5.9 yrs) and 22 women (age 24.9±5.3 yrs), were examined. BMD measurements were performed using dual-energy x-ray absorptiometry at three skeletal sites-forearm (FA), lumbar spine (LS), and femoral neck (FN)-and analyzed using t-tests, ANOVA, and linear regression models. Information about career duration, training volume, health habits, and menstrual disorders (women) was collected. RESULTS: Z-scores for LS and FN were significantly higher in men than in women. However, Z-scores for FA were similar in men and women and fell below the expected range for age (<-2.0), and they were significantly lower than those for LS and FN. With longer career duration, a trend was observed towards lower Z-scores for FN in men and towards higher Z-scores for FA in women. CONCLUSION: In ballet dancers, FA mineralization is extremely low compared to loaded skeletal sites. Male dancers may have lowered forearm BMD despite the absence of risk factors present in female dancers (menstrual disorders). Professional ballet dancers may be at risk of local osteopenia due to the "local non-impact" characteristics of ballet dance, and use of the 33% distal radius region for the accurate assessment of bone mineral status should be investigated further in this population.

Mathematical modelling as a tool to assessment of loads in volleyball player's shoulder joint during spike.

This article deals with kinematic and kinetic conditions in volleyball attack and identifies loads in the shoulder joint. Joint angles and velocities of individual segments of upper limb were measured with the use of the motion capture system XSENS. Muscle forces and loads in skeletal system were calculated by means of mathematical model elaborated in AnyBody system. Spikes performed by players in the best and worst way were compared with each other. The relationships were found between reactions in shoulder joint and flexion/extension, abduction/adduction and rotation angles in the same joint and flexion/extension in the elbow joint. Reactions in shoulder joint varied from 591 N to 2001 N (in relation to body weight [BW] 83-328%). The analysis proved that hand velocity at the moment of the ball hit (which varied between 6.8 and 13.3 m s-1) influences on the value of reaction in joints, but positions of individual segments relative to each other are also crucial. It was also proved in objective way, that position of the upper limb during spike can be more or less harmful assuming that bigger reaction increases possibility of injury, what can be an indication for trainers and physiotherapists how to improve injury prevention.

Kinematic analysis of modern dance movement "stag jump" within the context of impact loads, injury to the locomotor system and its prevention.

BACKGROUND: This paper presents a case study of kinematic analysis of the modern dance movement known as the "stag jump". Detailed analysis of the kinematic structure of this movement as performed by the dancers, accompanied by measurements of impact forces during landing, will allow the authors to determine, in subsequent model-based research phases, the forces acting in knee joints of the lower landing limb. MATERIAL AND METHODS: Two professional modern dancers participated in the study: a male and a female. The study consisted in recording the values of ground reaction and body motion, and then determining and analyzing kinematic parameters of performed movements. RESULTS: The results of measurement of joint angles in the landing lower limb, pelvis, and foot position in relation to the ground, as well as the level of vertical components of ground reaction, provided insight into the loading response phase of the "stag jump". The measurements and obtained results show differences between the man and woman in ground reactions and kinematic quantities. CONCLUSIONS: The results obtained during the research may be used in the development and teaching of dancing movements. Training sessions, carried out in the biomechanical laboratory, with active participation of dancing teachers, could form a basis for a prevention model of injuries and physical overloads occurring within this occupational group. Primary differences in the "stag jump" performance technique probably result from the different educational path the man and the woman went through.

Ground reaction force as a factor responsible for the topography of injuries in professional dance. An analysis of three dance styles: classical dance, modern dance, and folk dance.

OBJECTIVE: The study aimed to identify the effects of ground reaction forces (GRF) recorded during landing in typical elements of three dance styles, including classical, modern, and folk dance, on injuries` topography. METHODS: The research involved a survey and measurements of GRF generated during landing after the jump. The survey involved a group of 90 professional dancers. In the questionnaire, the dancers marked areas of the human body that were affected at least once by injuries. Biomechanical tests of the GRF recording were conducted on a group of 15 professional dancers. The analysis focused on the following parameters: a maximum value of the vertical variable of the GRF relative to body weight (maxGRFz), the time between the moment from first foot contact with the ground to the moment of reaching the maxGRFz (tmaxGRFz), and the loading rate of the GRF relative to body weight (LRGRFz). RESULTS: Regardless of dance style and sex, the lower spine, knee joints, ankle joints and feet were the areas most affected by injuries among professional dancers. The level of maxGRFz, tmaxGRFz and LRGRFz during typical jumps in classical, modern, and folk dance was statistically significantly different (P<0.01*). The highest mean maxGRFz values were recorded for jumps performed by classical dancers. Furthermore, the sum of injury-affected areas differed significantly across various dance styles and was connected with the impact forces transferred by the dancer's musculoskeletal system. CONCLUSION: The level of GRF is one of the decisive factors affecting the topography of professional dance injuries.

Work-related musculoskeletal disorders in Polish sonographers-A questionnaire study.

PURPOSE: The ultrasound specialists face a substantial issue with work-related musculoskeletal disorders (WMSDs), characterized by occupation-related pain, reaching an estimated frequency of up to 90.5%. The type and location of pain vary depending on the sonographers specialty and the specific anatomical areas being examined. Our study aimed to assess the prevalence and intensity of pain among Polish doctors from various specialties conducting ultrasound examinations. MATERIALS AND METHODS: The study has been performed between July and December 2023, involving 90 participants (51.9% women) actively practicing ultrasound diagnostics. The data collection process utilized a structured questionnaire developed by the researchers for this study. The questionnaire covered personal factors, including gender and age, and work-related aspects like workplace, specialty, sonography experience, and the types of examinations conducted. Statistical analysis involved both descriptive statistics and correlation analysis. RESULTS: The age distribution ranged from 26 to 74 years, with mean (SD) of 43.1 (12.2) years. The leading specialties among physicians were radiology (22.2%) and internal medicine (22.2%). Among all physicians, 65.6% reported pain during or after ultrasound scans, with a mean (SD) pain intensity of 6.17 (2) in a 1-10 scale. The analysis indicated no correlation between age and gender and the occurrence of discomfort. CONCLUSIONS: WMSDs pose a significant risk to Polish sonographers, especially those specializing in vascular surgery, general surgery and obstetrics and gynecology specialties. The study underscores a notable deficit, with only 10% of the personnel reporting training in ergonomics for ultrasound work.

Exploring the impact of body mass change on fatigue and activity of the muscular system during daily routine.

BACKGROUND: Correct body weight is one of the factors that allows you to maintain a properly functioning body. Abnormal body weight can cause muscle tissue remodelling, affecting activity and muscle fatigue. Changes in the muscular system can cause occurrence of functional limitations. OBJECTIVE: To determine the effect of weight change on fatigue and activity of the muscular system during daily activities. METHODS: The evaluation of musculoskeletal functioning was based on the results of computer simulations conducted in the AnyBody Modeling System. The following activities were analysed: standing, sitting down and getting up from a chair, holding and lifting an object, and walking. The simulations of the activities were carried out using averaged kinematic data, and by changing body mass in the range of 50 kg to 100 kg by increments of 2 kg, to map different nutritional status from excessive thinness to extreme obesity. Identification of loads in the musculoskeletal system was based on solving an inverse dynamics problem and then the estimation of muscle force values using static optimization. The simulation results allowed to determine the value of muscle fatigue and the level of muscle activity. RESULTS: For activities (i.e., standing, walking, sitting down and getting up from a chair) it was observed that the value of muscle fatigue increases with increasing body mass. However, for activities that cause more load on the musculoskeletal system, i.e. lifting and holding an object, the highest value of muscle fatigue was observed in underweight individuals. CONCLUSION: The change in body weight alters the functioning of the muscular system and thus the ability to perform activities. It was shown that in case of underweight, overweight or obese people, abnormal body weight can be the reason for occurrence of difficulties in performing the activities of lifting and holding a 20 kg object, as well as walking.

Effect of strengthening and weakening of abdominal and dorsal muscles on lumbar spine loads in parents of disabled children.

