RESUMEN
The temporomandibular joint (TMJ) is one of the most complex joints in the human anatomy. In advanced degenerative stages, conservative or minimally invasive surgical therapies have failed to restore joint function, and joint replacement with prostheses has been required. Stock prostheses, compared to custom-made prostheses, are much less expensive and require less pre-operative preparation time. Four patients followed for years for temporomandibular dysfunction and previously operated on by arthroscopy or open joint surgery that have been reconstructed with stock TMJ prostheses (STMJP) through virtual surgical planning (VSP) and an STL model with surgical and positioning guides were included. The median follow-up was 15 months; the median number of previous TMJ surgeries was 2. The mean preoperative MIO was 24.6 mm and at longest follow-up was 36.4 mm. The median preoperative TMJ pain score was 8, and the median postoperative TMJ pain was 3. All patients have improved their mandibular function with a clear improvement of their initial situation. In conclusion, we believe that stock TMJ prostheses with virtual surgical planning and surgical guides are a good alternative for TMJ reconstruction at the present time. Nonetheless, prospective and randomized trials are required with long-term follow up to assess their performance and safety.
Asunto(s)
Prótesis Articulares , Trastornos de la Articulación Temporomandibular , Humanos , Proyectos Piloto , Trastornos de la Articulación Temporomandibular/cirugía , Estudios Prospectivos , Resultado del Tratamiento , Articulación Temporomandibular/cirugía , DolorRESUMEN
Background: This study aims to present a case of deep cervicofacial abscesses and demonstrate the efficacy of CT-guided drainage with a custom-designed puncture guide in a challenging anatomical location. The use of this type of guide is an innovative technique since CAD-CAM technology has not been used for this type of application until now. Material and Methods: A 76-year-old man with persistent facial swelling and trismus underwent surgical drainage initially, but symptoms persisted. A CT-guided transcutaneous approach was planned using a custom-designed positioning guide created with "in-house" 3D technology. The guide was fabricated using Surgical Guide resin, and the patient underwent successful CT-guided drainage. Results: The intervention facilitated precise drainage without damaging critical anatomical structures. The patient exhibited prompt clinical improvement, shortened hospitalization, and favorable aesthetic outcomes. Conclusions: CT-guided drainage, particularly when combined with a custom puncture guide, offers a less invasive alternative for challenging cervicofacial abscesses. This approach proves valuable in reducing procedure duration, minimizing soft tissue trauma, and enhancing preoperative planning, making it especially beneficial for patients with high anesthetic risk or complex anatomical considerations. Key words:Cervical abscess, 3D technology, drainage guide, percutaneous puncture.
RESUMEN
The advent of 3D surgical technology has revolutionized personalized medicine, enabling the development of tailored solutions for individual patients. This technical note presents the application of 3D technology in designing a customized chin guard using flexible 3D resin. The process involves surface scanning the lower facial region of a polytraumatized patient with a structured-light surface 3D scanner, generating a detailed point cloud. The acquired data undergoes meticulous processing within an specific professional software, including erasing unwanted portions, aligning frames, and mesh consolidation. Subsequently, the mesh is exported as an STL file and further refined using a 3D mesh management software. A customized chin support is designed for the specific patient's needs, exported in STL format, and 3D printed using a stereolithography (SLA) printer with Flexible 80A resin. Post-printing procedures involve washing and curing to ensure biocompatibility and optimal mechanical characteristics. The resultant customized chin guard, attached to elastic support straps, offers a precise fit to the patient's anatomy, enhancing comfort and allowing for extended wear. This innovative approach addresses the challenge of surgical intraoral wound dehiscence in a polytraumatized patient, showcasing the potential of 3D technology in personalized medical solutions for complex cases. Key words:Surface scanner, 3D surgery, customized surgery, chinstrap.
