New insights on collagen structural organization and spatial distribution around dental implants: a comparison between machined and laser-treated surfaces.

BACKGROUND: One of the main factors for the osseointegration of dental implants is the development of an adequate soft tissue barrier, mainly composed by collagen, which protects the implant from bacterial development. The structural features of the peri-implant collagen are influenced by the implant components and, in particular, by the type of the surface. In the clinical practice, healing abutments are characterized by smooth surfaces, named machined. Recently, a new laser technique, Synthegra, has been developed to obtain a topography-controlled surface with micrometric regular pores that seems reducing the risk of peri-implantitis. Based on this background, this study aims investigating the structural organization and spatial distribution of collagen surrounding healing abutments characterized by laser-treated and machined surfaces. METHODS: Gingiva portions surrounding custom-made healing abutments (HA), characterized by alternated laser-treated and machined surfaces, were collected and analyzed by combining Fourier Transform InfraRed Imaging (FTIRI) spectroscopy, a non-invasive and high-resolution bidimensional analytical technique, with histological and multivariate analyses. RESULTS: Masson's trichrome staining, specific for collagen, highlighted a massive presence of collagen in all the analyzed samples, evidencing a surface-related spatial distribution. The nature of collagen, investigated by the FTIRI spectroscopy, appeared more abundant close to the laser-treated surface, with a perpendicular disposition of the bundles respect to the HA; conversely, a parallel distribution was observed around the machined surface. A different secondary structure was also found, with a higher amount of triple helices and a lower quantity of random coils in collagen close to the laser treated surfaces. CONCLUSIONS: FTIRI spectroscopy demonstrates that the use of a laser treated transmucosal surface can improve the morphological organization of the peri-implant collagen, which presents a distribution more similar to that of natural teeth. TRIAL REGISTRATION: This trial is registered with ClinicalTrials.gov Identifier: (Registration Number: NCT05754970). Registered 06/03/2023, retrospectively registered, https://clinicaltrials.gov/show/NCT05754970 .

Use of over-the-counter mouthwashes as an additional measure in individual oral prophylaxis on adults with plaque-induced gingivitis: a double-blind, parallel, randomized controlled trial.

BACKGROUND: Plaque-induced gingivitis is a chronic inflammatory condition characterized by complete reversibility of tissue damage once the periodontal biofilm has been disorganised. The aim of this study was to evaluate the efficacy of two commercially available mouthwashes (MWs) versus a chlorhexidine (CHX) 0.12% MW in reducing gingival bleeding (GB) in adults with plaque-induced gingivitis. METHODS: The present study was a double-blind, parallel, randomized controlled trial involving 6492 gingival sites (i.e. 39 subjects × 28 teeth × 6 sites/tooth) aged 18-75 years. During a 2-week period, subjects were randomized to receive MWs: a control CHX 0.12% MW (group C, 1818 sites); a MW test containing CHX 0.09% + Citrox®/P complex (group CX, 2628 sites); a MW test based on natural compounds (group P, 2016 sites). GB was assessed at the inclusion visit (T0) and after 2 weeks of MW use (T1). Analyses of GB were compared between groups and then restricted to subjects with bleeding sites between 10 and 30% (moderate gingivitis) or ≥ 30% (severe gingivitis) at T0. Pairwise comparisons were made between groups and logistic regression was used to identify correlates of GB (T1). RESULTS: For total bleeding site analysis, GB reduction between T0 and T1 ranged from 23% (C), 26% (CX) and 36% (P), respectively (all p < 0.05). Multiple comparison between groups showed that group C was significantly less effective (p < 0.05) than groups CX and P. Splitting the analysis, in patients with severe gingivitis (≥ 30% bleeding sites at T0), all MWs had a positive effect on GB with a reduction at T1 of 36% (C), 33% (CX) and 42% (P), respectively. While GB reduction between T0 and T1, was significant for all groups, the comparison among groups showed no significant difference between group C and CX, whereas the improvement was significant for group P. On the other hand, in adults with moderate gingivitis (< 30% bleeding sites at T0), only CX and P had a positive effect on GB reduction at T1(9% in CX and 2% in P, respectively), although the differences between the three groups were not significant. CONCLUSION: The daily use of MWs with natural components (groups P and CX) for 2 weeks should be considered positively as an adjunct to individual oral prophylaxis to reduce GB compared to the control MW containing CHX 0.12% (group C) in healthy adults with plaque-induced gingivitis. For subjects with severe gingivitis, it is advisable to first use natural MW (P) and then MW based on CHX 0.09% with natural components (CX), compared to MW with CHX 0.12% (C). For adults with moderate gingivitis, P and CX can be advisable, even if no definitive recommendations can be drawn. TRIAL REGISTRATION: ACTRN12622000215729, 07/02/2022.

