Immobilization of the ß-galactosidase enzyme by encapsulation in polymeric matrices for application in the dairy industry.

Lactose intolerance affects approximately 65% of the global adult population, leading to the demand for lactose-free products. The enzyme ß-galactosidase (ßG) is commonly used in the industry to produce such products, but its recovery after lactose hydrolysis is challenging. In this scenario, the study aims to encapsulate ßG within capsules, varying in dimensions and wall materials, to ensure their suitability for efficient industrial recovery. The enzyme ßG was encapsulated through ionic gelation using alginate and its blends with pectin, maltodextrin, starch, or whey protein as wall materials. The capsules produced underwent evaluation for encapsulation efficiency, release profiles, activity of the ßG enzyme, and the decline in enzyme activity when reused over multiple cycles. Alginate at 5% wt/vol concentrations, alone or combined with polymers such as maltodextrin, starch, or whey protein, achieved encapsulation efficiencies of approximately 98%, 98%, 80%, and 88%, respectively. The corresponding enzyme recovery rates were 34%, 19%, 31%, and 48%. Capsules made with an alginate-pectin blend exhibited no significant hydrolysis and maintained an encapsulation efficiency of 79%. Encapsulation with alginate alone demonstrated on poor retention of enzyme activity, showing a loss of 74% after just 4 cycles of reuse. Conversely, when alginate was mixed with starch or whey protein concentrate, the loss of enzyme activity was less than 40% after 4 reuses. These results highlight the benefits of combining encapsulation materials to improve enzyme recovery and reuse, offering potential economic advantages for the dairy industry.

Microwave and ultrasound extraction of antioxidant phenolic compounds from Lantana camara Linn. leaves: Optimization, comparative study, and FT-Orbitrap MS analysis.

INTRODUCTION: The species Lantana camara is used in folk medicine. The biological activities of this medicinal plant are attributable to the presence of various derivatives of triterpenoids and phenolic compounds present in its preparations, indicating excellent economic potential. OBJECTIVE: In this study, the operational conditions of ultrasound-assisted extraction (UAE) and microwave-assisted extraction (MAE) were optimized using Box-Behnken design to improve the total phenolic content (TPC) recovered in hydroethanolic extracts of L. camara leaves. MATERIAL AND METHODS: The TPC, total flavonoid content (TFC), and antioxidant activities of the hydroalcoholic extracts of L. camara, prepared by UAE and MAE under the optimized extraction conditions, were compared with those of the extracts obtained by conventional extraction methods. RESULTS: Under the optimal conditions, the extracts obtained by UAE (35% ethanol, 25 min, and a solvent-to-solid ratio of 60:1 mL/g) and by MAE (53% ethanol, 15 min, and 300 W) provided high yields of 32.50% and 38.61% and TPC values of 102.89 and 109.83 mg GAE/g DW, respectively. The MAE extract showed the best results with respect to TPC, TFC, and antioxidant activities, followed by extracts obtained by UAE, Soxhlet extraction, decoction, maceration, and infusion, in that order. CONCLUSION: The results obtained indicate that L. camara may be used as an important source of antioxidant phenolic compounds to obtain products with high biological and economic potential, especially when the extraction process is performed under appropriate conditions using MAE and/or UAE, employing environmentally friendly solvents such as water and ethanol.

Use of Residual Lignocellulosic Biomass and Algal Biomass to Produce Biofuels.

Efforts are intensifying to identify new biofuel sources in response to the pressing need to mitigate environmental pollutants, such as greenhouse gases, which are key contributors to global warming and various worldwide calamities. Algae and microalgae present themselves as excellent alternatives for solid-gaseous fuel production, given their renewable nature and non-polluting characteristics. However, making biomass production from these organisms economically feasible remains a challenge. This article collates various studies on the use of lignocellulosic waste, transforming it from environmental waste to valuable organic supplements for algae and microalgae cultivation. The focus is on enhancing biomass production and the metabolites derived from these biomasses.

Prevalence of natural infection by Trypanosoma evansi in Crioula LAGEANA cattle.