Pain in the lower part of the back is one of the most common chronic illnesses globally. This work aimed to determine the impact of the reinforcement of particular groups of abdominal and dorsal muscles on the loads exerted on the lumbar section of the spine in 30 mothers of children with motor disabilities. An optical Ariel Performance Analysis System recorded and processed the kinematics data of everyday activities. Tests investigating the effects of the strengthening or weakening of abdominal and dorsal muscles on loading in the lumbar section of the spine utilized the AnyBody Modelling System. Input data for the simulations included mean values of body positions, while the effects of strengthening or weakening of muscles were simulated in the muscle forces model by introducing different values for muscle physiological cross-sectional area (PCSA). Simulations used decreasing or increasing PCSA values of abdominal muscles and the erector spinae. The analysis involved component and resultant force values on the lumbosacral joint (L5-S1) of the spine and intra-abdominal pressure values. The highest reduction of the resultant reaction value in L5-S1 was observed in the simulations that increased the PCSA of the transverse abdominal (TrA). Indeed, a double increase in the TrA cross-section caused a reduction of the resultant reaction in L5-S1 by 30% and the anterior-posterior and proximal-distal forces by approximately 20-30%. Increased PCSA of the erector spinae exerted higher loads on the spine. These results indicate that strengthening weakened abdominal muscles, particularly TrA, in parents of children with motor disabilities reduces lower spinal loads during daily activities.

The influence of isometric rotation of the lower limb on the functioning of the knee joint stabilizers and rotator muscles.

PURPOSE: This paper presents an assessment of the influence of isometric rotation of the lower limb in a standing position on the functioning of the muscles stabilizing the knee joint in the frontal plane with the use of modeling the loads on the musculoskeletal system. METHODS: The research was carried out in the AnyBody Modeling System software, performing multi-variant simulations of the musculoskeletal system during isometric rotation of the lower limbs. The simulations were carried out using as input data the values of rotating moments and the ground reaction forces acting on foot segments, which were measured using the proprietary Rotenso device and the position of the body segments. RESULTS: The result is the muscular activity of the lower limbs of the selected muscle groups during isometric rotation. Muscle activity was recorded for Sartorius, Tensor fasciae latae, Iliopsoas, Gluteus minimus, Gluteus medius, Gluteus maximus, Piriformis, Quadratus femoris, Obturator internus, Obturator externus, Gemellus inferior, Gemellus superior. CONCLUSIONS: Performing isometric rotation allowed for the activation of most of the knee joint stabilizing muscles and rotators of the lower limb. The results indicate that lower limb rotation exercises can be used in physiotherapy in patients with valgus knee.

Thoracic surgery may alter body static balance via diaphragm dysfunction.

Many diseases and conditions can alter an ability to maintain body balance. The aim of the present study was to investigate whether thoracic surgery may elicit diaphragm dysfunction thereby impairing postural stability. 40 patients qualified to video-assisted thoracoscopy (VATS) lobectomy or lobectomy via thoracotomy due to pulmonary carcinoma were examined two times: a day before lung resection and 3-5 days after surgical procedure. Diaphragm assessment was performed using ultrasonography, while postural sways were evaluated by Zebris FDM-S stabilometric platform. Thoracic surgery was associated with decrease of diaphragm thickness and movement, as well as, with deterioration of static body balance maintenance. Upper lobe resection was linked with greater diaphragm excursion restriction and worse body sway parameters than middle and lower lobe resection. VATS lobectomy was associated with better postoperative diaphragm function and better postural sway parameters than lobectomy via thoracotomy. Patients after lobectomy via thoracotomy had significantly more load on lower limb on the operated side than patients after VATS lobectomy. Impairment of diaphragm function is closely associated with equilibrium impairment after pulmonary resection. VATS lobectomy was less invasive than lobectomy via thoracotomy in terms of primary respiratory muscle function and body balance maintenance parameters.

A sitting or standing position - which one exerts more loads on the musculoskeletal system of the lumbar spine? Comparative tests based on the methods of mathematical modelling.

