Regulating the reduction reaction pathways via manipulating the solvation shell and donor number of the solvent in Li-CO2 chemistry.

Transforming CO2 into valuable chemicals is an inevitable trend in our current society. Among the viable end-uses of CO2, fixing CO2 as carbon or carbonates via Li-CO2 chemistry could be an efficient approach, and promising achievements have been obtained in catalyst design in the past. Even so, the critical role of anions/solvents in the formation of a robust solid electrolyte interphase (SEI) layer on cathodes and the solvation structure have never been investigated. Herein, lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) in two common solvents with various donor numbers (DN) have been introduced as ideal examples. The results indicate that the cells in dimethyl sulfoxide (DMSO)-based electrolytes with high DN possess a low proportion of solvent-separated ion pairs and contact ion pairs in electrolyte configuration, which are responsible for fast ion diffusion, high ionic conductivity, and small polarization. The 3 M DMSO cell delivered the lowest polarization of 1.3 V compared to all the tetraethylene glycol dimethyl ether (TEGDME)-based cells (about 1.7 V). In addition, the coordination of the O in the TFSI- anion to the central solvated Li+ ion was located at around 2 Å in the concentrated DMSO-based electrolytes, indicating that TFSI- anions could access the primary solvation sheath to form an LiF-rich SEI layer. This deeper understanding of the electrolyte solvent property for SEI formation and buried interface side reactions provides beneficial clues for future Li-CO2 battery development and electrolyte design.

Achieving a Deeply Desodiated Stabilized Cathode Material by the High Entropy Strategy for Sodium-ion Batteries.

Manganese-based layered oxides are currently of significant interest as cathode materials for sodium-ion batteries due to their low toxicity and high specific capacity. However, the practical applications are impeded by sluggish intrinsic Na+ migration and poor structure stability as a result of Jahn-Teller distortion and complicated phase transition. In this study, a high-entropy strategy is proposed to enhance the high-voltage capacity and cycling stability. The designed P2-Na0.67Mn0.6Cu0.08Ni0.09Fe0.18Ti0.05O2 achieves a deeply desodiation and delivers charging capacity of 158.1 mAh g-1 corresponding to 0.61 Na with a high initial Coulombic efficiency of 98.2 %. The charge compensation is attributed to the cationic and anionic redox reactions conjunctively. Moreover, the crystal structure is effectively stabilized, leading to a slight variation of lattice parameters. This research carries implications for the expedited development of low-cost, high-energy-density cathode materials for sodium-ion batteries.

Designing a hybrid electrode toward high energy density with a staged Li+ and PF6 - deintercalation/intercalation mechanism.

Existing lithium-ion battery technology is struggling to meet our increasing requirements for high energy density, long lifetime, and low-cost energy storage. Here, a hybrid electrode design is developed by a straightforward reengineering of commercial electrode materials, which has revolutionized the "rocking chair" mechanism by unlocking the role of anions in the electrolyte. Our proof-of-concept hybrid LiFePO4 (LFP)/graphite electrode works with a staged deintercalation/intercalation mechanism of Li+ cations and PF6 - anions in a broadened voltage range, which was thoroughly studied by ex situ X-ray diffraction, ex situ Raman spectroscopy, and operando neutron powder diffraction. Introducing graphite into the hybrid electrode accelerates its conductivity, facilitating the rapid extraction/insertion of Li+ from/into the LFP phase in 2.5 to 4.0 V. This charge/discharge process, in turn, triggers the in situ formation of the cathode/electrolyte interphase (CEI) layer, reinforcing the structural integrity of the whole electrode at high voltage. Consequently, this hybrid LFP/graphite-20% electrode displays a high capacity and long-term cycling stability over 3,500 cycles at 10 C, superior to LFP and graphite cathodes. Importantly, the broadened voltage range and high capacity of the hybrid electrode enhance its energy density, which is leveraged further in a full-cell configuration.

Revealing the Origin of Transition-Metal Migration in Layered Sodium-Ion Battery Cathodes: Random Na Extraction and Na-Free Layer Formation.

