Formation of Supported Graphene Oxide: Evidence for Enolate Species.

Graphene oxides are promising materials for novel electronic devices or anchoring of the active sites for catalytic applications. Here we focus on understanding the atomic oxygen (AO) binding and mobility on different regions of graphene (Gr) on Ru(0001). Differences in the Gr/Ru lattices result in the superstructure, which offers an array of distinct adsorption sites. We employ scanning tunneling microscopy and density functional theory to map out the chemical identity and stability of prepared AO functionalities in different Gr regions. The AO diffusion is utilized to establish that in the regions that are close to the metal substrate the terminally bonded enolate groups are strongly preferred over bridge-bonded epoxy groups. No oxygen species are observed on the graphene regions that are far from the underlying Ru, indicating their low relative stability. This study provides a clear fundamental basis for understanding the local structural, electronic factors and C-Ru bond strengthening/weakening processes that affect the stability of enolate and epoxy species.

Alternating chirality in the monolayer H2TPP on Cu(110)-(2 × 1)O.

In this work, the structure of the tetraphenylporphyrin (H2TPP) monolayer grown on the oxygen passivated Cu(110)-(2 × 1)O surface has been investigated with LT-STM and elucidated by DFT-calculations. The monolayer is commensurate with all molecules occupying the same adsorption site, but there are two molecules per unit cell. The STM images suggest alternating chirality for the molecules within one unit cell which is supported by DFT total energy calculations for monolayers on the Cu-O substrate. STM simulations for alternating and single chirality monolayers have subtle differences which indicate that the experimentally observed surface is one containing molecules with alternating chirality, that is racemicity within the unit cell.

Ordered arrays of size-selected oxide nanoparticles.

A bottom-up approach to produce a long-range ordered superlattice of monodisperse and isomorphic metal-oxide nanoparticles (NP) supported onto an oxide substrate is demonstrated. The synthetic strategy consists of self-assembling metallic NP on an ultrathin nanopatterned aluminum oxide template followed by a morphology-conserving oxidation process, and is exemplified in the case of Ni, but is generally applicable to a wide range of metallic systems. Both fully oxidized and core-shell metal-metal-oxide particles are synthesized, up to 3-4 nm in diameter, and characterized via spectroscopic and theoretical tools. This opens up a new avenue for probing unit and ensemble effects on the properties of oxide materials in the nanoscale regime.

Layer resolved evolution of the optical properties of α-sexithiophene thin films.

We report a combined reflectance difference spectroscopy and scanning tunneling microscopy study of ultrathin α-sexithiophene (6T) films deposited on the Cu(110)-(2×1)O surface. The correlation between the layer resolved crystalline structure and the corresponding optical spectra data reveals a highly sensitive dependence of the excitonic optical properties on the layer thickness and crystalline structure of the 6T film.

Tungsten and molybdenum oxide nanostructures: two-dimensional layers and nanoclusters.

W- and Mo-oxides form an interesting class of materials, featuring structural complexities, stoichiometric flexibility, and versatile physical and chemical properties that render them attractive for many applications in diverse fields of nanotechnologies. In nanostructured form, novel properties and functionalities emerge as a result of quantum size and confinement effects. In this topical review, W- and Mo-oxide nanosystems are examined with particular emphasis on two-dimensional (2D) layers and small molecular-type clusters. We focus on the epitaxial growth of 2D layers on metal single crystal surfaces and investigate their novel geometries and structures by a surface science approach. The coupling between the oxide overlayer and the metal substrate surface is a decisive element in the formation of the oxide structures and interfacial strain and charge transfer are shown to determine the lowest energy structures. Atomic structure models as determined by density functional theory (DFT) simulations are reported and discussed for various interface situations, with strong and weak coupling. Free-standing (quasi-)2D oxide layers, so-called oxide nanosheets, are attracting a growing interest recently in the applied research community because of their easy synthesis via wet-chemical routes. Although they consist typically of several atomic layers thick-not always homogeneous-platelet systems, their quasi-2D character induces a number of features that make them attractive for optoelectronic, sensor or biotechnological device applications. A brief account of recently published preparation procedures of W- and Mo-oxide nanosheets and some prototypical examples of proof of concept applications are reported here. (MO3)3(M = W, Mo) clusters can be generated in the gas phase in nearly monodisperse form by a simple vacuum sublimation technique. These clusters, interesting molecular-type structures by their own account, can be deposited on a solid surface in a controlled way and be condensed into 2D W- and Mo-oxide layers; solid-state chemical reactions with pre-deposited surface oxide layers to form 2D ternary oxide compounds (tungstates, molybdates) have also been reported. The clusters have been proposed as model systems for molecular studies of reactive centres in catalytic reactions. Studies of the catalysis of (MO3)3clusters in unsupported and supported forms, using the conversion of alcohols as model reactions, are discussed. Finally, we close with a brief outlook of future perspectives.

