RESUMEN
Field-effect phototransistors feature gate voltage modulation, allowing dynamic performance control and significant signal amplification. A field-effect phototransistor can be designed to be inherently either unipolar or ambipolar in its response. However, conventionally, once a field-effect phototransistor has been fabricated, its polarity cannot be changed. Herein, a polarity-tunable field-effect phototransistor based on a graphene/ultrathin Al2O3/Si structure is demonstrated. Light can modulate the gating effect of the device and change the transfer characteristic curve from unipolar to ambipolar. This photoswitching in turn produces a significantly improved photocurrent signal. The introduction of an ultrathin Al2O3 interlayer also enables the phototransistor to achieve a responsivity in excess of 105 A/W, a 3 dB bandwidth of 100 kHz, a gain-bandwidth product of 9.14 × 1010 s-1, and a specific detectivity of 1.91 × 1013 Jones. This device architecture enables the gain-bandwidth trade-off in current field-effect phototransistors to be overcome, demonstrating the feasibility of simultaneous high-gain and fast-response photodetection.
RESUMEN
The photoconductive detector based on a graphene-silicon heterostructure retains excellent optoelectrical properties, in which the graphene plays an indispensable role, acting as the carrier transporting channel. Herein, we systematically investigate by simulation and experiment how doping graphene will affect the performance of graphene-silicon hybrid photoconductors. Compared with lightly p-doped graphene devices, the responsivity can be made nine times better through increasing the p-type doping level. In addition, the net photocurrent can also be enhanced by about four times through increasing the n-type doping level of graphene. We attribute this improvement to the barrier height change adjusted by doping graphene, which can optimize the lifetime and transport of photocarriers. Such a graphene-doping method, that manipulates the junction region, could offer useful guidance for achieving high-performance graphene photodetectors.
RESUMEN
We present an insulator-semiconductor-metal plasmonic hot-electron photodetector based on a grating structure that uses monolayer MoS2 as a semiconductor. Within the MoS2 bandgap wavelength, the choice of design can be used to increase the photocurrent via the enhanced electric field of surface plasmons. Beyond the bandgap, hot electrons generated by surface plasmons can contribute to the photocurrent, which overcomes the limitation of the semiconductor's bandgap. Using a finite element method simulation, we determined the optimal geometric configuration for the grating and metal parameters. Moreover, we compared our conformal structure with typical planar and metal gratings. The results show that our structure enables the maximum optical enhancement for the semiconductor and the highest utilization ratio of hot electrons among these three architectures. In contrast with a conventional metal-semiconductor-metal structure in which the net current is the difference between forward and backward currents, the proposed structure has only one layer of metal with unidirectional current, which can further enhance the net current and hence the responsivity.
RESUMEN
All-optical modulators based on graphene show great promise for on-chip optical interconnects. However, the modulation performance of all-optical modulators is usually based on the interaction between graphene and the fiber, limiting their potential in high integration. Based on this point, an all-optical modulator in a dielectric-loaded waveguide (DLW) with a graphene-silicon heterojunction structure (GSH) is proposed. The DLW raises the waveguide mode, which provides a strong light-graphene interaction. Sufficient tuning of the graphene Fermi energy beyond the Pauli blocking effect is obtained with the presented GSH structure. Under the modulation light with a wavelength of 532 nm and a power of 60 mW, a modulation efficiency of 0.0275 dB µm-1 is achieved for light with a communication wavelength of 1.55 µm in the experiment. This modulator has the advantage of having a compact footprint, which may make it a candidate for achieving a highly integrated all-optical modulator.