RESUMEN
BACKGROUND: Arteriovenous Malformations (AVMs) are complex vascular anomalies that are usually sporadic and can have a variable clinical course. Treatment of AVMs can lead to severe sequeale and require thorough decision-making. There is a lack of standardized treatment protocols showing a growing need for pharmacological targeted therapies, specially in the most severe cases where surgery may not be feasible. Current knowledge in molecular pathways and genetic diagnosis have shed light in the pathophysiology of AVMs, opening possibilities for personalized treatment strategies. METHODS: We performed a retrospective review of patients with head and neck AVMs treated in our department between 2003 and 2021 and performed a complete physical examination and imaging with ultrasound and angio-CT or MRI. Patients underwent genetic testing on AVMs' tissue samples and/or peripheral blood samples. Patients were grouped according to the genetic variant and a correlation between phenotype and genotype was studied. RESULTS: 22 patients with head and neck AVMs were included. We found eight patients with varians in MAP2K1, four patients with pathogenic variants in KRAS, six patients with pathogenic variants in RASA1, one patient with a pathogenic variant in BRAF, one patient with a pathogenic variant in NF1, another patient with a pathogenic variant in CELSR1 and one patient with pathogenic variants in PIK3CA and GNA14. Patients with MAP2K1 variants were the biggest group, with a moderate clinical course. Patients with KRAS mutations showed the most aggressive clinical course and a high rate of recurrence and osteolysis. Patients with RASA1 variants showed a characteristic phenotype with an ipsilateral capillary malformation in the neck. CONCLUSION: We found a correlation between genotype and phenotype in this group of patients. The genetic diagnosis of AVMs is recommended in order to stablish a personalized treatment strategy. Targeted therapies are currently being investigated with promising results and may be recommended in addition to conventional surgical or embolization procedures, specially in the most complex cases. LEVEL OF EVIDENCE: Level IV.
Asunto(s)
Malformaciones Arteriovenosas , Embolización Terapéutica , Humanos , Perfil Genético , Proteínas Proto-Oncogénicas p21(ras)/genética , Cabeza , Malformaciones Arteriovenosas/genética , Malformaciones Arteriovenosas/terapia , Malformaciones Arteriovenosas/diagnóstico , Embolización Terapéutica/métodos , Progresión de la Enfermedad , Resultado del Tratamiento , Subunidades alfa de la Proteína de Unión al GTP Gq-G11/genética , Proteína Activadora de GTPasa p120/genéticaRESUMEN
Solitary fibrous tumor (STF) is a mesenchymal tumor that mainly appears in the pleura. Its presence in the oral cavity is very uncommon, being the buccal mucosa the most frequent location. Imaging cannot distinguish this entity between other types of tumors, being histological and immunohistochemical studies essential for its diagnosis. Immunohistochemical stains typically show positive results for CD34, Bcl2, and CD99. Surgical removal with wide margins is the gold standard treatment, requiring a close follow up due to recurrence risk. We present a case report of a solitary fibrous tumor located in the buccal cheek mucosa and the surgical approach. Key words:Solitary fibrous tumor, Buccal mucosa, Intraoral, Immunohistochemical markers.
RESUMEN
Advances in 3D printing technology have the potential to significantly improve the workflow of maxillofacial surgical planning. In-house fabricated custom positioning and cutting guides allow for intraoperative reproduction of pre-planned osteotomy cuts, which can result in greater surgical accuracy and patient safety while maintaining an acceptable cost-effectiveness ratio. The design and creation of the customized surgical guides is performed in our hospital fab lab, which allows time savings, from an average of 10 days to just 24 hours, and a cost reduction of more than 90%. The process begins with the import of the pre-surgical facial CT scan into 3D software that allows to perform the surgical cuts virtually and the manipulation of the segments. Once the virtual planning of the surgery has been performed, the next step is the creation of the cutting and positioning guides. The final step is the printing of the guides in surgical resin and their sterilization. In addition, post-surgical models can be 3D printed to pre-mold the plates on them, which saves surgical time. The mentoplasty surgery is a simple example of how 3D surgery can be applied to maxillofacial surgery in an efficient way obtaining all the advantages of customized surgery with a limited investment in time and resources. Key words:3Dsurgery, customized, personalized medicine, genioplasty, surgical guides, in house.