Cattle trypanosomiasis negatively impacts animal husbandry due to high morbidity, productivity losses, and mortality rates. Knowledge regarding Trypanosoma evansi infections in locally adapted breeds remains limited. Some cattle breeds exhibit trypanotolerance, requiring the determination of prevalence, as well as related tolerance and resistance characteristics, for disease control programs. This study aimed to determine T. evansi prevalence in Crioula Lageana cattle and associate clinical, hematological, and biochemical aspects with the infection to further research on tolerance in this population. Blood samples from 310 Crioula Lageana cattle were tested using Polymerase Chain Reaction (PCR) and Indirect Immunofluorescence Reaction (IIFR). T. evansi prevalence was 8% (24/310) using PCR and 4% (11/310) using IIFR. Positive animals showed increased ruminal movements, elevated eosinophil counts, and reduced monocyte numbers, but both latter within the reference range for the species. Albumin concentrations were low in positive cases and remained below the reference range limit for both groups. However, triglycerides exceeded the physiological range for the species in both positive and negative groups. Increased gamma-glutamyltransferase (GGT) activity was observed in positive animals. In conclusion, Crioula Lageana cattle exhibited enzootic instability with a low T. evansi infection prevalence when assessed using PCR and IIFR techniques. Furthermore, the animals did not display clinical, hematological, or biochemical alterations attributable to the presence of hemoparasites.

Absence of maternal-fetal adverse effects of Alternanthera littoralis P. Beauv. following treatment during pregnancy in mice.

Alternanthera littoralis P. Beauv is a plant native to Brazil that exhibits various beneficial activities including antioxidant, antibacterial, antifungal, antiprotozoal, anti-hyperalgesic, and anti-inflammatory properties. The aim of this study was to assess the impact of the ethanol extract of Alternanthera littoralis (EEAl) on reproductive outcomes, embryofetal development, and DNA integrity of pregnant female mice. Pregnant Swiss female mice were randomly assigned to three experimental groups (n = 10): controls were administered either 1% Tween 80 (vehicle), EEAl 100 mg/kg or EEAl 1000 mg/kg. Treatment was administered through gavage during the gestational period until day 18. On gestational days 16, 17, and 18, a peripheral blood sample from the tail vein was obtained for DNA integrity analysis (micronucleus test). After the last collection, animals were euthanized by cervical dislocation. Maternal organs and fetuses were collected, weighed, and subsequently analyzed. Reproductive outcome parameters were assessed by measurement of number of implants, live fetuses, and resorptions. Embryonic development was determined by adequacy of weight for gestational age as well as determination of external, visceral, and skeletal malformations. Data demonstrated that EEAl did not produce maternal toxicity at either dose associated with no marked alterations in any of the reproductive outcome parameters including implantation sites, live/dead fetuses ratio, fetal viability, post-implantation losses, resorptions, and resorption rate. However, EEAl 1000 group reduced embryofetal development by lowering placental weight. In addition, there was an increase in the frequency of external and skeletal malformations in the EEAl 1000 group, which could not be attributed to extract exposure as these values were within control levels. Based upon our findings, evidence indicates that the EEAl at the concentrations employed in our study may be considered safe for use during pregnancy and extracts of this plant show potential for development of phytomedicines to be used in pregnancy.

Assessment of the measurement methods in midshaft clavicle fracture.

BACKGROUND: Clavicle fractures account for approximately 5% of all fractures in adults and 75% of clavicle fractures occur in the midshaft. Shortening greater than two centimeters is an indicative of surgical treatment. Radiographic exams are often used to diagnose and evaluate clavicle fractures but computed tomography (CT) scan is currently considered the best method to assess these deformities and shortening. GOAL: 1- To investigate whether different methods of performing the radiographic exam interfere on the measurement of the fractured clavicle length. 2- Compare the clavicle length measurements obtained by the different radiographic exam methods with the CT scan measurements, used as a reference. MATERIALS AND METHODS: Twenty-five patients with acute (< 3 weeks) midshaft clavicle fracture were evaluated. Patients underwent six radiographic images: PA Thorax (standing and lying), AP Thorax (standing and lying) and at 10° cephalic tilt (standing and lying), and the computed tomography was used as reference. RESULTS: The mean length (cm) obtained were: 14,930 on CT scan, 14,860 on PA Thorax Standing, 14,955 on PA Thorax Lying, 14,896 on AP Thorax Standing, 14,960 AP Thorax Lying, 15,098 on 10° cephalic tilt Standing and 15,001 on 10° cephalic tilt Lying, (p > 0,05). CONCLUSION: 1- There is no significant statistical difference in the clavicle fracture length measurement among the variety of radiographic exam performances. 2- The method that comes closest to computed tomography results is the PA thorax incidence, with the patient in the lying position.

Cardiac response in tambaqui Colossoma macropomum anaesthetised with Piper divaricatum essential oil.