A momentum space view of the surface chemical bond.

Well-ordered and oriented monolayers of conjugated organic molecules can offer new perspectives on surface bonding. We will demonstrate the importance of the momentum distribution, or symmetry, of the adsorbate molecules' π orbitals in relation to the states available for hybridization at the metal surface. Here, the electronic band structure of the first monolayer of sexiphenyl on Cu(110) has been examined in detail with angle-resolved ultraviolet photoemission spectroscopy over a large momentum range and will be compared to measurements of a multilayer thin film and to density functional calculations. In the monolayer, the one-dimensional intramolecular band structure can still be recognized, allowing an accurate determination of orbital modification upon bonding and the relative energetic positions of the electronic levels. It is seen that the character of the molecular π orbitals is largely maintained despite strong mixing between Cu and molecular states and that the lowest unoccupied molecular orbital (LUMO) is filled by hybridization with Cu s,p states rather than through a charge transfer process. It is also shown that the momentum distribution of the substrate states involved and the periodicity of the molecular overlayer play a large role in the final E(k) distribution of the hybrid states. The distinct momentum distribution of the LUMO, interacting with the Cu substrate s,p valence bands around the gap in the surface projection of the bulk band structure, make this system a particularly illustrative example of momentum resolved hybridization. This system demonstrates that, for hybridization to occur, not only do states require overlap in energy and space, but also in momentum.

Synchrotron x-ray photoemission study of soft x-ray processed ultrathin glycine-water ice films.

Ultrathin glycine-water ice films have been prepared in ultrahigh vacuum by condensation of H(2)O and glycine at 90 K on single crystalline alumina surfaces and processed by soft x-ray (610 eV) exposure for up to 60 min. The physicochemical changes in the films were monitored using synchrotron x-ray photoemission spectroscopy. Two films with different amounts of H(2)O have been considered in order to evaluate the influence of the water ice content on the radiation-induced effects. The analysis of C1s, N1s, and O1s spectral regions together with the changes in the valence band spectra indicates that amino acid degradation occurs fast mainly via decarboxylation and deamination of pristine molecules. Enrichment of the x-ray exposed surfaces with fragments with carbon atoms without strong electronegative substituents (C-C and C-H) is documented as well. In the thinner glycine-water ice film (six layers of glycine + six layers of water) the 3D ice suffers strongly from the x-rays and is largely removed from the sample. The rate of photodecomposition of glycine in this film is about 30% higher than for glycine in the thicker film (6 layers of glycine + 60 layers of water). The photoemission results suggest that the destruction of amino acid molecules is caused by the direct interaction with the radiation and that no chemical attack of glycine by the species released by water radiolysis is detected.

Oxide-metal nanowires by oxidation of a one-dimensional Mn-Pd alloy: stability and reactivity.

Distinct one-dimensional (1D) oxide nanowires decorating the step edges of a stepped Pd(1 1 9) surface are formed by partial and complete oxidation of a 1D Mn-Pd alloy. Under full postoxidation treatment at 470-570 K, 1D MnO(2) nanowires coupled pseudomorphically to the Pd steps are obtained. Oxidized nanowires, which maintain the basic structural pattern of the 1D Mn-Pd alloy, are instead prepared by exposure of the Mn-Pd alloy to O(2) at 90 K and subsequent short heating to 400 K. A relatively weak Mn-O bonding characterizes these oxidized alloy wires, which are readily reduced by reaction with CO at moderate temperature (350 K). The here reported system emphasizes the influence of kinetic constraints in the formation of oxide nanostructures.

Revealing the buried interface: para-sexiphenyl thin films grown on TiO2(110).

The thickness dependent optical and electronic structure of para-sexiphenyl thin films grown on TiO(2)(110) at around 400 K reveals that the substrate is first wet by one monolayer of molecules lying with their long axis parallel to the [001] direction of the substrate, while the molecules in subsequent layers are almost standing upright. Whilst ultraviolet photoemission spectroscopy (UPS) is sensitive to the molecules in the outermost layer, reflection difference spectroscopy (RDS) shows that the molecules at the buried interface do not dewet and maintain the orientation of the original wetting monolayer.

Growth and Stability of Titanium Dioxide Nanoclusters on Graphene/Ru(0001).