Multivariate curve Resolution-Alternating least squares coupled with Raman microspectroscopy: new insights into the kinetic response of primary oral squamous carcinoma cells to cisplatin.

Raman MicroSpectroscopy (RMS) is a powerful label-free tool to probe the effects of drugs at a cellular/subcellular level. It is important, however, to be able to extract relevant biochemical and kinetic spectroscopic signatures of the specific cellular responses. In the present study, a combination of Multivariate Curve Resolution-Alternating Least Squares (MCR-ALS) and Principal Component Analysis (PCA) is used to analyse the RMS data for the example of exposure of primary Oral Squamous Carcinoma Cells (OSCC) to the chemotherapeutic agent cisplatin. Dosing regimens were established by cytotoxicity assays, and the effects of the drug on cellular spectral profiles were monitored from 16 to 72 hours post-exposure using an apoptosis assay, to establish the relative populations of viable (V), early (EA) and late apoptotic/dead (LA/D) cells after the drug treatment. Based on a kinetic model of the progression from V > EA > D, MCR-ALS regression analysis of the RMS responses was able to extract spectral profiles associated with each stage of the cellular responses, enabling a quantitative comparison of the response rates for the respective drug treatments. Moreover, PCA was used to compare the spectral profiles of the viable cells exposed to the drug. Spectral differences were highlighted in the early stages (16 hours exposure), indicative of the initial cellular response to the drug treatment, and also in the late stages (48-72 hours exposure), representing the cell death pathway. The study demonstrates that RMS coupled with multivariate analysis can be used to quantitatively monitor the progression of cellular responses to different drugs, towards future applications for label-free, in vitro, pre-clinical screening.

Multidisciplinary evaluation of the remineralization potential of three fluoride-based toothpastes on natural white spot lesions.

OBJECTIVES: This in vitro study aimed assessing the remineralization potential of three commercial fluoride-based toothpastes in permanent teeth with natural white spot lesions (WSLs). A multidisciplinary approach based on Raman microspectroscopy (RMS), Scanning electron microscopy (SEM), Energy-dispersive x-ray spectroscopy (EDS), and Vickers microhardness (VMH) was exploited. METHODS: N = 12 human molars with natural WSLs in the proximal-vestibular zone were selected and divided into 4 groups (n = 3) according to the different treatments: HAF (hydroxyapatite with fluoride ions); SMF (sodium monofluorophosphate with arginine); SF (sodium fluoride with enzymes), and CTRL (untreated group). All toothpastes tested contained 1450 ppm of fluoride. Teeth samples were submitted to the following protocol: a 7-day pH cycling treatment, with two daily exposures (2 min each time) to the commercial toothpastes described above. The surface micromorphology (SEM), the chemical/elemental composition (RMS and EDS), and the Vickers microhardness (VMH) were evaluated. Statistical analysis was performed. RESULTS: A remarkable remineralization of WSLs in SEM images was observed in all treated groups compared to CTRL. In particular, HAF and SF displayed higher values of VMH, phosphates amount (I960), crystallinity (FWHM960), and lower ones of C/P (I1070/I960) with respect to CTRL. Intermediate values were found in SMF, higher than CTRL but lower with respect to HAF and SF. As regards the Ca/P ratio, statistically significant differences (p < 0.05) were found between SF and the other groups. CONCLUSIONS: All the tested dentifrices have shown to remineralize the WSLs. SF and HAF have comparable capability in hardness recovery and crystallinity; however, SF shows the best remineralizing potential according to both micromorphological and chemical analyses. Clinical relevance The daily use of toothpastes containing hydroxyapatite partially replaced with fluoride, sodium monofluorophosphate with arginine and sodium fluoride toothpaste associated with enzymes represents a preventive, therapeutic, effective, and non-invasive tool for remineralize WSLs.

Comparison of two curing protocols during adhesive cementation: can the step luting technique supersede the traditional one?