The aim of this study was to evaluate the electrocardiographic responses of Colossoma macropomum exposed to short-term baths using the essential oil of Piper divaricatum (EOPD) as an anaesthetic-like agent in different doses (40, 60, and 80 µL L-1). Cardiac responses throughout and after exposure to EOPD were monitored and evaluated through mean heart rate (HR), duration and amplitude of the QRS complex (ventricular depolarization), and Q-T (ventricular contraction) and R-R (time between two successive QRS complexes) wave intervals. Across all doses, there was a marked depression of the HR, mainly at 80 µL L-1 EOPD. Mean amplitudes recorded for the QRS complex and Q-T interval at 40 µL L-1 EOPD were indistinguishable from the control, which could reinforce this concentration as sufficient and safe to promote fast anaesthesia without affecting cardiac function. Recovery from bradycardia, duration of the R-R interval, and QRS complex were similar at 60 and 80 µL L-1 EOPD; however, the Q-T interval at 80 µL L-1 EOPD revealed a more pronounced cardiac depression in relation to the controls and fish exposed to 60 µL L-1 EOPD. Thus, we conclude that 40 µL L-1 EOPD should suffice to induce fast, deep, and safe anaesthesia in tambaqui juveniles, whereas the concentration of 80 µL L-1 led to a greater depression of the cardiac function, albeit showing effect reversibility.

Safe Path Planning Algorithms for Mobile Robots Based on Probabilistic Foam.

The planning of safe paths is an important issue for autonomous robot systems. The Probabilistic Foam method (PFM) is a planner that guarantees safe paths bounded by a sequence of structures called bubbles that provides safe regions. This method performs the planning by covering the free configuration space with bubbles, an approach analogous to a breadth-first search. To improve the propagation process and keep the safety, we present three algorithms based on Probabilistic Foam: Goal-biased Probabilistic Foam (GBPF), Radius-biased Probabilistic Foam (RBPF), and Heuristic-guided Probabilistic Foam (HPF); the last two are proposed in this work. The variant GBPF is fast, HPF finds short paths, and RBPF finds high-clearance paths. Some simulations were performed using four different maps to analyze the behavior and performance of the methods. Besides, the safety was analyzed considering the new propagation strategies.

Activated carbon obtained from amazonian biomass tailings (acai seed): Modification, characterization, and use for removal of metal ions from water.

Acai seed was used herein as an Amazon biomass waste for the synthesis of activated and modified carbon in order to find a possible use for the large volume of residues generated during the processing of this fruit and to add value to this residue. Activated carbon materials were used to remove Pb2+, Fe2+, and Mg2+ metal ions from water. The efficiency of removal of these ions by the acai seed activated carbon was compared with that by commercial activated carbon. Activated carbon materials were prepared by carbonization and chemical activation using two KOH impregnation ratios, namely 1:1 (ACK1) and 5:1 (ACK5), by mass. These samples were modified by treatment with nitric acid under microwave heating (ACK1-M) and (ACK5-M), respectively. The result of the elemental analysis indicated that this biomass has carbon and sulfur contents of 43.29% and 0.10% wt, respectively. The textural parameters showed that the obtained activated carbon samples presented high surface areas between 1462 and 2774 m2 g-1. Raman analysis revealed the different degrees of graphitization of the activated carbon materials. Boehm titration identified the presence of phenolic, carboxylic, and lactonic groups in samples that were confirmed by Fourier transform infrared spectroscopy. In the metal adsorption tests, ACK5-M showed better removal efficiency, reaching 86% removal for Pb2+, 69% for Fe2+, and 8% for Mg2+in 1 h of contact time; these results were superior to those obtained for commercial carbon. The results indicated that acai seed can be used for the production of activated carbon and can also be used for metal removal.

Advances in the Biotechnological Potential of Brazilian Marine Microalgae and Cyanobacteria.

Due the worldwide need to improve care for the environment and people, there is a great demand for the development of new renewable, sustainable, and less polluting technologies for food, health, and environmental industries. The marine environment is one of the main areas investigated in the search for alternatives to the raw materials currently used. Thereby, cyanobacteria and marine microalgae are microorganisms that are capable of producing a diverse range of metabolites useful for their cellular maintenance, but that also represent a great biotechnological potential. Due its great potential, they have an enormous appeal in the scientific research where, the biological activity of metabolites produced by these microorganisms, such as the antioxidant action of sterols are, some examples of biotechnological applications investigated around the world. Thereby, Brazil due to its extensive biodiversity, has high potential as a raw material supplier of marine waters, researching cyanobacteria and microalgae metabolites and their applications. Thus, this rapid review intends to present some important contributions and advances from Brazilian researchers, using the biomass of Brazilian cyanobacteria and marine microalgae, in order to illustrate the value of what has already been discovered and the enormous potential of what remains unexplored so far.