PURPOSE: The work aimed to assess the functioning of the musculoskeletal system within the lumbar spine in relation to everyday postures of sitting and standing. METHODS: The comparative analysis was based both on experimental tests and computer simulations performed in the AnyBody Modeling System environment. Input data used to prepare models were based on the information obtained in experimental tests. The test participants were tasked with adopting two postures: 1) standing position and 2) sitting position. Kinematics measurements were performed using the Zebris ultrasonic system. During sitting position, the tests additionally involved the use of a dynamometric platform measuring reaction forces occurring between buttocks and the seat. RESULTS: The comparative analysis included measurements of the trunk inclination angle and the pelvic inclination angle as well as results of computer simulations. The sitting posture is responsible for increased trunk inclination and a change in the position of the pelvis. In terms of the sitting position, it was possible to observe an increase in the loads affecting individual intervertebral joints of the lumbar spine by 155-184% in comparison with the standing posture (100%). Simulations revealed an increased muscle activity of the erector spinae, abdominal internal oblique muscles and abdominal external oblique muscles. CONCLUSIONS: Adopting a sitting position increases the loads on the lumbar spine and increases the activity of the erector spinae and abdominal muscles compared to the standing position, which is caused by change in the position of the pelvis and the curvature of the lumbar region.

How to teach safe landing after the jump? The use of biofeedback to minimize the shock forces generated in elements of modern dance.

PURPOSE: The aim of the study was to assess the possible use of biofeedback (information on the course and values of ground reaction forces (GRF) during landing following the performance of a dance evolution) for training minimising impact loads after a jump in modern dance. METHODS: The tests involved the analysis of a total of 60 expressive elements of modern dance performed by 5 soloists. The tests involved the recording of the vertical component of GRF (GRFz) vector using Kistler platform in the landing phase following the performance of modern dance jumps. The dancers performed the above-named jumps three times in successive tests: a reference test (without biofeedback) and the next two tests with biofeedback, after the obtainment of information about the vertical value of GRF. After each performance, the dancers watched a course of GRF and films showing the recorded landing phase. RESULTS: Applying of a proposed didactic laboratory session led to: extension of contact time and of time preceding the obtainment of the maximum value of GRFz, reduction of the maximum values of the vertical components of the GRF, reduction of the loading rate of the ground reaction force, increase of an impulse of the vertical component of GRF in the entire stance phase and in the shock absorption phase. CONCLUSIONS: Proposed didactic laboratory session with biofeedback may result in the change of the post-jump shock absorption technique.

In Pursuit of the Perfect Dancer's Ballet Foot. The Footprint, Stabilometric, Pedobarographic Parameters of Professional Ballet Dancers.

This work aims to assess footprint parameters in a group of professional ballet dancers and to determine the correlation between the aforementioned parameters and lateralization, stabilometric parameters, pedobarographic parameters and work environment conditions. A group subjected to tests consisted of 44 elite professional ballet dancers and the reference group was composed of 44 students. The test of balance and thrust under feet involved 30 s-long free standing with open eyes on a podographic platform. The research-related analysis was concerned with footprint parameters (foot length and width, Clarke angle, and Weissflog index), stabilometric parameters (path length and ellipse field, mean value of the velocity and deflection of the displacement of the center of the foot pressure on the ground) and pedobarographic parameters (percentage thrust on the right, left foot as well as the front and rear part the foot). Statistically significant differences between the groups were observed in relation to the stabilometric parameters, the percentage pressure of the left forefoot and the right heel, as well as the value of the Clarke angle (p ≤ 0.05). The longitudinal arch of the foot and the width of the foot in ballet dancers are not dependent on the total and professional career duration and weekly training volume.

Evaluation of the effect of muscle forces implementation on the behavior of a dummy during a head-on collision.

PURPOSE: The aim of this study was to develop a method to implement muscle forces to a numerical model of a dummy and to evaluate the effect of muscle activation on driver behavior during a frontal collision. The authors focused on the forces acting at the knee, hip, and elbow joints. METHODS: The authors carried out torque measurements in joints using the Biodex System 4. Then, the previously developed numerical models were modified by introducing the joint torque values. Moments of force were introduced as a function of the rotation angle. During research, numerical simulations were carried out in three stages: in the first stage, a full vehicle crash was analyzed to determine the change of velocity of the vehicle interior; in the second stage, subsidence of the system was realized; in the third stage, a frontal crash was simulated. The models considered the operation of the sensors, airbag and seat belt tensioning system. RESULTS: A numerical model with the active response of the dummy to the change in position during impact was developed. The results of the dynamic analysis were used to analyze the impact of muscle activation on dummy behavior. The change in shoulders rotation angle, the lateral and vertical displacement of the dummy's center of gravity, and the forces acting between the dummy and the seat belt were compared. CONCLUSIONS: The effect of muscle action on the behavior of a dummy during a frontal collision was determined.

