Bone quality following peripubertal growth in a mouse model of transmasculine gender-affirming hormone therapy.

During peri-puberty, bone growth and the attainment peak bone mass is driven predominantly by sex steroids. This is important when treating transgender and gender diverse youth, who have become increasingly present at pediatric clinics. Analogues of gonadotropin-releasing hormone (GnRH) are commonly prescribed to transgender and gender diverse youth prior to starting gender-affirming hormone therapy (GAHT). However, the impact of GnRH agonists on long bones with the addition of GAHT is relatively unknown. To explore this, we developed a trans-masculine model by introducing either GnRHa or vehicle treatment to female-born mice at a pre-pubertal age. This treatment was followed by male GAHT (testosterone, T) or control treatment three weeks later. Six weeks after T therapy, bone quality was compared between four treatment groups: Control (vehicle only), GnRHa-only, GnRHa + T, and T-only. Bone length/size, bone shape, mechanical properties, and trabecular morphology were modulated by GAHT. Independent of GnRHa administration, mice treated with T had shorter femurs, larger trabecular volume and increased trabecular number, higher trabecular bone mineral density, and wider superstructures on the surface of bone (e.g., third trochanters) when compared to control or GnRHa-only mice. In conclusion, prolonged treatment of GnRHa with subsequent GAHT treatment directly affect the composition, parameters, and morphology of the developing long bone. These findings provide insight to help guide clinical approaches to care for transgender and gender diverse youth.

Structural differences contributing to sex-specific associations between FN BMD and whole-bone strength for adult White women and men.

Hip areal BMD (aBMD) is widely used to identify individuals with increased fracture risk. Low aBMD indicates low strength, but this association differs by sex with men showing greater strength for a given aBMD than women. To better understand the structural basis giving rise to this sex-specific discrepancy, cadaveric proximal femurs from White female and male donors were imaged using nano-CT and loaded in a sideways fall configuration to assess strength. FN pseudoDXA images were generated to identify associations among structure, aBMD, and strength that differ by sex. Strength correlated significantly with pseudoDXA aBMD for females (R2 = 0.468, P < .001) and males (R2 = 0.393, P < .001), but the elevations (y-intercepts) of the linear regressions differed between sexes (P < .001). Male proximal femurs were 1045 N stronger than females for a given pseudoDXA aBMD. However, strength correlated with pseudoDXA BMC for females (R2 = 0.433, P < .001) and males (R2 = 0.443, P < .001) but without significant slope (P = .431) or elevation (P = .058) differences. Dividing pseudoDXA BMC by FN-width, total cross-sectional area, or FN-volume led to significantly different associations between strength and the size-adjusted BMC measures for women and men. Three structural differences were identified that differentially affected aBMD and strength for women and men: First, men had more bone mass per unit volume than women; second, different cross-sectional shapes resulted in larger proportions of bone mass orthogonal to the DXA image for men than women; and third, men and women had different proportions of cortical and trabecular bone relative to BMC. Thus, the proximal femurs of women were not smaller versions of men but were constructed in fundamentally different manners. Dividing BMC by a bone size measure was responsible for the sex-specific associations between hip aBMD and strength. Thus, a new approach for adjusting measures of bone mass for bone size and stature is warranted.

Associations Among Hip Structure, Bone Mineral Density, and Strength Vary With External Bone Size in White Women.