Performance Evaluation of Multi-UAV Network Applied to Scanning Rocket Impact Area.

This paper presents a communication network for a squadron of unmanned aerial vehicles (UAVs) to be used in the scanning rocket impact area for Barreira do Inferno Launch Center-CLBI (Rio Grande do Norte, Brazil), aiming at detecting intruder boats. The main features of communication networks associated with multi-UAV systems are presented. This system sends information through Wireless Sensor Networks (WSN). After comparing and analyzing area scanning strategies, it presents the specification of a data communication network architecture for a squadron of UAVs within a sensor network using XBee Pro 900HP S3B modules. A brief description is made about the initial information from the construction of the system. The embedded hardware and the design procedure of a dedicated communication antenna to the XBee modules are presented. In order to evaluate the performance of the proposed architecture in terms of robustness and reliability, a set of experimental tests in different communication scenarios is carried out. Network management software is employed to measure the throughput, packet loss and other performance indicators in the communication links between the different network nodes. Experimental results allow verifying the quality and performance of the network nodes, as well as the reliability of the communication links, assessing signal received quality, range and latency.

Optimization of Light Intensity and NaNO3 Concentration in Amazon Cyanobacteria Cultivation to Produce Biodiesel.

The objective of this study, for the first time, was to optimize Amazonian cyanobacterial culture conditions for improving cell productivity and lipid content, by analyzing the effect of light intensity and nitrogen concentration, for empirically evaluating biodiesel quality parameters. The strains Synechocystis sp. CACIAM05, Microcystis aeruginosa CACIAM08, Pantanalinema rosaneae CACIAM18, and Limnothrix sp. CACIAM25, were previously identified by morphological and molecular analysis (16S rRNA) and were selected based on their production of chlorophyll a and dry cell weight. Then, factorial planning (22) with central points was applied, with light intensity and NaNO3 concentration as independent variables. As response variables, cell productivity and lipid content were determined. Statistical analysis indicated that for all strains, the independent variables were statistically significant for cell productivity. Analysis of the fatty acid composition demonstrated diversity in the composition of the fatty acid profile from the experimental planning assays of each strain. The Biodiesel Analyzer software predicted the biodiesel quality parameters. CACIAM05 and CACIAM25 obtained better parameters with low levels of light intensity and NaNO3 concentration, whereas CACIAM08 and CACIAM18 obtained better parameters with low NaNO3 concentrations and high luminous intensity.

High-Quality Biodiesel Production from Buriti (Mauritia flexuosa) Oil Soapstock.

The buriti palm (Mauritia flexuosa) is a palm tree widely distributed throughout tropical South America. The oil extracted from the fruits of this palm tree is rich in natural antioxidants. The by-products obtained from the buriti palm have social and economic importance as well, hence the interest in adding value to the residue left from refining this oil to obtain biofuel. The process of methyl esters production from the buriti oil soapstock was optimized considering acidulation and esterification. The effect of the molar ratio of sulfuric acid (H2SO4) to soapstock in the range from 0.6 to 1.0 and the reaction time (30⁻90 min) were analyzed. The best conditions for acidulation were molar ratio 0.8 and reaction time of 60 min. Next, the esterification of the fatty acids obtained was performed using methanol and H2SO4 as catalyst. The effects of the molar ratio (9:1⁻27:1), percentage of catalyst (2⁻6%) and reaction time (1⁻14 h) were investigated. The best reaction conditions were: 18:1 molar ratio, 4% catalyst and 14 h reaction time, which resulted in a yield of 92% and a conversion of 99.9%. All the key biodiesel physicochemical characterizations were within the parameters established by the Brazilian standard. The biodiesel obtained presented high ester content (96.6%) and oxidative stability (16.1 h).

Dilute-and-shoot approach combined with in-situ formed metal-containing ionic liquids for extraction of benzophenone and related compounds from açaí-based food products.