Effectiveness of the power and speed dry-land training in female swimmers aged 15-16.

PURPOSE: This work aimed to define the impact of the introduction of power and speed dry-land training in female swimmers aged 15-16 on the rise of time results at a distance of 200 m and on the increase of the strength level of the muscle groups in the elbow joint. METHOD: The investigations were conducted on a group of 28 junior female swimmers: group 1 (aged 13-14) with speed and endurance training based on "water" exercises; group 2 (aged 15-16) with extra power and speed dry-land training. The following parameters were analyzed: time results, the moments of muscle forces in the elbow joint at the extension and flexion movements in isokinetic conditions and the ratio of the values of moments of muscle forces of flexors in relation to extensors. RESULTS: Statistically significant differences between groups were found for the following parameters: the time results from swimming 200 m with ( p < 0.001) and without using lower limbs ( p = 0.031), the ratio of the moments of muscle forces of flexors to extensors ( p < 0.05). CONCLUSIONS: The results of the correlation analysis show that the higher the moments of muscle forces of flexors and extensors of the elbow joint, the shorter the time obtained in swimming 200 m in the freestyle stroke.

Classic and indicative methods in the analysis of the foot arch and foot loads in professional folklore dancers on the basis of stabilographic tests.

PURPOSE: The proper shape of the foot determines its proper functioning and efficiency, which is significant as far as dancers are concerned. The aim of the study was to identify the arch of feet based on the Arch Index (AI), ability to maintain balance on the basis of stabilometric parameters and the distribution of loads acting on the feet of professional folk dancers. METHODS: The study group was composed of 37 folk dancers and the reference group consisted of 56 healthy adults aged 19-45. Balance measurements were performed using the Zebris FDM-S measurement platform, Romberg test with eyes open. Test results were exported to the Matlab 2019b computing environment. The algorithm developed by the Authors in relation was used to calculate Arch Index for the right and left foot, for each test participant separately. RESULTS: Statistical tests did not reveal statistically relevant differences between stabilometric parameters and loads affecting feet in the reference group and that of the dancers. The statistical tests revealed that the value of the AI differed significantly in the reference group and in the group of professional folk dancers ( p = 0.05). The differences were also observed in the group of females ( p = 0.003). No statistically relevant differences were observed in relation to the group of males ( p = 0.116). The percentage of the feet with high arch in the group of dancers amounted to 26%; 33% of dancers' feet were classified as the feet with low arch. CONCLUSIONS: The feet of professional folk dancers have a statistically more arched foot than the reference group.

The Use of Frequency Analysis as a Complementary and Explanatory Element for Time Domain Analysis in Measurements of the Ability to Maintain Balance.

Assessment of human balance is one of the most common diagnostic tests, both in medical applications and during sports training. Many new methods of measuring are introduced in these studies; however, the analysis of results is still carried out mainly based on the values determined in the time domain - the average COP speed or the ellipse field of the prediction. The aim of the current work is to present the possibilities for the practical application of frequency analyses in assessment of the ability to maintain body balance as a method supplementing standard analyses. As part of the study, measurements of the ability to maintain balance in sensory conflict conditions introduced in the form of an oscillating, three-dimensional, virtual scenery were carried out. 27 healthy volunteers (13 women and 14 men) took part in the study. The three-dimensional scenery, presented by means of the Oculus system, oscillated in the sagittal plane with frequencies equal to 0.7 Hz and 1.4 Hz. The frequency value during the measurement was constant or changed in the middle of the test. Measurements were conducted on the FDM Zebris platform. The results were analyzed using developed coefficients determined on the basis of the Short-time Fourier transform (STFT). The use of frequency-domain analyses confirmed that in the COP movement, one can observe a cyclical component corresponding to following the scenery, as well as the appearance of other cyclical components whose observation is important in terms of assessing the ability to maintain balance. It has been shown that the changes in the average COP speed that occur during the measurement can result from changes related to the movement of following the scenery as well as additional body movements indicating a greater or lesser loss of balance. It has been shown that there are differences in the COP movement provoked by the movement of the surrounding scenery, which depend on the parameters of the introduced disturbances - something that can only be observed in results obtained in the frequency domain. The conducted research shows that in measurements involving the ability to maintain one's balance conducted in sensory conflict conditions, standard time-domain analyses should be supplemented with other types of data analysis, e.g. frequency domain analyses.