RESUMEN
Background: Oral cancer is the 11th most common type of cancer in the world, with established major risk factors as tobacco and alcohol, and recently included high-risk human papillomavirus types 16 and 18. HPV types 16 and 18 are the etiologic agents of cervical cancers and a proportion of oropharyngeal cancers. However, the picture of HPV and the clinical implications of oral cancers are not clear with most reports combining oral cancer data with head and neck cancers. It has been confirmed as a favorable prognostic factor in oropharyngeal cancer. However, the prognostic value of HPV in oral squamous cell carcinoma is still unclear. Material and Methods: The main objective of this article is to present the evidence encountered following a bibliographical review of recent publications specifically related to oral cancer and its differences from oropharyngeal cancer. The secondary goals are to present the findings of a five-year retrospective observational study of the prevalence of HPV infection in oral cancer patients treated by the Oral and Maxillofacial Surgery Department at La Paz University Hospital (Madrid, Spain), and finally, we to evaluate and compare our country's HPV prevention program in comparison to other European countries. Results: According to the review of the literature, HPV positive oral squamous cell carcinoma is associated with significantly decreased overall survival and distant control. Bibliographic review suggest HPV infection can be used as a negative prognostic factor in oral squamous cell carcinoma. Conclusions: As regards diagnostic testing for HPV, it should be extended to as many cases of oral cavity squamous cell carcinoma as possible, especially in those with risk factors. The current vaccination program in Spain does not have adequate coverage and is significantly under the level of other European Union countries; it should be expanded and catch-up strategies should be included. Key words:HPV, OSSC, Papillomavirus, oral carcinoma, prevention.
RESUMEN
The soft tissue outcome of the projection at the level of the nasomaxillary buttress is difficult to manage in cases of severe hypoprojection, being orthognathic surgery resolutive at the occlusal level but sometimes insufficient at the level of esthetic outcome. The literature describes the use of alloplastic prostheses and autologous bone grafts, but there are few documented cases of the use of premolded surgical cement for this purpose. The main advantage of the use of bone cement over the alternatives described is its ability to be premolded for customization, low cost, easy availability, speed of preparation and minimal comorbidity. This technical note describes the surgical steps and outcome of the use of surgical bone cement for projection augmentation at this level, including notes on preparation, premolding and fixation. Key words:Orthognathic surgery, maxillary surgery, surgical bone cement, nasomaxillary buttress.
RESUMEN
Maxillectomies cause malocclusion, masticatory disorders, swallowing disorders and poor nasolabial projection, with consequent esthetic and functional sequelae. Reconstruction can be achieved with conventional approaches, such as closure of the maxillary defect by microvascular free flap surgery or prosthetic obturation. Four patients with segmental maxillary defects that had been reconstructed with customized subperiosteal titanium maxillary implants (CSTMI) through virtual surgical planning (VSP), STL models and CAD/CAM titanium mesh were included. The smallest maxillary defect was 4.1 cm and the largest defect was 9.6 cm, with an average of 7.1 cm. The reconstructed maxillary vertical dimension ranged from 9.3 mm to 17.4 mm, with a mean of 13.17 mm. The transverse dimension of the maxilla at the crestal level was attempted to be reconstructed based on the pre-excision CT scan, and these measurements ranged from 6.5 mm in the premaxilla area to 14.6 mm at the posterior level. All patients were rehabilitated with a fixed prosthesis on subperiosteal implants with good esthetic and functional results. In conclusion, we believe that customized subperiosteal titanium maxillary implants (CSTMI) are a safe alternative for maxillary defects reconstruction, allowing for simultaneous dental rehabilitation while restoring midface projection. Nonetheless, prospective and randomized trials are required with long-term follow-up, to assess its long-term performance and safety.
RESUMEN
(1) Background: In recent years, three-dimensional (3D) templates have replaced traditional two-dimensional (2D) templates as visual guides during intra-operative carving of the autogenous cartilage framework in microtia reconstruction. This study aims to introduce a protocol of the fabrication of patient-specific, 3D printed and sterilizable auricular models for autogenous auricular reconstruction. (2) Methods: The patient's unaffected ear was captured with a high-resolution surface 3D scan (Artec Eva) and post-processed in order to obtain a clean surface model (STL format). In the next step, the ear was digitally mirrored, segmented and separated into its component auricle parts for reconstruction. It was disassembled into helix, antihelix, tragus and base and a physical model was 3D printed for each part. Following this segmentation, the cartilage was carved in the operating room, based on the models. (3) Results: This segmentation technique facilitates the modeling and carving of the scaffold, with adequate height, depth, width and thickness. This reduces both the surgical time and the amount of costal cartilage used. (4) Conclusions: This segmentation technique uses surface scanning and 3D printing to produce sterilizable and patient-specific 3D templates.