For the first time, benzophenone and related compounds were investigated in açaí-based food products. An extraction method based on the dilute-and-shoot approach, combined with the use of in-situ formed metal-containing ionic liquids (MCILs) followed by high-performance liquid chromatography, was developed and validated. A nickel and cobalt-based MCIL, in addition to the ratio of MCIL to lithium bis[(trifluoromethyl)sulfonyl]imide salt ([Li+][NTf2-]) for the ensuing metathesis reaction, were optimized. Parameters of the in-situ formed MCIL step, namely, the amount of MCIL, centrifugation time, and dilution step, were analyzed using a multivariate optimization approach, including central composite rotatable design and Derringer and Suich's tool. Optimum extraction performance was achieved using 50.98 mg of nickel-based MCIL and a MCIL to ([Li+][NTf2-]) ratio of 1:3 (m/m), a centrifuge time of 22 min, and 10.53 mL of water for the dilution step. This condition was used to perform analytical validation, which yielded satisfactory results with R2 ≥ 0.995, limits of detection (LOD) ranging from 0.0025 to 0.5 mg kg-1, and limits of quantification (LOQ) between 0.008 and 1.5 mg kg-1. The recovery rate ranged from 87 % to 107 % and precision values (as percent relative standard deviation) were equal or lower than 13 %. The validated method was applied to 25 samples of açaí-based food products purchased from Brazil and the United States. None of the samples showed analyte concentration levels above the LOD. The method's suitability was demonstrated for future monitoring of complex samples, such as foodstuffs.

A practical and eco-friendly method for the determination of polycyclic aromatic hydrocarbons in açaí-based food products by vacuum-assisted sorbent extraction coupled to gas chromatography-mass spectrometry.

For the first time, a method for the simultaneous analysis of fifteen polycyclic aromatic hydrocarbons (PAHs), including light and heavy PAHs, in açaí-based food products (AFPs) was developed using vacuum-assisted sorbent extraction (VASE) combined with gas chromatography-mass spectrometry (GC-MS). The method requires no organic solvents and is amenable to full automation. To achieve optimal analytical extraction conditions, VASE parameters including stirring rate, extraction time, desorption temperature, desorption time, preheat time, and preheat temperature were optimized using sequential multivariate optimization. The method was validated and yielded limits of quantification below 1 µg kg-1 for all analytes, with recoveries ranging from 65 % to 112 % and good precision (≤11 % relative standard deviation). Additionally, the greenness and practical aspects of the method were investigated using the Green Analytical Procedure Index (GAPI), eco-scale, and the Blue Applicability Grade Index (BAGI), respectively. The VASE-GC-MS approach is suitable for routine analysis and exhibits characteristics of a green analytical method. No PAHs were detected above the limits of detection in thirty samples of AFPs.

Multivariate optimization for extraction of 2-methylimidazole and 4-methylimidazole from açaí-based food products using polymeric ionic liquid-based sorbent coatings in solid-phase microextraction coupled to gas chromatography-mass spectrometry.

In this study, polymeric ionic liquids featuring different functional moieties were applied as sorbent coatings in direct-immersion solid-phase microextraction (DI-SPME) for the extraction of 2-methylimidazole (2-MI) and 4-methylimidazole (4-MI) from açaí-based food products followed by gas chromatography-mass spectrometry (GC-MS) analysis. The analytical method was optimized using a sequential experimental design. Variables used in GC-MS such as desorption time, as well as for SPME-DI, including extraction time, extraction temperature, incubation time of extraction, amount of NaCl in the extract, and stirring rate, were optimized. The fitness-for-purpose of the method was verified by the linearity of matrix-matched calibration curves (R2 ≥ 0.9921), adequate recoveries (81.7-89.7 %), and precision (relative standard deviations ≤11.2 %). The method was applied to twenty-five samples of açaí-based food products. 4-MI was found in four samples whereas 2-MI was not detected above the limit of detection. The method was found to be suitable for quality control analysis.

Correction: Pontes do Nascimento et al. Synthesis of Mesoporous Zn1-xMxAl2O4 Substituted by Co2+ and Ni2+ Ions and Application in the Photodegradation of Rhodamine B. Materials 2020, 13, 2150.

In the original publication [...].

Complications and clinical outcomes with minimally invasive plate osteosynthesis (MIPO) technique for midshaft clavicle fractures: a systematic review and meta-analysis.