Bone mineral density (BMD) is heavily relied upon to reflect structural changes affecting hip strength and fracture risk. Strong correlations between BMD and strength are needed to provide confidence that structural changes are reflected in BMD and, in turn, strength. This study investigated how variation in bone structure gives rise to variation in BMD and strength and tested whether these associations differ with external bone size. Cadaveric proximal femurs (n = 30, White women, 36-89+ years) were imaged using nanocomputed tomography (nano-CT) and loaded in a sideways fall configuration to assess bone strength and brittleness. Bone voxels within the nano-CT images were projected onto a plane to create pseudo dual-energy X-ray absorptiometry (pseudo-DXA) images consistent with a clinical DXA scan. A validation study using 19 samples confirmed pseudo-DXA measures correlated significantly with those measured from a commercially available DXA system, including bone mineral content (BMC) (R 2  = 0.95), area (R 2  = 0.58), and BMD (R 2  = 0.92). BMD-strength associations were conducted using multivariate linear regression analyses with the samples divided into narrow and wide groups by pseudo-DXA area. Nearly 80% of the variation in strength was explained by age, body weight, and pseudo-DXA BMD for the narrow subgroup. Including additional structural or density distribution information in regression models only modestly improved the correlations. In contrast, age, body weight, and pseudo-DXA BMD explained only half of the variation in strength for the wide subgroup. Including bone density distribution or structural details did not improve the correlations, but including post-yield deflection (PYD), a measure of bone material brittleness, did increase the coefficient of determination to more than 70% for the wide subgroup. This outcome suggested material level effects play an important role in the strength of wide femoral necks. Thus, the associations among structure, BMD, and strength differed with external bone size, providing evidence that structure-function relationships may be improved by judiciously sorting study cohorts into subgroups. © 2022 The Authors. JBMR Plus published by Wiley Periodicals LLC on behalf of American Society for Bone and Mineral Research.

Morphology of Mouse Anterior Cruciate Ligament-Complex Changes Following Exercise During Pubertal Growth.

Postnatal development and the physiological loading response of the anterior cruciate ligament (ACL) complex (ACL proper, entheses, and bony morphology) is not well understood. We tested whether the ACL-complex of two inbred mouse strains that collectively encompass the musculoskeletal variation observed in humans would demonstrate significant morphological differences following voluntary cage-wheel running during puberty compared with normal cage activity controls. Female A/J and C57BL/6J (B6) 6-week-old mice were provided unrestricted access to a standard cage-wheel for 4 weeks. A/J-exercise mice showed a 6.3% narrower ACL (p = 0.64), and a 20.1% more stenotic femoral notch (p < 0.01) while B6-exercise mice showed a 12.3% wider ACL (p = 0.10), compared with their respective controls. Additionally, A/J-exercise mice showed a 5.3% less steep posterior medial tibial slope (p = 0.07) and an 8.8% less steep posterior lateral tibial slope (p = 0.07), while B6-exercise mice showed a 9.8% more steep posterior medial tibial slope (p < 0.01) than their respective controls. A/J-exercise mice also showed more reinforcement of the ACL tibial enthesis with a 20.4% larger area (p < 0.01) of calcified fibrocartilage distributed at a 29.2% greater depth (p = 0.02) within the tibial enthesis, compared with their controls. These outcomes suggest exercise during puberty significantly influences ACL-complex morphology and that inherent morphological differences between these mice, as observed in their less active genetically similar control groups, resulted in a divergent phenotypic outcome between mouse strains. © 2019 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 37:1910-1919, 2019.

Differential Adaptive Response of Growing Bones From Two Female Inbred Mouse Strains to Voluntary Cage-Wheel Running.

The phenotypic response of bones differing in morphological, compositional, and mechanical traits to an increase in loading during growth is not well understood. We tested whether bones of two inbred mouse strains that assemble differing sets of traits to achieve mechanical homeostasis at adulthood would show divergent responses to voluntary cage-wheel running. Female A/J and C57BL6/J (B6) 4-week-old mice were provided unrestricted access to a standard cage-wheel for 4 weeks. A/J mice have narrow and highly mineralized femora and B6 mice have wide and less mineralized femora. Both strains averaged 2 to 9.5 km of running per day, with the average-distance run between strains not significantly different (p = 0.133). Exercised A/J femora showed an anabolic response to exercise with the diaphyses showing a 2.8% greater total area (Tt.Ar, p = 0.06) and 4.7% greater cortical area (Ct.Ar, p = 0.012) compared to controls. In contrast, exercised B6 femora showed a 6.2% (p < 0.001) decrease in Tt.Ar (p < 0.001) and a 6.7% decrease in Ct.Ar (p = 0.133) compared to controls, with the femora showing significant marrow infilling (p = 0.002). These divergent morphological responses to exercise, which did not depend on the daily distance run, translated to a 7.9% (p = 0.001) higher maximum load (ML) for exercised A/J femora but no change in ML for exercised B6 femora compared to controls. A consistent response was observed for the humeri but not the vertebral bodies. This differential outcome to exercise has not been previously observed in isolated loading or forced treadmill running regimes. Our findings suggest there are critical factors involved in the metabolic response to exercise during growth that require further consideration to understand how genotype, exercise, bone morphology, and whole-bone strength interact during growth. © 2018 The Authors. JBMR Plus is published by Wiley Periodicals, Inc. on behalf of the American Society for Bone and Mineral Research.