RESUMEN
Two-dimensional molybdenum disulfide (MoS2) is a promising material for ultrasensitive photodetectors owing to its tunable band gap and high absorption coefficient. However, controlled synthesis of high-quality, large-area monolayer molybdenum disulfide (MoS2) is still a challenge in practical application. In this work, we report a gold foil assistant chemical vapor deposition method for the synthesis of large-size (>400 µm) single-crystal MoS2 film on a silicon dioxide (SiO2) substrate. The influence of Au foil in enlarging the size of single-crystal MoS2 is investigated systemically using thermal simulation in Ansys workbench 16.0, including thermal conductivity, temperature difference and thermal relaxation time of the interface of SiO2 substrate and Au foil, which indicate that Au foil can increase the temperature of the SiO2 substrate rapidly and decrease the temperature difference between the oven and substrate. Finally, the properties of the monolayer MoS2 film are further confirmed using back-gated field-effect transistors: a high photoresponse of 15.6 A W-1 and a fast photoresponse time of 100 ms. The growth techniques described in this study could be beneficial for the development of other atomically thin two-dimensional transition metal dichalcogenide materials.
RESUMEN
Serving as the "eyes" and "ears" of the Internet of Things, optical and acoustic sensors are the fundamental components in hardware systems. Nowadays, mainstream hardware systems, often comprising numerous discrete sensors, conversion modules, and processing units, tend to result in complex architectures that are less efficient compared to human sensory pathways. Here, a visual-audio photodetector inspired by the human perception system is proposed to enable all-in-one visual and acoustic signal detection with computing capability. This device not only captures light but also optically records sound waves, thus achieving "watching" and "listening" within a single unit. The gate-tunable positive, negative, and zero photoresponses lead to highly programmable responsivities. This programmability enables the execution of diverse functions, including visual feature extraction, object classification, and sound wave manipulation. These results showcase the potential of expanding perception approaches in neuromorphic devices, opening up new possibilities to craft intelligent and compact hardware systems.
RESUMEN
Internal photoemission is a prominent branch of the photoelectric effect and has emerged as a viable method for detecting photons with energies below the semiconductor bandgap. This breakthrough has played a significant role in accelerating the development of infrared imaging in one chip with state-of-the-art silicon techniques. However, the performance of these Schottky infrared detectors is currently hindered by the limit of internal photoemission; specifically, a low Schottky barrier height is inevitable for the detection of low-energy infrared photons. Herein, a distinct paradigm of Schottky infrared detectors is proposed to overcome the internal photoemission limit by introducing an optically tunable barrier. This device uses an infrared absorbing material-sensitized Schottky diode, assisted by the highly adjustable Fermi level of graphene, which subtly decouples the photon energy from the Schottky barrier height. Correspondingly, a broadband photoresponse spanning from ultraviolet to mid-wave infrared is achieved, with a high specific detectivity of 9.83 × 1010 cm Hz1/2 W-1 at 2,700 nm and an excellent specific detectivity of 7.2 × 109 cm Hz1/2 W-1 at room temperature under blackbody radiation. These results address a key challenge in internal photoemission and hold great promise for the development of the Schottky infrared detector with high sensitivity and room temperature operation.
RESUMEN
Dirac semimetals have demonstrated significant attraction in the field of optoelectronics due to their unique bandgap structure and high carrier mobility. Combining them with classical semiconductor materials to form heterojunctions enables broadband optoelectronic conversion at room temperature. However, the low light absorption of layered Dirac semimetals substantially limits the device's responsivity in the infrared band. Herein, a three-dimensional (3D) heterostructure, composed of silicon nanopillars (SiNPs) and a conformal PtTe2 film, is proposed and demonstrated to enhance the photoresponsivity for uncooled broadband detection. The light trapping effect in the 3D heterostructure efficiently promotes the interaction between light and PtTe2, while also enhancing the light absorption efficiency of silicon, which enables the enhancement of the device responsivity across a broadband spectrum. Experimentally, the PtTe2-SiNPs heterojunction device demonstrates excellent photoelectric conversion behavior across the visible, near-infrared, and long-wave infrared (LWIR) bands, with its responsivity demonstrating an order-of-magnitude improvement compared to the counterparts with planar silicon heterojunctions. Under 11 µm laser irradiation, the noise equivalent power (NEP) can reach 1.76 nW·Hz-1/2 (@1 kHz). These findings offer a strategic approach to the design and fabrication of high-performance broadband photodetectors based on Dirac semimetals.
