Probing structure and function of ion channels using limited proteolysis and microfluidics.

Even though gain, loss, or modulation of ion channel function is implicated in many diseases, both rare and common, the development of new pharmaceuticals targeting this class has been disappointing, where it has been a major problem to obtain correlated structural and functional information. Here, we present a microfluidic method in which the ion channel TRPV1, contained in proteoliposomes or in excised patches, was exposed to limited trypsin proteolysis. Cleaved-off peptides were identified by MS, and electrophysiological properties were recorded by patch clamp. Thus, the structure-function relationship was evaluated by correlating changes in function with removal of structural elements. Using this approach, we pinpointed regions of TRPV1 that affect channel properties upon their removal, causing changes in current amplitude, single-channel conductance, and EC50 value toward its agonist, capsaicin. We have provided a fast "shotgun" method for chemical truncation of a membrane protein, which allows for functional assessments of various peptide regions.

Novel druggable space in human KRAS G13D discovered using structural bioinformatics and a P-loop targeting monoclonal antibody.

KRAS belongs to a family of small GTPases that act as binary switches upstream of several signalling cascades, controlling proliferation and survival of cells. Mutations in KRAS drive oncogenesis, especially in pancreatic, lung, and colorectal cancers (CRC). Although historic attempts at targeting mutant KRAS with small molecule inhibitors have proven challenging, there are recent successes with the G12C, and G12D mutations. However, clinically important RAS mutations such as G12V, G13D, Q61L, and A146T, remain elusive drug targets, and insights to their structural landscape is of critical importance to develop novel, and effective therapeutic concepts. We present a fully open, P-loop exposing conformer of KRAS G13D by X-ray crystallography at 1.4-2.4 Å resolution in Mg2+-free phosphate and malonate buffers. The G13D conformer has the switch-I region displaced in an upright position leaving the catalytic core fully exposed. To prove that this state is druggable, we developed a P-loop-targeting monoclonal antibody (mAb). The mAb displayed high-affinity binding to G13D and was shown using high resolution fluorescence microscopy to be spontaneously taken up by G13D-mutated HCT 116 cells (human CRC derived) by macropinocytosis. The mAb inhibited KRAS signalling in phosphoproteomic and genomic studies. Taken together, the data propose novel druggable space of G13D that is reachable in the cellular context. It is our hope that these findings will stimulate attempts to drug this fully open state G13D conformer using mAbs or other modalities.

Effect of cholesterol depletion on the pore dilation of TRPV1.

The TRPV1 ion channel is expressed in nociceptors, where pharmacological modulation of its function may offer a means of alleviating pain and neurogenic inflammation processes in the human body. The aim of this study was to investigate the effects of cholesterol depletion of the cell on ion-permeability of the TRPV1 ion channel. The ion-permeability properties of TRPV1 were assessed using whole-cell patch-clamp and YO-PRO uptake rate studies on a Chinese hamster ovary (CHO) cell line expressing this ion channel. Prolonged capsaicin-induced activation of TRPV1 with N-methyl-D-glucamine (NMDG) as the sole extracellular cation, generated a biphasic current which included an initial outward current followed by an inward current. Similarly, prolonged proton-activation (pH 5.5) of TRPV1 under hypocalcemic conditions also generated a biphasic current including a fast initial current peak followed by a larger second one. Patch-clamp recordings of reversal potentials of TRPV1 revealed an increase of the ion-permeability for NMDG during prolonged activation of this ion channel under hypocalcemic conditions. Our findings show that cholesterol depletion inhibited both the second current, and the increase in ion-permeability of the TRPV1 channel, resulting from sustained agonist-activation with capsaicin and protons (pH 5.5). These results were confirmed with YO-PRO uptake rate studies using laser scanning confocal microscopy, where cholesterol depletion was found to decrease TRPV1 mediated uptake rates of YO-PRO. Hence, these results propose a novel mechanism by which cellular cholesterol depletion modulates the function of TRPV1, which may constitute a novel approach for treatment of neurogenic pain.

Probing enzymatic activity inside single cells.

We report a novel approach for determining the enzymatic activity within a single suspended cell. Using a steady-state microfluidic delivery device and timed exposure to the pore-forming agent digitonin, we controlled the plasma membrane permeation of individual NG108-15 cells. Mildly permeabilized cells (~100 pores) were exposed to a series of concentrations of fluorescein diphosphate (FDP), a fluorogenic alkaline phosphatase substrate, with and without levamisole, an alkaline phosphatase inhibitor. We generated quantitative estimates for intracellular enzyme activity and were able to construct both dose-response and dose-inhibition curves at the single-cell level, resulting in an apparent Michaelis contant Km of 15.3 µM ± 1.02 (mean ± standard error of the mean (SEM), n = 16) and an inhibition constant Ki of 0.59 mM ± 0.07 (mean ± SEM, n = 14). Enzymatic activity could be monitored just 40 s after permeabilization, and five point dose-inhibition curves could be obtained within 150 s. This rapid approach offers a new methodology for characterizing enzyme activity within single cells.

Radial sizing of lipid nanotubes using membrane displacement analysis.

We report a novel method for the measurement of lipid nanotube radii. Membrane translocation is monitored between two nanotube-connected vesicles, during the expansion of a receiving vesicle, by observing a photobleached region of the nanotube. We elucidate nanotube radii, extracted from SPE vesicles, enabling quantification of membrane composition and lamellarity. Variances of nanotube radii were measured, showing a growth of 40-56 nm, upon increasing cholesterol content from 0 to 20%.

Microfluidic flow cell for sequential digestion of immobilized proteoliposomes.

We have developed a microfluidic flow cell where stepwise enzymatic digestion is performed on immobilized proteoliposomes and the resulting cleaved peptides are analyzed with liquid chromatography-tandem mass spectrometry (LC-MS/MS). The flow cell channels consist of two parallel gold surfaces mounted face to face with a thin spacer and feature an inlet and an outlet port. Proteoliposomes (50-150 nm in diameter) obtained from red blood cells (RBC), or Chinese hamster ovary (CHO) cells, were immobilized on the inside of the flow cell channel, thus forming a stationary phase of proteoliposomes. The rate of proteoliposome immobilization was determined using a quartz crystal microbalance with dissipation monitoring (QCM-D) which showed that 95% of the proteoliposomes bind within 5 min. The flow cell was found to bind a maximum of 1 µg proteoliposomes/cm(2), and a minimum proteoliposome concentration required for saturation of the flow cell was determined to be 500 µg/mL. Atomic force microscopy (AFM) studies showed an even distribution of immobilized proteoliposomes on the surface. The liquid encapsulated between the surfaces has a large surface-to-volume ratio, providing rapid material transfer rates between the liquid phase and the stationary phase. We characterized the hydrodynamic properties of the flow cell, and the force acting on the proteoliposomes during flow cell operation was estimated to be in the range of 0.1-1 pN, too small to cause any proteoliposome deformation or rupture. A sequential proteolytic protocol, repeatedly exposing proteoliposomes to a digestive enzyme, trypsin, was developed and compared with a single-digest protocol. The sequential protocol was found to detect ~65% more unique membrane-associated protein (p < 0.001, n = 6) based on peptide analysis with LC-MS/MS, compared to a single-digest protocol. Thus, the flow cell described herein is a suitable tool for shotgun proteomics on proteoliposomes, enabling more detailed characterization of complex protein samples.

High-resolution micropatterned Teflon AF substrates for biocompatible nanofluidic devices.

We describe a general photolithography-based process for the microfabrication of surface-supported Teflon AF structures. Teflon AF patterns primarily benefit from superior optical properties such as very low autofluorescence and a low refractive index. The process ensures that the Teflon AF patterns remain strongly hydrophobic in order to allow rapid lipid monolayer spreading and generates a characteristic edge morphology which assists directed cell growth along the structured surfaces. We provide application examples, demonstrating the well-controlled mixing of lipid films on Teflon AF structures and showing how the patterned surfaces can be used as biocompatible growth-directing substrates for cell culture. Chinese hamster ovary (CHO) cells develop in a guided fashion along the sides of the microstructures, selectively avoiding to grow over the patterned areas.

Membrane protrusion coarsening and nanotubulation within giant unilamellar vesicles.

Hydrophobic side groups on a stimuli-responsive polymer, encapsulated within a single giant unilamellar vesicle, enable membrane attachment during compartment formation at elevated temperatures. We thermally modulated the vesicle through implementation of an IR laser via an optical fiber, enabling localized directed heating. Polymer-membrane interactions were monitored using confocal imaging techniques as subsequent membrane protrusions occurred and lipid nanotubes formed in response to the polymer hydrogel contraction. These nanotubes, bridging the vesicle membrane to the contracting hydrogel, were retained on the surface of the polymer compartment, where they were transformed into smaller vesicles in a process reminiscent of cellular endocytosis. This development of a synthetic vesicle system containing a stimuli-responsive polymer could lead to a new platform for studying inter/intramembrane transport through lipid nanotubes.

Fractal avalanche ruptures in biological membranes.

Bilayer membranes envelope cells as well as organelles, and constitute the most ubiquitous biological material found in all branches of the phylogenetic tree. Cell membrane rupture is an important biological process, and substantial rupture rates are found in skeletal and cardiac muscle cells under a mechanical load. Rupture can also be induced by processes such as cell death, and active cell membrane repair mechanisms are essential to preserve cell integrity. Pore formation in cell membranes is also at the heart of many biomedical applications such as in drug, gene and short interfering RNA delivery. Membrane rupture dynamics has been studied in bilayer vesicles under tensile stress, which consistently produce circular pores. We observed very different rupture mechanics in bilayer membranes spreading on solid supports: in one instance fingering instabilities were seen resulting in floral-like pores and in another, the rupture proceeded in a series of rapid avalanches causing fractal membrane fragmentation. The intermittent character of rupture evolution and the broad distribution in avalanche sizes is consistent with crackling-noise dynamics. Such noisy dynamics appear in fracture of solid disordered materials, in dislocation avalanches in plastic deformations and domain wall magnetization avalanches. We also observed similar fractal rupture mechanics in spreading cell membranes.

Rational antibody design for undruggable targets using kinetically controlled biomolecular probes.

Several important drug targets, e.g., ion channels and G protein-coupled receptors, are extremely difficult to approach with current antibody technologies. To address these targets classes, we explored kinetically controlled proteases as structural dynamics-sensitive druggability probes in native-state and disease-relevant proteins. By using low-Reynolds number flows, such that a single or a few protease incisions are made, we could identify antibody binding sites (epitopes) that were translated into short-sequence antigens for antibody production. We obtained molecular-level information of the epitope-paratope region and could produce high-affinity antibodies with programmed pharmacological function against difficult-to-drug targets. We demonstrate the first stimulus-selective monoclonal antibodies targeting the transient receptor potential vanilloid 1 (TRPV1) channel, a clinically validated pain target widely considered undruggable with antibodies, and apoptosis-inducing antibodies selectively mediating cytotoxicity in KRAS-mutated cells. It is our hope that this platform will widen the scope of antibody therapeutics for the benefit of patients.

A giant liposome for single-molecule observation of conformational changes in membrane proteins.

We present an experimental system that allows visualization of conformational changes in membrane proteins at the single-molecule level. The target membrane protein is reconstituted in a giant liposome for independent control of the aqueous environments on the two sides of the membrane. For direct observation of conformational changes, an extra-liposomal site(s) of the target protein is bound to a glass surface, and a probe that is easily visible under a microscope, such as a micron-sized plastic bead, is attached to another site on the intra-liposomal side. A conformational change, or an angular motion in the tiny protein molecule, would manifest as a visible motion of the probe. The attachment of the protein on the glass surface also immobilizes the liposome, greatly facilitating its manipulation such as the probe injection. As a model system, we reconstituted ATP synthase (F(O)F(1)) in liposomes tens of mum in size, attached the protein specifically to a glass surface, and demonstrated its ATP-driven rotation in the membrane through the motion of a submicron bead.

A microfluidic pipette for single-cell pharmacology.

We report on a free-standing microfluidic pipette made in poly(dimethylsiloxane) having a circulating liquid tip that generates a self-confining volume in front of the outlet channels. The method is flexible and scalable as the geometry and the size of the recirculation zone is defined by pressure, channel number, and geometry. The pipette is capable of carrying out a variety of complex fluid processing operations, such as mixing, multiplexing, or gradient generation at selected cells in cell and tissue cultures. Using an uptake assay, we show that it is possible to generate dose-response curves in situ from adherent Chinese hamster ovary cells expressing proton-activated human transient receptor potential vanilloid (hTRPV1) receptors. Using confined superfusion and cell stimulation, we could activate hTRPV1 receptors in single cells, measure the response by a patch-clamp pipette, and induce membrane bleb formation by exposing selected groups of cells to formaldehyde/dithiothreitol-containing solutions, respectively. In short, the microfluidic pipette allows for complex, contamination-free multiple-compound delivery for pharmacological screening of intact adherent cells.

A method for heat-stimulated compression of poly(N-isopropyl acrylamide) hydrogels inside single giant unilamellar vesicles.

In this letter, a hydrogel compression method for the facile generation of high polymer concentration within single giant unilamelar vesicles (GUV) is presented. A GUV with an internalized poly(N-isopropyl acrylamide) solution is heated above the lower critical solution temperature (LCST) until compartmentalization by collapsed hydrogel microaggregates occurs. Subsequently, the volume of the vesicle is decreased by reducing the area of the enclosing membrane. An increase in concentration by a factor of up to 11 is reached while the membrane remains intact, bringing the model system close to the living cell situation with its high concentration of proteins in the cytoplasm. The polymer-filled vesicles are also in a suitable density range to significantly improve the flow control performance of hydrogel valves embedded in soft matter nanofluidic devices.

Single-cell electroporation.

Single-cell electroporation (SCEP) is a relatively new technique that has emerged in the last decade or so for single-cell studies. When a large enough electric field is applied to a single cell, transient nano-pores form in the cell membrane allowing molecules to be transported into and out of the cell. Unlike bulk electroporation, in which a homogenous electric field is applied to a suspension of cells, in SCEP an electric field is created locally near a single cell. Today, single-cell-level studies are at the frontier of biochemical research, and SCEP is a promising tool in such studies. In this review, we discuss pore formation based on theoretical and experimental approaches. Current SCEP techniques using microelectrodes, micropipettes, electrolyte-filled capillaries, and microfabricated devices are all thoroughly discussed for adherent and suspended cells. SCEP has been applied in in-vivo and in-vitro studies for delivery of cell-impermeant molecules such as drugs, DNA, and siRNA, and for morphological observations.

Platform for controlled supramolecular nanoassembly.

We here present a two-dimensional (2D) micro/nano-fluidic technique where reactant-doped liquid-crystal films spread and mix on micro- and nanopatterned substrates. Surface-supported phospholipid monolayers are individually doped with complementary DNA molecules which hybridize when these lipid films mix. Using lipid films to convey reactants reduces the dimensionality of traditional 3D chemistry to 2D, and possibly to 1D by confining the lipid film to nanometer-sized lanes. The hybridization event was observed by FRET using single-molecule-sensitive confocal fluorescence detection. We could successfully detect hybridization in lipid streams on 250 nm wide lanes. Our results show that the number and density of reactants as well as sequence of reactant addition can be controlled within confined liquid crystal films, providing a platform for nanochemistry with potential for kinetic control.

3D micro-organisation printing of mammalian cells to generate biological tissues.

Significant strides have been made in the development of in vitro systems for disease modelling. However, the requirement of microenvironment control has placed limitations on the generation of relevant models. Herein, we present a biological tissue printing approach that employs open-volume microfluidics to position individual cells in complex 2D and 3D patterns, as well as in single cell arrays. The variety of bioprinted cell types employed, including skin epithelial (HaCaT), skin cancer (A431), liver cancer (Hep G2), and fibroblast (3T3-J2) cells, all of which exhibited excellent viability and survivability, allowing printed structures to rapidly develop into confluent tissues. To demonstrate a simple 2D oncology model, A431 and HaCaT cells were printed and grown into tissues. Furthermore, a basic skin model was established to probe drug response. 3D tissue formation was demonstrated by co-printing Hep G2 and 3T3-J2 cells onto an established fibroblast layer, the functionality of which was probed by measuring albumin production, and was found to be higher in comparison to both 2D and monoculture approaches. Bioprinting of primary cells was tested using acutely isolated primary rat dorsal root ganglia neurons, which survived and established processes. The presented technique offers a novel open-volume microfluidics approach to bioprint cells for the generation of biological tissues.

A microfluidic diluter based on pulse width flow modulation.

We demonstrate that pulse width flow modulation (PWFM) can be used to design fast, accurate, and precise multistage dilution modules for microfluidic devices. The PWFM stage unit presented here yields 10-fold dilution, but several PWFM stages can be connected in series to yield higher-order dilutions. We have combined two stages in a device thus capable of diluting up to 100-fold, and we have experimentally determined a set of rules that can be conveniently utilized to design multistage diluters. Microfabrication with resist-based molds yielded geometrical channel height variances of 7% (22.9(16) microm) with corresponding hydraulic resistance variances of approximately 20%. Pulsing frequencies, channel lengths, and flow pressures can be chosen within a wide range to establish the desired diluter properties. Finally, we illustrate the benefits of on-chip dilution in an example application where we investigate the effect of the Ca(2+) concentration on a phospholipid bilayer spreading from a membrane reservoir onto a SiO(2) surface. This is one of many possible applications where flexible concentration control is desirable.

Single-cell transfection by electroporation using an electrolyte/plasmid-filled capillary.

Single-cell transfection of adherent cells has been accomplished using single-cell electroporation (SCEP) with a pulled capillary. HEPES-buffered physiological saline solution containing pEGFP plasmid at a low concentration (0.16 approximately 0.78 microg/microL) filled a 15 cm long capillary with a tip opening of 2 microm. The electric field is applied to individual cells by bringing the tip close to the cell and subsequently applying one or two brief electric pulses. Many individual cells can thus be transfected with a small volume of plasmid-containing solution (approximately 1 microL). The extent of electroporation is determined by measuring the percentage loss of freely diffusing thiols (chiefly reduced glutathione) that have been derivatized with the fluorogenic ThioGlo 1. A mass transport model is used to fit the time-dependent fluorescence intensity decay in the target cells. The fits, which are excellent, yield the electroporation-induced fluorescence loss at steady state and the mass transfer rate through the electroporated cell membrane. Steady-state fluorescence loss ranged approximately from 0 to about 80% (based on the fluorescence intensity before electroporation). For the cells having a loss of thiol-ThioGlo 1 fluorescence intensity greater than 10% and mass transfer rate greater than 0.03 s(-1), EGFP fluorescence is observed after 24 h. The EGFP fluorescence is increased at 48 h. With a loss smaller than 10% and a mass transfer rate smaller than 0.03 s(-1), no EGFP fluorescence is detected. Thus, transfection success is closely related to the small molecule mass transport dynamics as indicated by the loss of fluorescence from thiol-ThioGlo 1 conjugates. The EGFP expression is weaker than bulk lipid-mediated transfection, as indicated by the EGFP fluorescence intensities. However, the success with the single-cell approach is considerably greater than lipid-mediated transfection.

Control of the release of freely diffusing molecules in single-cell electroporation.

Single-cell electroporation using an electrolyte-filled capillary is an emerging technique for transient pore formation in adherent cells. Because adherent cells do not have a simple and consistent shape and because the electric field emanating from the tip of the capillary is inhomogeneous, the Schwan equation based on spherical cells in homogeneous electrical fields does not apply. We sought to determine experimental and cell parameters that influence the outcome of a single-cell electroporation experiment. A549 cells were exposed to the thiol-reactive dye Thioglo-1, leading to green fluorescence from intracellular thiol adducts. Electroporation causes a decrease with time of the intracellular fluorescence intensity of Thioglo-1-loaded cells from diffusive loss of thiol adducts. The transient curves thus obtained are well-described by a simple model originally developed by Puc et al. We find that the final fluorescence following electroporation is related to the capillary tip-to-cell distance and cell size (specifically, 2(A/pi)(1/2) where A is the area of the cell's image in pixels. This quantity is the diameter if the image is a circle). In separate experiments, the relationship obtained can be used to control the final fluorescence following electroporation by adjusting the tip-to-cell distance based on cell size. The relationship was applied successfully to A549 as well as DU 145 and PC-3 cells. Finally, F-tests show that the variability in the final fluorescence (following electroporation) is decreased when the tip-to-cell distance is controlled according to the derived relationship in comparison to experiments in which the tip-cell distance is a constant irrespective of cell size.

Direct access and control of the intracellular solution environment in single cells.

Methods that can control and vary the solution environment around single cells are abundant. In contrast, methods that offer direct access to the intracellular proteome and genome in single cells with the control, flexibility, and convenience given by microfluidic methods are both scarce and in great demand. Here, we present such a method based on using a microfluidic device mounted on a programmable scanning stage and cells on-chip permeabilized by the pore-forming glycoside digitonin. We characterized the on-chip digitonin poration, as well as the solution exchange within cells. Intracellular solution exchange times vary with the dose of exposure to digitonin from less than a second to tens of seconds. Also, the degree of permeabilization obtained for cells treated with the same dose varies considerably, especially for low doses of digitonin exposure and low permeabilities. With the use of the presented setup, the degree of permeabilization can be measured during the permeabilization process, which allows for "on-line" optimization of the digitonin exposure time. Using this calibrated permeabilization method, we demonstrate the generation of intracellular oscillations, intracellular gradients, and the delivery of substrate to initiate enzymatic reactions in situ. This method holds the potential to screen and titrate intracellular receptors or enzymes or to generate intracellular oscillations, useful in the study of signaling pathways and oscillation decoding among other applications.