This study aims to compare the degree of conversion of two different curing protocols used during adhesive cementation. The following resin luting agents were tested: Hri Flow (MF) and pre-heated Hri Micerium (MH); light-cure Nexus Third Generation (NX3L) and dual-cure Nexus Third Generation (NX3D); dual cured RelyX Ultimate (RXU) and light-cure RelyX Veneers (RXL). For each tested material, ten samples were prepared and divided into two groups which had different curing protocols (P1 and P2): in P1, samples were cured for 40 s; in P2, samples were cured for 5 s, and then, after 20 s, cured again for additional 40 s. The degree of conversion (DC) was evaluated both during the first 5 min of the curing phase and after 1, 2, 7, 14 and 28 days (p = 0.05). Different trends were observed in DC values after 5 min by comparing P1 and P2. In both P1 and P2, DC decreased as follows, MH > MF > NX3L > RXL > RXU > NX3D. There were significant differences of DC values among all resin luting agents (p < 0.05) in P1, while no significant differences existed between MH and MF, and NX3L and RXL in P2. At 1, 2, 7, 14 and 28 days the light curing luting agents had a higher DC than the dual luting agents (p < 0.05). P1 and P2 were not statistically different at each time point (p > 0.05). Both P1 and P2 protocols let achieve an acceptable DC after 28 days. The tested P2 can be safely used to lute indirect restorations, simplifying the removal of cement excesses.

Odontoblastic Cell Quantification and Apoptosis within Pulp of Deciduous Teeth Versus Pulp of Permanent Teeth.

OBJECTIVE: While the odontoblast ability to respond to injury in permanent teeth (PT) is well established, there is a lack of knowledge about deciduous teeth (DT). Aim of this study was to compare the odontoblasts activity within the pulp of DT versus the pulp of PT. STUDY DESIGN: Dental pulp was obtained from forty-two DT and twenty-seven PT extracted from sixty-five patients (aged 6-16 years). Histomorphometry was carried out and the quantification of odontoblastic layer was assessed. Dental pulps of DT and PT were stained for anti-ssDNA, BCL-2, BCL-x, BAX, caspase3. RESULTS: Pulps from DT were characterized by reduction of odontoblastic layer and greater occurrence of apoptotic odontoblasts. Pro-apoptotic BAX phenotype expression on odontoblasts correlated with the occurrence of numerous activated caspase3 odontoblasts in DT. The number of BAX positive cells was significantly higher compared to BCL-2 positive cells in the odontoblastic layer of the DT (p=0.03). Since BAX and BCL-2 proteins have an inverse role in the regulation of the apoptosis, this finding suggests that odontoblasts have a predominant pro-apoptotic phenotype in DT. CONCLUSION: According to our results, the odontoblasts of DT can be assumed to have a lower reparative activity if compared to odontoblasts of PT.

Non-Cariogenic Effect of Milk and Dairy Products on Oral Health in Children and Adolescents: A Scoping Review.

Diet plays an important role in the etiopathology of dental caries. Milk and dairy products (DPs), especially in children and adolescents, are important sources of protein, calcium and phosphorus and could have an effect on dental and oral health. The aim of this scoping review was to analyze the scientific literature on the non-cariogenic effect of milk and DPs, with a focus on their potential to prevent dental caries in children and adolescents. PubMed, EMBASE, and Web of Science were searched for publications relevant to our topic from January 2013 to 30 September 2023. Thirty-eight studies were included in the qualitative analysis. The included studies highlight the properties of milk and DPs that contribute to enamel remineralization, exhibit antibacterial action, inhibit the growth of cariogenic bacteria, and promote a balanced oral microbiome. With regard to the addition of probiotics (PBs) and fluoride (F) to DPs, the mixed results of the studies analyzed did not allow a clear statement to be made about their non-cariogenic effects. However, several studies show that the addition of PBs can reduce cariogenic bacteria, create a protective barrier against pathogens and support the host's natural defense mechanisms. Further long-term and high-quality studies are needed to understand the impact of milk and its constituents on oral health in order to promote effective caries prevention strategies in children and adolescents.

A Modern Multidisciplinary Method to Characterize Natural White Spot Lesions with 2D and 3D Assessments: A Preliminary Study.