RESUMEN
Low-noise, high-performance long-wave infrared detectors play a crucial role in diverse applications, including in the industrial, security, and medical fields. However, the current performance of long-wave detectors is constrained by the noise associated with narrow bandgaps. Therefore, exploring novel heterostructures for long-wavelength infrared detection is advantageous for the development of compact and high-performance infrared sensing. In this investigation, we present a MoS2/type II superlattice mixed-dimensional van der Waals barrier long-wave infrared detector (Mixed-vdWH). Through the design of the valence band barrier, substantial suppression of device dark noise is achieved, resulting in 2 orders of magnitude reduction in dark current. The device exhibits outstanding performance, with D* reaching 4 × 1010 Jones. This integration approach synergizes the distinctive properties of two-dimensional layered materials (2DLM) with the well-established processing techniques of traditional three-dimensional semiconductor materials, offering a compelling avenue for the large-scale integration of 2DLM.
RESUMEN
High quantum efficiency and wide-band detection capability are the major thrusts of infrared sensing technology. However, bulk materials with high efficiency have consistently encountered challenges in integration and operational complexity. Meanwhile, two-dimensional (2D) semimetal materials with unique zero-bandgap structures are constrained by the bottleneck of intrinsic quantum efficiency. Here, we report a near-mid infrared ultra-miniaturized graphene photodetector with configurable 2D potential well. The 2D potential well constructed by dielectric structures can spatially (laterally and vertically) produce a strong trapping force on the photogenerated carriers in graphene and inhibit their recombination, thereby improving the external quantum efficiency (EQE) and photogain of the device with wavelength-immunity, which enable a high responsivity of 0.2 A/W-38 A/W across a broad infrared detection band from 1.55 to 11 µm. Thereafter, a room-temperature detectivity approaching 1 × 109 cm Hz1/2 W-1 is obtained under blackbody radiation. Furthermore, a synergistic effect of electric and light field in the 2D potential well enables high-efficiency polarization-sensitive detection at tunable wavelengths. Our strategy opens up alternative possibilities for easy fabrication, high-performance and multifunctional infrared photodetectors.
RESUMEN
Position-sensitive detectors (PSDs) are of great significance to optical communication, automatic alignment, and dislocation detection domains, by precisely obtaining the position information of infrared light spots which are invisible to human eyes. Herein, a kind of PSD based on graphene/germanium (Ge) heterojunction architecture is proposed and demonstrated, which exhibits amplified signals by unitizing the charge injection effect. Driven by the graphene/Ge heterojunction, a large number of photogenerated carriers diffuse from the incident position of the light spot and subsequently inject into graphene, which ultimately generates a photoresponse with high efficiency. The experimental results show that the device can exhibit a fast response speed of 3 µs, a high responsivity of ~40 A/W, and a detection distance of 3000 µm at the 1550 nm band, which hints that the graphene/Ge heterojunction can be used as an efficient platform for near-infrared light spot position sensing.
RESUMEN
Two-dimensional molybdenum disulfide (MoS2), featuring unique optoelectronic properties, has attracted tremendous interest in developing novel photodetection devices. However, the limited light absorption and small carrier transport rate of the monolayer MoS2 result in low photoresponse, and the large band gap limits its detection range in the visible region. In this study, we propose a nanoslit array-MoS2 hybrid device architecture with enhanced and broadened photoresponse. The nanoslit array can localize free-space light to achieve strong interactions with MoS2, and acts as the channel to improve charge transport. As a result, the Au nanoslit array-MoS2 hybrid detector exhibits a nearly 100-fold increase in photocurrent compared to the pure MoS2 device. More importantly, the hybrid device can broaden the photoresponse to the optical communication band of 1550 nm which is lower than the band gap of MoS2, by efficiently utilizing the hot carriers generated by the Au nanoslits. The experimental results are supported by both theoretical analysis and numerical simulation. Since our demonstration leverages the engineering of the hybrid photodetectors with metal nanostructures rather than semiconductor materials, it should be universal and applicable to other devices for broadband, high-efficiency photoelectric conversion.
