RESUMEN
In this study we investigated the chemical and surface wettability changes of poly(dimethylsiloxane) (PDMS) induced by a 2.0 MeV He(+) beam irradiation. The chemical changes created in PDMS were characterized by universal attenuated total reflectance infrared (UATR-FTIR) spectroscopy, while the changes of the wettability were determined by contact angle measurements. In a separate analysis, hydrogen depletion was also investigated with a 1.6 MeV He(+) beam by applying the elastic recoil detection analysis (ERDA) and Rutherford backscattering spectrometry techniques simultaneously. The ERDA results showed that the hydrogen content of PDMS decreased irreversibly, which means that volatile products were formed under radiolysis, such as hydrogen or methane. The results were completed with UATR-FTIR measurements. We propose a complete reaction mechanism for the processes taking place in PDMS. These ion beam induced processes, such as chain scissions, cross-linking, and depletion of small molecular weight fragments, lead to the formation of a silica-like final product (SiO(x)). The significant chemical changes at the surface influence the wettability of PDMS, making it considerably more hydrophilic. The penetration depth of the 2.0 MeV He(+) ions is significantly higher compared to that of other surface modification techniques, which makes the modified layer thick and homogeneous; on the other hand, it is easily controllable by the energy of the incident ions.
RESUMEN
The aim of this study was to examine the accuracy of the computerized 3D surface analyzing and volume measuring method in dentistry. Two different types of test objects were used in the first part of the measurements. Each sample of the two groups was cross-sectioned using a hard tissue microtome. The sections were photographed on both sides and were projected on a graphical tablet and analyzed using a computer program. The measured and calculated parameters were compared. In the second part, 200 microm thick horizontal sections were prepared from 11 human incisor roots using the hard tissue microtome. This way, five sections were prepared from the apical 2 mm of each root. The effects of section thickness and number were modeled by decreasing the inclusion rate of the obtained number of sections from 10 to 2 and its influence on the calculated results was determined. This method was suitable for the approximation and analysis of 3D parameters. The results indicated that using 200-300 microm section thickness, the measured values were approximately 8-21% lower than the real parameters.