RESUMEN
MXenes, a large family of two-dimensional (2D) transition-metal carbides/nitrides, have attracted increased attention in recent years because of their excellent electronic, mechanical, thermal, and optical properties. Studying chemical properties of MXenes is important to prolong the shelf life of their colloids and provide robust performance of MXenes in devices and applications. While the role of MXene reactivity with the environment, including water and components of air, is becoming more recognized, less is known about the role of parameters influencing the reactivity. In this work, we investigate the individual and combined effects of the pH and antioxidant on chemical stability of Ti2CTx, Ti3CNTx, and Ti3C2Tx MXenes using GC, XPS, UV-vis, and Raman spectroscopy. In contrast to indirect indicators of MXene degradation, such as film conductivity or performance in electrochemical energy storage systems, we focus on detection of reaction products as the most sensitive and direct way of monitoring the chemical transformations of MXenes. Based on our knowledge of MXene chemistry and interactions with the environment, we propose a combination of sodium hydroxide and sodium l-ascorbate to effectively slow down degradation of MXenes in colloidal solutions by suppressing their hydrolysis and oxidation reactions, respectively.
RESUMEN
High electrical conductivity and strong absorption of electromagnetic radiation in the terahertz (THz) frequency range by metallic 2D MXene Ti3C2Ty make it a promising material for electromagnetic interference shielding, THz detectors, and transparent conducting electrodes. Here, we demonstrate that ultrafast optical pulses with wavelengths straddling the visible range (400 and 800 nm) induce transient broad-band THz transparency in the MXene that persists for nanoseconds. We demonstrate that optically induced transient THz transparency is independent of temperature from 95 to 290 K. This discovery opens new possibilities for development of switchable electromagnetic interference shielding materials and devices that can be rendered partially transparent on demand for transmitting THz signals, or for designing new THz devices such as sensitive optically gated detectors.
RESUMEN
Development of efficient and cost-effective mass-production techniques for size reduction of high- pressure, high-temperature (HPHT) diamonds with sizes from tens to hundreds of micrometers remains one of the primary goals towards commercial production of fluorescent submicron and nanodiamond (fND). fNDs offer great advantages for many applications, especially in labelling, tracing, and biomedical imaging, owing to their brightness, exceptional photostability, mechanical robustness and intrinsic biocompatibility. This study proposes a novel processing method utilizing explosive fragmentation that can potentially be used for the fabrication of submicron to nanoscale size fluorescent diamond particles. In the proposed method, synthetic HPHT 20 pm and 150 pm microcystalline diamond particles containing color centers are rapidly fragmented in conditions of high explosive detonation. X-ray diffraction and Raman spectroscopy show that the detonation fragmented diamond particles consist of good quality submicron diamonds of ~420-800 nm in size, while fluorescence spectroscopy shows photoluminescence spectra with noticeable changes for large (150 µm) starting microcrystalline diamond particles, and no significant changes in photoluminescence properties for smaller (20 µm) starting microcrystalline diamond particles. The proposed detonation method shows potential as an efficient, cost effective, and industrially scalable alternative to milling for the fragmentation of fluorescent diamond microcrystals into submicron- to nano-size domain.
RESUMEN
Although oxidation was deemed as the main factor responsible for the instability of MXenes in aqueous colloids, here we put forward and test a hypothesis about the central role of water as the primary factor. We show that water and related processes of MXene hydrolysis play the main role in the phenomena leading to complete transformations of 2D titanium carbide MXenes into titania in aqueous environments. To demonstrate the role of water, the stability of two MXenes, Ti3C2T x and Ti2CT x, has been systematically studied in aqueous and nonaqueous colloids exposed to oxygen and inert gas atmospheres. The calculated time constant for degradation of Ti3C2T x dispersed in anhydrous iso-propanol saturated with pure oxygen exceeds 5 years, in striking contrast to the same MXene dispersed in water, where more than a half of it would transform into titania even in an oxygen-less atmosphere over â¼41 days. A thinner Ti2CT x MXene showed similar behavior, albeit with shorter time constants in both solvents, correspondingly. UV-vis and Raman spectroscopy were used to analyze the oxidation kinetics and composition of fresh and aged MXenes. An intense anatase peak was observed in MXenes stored in aqueous solutions under Ar atmosphere, while no signs of oxidation could be found in iso-propanol solutions of the MXenes stored under O2 atmosphere over a similar period of time.