In this preliminary study, a multidisciplinary method based on high-resolution analytical techniques (such as microcomputed tomography, Raman Microspectroscopy, scanning electron microscopy, and Vickers microhardness test) was exploited to evaluate the alterations that occur in human teeth at the initial stage of the carious lesion. To this purpose, six extracted molars displaying a natural white spot lesion (WSL) were investigated. Specific morphological, structural, and chemical parameters, such as the mineral density, indentation hardness, molecular and elemental composition, and surface micromorphology were obtained on the WSL, and the results were statistically compared (t-test, p < 0.05) to those of the sound enamel on the same tooth. In the WSL, with respect to the sound area, a decrease in the mineral density and crystallinity was detected together with differences in the molecular composition and surface microstructure, such as the occurrence of micropores and irregularities. Moreover, the elemental analysis highlighted in WSL showed a statistically significant decrease in Ca and P percentages. In conclusion, this multidisciplinary approach allows us to fully characterize the area of interest, providing a deeper knowledge of these enamel lesions, which could have important clinical implications.

A spectroscopic study on orthodontic aligners: First evidence of secondary microplastic detachment after seven days of artificial saliva exposure.

Clear orthodontic aligners have recently seen increasing popularity. The thermoplastic materials present several advantages, even if it is known that all plastic products can be subjected to environmental and mechanical degradation, leading to the release of microplastics (MPs). Their ingestion could cause oxidative stress and inflammatory lesions. This study aims to evaluate the potential detachment of MPs by clear aligners due to mechanical friction simulated with a 7-day protocol in artificial saliva. The study was performed on orthodontic clear aligners from different manufacturers: Alleo (AL); FlexiLigner (FL); F22 Aligner (F22); Invisalign® (INV); Lineo (LIN); Arc Angel (ARC), and Ortobel Aligner (OR). For each group, two aligners were immersed in artificial saliva for 7 days and stirred for 5 h/day, simulating the physiological teeth mechanical friction. After 7 days, the artificial saliva was filtered; then, filters were analyzed by Raman Microspectroscopy (RMS) and Scanning Electron Microscopy (SEM), respectively to chemically identify the polymeric matrix and to measure the number and size of the detected MPs. RMS spectra revealed that AL, FL, LIN, ARC, and OR aligners were composed by polyethylene terephthalate, while F22 and INV ones by polyurethane. SEM analysis showed that the highest number of MPs was found in ARC and the lowest in INV (p < 0.05). As regards MPs' size, no statistically significant difference was found among groups, with most MPs ranging from 5 to 20 µm. Noteworthy, a highly significant correlation (p < 0.0001) was highlighted between the distribution of MPs size and the different typologies of aligners. This in vitro study highlighted for the first time the detachment of MPs from clear aligners due to mechanical friction. This evidence may represent a great concern in the clinical practice since it could impact human general health.

Prevalence, Severity of Extension, and Risk Factors of Gingivitis in a 3-Month Pregnant Population: A Multicenter Cross-Sectional Study.

The scope of this study was to assess the prevalence, severity of extension, and risk factors of gingivitis among pregnant women. In this cross-sectional study, 220 nulliparous women at 3 months of pregnancy were recruited in 2022 at the first obstetrical visit in Dakar, Senegal. Demographic characteristics, lifestyle habits, prenatal clinical status, and oral clinical parameters were recorded. Multivariable logistic regression modeling was used to assess relationships between gingivitis and risk factors. Eighty-eight percent of women had gingivitis, 15% were classified as moderate and 73% as severe. A total of 66.7% (95% CI [28.8-92.1]) of the sites had bleeding on interdental brushing. The odds for gingivitis decreased significantly for women consuming more than five portions of fruits and vegetables per day (OR = 0.15; 95% CI [0.03-0.66]) and increased in women who had a professional activity (OR = 6.75; 95% CI [1.27-35.87]) and high education. Concomitantly, the percentage of dental plaque (OR = 131.6; 95% CI [10.80-1619.71] and the severity of clinical attachment loss (OR = 7.70; 95% CI [3.16-18.92]) were important risk factors. Inverse associations were observed with increasing body mass index (OR = 0.76; 95% CI [0.63-0.93]). Our results underline that gingivitis cases and bleeding were particularly high among 3-month pregnant women. Literacy and adequate oral hygiene actions to modify behaviors and to achieve meticulous biofilm disorganization could make a favorable change in the gingival health outcome. Additionally, further research is necessary to precisely determine the role of biofilm-induced gingivitis and systemic-induced gingivitis in improving gingival conditions.

Assessment of the Remineralizing Potential of Biomimetic Materials on Early Artificial Caries Lesions after 28 Days: An In Vitro Study.