Canalization Leads to Similar Whole Bone Mechanical Function at Maturity in Two Inbred Strains of Mice.

Previously, we showed that cortical mineralization is coordinately adjusted to mechanically offset external bone size differences between A/J (narrow) and C57BL/6J (wide) mouse femora to achieve whole bone strength equivalence at adulthood. The identity of the genes and their interactions that are responsible for establishing this homeostatic state (ie, canalization) remain unknown. We hypothesize that these inbred strains, whose interindividual differences in bone structure and material properties mimic that observed among humans, achieve functional homeostasis by differentially adjusting key molecular pathways regulating external bone size and mineralization throughout growth. The cortices of A/J and C57BL/6J male mouse femora were phenotyped and gene expression levels were assessed across growth (ie, ages 2, 4, 6, 8, 12, 16 weeks). A difference in total cross-sectional area (p < 0.01) and cortical tissue mineral density were apparent between mouse strains by age 2 weeks and maintained at adulthood (p < 0.01). These phenotypic dissimilarities corresponded to gene expression level differences among key regulatory pathways throughout growth. A/J mice had a 1.55- to 7.65-fold greater expression among genes inhibitory to Wnt pathway induction, whereas genes involved in cortical mineralization were largely upregulated 1.50- to 3.77-fold to compensate for their narrow diaphysis. Additionally, both mouse strains showed an upregulation among Wnt pathway antagonists corresponding to the onset of adult ambulation (ie, increased physiological loads). This contrasts with other studies showing an increase in Wnt pathway activation after functionally isolated, experimental in vivo loading regimens. A/J and C57BL/6J long bones provide a model to develop a systems-based approach to identify individual genes and the gene-gene interactions that contribute to trait differences between the strains while being involved in the process by which these traits are coordinately adjusted to establish similar levels of mechanical function, thus providing insight into the process of canalization. © 2017 American Society for Bone and Mineral Research.

Genetic perturbations that impair functional trait interactions lead to reduced bone strength and increased fragility in mice.

Functional adaptation may complicate the choice of phenotype used in genetic studies that seek to identify genes contributing to fracture susceptibility. Often, genetic variants affecting one trait are compensated by coordinated changes in other traits. Bone fracture is a prototypic example because mechanical function of long bones (stiffness and strength) depends on how the system coordinately adjusts the amount (cortical area) and quality (tissue-mineral density, TMD) of bone tissue to mechanically offset the natural variation in bone robustness (total area/length). We propose that efforts aimed at identifying genes regulating fracture resistance will benefit from better understanding how functional adaptation contributes to the genotype-phenotype relationship. We analyzed the femurs of C57BL/6J-Chr(A/J)/NaJ Chromosome Substitution Strains (CSSs) to systemically interrogate the mouse genome for chromosomes harboring genes that regulate mechanical function. These CSSs (CSS-i, i=the substituted chromosome) showed changes in mechanical function on the order of -26.6 to +11.5% relative to the B6 reference strain after adjusting for body size. Seven substitutions showed altered robustness, cortical area, or TMD, but no effect on mechanical function (CSS-4, 5, 8, 9, 17, 18, 19); six substitutions showed altered robustness, cortical area, or TMD, and reduced mechanical function (CSS-1, 2, 6, 10, 12, 15); and one substitution also showed reduced mechanical function but exhibited no significant changes in the three physical traits analyzed in this study (CSS-3). A key feature that distinguished CSSs that maintained function from those with reduced function was whether the system adjusted cortical area and TMD to the levels needed to compensate for the natural variation in bone robustness. These results provide a novel biomechanical mechanism linking genotype with phenotype, indicating that genes control function not only by regulating individual traits, but also by regulating how the system coordinately adjusts multiple traits to establish function.