Cation migration often occurs in layered oxide cathodes of lithium-ion batteries due to the similar ion radius of Li and transition metals (TMs). Although Na and TM show a big difference of ion radius, TMs in layered cathodes of sodium-ion batteries (SIBs) can still migrate to Na layer, leading to serious electrochemical degeneration. To elucidate the origin of TM migration in layered SIB cathodes, we choose NaCrO2 , a typical layered cathode suffering from serious TM migration, as a model material and find that the TM migration is derived from the random desodiation and subsequent formation of Na-free layer at high charge potential. A Ru/Ti co-doping strategy is developed to address the issue, where the doped active Ru is first oxidized to create a selective desodiation and the doped inactive Ti can function as a pillar to avoid complete desodiation in Ru-contained TM layers, leading to the suppression of the Na-free layer formation and subsequent enhanced electrochemical performance.

Prussian Blue Analogues with Optimized Crystal Plane Orientation and Low Crystal Defects toward 450†Wh kg-1 Alkali-Ion Batteries.

Prussian blue analogues (PBAs) have been regarded as promising cathode materials for alkali-ion batteries owing to their high theoretical energy density and low cost. However, the high water and vacancy content of PBAs lower their energy density and bring safety issues, impeding their large-scale application. Herein, a facile "potassium-ions assisted" strategy is proposed to synthesize highly crystallized PBAs. By manipulating the dominant crystal plane and suppressing vacancies, the as-prepared PBAs exhibit increased redox potential resulting in high energy density up to ≈450 Wh kg-1 , which is at the same level of the well-known LiFePO4 cathodes for lithium-ion batteries. Remarkably, unconventional highly-reversible phase evolution and redox-active pairs were identified by multiple in situ techniques for the first time. The preferred guest-ion storage sites and migration mechanism were systematically analysed through theoretical calculations. We believe these results could inspire the design of safe with high energy density.

Stabilizing Cobalt-free Li-rich Layered Oxide Cathodes through Oxygen Lattice Regulation by Two-phase Ru Doping.

The application of Li-rich layered oxides is hindered by their dramatic capacity and voltage decay on cycling. This work comprehensively studies the mechanistic behaviour of cobalt-free Li1.2 Ni0.2 Mn0.6 O2 and demonstrates the positive impact of two-phase Ru doping. A mechanistic transition from the monoclinic to the hexagonal behaviour is found for the structural evolution of Li1.2 Ni0.2 Mn0.6 O2, and the improvement mechanism of Ru doping is understood using the combination of in operando and post-mortem synchrotron analyses. The two-phase Ru doping improves the structural reversibility in the first cycle and restrains structural degradation during cycling by stabilizing oxygen (O2- ) redox and reducing Mn reduction, thus enabling high structural stability, an extraordinarily stable voltage (decay rate <0.45 mV per cycle), and a high capacity-retention rate during long-term cycling. The understanding of the structure-function relationship of Li1.2 Ni0.2 Mn0.6 O2 sheds light on the selective doping strategy and rational materials design for better-performance Li-rich layered oxides.

In Operando Neutron Scattering Multiple-Scale Studies of Lithium-Ion Batteries.

Real-time observation of the electrochemical mechanistic behavior at various scales offers new insightful information to improve the performance of lithium-ion batteries (LIBs). As complementary to the X-ray-based techniques and electron microscopy-based methodologies, neutron scattering provides additional and unique advantages in materials research, owing to the different interactions with atomic nuclei. The non-Z-dependent elemental contrast, in addition to the high penetration ability and weak interaction with matters, makes neutron scattering an advanced probing tool for the in operando mechanistic studies of LIBs. The neutron-based techniques, such as neutron powder diffraction, small-angle neutron scattering, neutron reflectometry, and neutron imaging, have their distinct functionalities and characteristics regimes. These result in their scopes of application distributed in different battery components and covering the full spectrum of all aspects of LIBs. The review surveys the state-of-the-art developments of real-time investigation of the dynamic evolutions of electrochemically active compounds at various scales using neutron techniques. The atomic-scale, the mesoscopic-scale, and at the macroscopic-scale within LIBs during electrochemical functioning provide insightful information to battery researchers. The authors envision that this review will popularize the applications of neutron-based techniques in LIB studies and furnish important inspirations to battery researchers for the rational design of the new generation of LIBs.

Introducing 4s-2p Orbital Hybridization to Stabilize Spinel Oxide Cathodes for Lithium-Ion Batteries.