RESUMEN
Tiopronin is an FDA-approved thiol drug currently used to treat cystinuria and rheumatoid arthritis. However, due to its antioxidant properties, it may be beneficial in a variety of other conditions. One primary obstacle to its wider application is its limited bioavailability, which necessitates administration of high systemic doses to achieve localized therapeutic effects. Incorporation of a drug delivery vehicle can solve this dilemma by providing a means of controlled, targeted release. Functionalized nanodiamond is a promising theranostic platform that has demonstrated great potential for biomedical applications, including drug delivery. Design of nanodiamond theranostic platforms requires comprehensive understanding of drug-platform interactions, and the necessary physical chemical investigations have only been realized for a limited number of compounds. Towards the long-term goal of developing a nanodiamond-tiopronin treatment paradigm, this study aims to shed light on the effects of nanodiamond surface chemistry on adsorption and release of tiopronin. Specifically, adsorption isotherms were measured and fit to Langmuir and Freundlich models for carboxylated, hydroxylated, and aminated nanodiamonds, and release was monitored in solutions at pH 4.0, 5.8, 7.3, and 8.1. Our results indicate that aminated nanodiamonds exhibit the highest loading capacity while hydroxylated nanodiamonds are the most effective for sustained release. Therefore, a high degree of flexibility may be afforded by the use of nanodiamonds with different surface chemistries optimized for specific applications.
RESUMEN
The interest in nanodiamond applications in biology and medicine is on the rise over recent years. This is due to the unique combination of properties that nanodiamond provides. Small size (â¼5 nm), low cost, scalable production, negligible toxicity, chemical inertness of diamond core and rich chemistry of nanodiamond surface, as well as bright and robust fluorescence resistant to photobleaching are the distinct parameters that render nanodiamond superior to any other nanomaterial when it comes to biomedical applications. The most exciting recent results have been related to the use of nanodiamonds for drug delivery and diagnostics-two components of a quickly growing area of biomedical research dubbed theranostics. However, nanodiamond offers much more in addition: it can be used to produce biodegradable bone surgery devices, tissue engineering scaffolds, kill drug resistant microbes, help us to fight viruses, and deliver genetic material into cell nucleus. All these exciting opportunities require an in-depth understanding of nanodiamond. This review covers the recent progress as well as general trends in biomedical applications of nanodiamond, and underlines the importance of purification, characterization, and rational modification of this nanomaterial when designing nanodiamond based theranostic platforms.
Asunto(s)
Sistemas de Liberación de Medicamentos/métodos , Nanodiamantes , Nanomedicina Teranóstica/métodos , Ingeniería de Tejidos/métodos , Animales , Humanos , Nanodiamantes/química , Nanodiamantes/uso terapéuticoRESUMEN
Nanodiamonds (NDs) have received considerable attention as potential drug delivery vehicles. NDs are small (â¼5 nm diameter), can be surface modified in a controllable fashion with a variety of functional groups, and have little observed toxicity in vitro and in vivo. However, most biomedical applications of NDs utilize surface adsorption of biomolecules, as opposed to covalent attachment. Covalent modification provides reliable and reproducible ND-biomolecule ratios, and alleviates concerns over biomolecule desorption prior to delivery. The present study has outlined methods for the efficient solid-phase conjugation of ND to peptides and characterization of ND-peptide conjugates. Utilizing collagen-derived peptides, the ND was found to support or even enhance the cell adhesion and viability activities of the conjugated sequence. Thus, NDs can be incorporated into peptides and proteins in a selective manner, where the presence of the ND could potentially enhance the in vivo activities of the biomolecule it is attached to.
Asunto(s)
Colágeno , Nanodiamantes/química , Péptidos , Animales , Células CHO , Adhesión Celular/efectos de los fármacos , Colágeno/química , Colágeno/farmacología , Cricetinae , Cricetulus , Péptidos/síntesis química , Péptidos/química , Péptidos/farmacología , Estructura Secundaria de ProteínaRESUMEN
Two-dimensional materials beyond graphene are attracting much attention. Recently discovered 2D carbides and nitrides (MXenes) have shown very attractive electrical and electrochemical properties, but their mechanical properties have not been characterized yet. There are neither experimental measurements reported in the literature nor predictions of strength or fracture modes for single-layer MXenes. The mechanical properties of two-dimensional titanium carbides were investigated in this study using classical molecular dynamics. Young's modulus was calculated from the linear part of strain-stress curves obtained under tensile deformation of the samples. Strain-rate effects were observed for all Tin+1Cn samples. From the radial distribution function, it is found that the structure of the simulated samples is preserved during the deformation process. Calculated values of the elastic constants are in good agreement with published DFT data.