This study aimed to evaluate the loss of mineral content in the enamel surface in early artificial lesions and to assess the remineralizing potential of different agents by means of SEM coupled with energy-dispersive X-ray analysis (EDX). The analysis was performed on the enamel of 36 molars divided into six equal groups, in which the experimental ones (3-6) were treated using remineralizing agents for a 28-day pH cycling protocol as follows: Group 1, sound enamel; Group 2, artificially demineralized enamel; Group 3, CPP-ACP treatment; Group 4, Zn-hydroxyapatite treatment; Group 5, NaF 5% treatment; and Group 6, F-ACP treatment. Surface morphologies and alterations in Ca/P ratio were evaluated using SEM-EDX and data underwent statistical analysis (p < 0.05). Compared with the sound enamel of Group 1, the SEM images of Group 2 clearly showed loss of integrity, minerals, and interprismatic substances. Groups 3-6 showed a structural reorganization of enamel prisms, interestingly comprising almost the entire enamel surface. Group 2 revealed highly significant differences of Ca/P ratios compared with other groups, while Groups 3-6 showed no differences with Group 1. In conclusion, all tested materials demonstrated a biomimetic ability in remineralizing lesions after 28 days of treatment.

Micro-computed tomography for assessing the internal and external voids of bulk-fill composite restorations: A technical report.

Purpose: This technical report aims to describe and detail the use of micro-computed tomography for a reliable evaluation of the bulk-fill composite/tooth interface. Materials and Methods: Bulk-fill composite restorations in tooth cavities were scanned using micro-computed tomography to obtain qualitatively and quantitatively valuable information. Two-dimensional information was processed using specific algorithms, and ultimately a 3-dimensional (3D) specimen reconstruction was generated. The 3D rendering allowed the visualization of voids inside bulk-fill composite materials and provided quantitative measurements. The 3D analysis software VG Studio MAX was used to perform image analysis and assess gap formation within the tooth-restoration interface. In particular, to evaluate internal adaptation, the Defect Analysis add-on module of VG Studio Max was used. Results: The data, obtained with the processing software, highlighted the presence and the shape of gaps in different colours, representing the volume of porosity within a chromatic scale in which each colour quantitatively represents a well-defined volume. Conclusion: Micro-computed tomography makes it possible to obtain several quantitative parameters, providing fundamental information on defect shape and complexity. However, this technique has the limit of not discriminating materials without radiopacity and with low or no filler content, such as dental adhesives, and hence, they are difficult to visualise through software reconstruction.

Advances in diastema closure and tooth shape change using direct composite restorations: the Front Wing Technique.

Closing a diastema with a direct composite restoration still represents a real challenge for clinicians, mainly due to the need to create a correct contact point and emergence profile at the cervical level. The present article describes a novel anterior direct composite restoration technique for closing diastemata and changing tooth shape. The proposed technique, called the Front Wing Technique (FWT), does away with the use of the traditional wax-up and silicone index-based procedures. To date, there has been no effective way to transfer the anatomy modeled in the wax to the interproximal cervical area of anterior restorations every time these areas need to be corrected or restored. Therefore, the FWT provides a new approach to freehand model the emergence profile without gap formation. The cases in this article demonstrate the closure of maxillary and mandibular incisal diastemata, with the rationale behind each clinical step of the FWT described. This technique should be considered an alternative approach for the direct composite restoration of anterior teeth, saving chair time and cost.

Remineralization Efficacy of Four Remineralizing Agents on Artificial Enamel Lesions: SEM-EDS Investigation.

