RESUMEN
We demonstrate formation of the ideal split-vacancy configuration of the Sn-vacancy center upon implantation into natural diamond. Using ß^{-} emission channeling following low fluence ^{121}Sn implantation (2×10^{12} atoms/cm^{2}, 60 keV) at the ISOLDE facility at CERN, we directly identified and quantified the atomic configurations of the Sn-related centers. Our data show that the split-vacancy configuration is formed immediately upon implantation with a surprisingly high efficiency of ≈40%. Upon thermal annealing at 920 °C ≈30% of Sn is found in the ideal bond-center position. Photoluminescence revealed the characteristic SnV^{-} line at 621 nm, with an extraordinarily narrow ensemble linewidth (2.3 nm) of near-perfect Lorentzian shape. These findings further establish the SnV^{-} center as a promising candidate for single photon emission applications, since, in addition to exceptional optical properties, it also shows a remarkably simple structural formation mechanism.
RESUMEN
A high-temperature procedure to hydrogenate diamond films using molecular hydrogen at atmospheric pressure was explored. Undoped and doped chemical vapour deposited (CVD) polycrystalline diamond films were treated according to our annealing method using a H2 gas flow down to ~50 ml∕min (STP) at ~850 °C. The films were extensively evaluated by surface wettability, electron affinity, elemental composition, photoconductivity, and redox studies. In addition, electrografting experiments were performed. The surface characteristics as well as the optoelectronic and redox properties of the annealed films were found to be very similar to hydrogen plasma-treated films. Moreover, the presented method is compatible with atmospheric pressure and provides a low-cost solution to hydrogenate CVD diamond, which makes it interesting for industrial applications. The plausible mechanism for the hydrogen termination of CVD diamond films is based on the formation of surface carbon dangling bonds and carbon-carbon unsaturated bonds at the applied tempera-ture, which react with molecular hydrogen to produce a hydrogen-terminated surface.
RESUMEN
The contribution deals with low-temperature phenomena observed in highly boron-doped nanocrystalline diamond films grown by plasma enhanced chemical vapour deposition technique. We put special emphasis on the effects likely related to the granular structure of this material. It has been shown that the experimental data concerning critical currents, supercurrents induced by thermal noise in the normal phase and current-induced Josephson's noise in the superconductivity transition region may be consistently explained by a model of superconducting grains interconnected by a single or a few weak links having a characteristic dimension in the nanometer range.
RESUMEN
Chemical vapour deposited (CVD) diamond is a very promising material for biosensor fabrication owing both to its chemical inertness and the ability to make it electrical semiconducting that allows for connection with integrated circuits. For biosensor construction, a biochemical method to immobilize nucleic acids to a diamond surface has been developed. Nanocrystalline diamond is grown using microwave plasma-enhanced chemical vapour deposition (MPECVD). After hydrogenation of the surface, 10-undecenoic acid, an omega-unsaturated fatty acid, is tethered by 254 nm photochemical attachment. This is followed by 1-ethyl-3-[3-dimethylaminopropyl]carbodiimide (EDC)-mediated attachment of amino (NH(2))-modified dsDNA. The functionality of the covalently bound dsDNA molecules is confirmed by fluorescence measurements, PCR and gel electrophoresis during 35 denaturation and rehybridisation steps. The linking method after the fatty acid attachment can easily be applied to other biomolecules like antibodies and enzymes.
Asunto(s)
Técnicas Biosensibles/instrumentación , ADN , Diamante , Etildimetilaminopropil Carbodiimida , Nanopartículas , ADN/síntesis química , Ácidos Grasos InsaturadosRESUMEN
The linearity of dose response of chemical vapour deposition (CVD) diamonds grown at the Institute for Materials Research at Limburg University, Belgium, was investigated over a dose range relevant for radiotherapy. The following CVD diamonds were investigated: (1) a batch of square 3 x 3 mm2 detectors cut from a CVD wafer and (2) an as-grown CVD wafer of 6 cm diameter. A total of 20 CVD square detectors were irradiated with 137Cs gamma rays over the dose range from 200 mGy to 25 Gy. The CVD wafer, used as a large-area thermoluminescent (TL) detector, was exposed to a 226Ra needle. Very few square detectors showed linearity over a limited dose range, followed by saturation of the TL signal. The dose range of linearity was found to be strongly affected by the thermal annealing procedure of the detector. Owing to its high sensitivity and homogeneity of response, the large CVD diamond wafer was found to be very suitable as a large-area detector for 2-D dose mapping of the 226Ra brachytherapy source, possibly for Quality Assurance purposes.