RESUMEN
A combination of density functional theory (DFT) calculations and experiments is used to shed light on the relation between surface structure and Li-ion storage capacities of the following functionalized two-dimensional (2D) transition-metal carbides or MXenes: Sc2C, Ti2C, Ti3C2, V2C, Cr2C, and Nb2C. The Li-ion storage capacities are found to strongly depend on the nature of the surface functional groups, with O groups exhibiting the highest theoretical Li-ion storage capacities. MXene surfaces can be initially covered with OH groups, removable by high-temperature treatment or by reactions in the first lithiation cycle. This was verified by annealing f-Nb2C and f-Ti3C2 at 673 and 773 K in vacuum for 40 h and in situ X-ray adsorption spectroscopy (XAS) and Li capacity measurements for the first lithiation/delithiation cycle of f-Ti3C2. The high-temperature removal of water and OH was confirmed using X-ray diffraction and inelastic neutron scattering. The voltage profile and X-ray adsorption near edge structure of f-Ti3C2 revealed surface reactions in the first lithiation cycle. Moreover, lithiated oxygen terminated MXenes surfaces are able to adsorb additional Li beyond a monolayer, providing a mechanism to substantially increase capacity, as observed mainly in delaminated MXenes and confirmed by DFT calculations and XAS. The calculated Li diffusion barriers are low, indicative of the measured high-rate performance. We predict the not yet synthesized Cr2C to possess high Li capacity due to the low activation energy of water formation at high temperature, while the not yet synthesized Sc2C is predicted to potentially display low Li capacity due to higher reaction barriers for OH removal.
RESUMEN
Nanodiamond particles produced by detonation synthesis and having â¼5 nm diameter possess unique properties, including low cell toxicity, biocompatibility, stable structure, and highly tailorable surface chemistry, which render them an attractive material for developing drug delivery systems. Although the potential for nanodiamonds in delivery and sustained release of anticancer drugs has been recently demonstrated, very little is known about the details of adsorption/desorption equilibria of these and other drugs on/from nanodiamonds with different purity, surface chemistry, and agglomeration state. Since adsorption is the basic mechanism most commonly used for the loading of drugs onto nanodiamond, the fundamental studies into the details of adsorption and desorption on nanodiamond are critically important for the rational design of the nanodiamond drug delivery systems capable of targeted delivery and triggered release, while minimizing potential leaks of dangerous drugs. In this paper we report on a physical-chemical study of the adsorption of doxorubicin and polymyxin B on nanodiamonds, analyzing the role of purification and surface chemistry of the adsorbent.
Asunto(s)
Sistemas de Liberación de Medicamentos/métodos , Nanodiamantes/química , Adsorción , Antibacterianos/química , Doxorrubicina/química , Humanos , Polimixina B/químicaRESUMEN
The large and rapidly growing family of 2D early transition metal carbides, nitrides, and carbonitrides (MXenes) raises significant interest in the materials science and chemistry of materials communities. Discovered a little more than a decade ago, MXenes have already demonstrated outstanding potential in various applications ranging from energy storage to biology and medicine. The past two years have witnessed increased experimental and theoretical efforts toward studying MXenes' mechanical and tribological properties when used as lubricant additives, reinforcement phases in composites, or solid lubricant coatings. Although research on the understanding of the friction and wear performance of MXenes under dry and lubricated conditions is still in its early stages, it has experienced rapid growth due to the excellent mechanical properties and chemical reactivities offered by MXenes that make them adaptable to being combined with other materials, thus boosting their tribological performance. In this perspective, the most promising results in the area of MXene tribology are summarized, future important problems to be pursued further are outlined, and methodological recommendations that could be useful for experts as well as newcomers to MXenes research, in particular, to the emerging area of MXene tribology, are provided.
RESUMEN
Solution-based processing offers advantages for producing thin films due to scalability, low cost, simplicity, and benignity to the environment. Here, we develop conductive and photoactivated self-cleaning reduced graphene oxide (rGO)/Ti3CNTx MXene thin films via spin coating under ambient conditions. The addition of a thin rGO layer on top of Ti3CNTx resulted in up to 45-fold improvement in the environmental stability of the film compared to the bare Ti3CNTx film. The optimized rGO/Ti3CNTx thin film exhibits an optical transmittance of 74% in the visible region of the spectrum and a sheet resistance of 19 kΩ/sq. The rGO/Ti3CNTx films show high rhodamine B discoloration activity upon light irradiation. Under UV irradiation, the electrically conductive MXene in combination with in situ formed semiconducting titanium oxide induces photogenerated charge carriers, which could potentially be used in photocatalysis. On the other hand, due to film transparency, white light irradiation can bleach the adsorbed dye via photolysis. This study opens the door for using MXene thin films as multifunctional coatings with conductive and potentially self-cleaning properties.