Oxides composed of an oxygen framework and interstitial cations are promising cathode materials for lithium-ion batteries. However, the instability of the oxygen framework under harsh operating conditions results in fast battery capacity decay, due to the weak orbital interactions between cations and oxygen (mainly 3d-2p interaction). Here, a robust and endurable oxygen framework is created by introducing strong 4s-2p orbital hybridization into the structure using LiNi0.5 Mn1.5 O4 oxide as an example. The modified oxide delivers extraordinarily stable battery performance, achieving 71.4 % capacity retention after 2000 cycles at 1 C. This work shows that an orbital-level understanding can be leveraged to engineer high structural stability of the anion oxygen framework of oxides. Moreover, the similarity of the oxygen lattice between oxide electrodes makes this approach extendable to other electrodes, with orbital-focused engineering a new avenue for the fundamental modification of battery materials.

Chromium Ion Pair Luminescence: A Strategy in Broadband Near-Infrared Light-Emitting Diode Design.

Portable near-infrared (NIR) light sources are in high demand for applications in spectroscopy, night vision, bioimaging, and many others. Typical phosphor designs feature isolated Cr3+ ion centers, and it is challenging to design broadband NIR phosphors based on Cr3+-Cr3+ pairs. Here, we explore the solid-solution series SrAl11.88-xGaxO19:0.12Cr3+ (x = 0, 2, 4, 6, 8, 10, and 12) as phosphors featuring Cr3+-Cr3+ pairs and evaluate structure-property relations within the series. We establish the incorporation of Ga within the magentoplumbite-type structure at five distinct crystallographic sites and evaluate the effect of this incorporation on the Cr3+-Cr3+ ion pair proximity. Electron paramagnetic measurements reveal the presence of both isolated Cr3+ and Cr3+-Cr3+ pairs, resulting in NIR luminescence at approximately 650-1050 nm. Unexpectedly, the origin of broadband NIR luminescence with a peak within the range 740-820 nm is related to the Cr3+-Cr3+ ion pair. We demonstrate the application of the SrAl5.88Ga6O19:0.12Cr3+ phosphor, which possesses an internal quantum efficiency of ∼85%, a radiant flux of ∼95 mW, and zero thermal quenching up to 500 K. This work provides a further understanding of spectral shifts in phosphor solid solutions and in particular the application of the magentoplumbites as promising next-generation NIR phosphor host systems.

Multi-Site Cation Control of Ultra-Broadband Near-Infrared Phosphors for Application in Light-Emitting Diodes.

Near-infrared (NIR) phosphors are fascinating materials that have numerous applications in diverse fields. In this study, a series of La3Ga5GeO14:Cr3+ phosphors, which was incorporated with Sn4+, Ba2+, and Sc3+, was successfully synthesized using solid-state reaction to explore every cationic site comprehensively. The crystal structures were well resolved by combining synchrotron X-ray diffraction and neutron powder diffraction through joint Rietveld refinements. The trapping of free electrons induced by charge unbalances and lattice vacancies changes the magnetic properties, which was well explained by a Dyson curve in electron paramagnetic resonance. Temperature and pressure-dependent photoluminescence spectra reveal various luminescent properties between strong and weak fields in different dopant centers. The phosphor-converted NIR light-emitting diode (pc-NIR LED) package demonstrates a superior broadband emission that covers the near-infrared (NIR) region of 650-1050 nm. This study can provide researchers with new insight into the control mechanism of multiple-cation-site phosphors and reveal a potential phosphor candidate for practical NIR LED application.

An Intrinsically Non-flammable Electrolyte for High-Performance Potassium Batteries.

Potassium-ion batteries are promising for low-cost and large-scale energy storage applications, but the major obstacle to their application is the lack of safe and effective electrolytes. A phosphate-based fire retardant such as triethyl phosphate is now shown to work as a single solvent with potassium bis(fluorosulfonyl)imide at 0.9 m, in contrast to previous Li and Na systems where phosphates cannot work at low concentrations. This electrolyte is optimized at 2 m, where it exhibits the advantages of low cost, low viscosity, and high conductivity, as well as the formation of a uniform and robust salt-derived solid-electrolyte interphase layer, leading to non-dendritic K-metal plating/stripping with Coulombic efficiency of 99.6 % and a highly reversible graphite anode.

A Long Cycle-Life High-Voltage Spinel Lithium-Ion Battery Electrode Achieved by Site-Selective Doping.