Dental remineralization represents the process of depositing calcium and phosphate ions into crystal voids in demineralized enamel, producing net mineral gain and preventing early enamel lesions progression. The aim of the present study was to qualitatively and quantitatively compare the remineralizing effectiveness of four commercially available agents on enamel artificial lesions using Scanning Electron Microscopy (SEM) combined with Energy Dispersive Spectroscopy (EDS) techniques. Thirty-six extracted third molars were collected and randomly assigned to six groups (n = 6), five of which were suspended in demineralizing solution for 72 h to create enamel artificial lesions, and one serving as control: G1, treated with a mousse of casein phosphopeptide and amorphous calcium−phosphate (CPP-ACP); G2, treated with a gel containing nano-hydroxyapatite; G3, treated with a 5% SF varnish; G4, treated with a toothpaste containing ACP functionalized with fluoride and carbonate-coated with citrate; G5, not-treated artificial enamel lesions; G6, not demineralized and not treated sound enamel. G1−G4 were subjected to pH cycling over a period of seven days. Analyses of the specimens' enamel surfaces morphology were performed by SEM and EDS. Data were statistically analyzed for multiple group comparison by one-way ANOVA/Tukey's test (p < 0.05). The results show that the Ca/P ratio of the G5 (2.00 ± 0.07) was statistically different (p < 0.05) from G1 (1.73 ± 0.05), G2 (1.76 ± 0.01), G3 (1.88 ± 0.06) and G6 (1.74 ± 0.04), while there were no differences (p > 0.05) between G1, G2 and G6 and between G4 (2.01 ± 0.06) and G5. We concluded that G1 and G2 showed better surface remineralization than G3 and G4, after 7 days of treatment.

Surface evaluations of a nanocomposite after different finishing and polishing systems for anterior and posterior restorations.

This study aims to evaluate the effects of different finishing and polishing (F/P) systems on gloss and surface morphology of a new nanocomposite. Thirty discs of Filtek Universal Restorative material (3 M, ESPE) were prepared and divided into six groups (n = 5). Group A and B followed F/P protocols for anterior restorations, whereas Group C and D for posterior ones. Group E represented the control (covered by Mylar strip) and Group F represented the nanocomposite placement by means of clinical hand instruments; Groups E and F did not undergo F/P procedures. Among the polished groups, Group B showed the highest values (68.54 ± 7.54 GU), followed by Group A and D (46.87 ± 5.52 GU; 53.76 ± 2.65 GU). Finally, Group C (37.38 ± 4.93 GU) displayed the lowest results. Overall, Group E showed the highest gloss values (93.45 ± 8.27 GU), while Group F presented the lowest ones (1.74 ± 0.64 GU). Surface analysis revealed that Group A, C, and D displayed a smooth surface. Group B showed the lowest irregularities. Group E exhibited the most uniform superficial morphology. On the other hand, Group F displayed the most irregular one. In conclusion, using the tested material, only two protocols achieved appropriate gloss values. Then, clinicians might use the protocols of Group B and Group D, for anterior and posterior restorations, respectively.

A Comparative Evaluation of Nanohydroxyapatite-Enriched Hydrogen Peroxide Home Bleaching System on Color, Hardness and Microstructure of Dental Enamel.

This study aimed to evaluate two hydrogen peroxide (HP)-based at-home bleaching systems in order to analyze whether nano-hydroxyapatite (nHA) addition may represent a reliable and safe solution for tooth whitening without altering dental microstructure and hardness. Human third molars (N = 15) were treated with two bleaching agents, one containing 6%HP (6HP) and the other 6% HP nHA-enriched (6HP-nHA) with average particle diameter ranging from 5-20 nm. Their effects on enamel were assessed using a spectrophotometer, Vickers microhardness (VMH) test and Scanning Electron Microscopy (SEM), comparing the treated groups with the non-treated control group (CTR). Color analysis revealed improvement in whiteness in both groups compared to CTR. VMH test results showed no differences among the groups. SEM analysis highlighted no evident changes in the enamel microstructure of tested groups compared to CTR. At high magnification, in 6HP group, a slight increase in irregularities of enamel surface morphology was observed, while 6HP-nHA group displayed removal of the aprismatic layer but preservation of the intact prismatic structure. These results suggest that the 6HP-nHA agent may be recommended to provide reliable whitening treatment, without damaging the enamel micromorphology and hardness.

Efficacy of personal protective equipment against coronavirus transmission via dental handpieces.