Titanium dioxide/graphene composites have recently been demonstrated to improve the photocatalytic activity of TiO2 in visible light. To better understand the interactions of TiO2 with graphene we have investigated the growth of TiO2 nanoclusters on single-layer graphene/Ru(0001) using scanning tunneling microscopy (STM) and Auger electron spectroscopy (AES). Deposition of Ti in the O2 background at 300 K resulted in the formation of nanoclusters nucleating on intrinsic defects in the graphene (Gr) layer. The saturation nanocluster density decreased as the substrate temperature was increased from 300 to 650 K, while deposition at 700 K resulted in the significant etching of the Gr layer. We have also prepared nanoclusters with Ti2O3 stoichiometry using lower O2 pressures at 650 K. Thermal stability of the TiO2 nanoclusters prepared at 300 K was evaluated with AES and STM. No change in oxidation state for the TiO2 nanoclusters or etching of the Gr layer was observed up to ∼900 K. Annealing studies revealed that cluster ripening proceeds via a Smoluchowski mechanism below 800 K. Above 800 K, the changes in cluster shapes indicate an onset of diffusion within the clusters. At even higher temperatures, the nanoclusters undergo reduction to TiOx (x ≈ 1-1.5) which is accompanied by oxidation and etching of the Gr. Our studies demonstrate that highly thermally stable TiOx nanoclusters of controlled composition and morphology can be prepared on Gr supports.

Lattice Strain Defects in a Ceria Nanolayer.

An ultrathin two-dimensional CeO2 (ceria) phase on a Cu(110) surface has been fabricated and fully characterized by high-resolution scanning tunneling microscopy, photoelectron spectroscopy, and density functional theory. The atomic lattice structure of the ceria/Cu(110) system is revealed as a hexagonal CeO2(111)-type monolayer separated from the Cu(110) surface by a partly disordered Cu-O intercalated buffer layer. The epitaxial coupling of the two-dimensional ceria overlayer to the Cu(110)-O surface leads to a nanoscopic stripe pattern, which creates defect regions of quasi-periodic lattice distortions. The symmetry and lattice mismatch at the interface is clarified to be responsible for the topographic stripe geometry and the related anisotropic strain defect regions at the ceria surface. This ceria monolayer is in a fully oxidized and thermodynamically stable state.

Surface chemistry of ultrathin films of histidine on gold as probed by high-resolution synchrotron photoemission.

Procedures for the vacuum deposition of thin histidine films on polycrystalline Au(111) and their characterization with high-resolution synchrotron-radiation-based photoelectron spectroscopy are reported. The chemical form of histidine (anionic vs zwitterionic) and the nature of its interactions with the substrate (strong ionic-covalent vs weak van der Waals bonding) in mono- and multilayer films are analyzed. It is shown that water adsorption on a pre-prepared histidine film at 100 K results in protonation of histidine molecules and partial formation of hydroxyl anions. These chemical effects are carefully differentiated from spectral changes associated with radiation damage of the histidine films.

Cerium Oxide Nanoclusters on Graphene/Ru(0001): Intercalation of Oxygen via Spillover.

Cerium oxide is an important catalytic material known for its ability to store and release oxygen, and as such, it has been used in a range of applications, both as an active catalyst and as a catalyst support. Using scanning tunneling microscopy and Auger electron spectroscopy, we investigated oxygen interactions with CeOx nanoclusters on a complete graphene monolayer-covered Ru(0001) surface at elevated temperatures (600-725 K). Under oxidizing conditions (PO2 = 1 × 10(-7) Torr), oxygen intercalation under the graphene layer is observed. Time dependent studies demonstrate that the intercalation proceeds via spillover of oxygen from CeOx nanoclusters through the graphene (Gr) layer onto the Ru(0001) substrate and extends until the Gr layer is completely intercalated. Atomically resolved images further show that oxygen forms a p(2 × 1) structure underneath the Gr monolayer. Temperature dependent studies yield an apparent kinetic barrier for the intercalation of 1.21 eV. This value correlates well with the theoretically determined value for the reduction of small CeO2 clusters reported previously. At higher temperatures, the intercalation is followed by a slower etching of the intercalated graphene (apparent barrier of 1.60 eV). Vacuum annealing of the intercalated Gr leads to the formation of carbon monoxide, causing etching of the graphene film, demonstrating that the spillover of oxygen is not reversible. In agreement with previous studies, no intercalation is observed on a complete graphene monolayer without CeOx clusters, even in the presence of a large number of point defects. These studies demonstrate that the easily reducible CeOx clusters act as intercalation gateways capable of efficiently delivering oxygen underneath the graphene layer.

Growth of Ceria Nano-Islands on a Stepped Au(788) Surface.