Asunto(s)
Diamante/química , Diamante/efectos de la radiación , Modelos Químicos , Dosimetría Termoluminiscente/instrumentación , Simulación por Computador , Relación Dosis-Respuesta en la Radiación , Diseño de Equipo , Análisis de Falla de Equipo , Ensayo de Materiales , Dosis de Radiación , Dosimetría Termoluminiscente/métodosRESUMEN
Efficient delivery of stabilized nucleic acids (NAs) into cells and release of the NA payload are crucial points in the transfection process. Here we report on the fabrication of a nanoscopic cellular delivery carrier that is additionally combined with a label-free intracellular sensor device, based on biocompatible fluorescent nanodiamond particles. The sensing function is engineered into nanodiamonds by using nitrogen-vacancy color centers, providing stable non-blinking luminescence. The device is used for monitoring NA transfection and the payload release in cells. The unpacking of NAs from a poly(ethyleneimine)-terminated nanodiamond surface is monitored using the color shift of nitrogen-vacancy centers in the diamond, which serve as a nanoscopic electric charge sensor. The proposed device innovates the strategies for NA imaging and delivery, by providing detection of the intracellular release of non-labeled NAs without affecting cellular processing of the NAs. Our system highlights the potential of nanodiamonds to act not merely as labels but also as non-toxic and non-photobleachable fluorescent biosensors reporting complex molecular events.
Asunto(s)
ADN , Nanodiamantes , Transfección , Animales , Células HT29 , Humanos , Luminiscencia , Ratones Endogámicos DBARESUMEN
OBJECTIVE: The goal of this study was to assess the electrochemical properties of boron-doped diamond (BDD) electrodes in relation to conventional titanium nitride (TiN) electrodes through in vitro and in vivo measurements. APPROACH: Electrochemical impedance spectroscopy, cyclic voltammetry and voltage transient (VT) measurements were performed in vitro after immersion in a 5% albumin solution and in vivo after subcutaneous implantation in rats for 6 weeks. MAIN RESULTS: In contrast to the TiN electrodes, the capacitance of the BDD electrodes was not significantly reduced in albumin solution. Furthermore, BDD electrodes displayed a decrease in the VTs and an increase in the pulsing capacitances immediately upon implantation, which remained stable throughout the whole implantation period, whereas the opposite was the case for the TiN electrodes. SIGNIFICANCE: These results reveal that BDD electrodes possess a superior biofouling resistance, which provides significantly stable electrochemical properties both in protein solution as well as in vivo compared to TiN electrodes.
Asunto(s)
Incrustaciones Biológicas , Boro/química , Diamante/química , Electrodos Implantados , Titanio/química , Albúminas/química , Animales , Capacidad Eléctrica , Técnicas Electroquímicas , Masculino , Fosfatidiletanolaminas , Ratas , Ratas Wistar , Propiedades de SuperficieRESUMEN
The main characteristics of the spatial variation of the photon and phonon wave fields at the band gap boundaries are analysed for a one-dimensional medium with periodic optical or acoustic parameters. The derivations are based on symmetry considerations and on analytical results derived from the basic differential equation for the wave field. A simple relation is derived between the band gap width and the derivative of the field intensity at the interface between the regions of high and low wave velocity. The general field characteristics are derived for some examples. Using the analysis a remarkable asymmetric behaviour of the wave absorption near the Brillouin zone boundaries can be explained in a straightforward way.
RESUMEN
The readout of negatively charged nitrogen-vacancy centre electron spins is essential for applications in quantum computation, metrology and sensing. Conventional readout protocols are based on the detection of photons emitted from nitrogen-vacancy centres, a process limited by the efficiency of photon collection. We report on an alternative principle for detecting the magnetic resonance of nitrogen-vacancy centres, allowing the direct photoelectric readout of nitrogen-vacancy centres spin state in an all-diamond device. The photocurrent detection of magnetic resonance scheme is based on the detection of charge carriers promoted to the conduction band of diamond by two-photon ionization of nitrogen-vacancy centres. The optical and photoelectric detection of magnetic resonance are compared, by performing both types of measurements simultaneously. The minima detected in the measured photocurrent at resonant microwave frequencies are attributed to the spin-dependent ionization dynamics of nitrogen-vacancy, originating from spin-selective non-radiative transitions to the metastable singlet state.
RESUMEN
We show that fluorescent nanodiamonds (FNDs) are among the few types of nanosensors that enable direct optical reading of noncovalent molecular events. The unique sensing mechanism is based on switching between the negatively charged and neutral states of NV centers which is induced by the interaction of the FND surface with charged molecules.
RESUMEN
Diamond is believed to be a promising material for medical dosimetry due to its tissue equivalence, mechanical and radiation hardness, and lack of solubility in water or in disinfecting agents. A number of diamond samples, obtained under different growth conditions at Limburg University, using the chemical vapour deposition (CVD) technique, was tested as thermoluminescence dosemeters. Their TL glow curve, TL response after doses of gamma rays, fading, and so on were studied at dose levels and for radiation modalities typical for radiotherapy. The investigated CVD diamonds displayed sensitivity comparable with that of MTS-N (Li:Mg,Ti) detectors, signal stability (reproducibility after several readouts) below 10% (1 SD) and no fading was found four days after irradiation. A dedicated CVD diamond plate was grown, cut into 20 detector chips (3 x 3 x 0.5 mm) and used for measuring the dose-depth distribution at different depths in a water phantom, for 60Co and six MV X ray radiotherapy beams. Due to the sensitivity of diamond to ambient light, it was difficult to achieve reproducibility comparable with that of standard LiF detectors.