RESUMEN
The photogating effect in hybrid structures has manifested itself as a reliable and promising approach for photodetectors with ultrahigh responsivity. A crucial factor of the photogating effect is the built-in potential at the interface, which controls the separation and harvesting of photogenerated carriers. So far, the primary efforts of designing the built-in potential rely on discovering different materials and developing multilayer structures, which may raise problems in the compatibility with the standard semiconductor production line. Here, we report an enhanced photogating effect in a monolayer graphene photodetector based on a structured substrate, where the built-in potential is established by the mechanism of potential fluctuation engineering. We find that the enhancement factor of device responsivity is related to a newly defined parameter, namely, fluctuation period rate (Pf). Compared to the device without a nanostructured substrate, the responsivity of the device with an optimized Pf is enhanced by 100 times, reaching a responsivity of 240 A/W and a specific detectivity, D*, of 3.4 × 1012 Jones at 1550 nm wavelength and room temperature. Our experimental results are supported by both theoretical analysis and numerical simulation. Since our demonstration of the graphene photodetectors leverages the engineering of structures with monolayer graphene rather than materials with a multilayer complex structure. it should be universal and applicable to other hybrid photodetectors.
RESUMEN
Highly sensitive short-wave infrared (SWIR) detectors, compatible with the silicon-based complementary metal oxide semiconductor (CMOS) process, are regarded as the key enabling components in the miniaturized system for weak signal detection. To date, the high photogain devices are greatly limited by a large bias voltage, low-temperature refrigeration, narrow response band, and complex fabrication processes. Here, we demonstrate high photogain detectors working in the SWIR region at room temperature, which use graphene for charge transport and Te-hyperdoped silicon (Te-Si) for infrared absorption. The prolonged lifetime of carriers, combined with the built-in potential generated at the interface between the graphene and the Te-Si, leads to an ultrahigh photogain of 109 at room temperature (300 K) for 1.55 µm light. The gain can be improved to 1012, accompanied by a noise equivalent power (NEP) of 0.08 pW Hz-1/2 at 80 K. Moreover, the proposed device exhibits a NEP of 4.36 pW Hz-1/2 at 300 K at the wavelength of 2.7 µm, which is exceeding the working region of InGaAs detectors. This research shows that graphene can be used as an efficient platform for silicon-based SWIR detection and provides a strategy for the low-power, uncooled, high-gain infrared detectors compatible with the CMOS process.
RESUMEN
Photodetectors based on two-dimensional (2D) materials such as monolayer MoS2 are attractive because they can be directly integrated into the current metal-oxide semiconductor (CMOS) structures. Unfortunately, such devices suffer from low responsivity due to low absorption by the monolayer MoS2. Combining MoS2 with plasmonic nanostructures is an alternative solution for enhancing the absorption of the 2D semiconductor, and this can drastically increase the photoresponsivity of the corresponding photodetector. Herein, a device incorporating a grating-patterned nanoparticle structure is fabricated using traditional photolithography together with an annealing step. We demonstrate that this new structure leads to a strong enhancement in the photocurrent due to the coupling of the MoS2 to localized surface plasmons in the nanoparticle grating. Compared to a simple Au nanoparticle array, the nanoparticle grating structure generates a 100% increase in optical absorption. Thus, under 532 nm illumination, the composite nanoparticle grating/monolayer MoS2 integrated photodetector shows a 111-fold increase in the photocurrent compared to the same device in the absence of nanoparticles. The gateless responsivity can be up to 38.57 A/W and a specific detectivity of 9.89 × 109 Jones is realized. Moreover, photothermal flux derivations indicate that, in addition to the expected increase due to light-generated carrier multiplication, the thermal effects of plasmons provide a significant contribution to the photocurrent enhancement.