BACKGROUND: This laboratory study was done to evaluate the efficacy of personal protective equipment (PPE) and high-volume evacuation (HVE) against the spread of human coronavirus type 229E (HCoV-229E) during a standard dental procedure. METHODS: Patient and operator manikins were used to recreate a dental setting inside a custom-built class III cabinet-like chamber. The mouth of the patient manikin was inoculated with an HCoV-229E suspension, the viral load of which was similar to that of asymptomatic people infected with severe acute respiratory syndrome coronavirus 2. The dental procedure was performed with an air turbine handpiece and HVE for 10 seconds. The efficacy of surgical masks, N95 (filtering facepiece class 2) and filtering facepiece class 3 respirators, and face shields was tested via quantitative real-time polymerase chain reaction. RESULTS: The wide surface on which the inoculum was spread caused low contamination. Over the external surfaces of masks and respirators, when a face shield was not worn, viral loads ranged from 1.2 through 1.4 log10 mean gene copies per cm2. When the shield was worn, viral loads dropped below the detection limit (< 0.317 log10 gene copies/cm2) for all PPE. On the operator's forehead, viral loads were 0.6 through 0.8 log10 gene copies/cm2. Inside the operator manikin's mouth, viral loads were under the detection limit when using any PPE, with or without the shield. HVE did not significantly change viral loads. CONCLUSIONS: All PPE combinations significantly reduced viral loads in the operator manikin's mouth to below the detection limit, but HVE did not decrease viral contamination. PRACTICAL IMPLICATIONS: Although caution is suggested when removing and disposing of PPE to avoid self-contamination, the combination of PPE and face shields drastically decreases the risk of transmitting human coronavirus during aerosol-generating dental procedures.

Aerosols modification with H2O2 reduces airborne contamination by dental handpieces.

Objective: We designed an in vitro study to evaluate the efficiency of an 0.5 vol% hydrogen peroxide-based spray in reducing Coronavirus 229E spread during a conventional dental procedure. Methods: A class III cabinet-like chamber was custom-built, using phantoms for both patient and operator. A suspension of HCoV-229E in artificial saliva having a similar viral load to SARS-CoV-2 asymptomatic patients was inoculated inside the patient's phantom mouth. A 10 s-lasting dental procedure was performed using an aerosol-generating air-turbine, with or without high-volume evacuation (HVE). The effect of 0.5 vol% H2O2 cooling spray in reducing viral loads was tested. Viral presence on the operator phantom was assessed by Real-Time quantitative PCR on the mask's outer surface, on the phantom's forehead, and inside its mouth. Results: When the H2O2 cooling spray was used, as compared to the conventional spray, viral loads were significantly lower on all tested sites, falling below the detection limit. Viral loads did not significantly change in any tested site when HVE was used. Conclusion: The use of 0.5 vol% H2O2 cooling spray by dental handpieces drastically reduced the possibility of coronaviruses spread during aerosol-generating dental procedures. This strategy deserves further consideration among the preventive measures to be adopted during the SARS-CoV-2 pandemic.

ATR-FTIR, EDS and SEM evaluations of enamel structure after treatment with hydrogen peroxide bleaching agents loaded with nano-hydroxyapatite particles.

BACKGROUND: Tooth whitening is one of the most requested dental treatments, but it still presents some side effects. Indeed, the bleaching agent can generate patients' discomfort and dental hard tissue damages, not achieving an efficient and long-lasting treatment with optimum whitening effect. To overcome these limitations, the bleaching agents containing nano-hydroxyapatite can represent a reliable solution to avoid these detrimental effects. METHODS: In this study, human third molars were treated with commercial bleaching agents, containing nano-hydroxyapatite (nHA) and 6% (at-home treatment), 12% and 18% (in-office treatments) of hydrogen peroxide (HP), named respectively G1, G2 and G3. The results were evaluated descriptively and analytically using Attenuated Total Reflectance-Fourier Transform Infrared Spectroscopy (ATR-FTIR), Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray spectroscopy (EDS), comparing the treated groups with a commercial gel containing 10% carbamide peroxide (CONV) and with a non-treated control group (CTRL). RESULTS: ATR-FTIR analysis revealed a similar composition in carbonates and phosphates for CTRL, G1 and G2 groups, which showed no significant differences in their spectral profiles; an increased amount of organic matter was found in G3, while CONV displayed an intermediate behavior. SEM analysis did not highlight significant changes in the enamel microstructure of G1 and CONV when compared to CTRL; the pattern observed in G2 presented a slight increase of enamel irregularities, while G3 displayed a partial removal of the aprismatic layer and microporosities. No evident effects due to nHA were observed in the structure of the hydroxyapatite component of G1, G2 and CONV, if compared to CTRL, while G3 showed a slight loss of crystallinity. In all groups, EDS identified slight changes in the concentration of chemical elements O and Ca, while the Ca/P ratio was similar when compared to CTRL. CONCLUSION: The obtained results suggest that the application of the tested commercial bleaching agents, with a concentration of HP up to 12%, does not alter the morphological and chemical composition of the enamel surface and maintains its crystallinity.