RESUMEN
Nanodiamonds are at the heart of a plethora of emerging applications in areas ranging from nanocomposites and tribology to nanomedicine and quantum sensing. The development of alternative synthesis methods, a better understanding, and the availability of ultrasmall nanodiamonds of less than 3 nm size with a precisely engineered composition, including the particle surface and atomic defects in the diamond crystal lattice, would mark a leap forward for many existing and future applications. Yet today, we are unable to accurately control nanodiamond composition at the atomic scale, nor can we reliably create and isolate particles in this size range. In this perspective, we discuss recent advances, challenges, and opportunities in the synthesis, characterization, and application of ultrasmall nanodiamonds. We particularly focus on the advantages of bottom-up synthesis of these particles and critically assess the physicochemical properties of ultrasmall nanodiamonds, which significantly differ from those of larger particles and bulk diamond.
Asunto(s)
Nanodiamantes , Nanodiamantes/química , Nanomedicina , Diamante/químicaRESUMEN
MXenes, a large family of two-dimensional (2D) early transition metal carbides and nitrides, have excellent electrical and electrochemical properties, which can also be explored in assemblies with other 2D materials, like graphene and transition metal dichalcogenides (TMDs), creating heterostructures with unique properties. Understanding the interaction mechanism between 2D materials is critical for the design and manipulation of these 2D heterostructures. Our previous work investigated the interaction between SiO2 and two MXenes (Ti3C2Tx and Ti2CTx). However, no experimental research has been done on MXene interlayer interactions and interactions in MXene heterostructures. Here, we used atomic force microscopy (AFM) with SiO2 tip and Ti3C2Tx and Ti2CTx MXene-coated tips, respectively, to measure the adhesion energies of graphene, MoSe2, Ti3C2Tx, and Ti2CTx MXene with other 2D materials. The measured adhesion energies show that only the interfaces involving graphene demonstrate dependence on the number of material monolayers in a stack. Comparing 40 interacting pairs of 2D materials, the lowest adhesion energy (â¼0.27 J/m2) was found for the interfaces involving MoSe2 and the highest adhesion energy was observed for the interfaces involving Ti3C2Tx (â¼1.23 J/m2). The obtained set of experimental data for 2D interfaces involving MXenes provides a basis for a future in-depth understanding of adhesive mechanisms at interfaces between 2D materials, which is an important topic for the design of 2D heterostructures with controlled interfacial strength and properties.
RESUMEN
MXenes, a large family of two-dimensional materials that are intensely investigated for a broad range of applications, are unstable in water, spontaneously forming TiO2. Several hypotheses have been proposed recently to explain the transformations of MXenes in aqueous environments based on characterization of solid products and measurements of solution pH. However, no studies of the gaseous products of these reactions have been reported. In this work, we demonstrate the use of Raman spectroscopy and gas chromatography techniques to study the gaseous reaction products of Ti2C, Ti3C2, Ti3CN, and Nb2C MXenes in aqueous environments. Based on the analysis of gases, the reactivities of MXenes with different monolayer thickness and chemical composition have been analyzed. We demonstrate the analysis of gases produced during MXene transformations as a powerful technique that can be used for better understanding of their nontrivial chemistry.
RESUMEN
Hydrophobic blue fluorescent nanodiamond was synthesized by covalent linking of octadecylamine to the surface of nanodiamond particles. The material is easily dispersible in hydrophobic solvents, forming a transparent colloidal solution, and can be used in those applications where stable dispersions of nanodiamond in fuels, polymers or oils are required. Bright blue fluorescence of the octadecylamine-modified nanodiamond opens up new avenues for its use as a non-toxic quantum dot analogue for biomedical imaging of cellular membranes and other hydrophobic components of biological systems. Similar surface modification can be used for other carbon nanoparticles.