Spinel LiNi0.5 Mn1.5 O4 (LNMO) is a promising cathode candidate for the next-generation high energy-density lithium-ion batteries (LIBs). Unfortunately, the application of LNMO is hindered by its poor cycle stability. Now, site-selectively doped LNMO electrode is prepared with exceptional durability. In this work, Mg is selectively doped onto both tetrahedral (8a) and octahedral (16c) sites in the Fd 3 ‾ m structure. This site-selective doping not only suppresses unfavorable two-phase reactions and stabilizes the LNMO structure against structural deformation, but also mitigates the dissolution of Mn during cycling. Mg-doped LNMOs exhibit extraordinarily stable electrochemical performance in both half-cells and prototype full-batteries with novel TiNb2 O7 counter-electrodes. This work pioneers an atomic-doping engineering strategy for electrode materials that could be extended to other energy materials to create high-performance devices.

Heterocarbides Reinforced Electrochemical Energy Storage.

The feasibility of transition metal carbides (TMCs) as promising high-rate electrodes is still hindered by low specific capacity and sluggish charge transfer kinetics. Improving charge transport kinetics motivates research toward directions that would rely on heterostructures. In particular, heterocomposing with carbon-rich TMCs is highly promising for enhancing Li storage. However, due to limited synthesis methods to prepare carbon-rich TMCs, understanding the interfacial interaction effect on the high-rate performance of TMCs is often neglected. In this work, a novel strategy is proposed to construct a binary carbide heteroelectrode, i.e. incorporating the carbon-rich TMC (M=Mo) with its metal-rich TMC nanowires (nws) via an ingenious in situ disproportionation reaction. Results show that the as-prepared MoC-Mo2 C-heteronanowires (hnws) electrode could fully recover its capacity after high-rates testing, and also possesses better lithium accommodation performance. Kinetic analysis verified that both electron and ion transfer in MoC-Mo2 C-hnws are superior to those of its singular counterparts. Such improvements suggest that by taking utilization of the interfacial component interactions of stoichiometry tunable heterocarbides, the electrochemical performance, especially high-rate capability of carbides, could be significantly enhanced.

Enhanced Structural Stability of Nickel-Cobalt Hydroxide via Intrinsic Pillar Effect of Metaborate for High-Power and Long-Life Supercapacitor Electrodes.

Layered α-Ni(OH)2 and its derivative bimetallic hydroxides (e.g., α-(Ni/Co)(OH)2) have attracted much attention due to their high specific capacitance, although their insufficient cycling stability has blocked their wide application in various technologies. In this work, we demonstrate that the cycling performance of α-(Ni/Co)(OH)2 can be obviously enhanced via the intrinsic pillar effect of metaborate. Combining the high porosity feature of the metaborate stabilized α-(Ni/Co)(OH)2 and the improved electronic conductivity offered by graphene substrate, the average capacitance fading rate of the metaborate stabilized α-(Ni/Co)(OH)2 is only ∼0.0017% per cycle within 10 000 cycles at the current density of 5 A g-1. The rate performance is excellent over a wide temperature range from -20 to 40 °C. We believe that the enhancements should mainly be ascribed to the excellent structural stability offered by the metaborate pillars, and the detailed mechanism is discussed.

The Origin of Capacity Fade in the Li2MnO3·LiMO2 (M = Li, Ni, Co, Mn) Microsphere Positive Electrode: An Operando Neutron Diffraction and Transmission X-ray Microscopy Study.

The mechanism of capacity fade of the Li2MnO3·LiMO2 (M = Li, Ni, Co, Mn) composite positive electrode within a full cell was investigated using a combination of operando neutron powder diffraction and transmission X-ray microscopy methods, enabling the phase, crystallographic, and morphological evolution of the material during electrochemical cycling to be understood. The electrode was shown to initially consist of 73(1) wt % R3̅m LiMO2 with the remaining 27(1) wt % C2/m Li2MnO3 likely existing as an intergrowth. Cracking in the Li2MnO3·LiMO2 electrode particle under operando microscopy observation was revealed to be initiated by the solid-solution reaction of the LiMO2 phase on charge to 4.55 V vs Li(+)/Li and intensified during further charge to 4.7 V vs Li(+)/Li during the concurrent two-phase reaction of the LiMO2 phase, involving the largest lattice change of any phase, and oxygen evolution from the Li2MnO3 phase. Notably, significant healing of the generated cracks in the Li2MnO3·LiMO2 electrode particle occurred during subsequent lithiation on discharge, with this rehealing being principally associated with the solid-solution reaction of the LiMO2 phase. This work reveals that while it is the reduction of lattice size of electrode phases during charge that results in cracking of the Li2MnO3·LiMO2 electrode particle, with the extent of cracking correlated to the magnitude of the size change, crack healing is possible in the reverse solid-solution reaction occurring during discharge. Importantly, it is the phase separation during the two-phase reaction of the LiMO2 phase that prevents the complete healing of the electrode particle, leading to pulverization over extended cycling. This work points to the minimization of behavior leading to phase separation, such as two-phase and oxygen evolution, as a key strategy in preventing capacity fade of the electrode.

