Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 2 de 2
Filtrar
Más filtros

Banco de datos
Tipo del documento
Intervalo de año de publicación
1.
Opt Lett ; 41(14): 3277-80, 2016 Jul 15.
Artículo en Inglés | MEDLINE | ID: mdl-27420514

RESUMEN

We analyze the higher-order core mode content in various designs of antiresonant hollow core fibers using spatially and spectrally resolved imaging. Hollow core fibers have great potential for a variety of applications, and understanding their mode content is crucial for many of these. Two different designs of hollow core fibers are considered, the first with eight nontouching rings and the second with eight touching rings forming a closed boundary core. The mode content of each fiber is measured as a function of length and bending diameter. Low amounts of higher-order modes were found in both hollow core fibers, and mode specific and bending-dependent losses have been determined. This study aids in understanding the core modes of hollow core fibers and possible methods of controlling them.

2.
Opt Lett ; 40(22): 5188-91, 2015 Nov 15.
Artículo en Inglés | MEDLINE | ID: mdl-26565831

RESUMEN

A bending sensor is demonstrated using the combination of a mode-selective photonic lantern (PL) and a multicore fiber. A short section of three-core fiber with strongly coupled cores is used as the bend sensitive element. The supermodes of this fiber are highly sensitive to the refractive index profiles of the cores. Small bend-induced changes result in drastic changes of the supermodes, their excitation, and interference. The multicore fiber is spliced to a few-mode fiber and excites bend dependent amounts of each of the six linearly polarized (LP) modes guided in the few-mode fiber. A mode selective PL is then used to demultiplex the modes of the few-mode fiber. Relative power measurements at the single-mode PL output ports reveal a high sensitivity to bending curvature and differential power distributions according to bending direction, without the need for spectral measurements. High direction sensitivity is demonstrated experimentally as well as in numerical simulations. Relative power shifts of up to 80% have been measured at radii of approximately 20 cm, and good sensitivity was observed with radii as large as 10 m, making this sensing system useful for applications requiring both large and small curvature measurements.

SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA