RESUMEN
Efficient manufacturing of recombinant Adeno-Associated Viral (rAAV) vectors to meet rising clinical demand remains a major hurdle. One of the most significant challenges is the generation of large amounts of empty capsids without the therapeutic genome. There is no standardized analytical method to accurately quantify the viral genes, and subsequently the empty-to-full ratio, making the manufacturing challenges even more complex. We propose the use of CRISPR diagnostics (CRISPR-Dx) as a robust and rapid approach to determine AAV genome titers. We designed and developed the CRISPR-AAV Evaluation (CRAAVE) assay to maximize sensitivity, minimize time-to-result, and provide a potentially universal design for quantifying multiple transgene constructs encapsidated within different AAV serotypes. We also demonstrate an on-chip CRAAVE assay with lyophilized reagents to minimize end user assay input. The CRAAVE assay was able to detect AAV titers as low as 7e7 vg/mL with high precision (<3% error) in quantifying unknown AAV titers when compared with conventional quantitative PCR (qPCR) method. The assay only requires 30 min of assay time, shortening the analytical workflow drastically. Our results suggest CRISPR-Dx could be a promising tool for efficient rAAV genome titer quantification and has the potential to revolutionize biomanufacturing process analytical technology (PAT).
Asunto(s)
Sistemas CRISPR-Cas , Dependovirus , Genoma Viral , Dependovirus/genética , Humanos , Vectores Genéticos/genética , Células HEK293RESUMEN
The manufacturing of gene therapy products is a rapidly growing industry bolstered by the tremendous potential of these therapies to provide lifesaving treatment for rare and complex genetic diseases. The industry's steep rise has resulted in a high demand for skilled staff required to manufacture gene therapy products of the expected high quality. To address this skill shortage, more opportunities for education and training in all aspects of gene therapy manufacturing are needed. The Biomanufacturing Training and Education Center (BTEC) at the North Carolina State University (NC State) has developed and delivered (and continues to deliver) a 4-day, hands-on course titled Hands-on cGMP Biomanufacturing of Vectors for Gene Therapy. The course, which consists of 60% hands-on laboratory activities and 40% lectures, aims to provide a comprehensive understanding of the gene therapy production process, from vial thaw through the final formulation step, and analytical testing. This article discusses the design of the course, the backgrounds of the nearly 80 students who have participated in the seven offerings held since March 2019, and feedback from the course participants.
Asunto(s)
Dependovirus , Terapia Genética , Humanos , Dependovirus/genética , Comercio , Vectores Genéticos/genéticaRESUMEN
Monitoring and measurement of carbon dioxide (CO2) is critical for many fields. The gold standard CO2 sensor, the Severinghaus electrode, has remained unchanged for decades. In recent years, many other CO2 sensor formats, such as detection based upon pH-sensitive dyes, have been demonstrated, opening the door for relatively simple optical detection schemes. However, a majority of these optochemical sensors require complex sensor preparation steps and are difficult to control and repeatably execute. Here, we report a facile CO2 sensor generation method that suffers from none of the typical fabrication issues. The method described here utilizes polydimethylsiloxane (PDMS) as the flexible sensor matrix and 1-hydroxypyrene-3,6,8-trisulfonate (HPTS), a pH-sensitive dye, as the sensing material. HPTS, a base (NaOH), and glycerol are loaded as dense droplets into a thin PDMS layer which is subsequently cured around the droplet. The fabrication process does not require prior knowledge in chemistry or device fabrication and can be completed as quickly as PDMS cures (â¼2 h). We demonstrate the application of this thin-patch sensor for in-line CO2 quantification in cell culture media. To this end, we optimized the sensing composition and quantified CO2 in the range of 0-20 kPa. A standard curve was generated with high fidelity (R 2 = 0.998) along with an analytical resolution of 0.5 kPa (3.7 mm Hg). Additionally, the sensor is fully autoclavable for applications requiring sterility and has a long working lifetime. This flexible, simple-to-manufacture sensor has a myriad of potential applications and represents a new, straightforward means for optical carbon dioxide measurement.
RESUMEN
Furin, also called proprotein convertase subtilisin/kexin 3 (PCSK3), is a calcium-dependent serine endoprotease that processes a wide variety of proproteins involved in cell function and homeostasis. Dysregulation of furin has been implicated in numerous disease states, including cancer and fibrosis. Mammalian cell expression of the furin ectodomain typically produces a highly glycosylated, heterogeneous protein, which can make crystallographic studies difficult. Here, the expression and purification of nonglycosylated human furin using the BacMam technology and site-directed mutagenesis of the glycosylation sites is reported. Nonglycosylated furin produced using this system retains full proteolytic activity indistinguishable from that of the glycosylated protein. Importantly, the nonglycosylated furin protein reliably forms extremely durable apo crystals that diffract to high resolution. These crystals can be soaked with a wide variety of inhibitors to enable a structure-guided drug-discovery campaign.
Asunto(s)
Apoproteínas/química , Bioquímica/métodos , Furina/química , Secuencia de Aminoácidos , Animales , Células CHO , Cricetinae , Cricetulus , Cristalografía por Rayos X , Glicosilación , Células HEK293 , Humanos , Dominios Proteicos , Estructura Secundaria de ProteínaRESUMEN
Many types of disposable bioreactors for protein expression in insect and mammalian cells are now available. They differ in design, capacity, and sensor options, with many selections available for either rocking platform, orbitally shaken, pneumatically mixed, or stirred-tank bioreactors lined with an integral disposable bag (Shukla and Gottschalk, Trends Biotechnol 31(3):147-154, 2013). WAVE Bioreactors™ were among the first disposable systems to be developed (Singh, Cytotechnology 30:149-158, 1999). Since their commercialization in 1999, Wave Bioreactors have become routinely used in many laboratories due to their ease of operation, limited utility requirements, and protein expression levels comparability to traditional stirred-tank bioreactors. Wave Bioreactors are designed to use a presterilized Cellbag™, which is attached to a rocking platform and inflated with filtered air provided by the bioreactor unit. The Cellbag can be filled with medium and cells and maintained at a set temperature. The rocking motion, which is adjusted through angle and rock speed settings, provides mixing of oxygen (and CO2, which is used to control pH in mammalian cell cultures) from the headspace created in the inflated Cellbag with the cell culture medium and cells. This rocking motion can be adjusted to prevent cell shear damage. Dissolved oxygen and pH can be monitored during scale-up, and samples can be easily removed to monitor other parameters. Insect and mammalian cells grow very well in Wave Bioreactors (Shukla and Gottschalk, Trends Biotechnol 31(3):147-154, 2013). Combining Wave Bioreactor cell growth capabilities with recombinant baculoviruses engineered for insect or mammalian cell expression has proven to be a powerful tool for rapid production of a wide range of proteins.