Biomechanical Effects of Flamenco Footwork.

Footwork is one of the basic features of flamenco dancing and is performed in traditional high-heeled shoes. The purpose of this study was to analyse the mechanical profile of flamenco dancing in terms of vertical ground reaction force, and knee joint kinematics of the supporting limb in footwork technique in order to understand causes which predispose injuries derived from the practice of flamenco dancing. The participant in our study was a professional female flamenco dancer (34 years, 58 kg, 1.65 m) who performed the ZAP 3 test, a sequence of single strikes of the feet performed continuously for 15 s. 3D lower extremity kinematic data were collected using a five-camera motion analysis system (Vicon; Oxford Metrics Ltd., Oxford, UK). Ground reaction forces were recorded using a Kistler force plate. Our analysis was based on 30 cycles of each lower limb consisting of 177 footwork steps. The vertical component of the ground reaction force did not reveal any significant differences between the left and the right limb. The most dynamic strike was provided by the heel (twice the participant's body weight). The mean angular displacement of the supporting limb's knee was ~27°. Results reveal that these impacts could make the knee joint more prone to injuries.

Biomechanical Description of Zapateado Technique in Flamenco.

The main purpose of this study was to identify a dancer's body alignment while performing flamenco footwork to provide a detailed description that could be used by flamenco practitioners: teachers, instructors and students of different levels of advancement. The zapateado technique performed by a professional flamenco dancer was analyzed. The biomechanical analysis was based on 30 cycles composed of six repeating sequences of strikes. Kinematic recordings were performed using a Vicon system, while the measurement of the ground reaction forces (GRF) was accomplished with a Kistler force plate. The following parameters were analyzed: the time of each foot strike, the maximal value of the vertical component of GRF normalized to body weight (BW) for subsequent footwork steps, the impulse of the GRF and the kinematics of pelvis and lower limb joints, and an exemplary waveform view of the sound of footwork strikes was shown. The average values of the vertical component of GRF ranged between 0.6 and 2.7 BW. The maximal anterior pelvic tilt was 29°, with a 6° range of motion (RoM). This mobility was accompanied by 20° hip RoM and by ~40° knee RoM throughout flexion. The conclusions provide practical information that a teacher and flamenco student should receive.

Temporal and spatial variability of the fidgety movement descriptors and their relation to head position in automized general movement assessment.

PURPOSE: In clinical practice, motor development in infants is assessed subjectively. Many researchers propose objective methods, which have numerous limitations, by attaching markers or sensors to the child's limbs. The purpose of this study is to attempt to develop objectified numerical indices to describe the limb movements of infants without interfering with spontaneous activity. METHODS: 20-minute video recordings of three infants' movements who were purposively selected from 51 subjects were included in the study. The procedure of automatic calculation of head position time in 3 positions was applied. Movement features were determined to allow for the delineation of coefficients describing the movement in numerical values. RESULTS: Presented parameters describe three infant's movement aspects: quality (strength), distribution of postural tonus and asymmetry in relation to head position, described as four independent values. Estimated parameters variability over time was weighted up according to expert observations. The presented method is a direct reflection of infants' observation, currently performed by highly educated and experienced therapists. CONCLUSIONS: The interpretability and usefulness of the presented parameters were proved. All parameters estimation is fully automated. The conducted research is a prelude to future work related to creating an objective and repeatable tool, initially monitoring and ultimately supporting early diagnosis for differentiating normal and abnormal motor development.