The growth morphology and structure of ceria nano-islands on a stepped Au(788) surface has been investigated by scanning tunneling microscopy (STM) and low-energy electron diffraction (LEED). Within the concept of physical vapor deposition, different kinetic routes have been employed to design ceria-Au inverse model catalysts with different ceria nanoparticle shapes and arrangements. A two-dimensional superlattice of ceria nano-islands with a relatively narrow size distribution (5 ± 2 nm²) has been generated on the Au(788) surface by the postoxidation method. This reflects the periodic anisotropy of the template surface and has been ascribed to the pinning of ceria clusters and thus nucleation on the fcc domains of the herringbone reconstruction on the Au terraces. In contrast, the reactive evaporation method yields ceria islands elongated in [01-1] direction, i.e., parallel to the step edges, with high aspect ratios (~6). Diffusion along the Au step edges of ceria clusters and their limited step crossing in conjunction with a growth front perpendicular to the step edges is tentatively proposed to control the ceria growth under reactive evaporation conditions. Both deposition recipes generate two-dimensional islands of CeO2(111)-type O-Ce-O single and double trilayer structures for submonolayer coverages.

Revealing the Buried Metal-Organic Interface: Restructuring of the First Layer by van der Waals Forces.

With the use of molecular manipulation in a cryogenic scanning tunneling microscope, the structure and rearrangement of sexiphenyl molecules at the buried interface of the organic film with the Cu(110) substrate surface have been revealed. It is shown that a reconstruction of the first monolayer of flat lying molecules occurs due to the van der Waals pressure from subsequent layers. In this rearrangement, additional sexiphenyl molecules are forced into the established complete monolayer and adopt an edge-on configuration. Incorporation of second layer molecules into the first layer is also demonstrated by purposely pushing sexiphenyl molecules with the STM tip. The results indicate that even chemisorbed organic layers at interfaces can be significantly influenced by external stress from van der Waals forces of subsequent layers.

Metal tungstates at the ultimate two-dimensional limit: fabrication of a CuWO4 nanophase.

Metal tungstates (with general formula MWO4) are functional materials with a high potential for a diverse set of applications ranging from low-dimensional magnetism to chemical sensing and photoelectrocatalytic water oxidation. For high level applications, nanoscale control of film growth is necessary, as well as a deeper understanding and characterization of materials properties at reduced dimensionality. We succeeded in fabricating and characterizing a two-dimensional (2-D) copper tungstate (CuWO4). For the first time, the atomic structure of an ultrathin ternary oxide is fully unveiled. It corresponds to a CuWO4 monolayer arranged in three sublayers with stacking O-W-O/Cu from the interface. The resulting bidimensional structure forms a robust framework with localized regions of anisotropic flexibility. Electronically it displays a reduced band gap and increased density of states close to the Fermi level with respect to the bulk compound. These unique features open a way for new applications in the field of photo- and electrocatalysis, while the proposed synthesis method represents a radically new and general approach toward the fabrication of 2-D ternary oxides.

Redox processes at a nanostructured interface under strong electric fields.

Manipulation of chemistry and film growth via external electric fields is a longstanding goal in surface science. Numerous systems have been predicted to show such effects but experimental evidence is sparse. Here we demonstrate in a custom-designed UHV apparatus that the application of spatially extended, homogeneous, very high (>1 V nm(-1)) DC-fields not only changes the system energetics but triggers dynamic processes which become important much before static contributions appreciably modify the potential energy landscape. We take a well characterized ultrathin NiO film on a Ag(100) support as a proof-of-principle test case, and show how it gets reduced to supported Ni clusters under fields exceeding the threshold of +0.9 V nm(-1). Using an effective model, we trace the observed interfacial redox process down to a dissociative electron attachment resonant mechanism. The proposed approach can be easily implemented and generally applied to a wide range of interfacial systems, thus opening new opportunities for the manipulation of film growth and reaction processes at solid surfaces under strong external fields.

Work Function of Oxide Ultrathin Films on the Ag(100) Surface.

Theoretical calculations of the work function of monolayer (ML) and bilayer (BL) oxide films on the Ag(100) surface are reported and analyzed as a function of the nature of the oxide for first-row transition metals. The contributions due to charge compression, charge transfer and rumpling are singled out. It is found that the presence of empty d-orbitals in the oxide metal can entail a charge flow from the Ag(100) surface to the oxide film which counteracts the decrease in the work function due to charge compression. This flow can also depend on the thickness of the film and be reduced in passing from ML to BL systems. A regular trend is observed along first-row transition metals, exhibiting a maximum for CuO, in which the charge flow to the oxide is so strong as to reverse the direction of rumpling. A simple protocol to estimate separately the contribution due to charge compression is discussed, and the difference between the work function of the bare metal surface and a Pauling-like electronegativity of the free oxide slabs is used as a descriptor quantity to predict the direction of charge transfer.