Background: Clavicle fractures are among the most common upper limb fractures in adults, with the midshaft region being the most frequently affected site. Minimally invasive plate osteosynthesis (MIPO) has emerged as an alternative to the traditional open reduction and internal fixation (ORIF) technique, offering potential advantages. The purpose of this study was to conduct a systematic review to explore the results of this technique in the existing literature, with emphasis on the occurrence of surgical complications and functional outcomes and also to provide a comprehensive comparison of MIPO and ORIF in the management of midshaft clavicle fractures. Methods: We conducted a systematic review to evaluate the complication incidence and clinical outcomes of MIPO for midshaft clavicle fractures. We searched PubMed/Medical Literature Analysis and Retrieval System Online (MEDLINE), Scopus, the Cochrane Database of Controlled Trials, and the Cochrane Database of Systematic Reviews databases without language or date restrictions. Studies focusing on midshaft clavicle fractures treated with MIPO were included, while other clavicle fractures and nonclinical studies were excluded. The risk of bias was assessed using the Methodological Index for Nonrandomized Studies criteria and the Risk of Bias Tool 2 Cochrane tool. Data synthesis included qualitative analysis, and if applicable, quantitative analysis and meta-analysis. Adherence to Preferred Reporting Items for Systematic Reviews and Meta-analyses guidelines ensured reporting quality. Results: A total of 107 studies were initially identified, after applying inclusion and exclusion criteria, 22 studies were included for data extraction. These studies involved the evaluation of 714 clavicles treated with the MIPO technique. Of the 714 MIPO cases, 11 cases of implant failure, 5 nonunions, 2 infections, and 28 cases with neurological impairment were observed. Quantitative analysis comparing MIPO with ORIF revealed that MIPO had significantly shorter surgery time (mean difference -12.95, 95% confidence interval [-25.27 to -0.63], P = .04) and lower occurrence of numbness (odds ratio 0.29, 95% CI [0.15-0.56], P = .0002) compared to ORIF. Time to bone union, functional outcomes, and other complications were similar between MIPO and ORIF at the final follow-up. An overall moderate risk of bias was found across the studies. Conclusion: The MIPO technique yields good and comparable results to ORIF for midshaft clavicle fractures. Additionally, the MIPO technique may offer advantages such as reduced surgical time and lower chances of neurological impairment.

Establishment and Characterization of a Primary Fibroblast Cell Culture from the Amazonian Manatee (Trichechus inunguis).

The vulnerable status of the Amazon manatee, Trichechus inunguis, indicates the need to seek measures to guarantee its conservation. In this context, the cultivation of cells in vitro is a strategy that should at least guarantee the preservation of their genetic material. Thus, we established for the first time a primary culture of Amazonian manatee fibroblasts (TINsf) from a skin biopsy of a young male. Karyotypic analysis of the 3rd, 7th, and 12th passages confirmed the taxonomic identity of the species T. inunguis (2n = 56/NF = 92) and indicated that this culture presents genomic stability. Gene and protein expression of vimentin at the 13th passage show the predominant presence of fibroblasts in TINsf. To test the cell line's responsiveness to materials and demonstrate a possible application of this culture, it was exposed to andiroba seed oil (ASO), and its viability and proliferative capacity were evaluated. ASO demonstrated toxic effects at the highest concentrations and longest exposure times tested, reproducing results observed in human cultures, indicating the applicability of TINsf in toxicological and biotechnological studies. After cryopreservation, the TINsf line maintained its proliferative potential, indicating the establishment of a new culture available for future studies.

Improving chitosan performance in the simultaneous adsorption of multiple polycyclic aromatic hydrocarbons by oligo(ß-pinene) incorporation.

The occurrence of persistent organic pollutants in aquatic bodies, namely polycyclic aromatic hydrocarbons (PAHs), has been increasingly detected. The presence of such contaminants represents a serious threat to human health due to their toxicity. Therefore, aiming to provide a novel and efficient alternative for PAHs' removal from water, the present study assesses the effect of oligo(ß-pinene) blended with chitosan for the adsorption of these pollutants. Oligo(ß-pinene) with phenyl end-groups was synthesized by organocatalyzed atom transfer radical polymerization (O-ATRP) and incorporated in different concentrations (6, 12, and 18 %) to chitosan films. The oligo(ß-pinene) loading in the chitosan matrix impressively improved this polysaccharide adsorption capacity. The formulation containing 12 % of oligomer demonstrated a contaminant removal performance three times higher (298.82 %) than pure chitosan during only 1 h of the decontamination process. Adsorption isotherms showed an improved uptake of PAHs with the increase of the contaminants' concentration in the aqueous media due to the formation of a higher concentration gradient. Additionally, a comprehensive characterization of oligo(ß-pinene)/chitosan formulation was performed to provide a better understanding of the interactions between the components of the blends. Overall, it was concluded that oligo(ß-pinene)/chitosan blends can be used as a high-performance and sustainable alternative for PAHs removal.