Asunto(s)
Aminas/química , Diamante/química , Colorantes Fluorescentes/síntesis química , Nanopartículas/química , Aminas/síntesis química , Colorantes Fluorescentes/química , Interacciones Hidrofóbicas e Hidrofílicas , Espectrofotometría Ultravioleta , Espectroscopía Infrarroja por Transformada de Fourier , Propiedades de SuperficieRESUMEN
PURPOSE: The aim of this study is to develop a new process for manufacturing a nano-sized form of the popular cholesterol-reducing drug fenofibrate which can be implemented on industrial scale with minimal changes of currently used production schemes. METHODS: Salt-assisted milling was used to reduce particle size of commercial fenofibrate from micron-sized particles to nanometer domains. RESULTS: The optimal parameters for the salt milling are reported, allowing one to reduce the particle size from tens of micrometers to a hundred of nanometers. Dissolution of nano-sized fenofibrate was studied in various formulations and compared against the micron-sized commercially available fenofibrate. CONCLUSIONS: The nano-sized fenofibrate demonstrates faster dissolution kinetics in aqueous media, simulating stomach environment, within the first 60 min as compared to the micronized form. The highest dissolution rate is achieved with the nano-sized fenofibrate when surfactants, such as sodium dodecyl sulfate or inclusion complex forming agents such as alpha-cyclodextrin, are used.
Asunto(s)
Composición de Medicamentos/métodos , Fenofibrato/química , Hipolipemiantes/química , Tamaño de la Partícula , Composición de Medicamentos/instrumentación , Sales (Química)/química , Solubilidad , Factores de TiempoRESUMEN
Two-dimensional transition metal carbides (MXenes) have attracted a great interest of the research community as a relatively recently discovered large class of materials with unique electronic and optical properties. Understanding of adhesion between MXenes and various substrates is critically important for MXene device fabrication and performance. We report results of direct atomic force microscopy (AFM) measurements of adhesion of two MXenes (Ti3C2Tx and Ti2CTx) with a SiO2 coated Si spherical tip. The Maugis-Dugdale theory was applied to convert the AFM measured adhesion force to adhesion energy, while taking into account surface roughness. The obtained adhesion energies were compared with those for mono-, bi-, and tri-layer graphene, as well as SiO2 substrates. The average adhesion energies for the MXenes are 0.90 ± 0.03 J m-2 and 0.40 ± 0.02 J m-2 for thicker Ti3C2Tx and thinner Ti2CTx, respectively, which is of the same order of magnitude as that between graphene and silica tip.
RESUMEN
A large family of two-dimensional transition metal carbides and nitrides (MXenes) has increasingly raised interest for electronic and optoelectronic applications due to their high electrical conductivity, potentially tunable electronic structure, nonlinear optical properties, and ability to be manufactured in the thin film state. During delamination and storage in ambient air environment, spontaneous oxidation of MXene flakes leads to formation of titanium oxide, a process that, as we demonstrate here, can be harnessed for manufacturing MXene-titania composites for optoelectronics, sensing, and other applications. We show that partially oxidized MXene thin films containing the in situ formed phase of titanium oxide have a significant photoresponse in the UV region of the spectrum. The relaxation process of photoexcited charge carriers takes a long time (â¼24 h) but can be accelerated in the presence of oxygen and water vapor in the atmosphere. These properties of spontaneously formed MXene-titania thin films make them attractive materials for photoresistors with memory effect and sensitivity to the environment, as well as many other photo- and environment-sensing applications.
RESUMEN
There is a range of medical conditions, which include acute organ failure, bacterial and viral infection, and sepsis, that result in overactivation of the inflammatory response of the organism and release of proinflammatory cytokines into the bloodstream. Fast removal of these cytokines from blood circulation could offer a potentially efficient treatment of such conditions. This study aims at the development and assessment of novel biocompatible graphene-based adsorbents for blood purification from proinflammatory cytokines. These graphene-based materials were chosen on the basis of their surface accessibility for small molecules further facilitated by the interlayer porosity, which is comparable to the size of the cytokine molecules to be adsorbed. Our preliminary results show that graphene nanoplatelets (GnP) exhibit high adsorption capacity, but they cannot be used in direct contact with blood due to the risk of small carbon particle release into the bloodstream. Granulation of GnP using poly(tetrafluoroethylene) as a binder eliminated an undesirable nanoparticle release without affecting the GnP surface accessibility for the cytokine molecules. The efficiency of proinflammatory cytokine removal was shown using a specially designed flow-through system. So far, GnP proved to be among the fastest acting and most efficient sorbents for cytokine removal identified to date, outperforming porous activated carbons and porous polymers.