Na2 Ti6 O13 Nanorods with Dominant Large Interlayer Spacing Exposed Facet for High-Performance Na-Ion Batteries.

As the delegate of tunnel structure sodium titanates, Na2 Ti6 O13 nanorods with dominant large interlayer spacing exposed facet are prepared. The exposed large interlayers provide facile channels for Na(+) insertion and extraction when this material is used as anode for Na-ion batteries (NIBs). After an activation process, this NIB anode achieves a high specific capacity (a capacity of 172 mAh g(-1) at 0.1 A g(-1) ) and outstanding cycling stability (a capacity of 109 mAh g(-1) after 2800 cycles at 1 A g(-1) ), showing its promising application on large-scale energy storage systems. Furthermore, the electrochemical and structural characterization reveals that the expanded interlayer spacings should be in charge of the activation process, including the enhanced kinetics, the lowered apparent activation energy, and the increased capacity.

Crystallographic origin of cycle decay of the high-voltage LiNi0.5Mn1.5O4 spinel lithium-ion battery electrode.

High-voltage spinel LiNi0.5Mn1.5O4 (LNMO) is considered a potential high-power-density positive electrode for lithium-ion batteries, however, it suffers from capacity decay after extended charge-discharge cycling, severely hindering commercial application. Capacity fade is thought to occur through the significant volume change of the LNMO electrode occurring on cycling, and in this work we use operando neutron powder diffraction to compare the structural evolution of the LNMO electrode in an as-assembled 18650-type battery containing a Li4Ti5O12 negative electrode with that in an identical battery following 1000 cycles at high-current. We reveal that the capacity reduction in the battery post cycling is directly proportional to the reduction in the maximum change of the LNMO lattice parameter during its evolution. This is correlated to a corresponding reduction in the MnO6 octahedral distortion in the spinel structure in the cycled battery. Further, we find that the rate of lattice evolution, which reflects the rate of lithium insertion and removal, is ∼9 and ∼10% slower in the cycled than in the as-assembled battery during the Ni(2+)/Ni(3+) and Ni(3+)/Ni(4+) transitions, respectively.

Self-Assembled Sandwich-like Vanadium Oxide/Graphene Mesoporous Composite as High-Capacity Anode Material for Lithium Ion Batteries.

Sandwich-like V2O5/graphene mesoporous composite has been synthesized by a facile solvothermal approach. The crystalline structure, morphology, and electrochemical performance of the as-prepared materials have been investigated in detail. The results demonstrate that the 30-50 nm V2O5 particles are homogeneously anchored on conducting graphene sheets, which allow the V2O5 nanoparticles to be wired up to a current collector through the underlying conducting graphene layers. As an anode material for lithium ion batteries, the composite exhibits a high reversible capacity of 1006 mAh g(-1) at a current density of 0.5 A g(-1) after 300 cycles. It also exhibits excellent rate performance with a discharge capacity of 500 mAh g(-1) at the current density of 3.0 A g(-1), which is superior to the performance of the vanadium-based materials reported previously. The electrochemical properties demonstrate that the sandwich-like V2O5/graphene mesoporous composite could be a promising candidate material for high-capacity anode in lithium ion batteries.

Domination of second-sphere shrinkage effect to improve photoluminescence of red nitride phosphors.

Red Ca0.99Al(1-4δ/3-x)Si(1+δ+x)N(3-x)C(x):Eu(2+)0.01 (δ = 0.345; x = 0-0.2) nitride phosphors exhibit a blue-shifted emission with increased eye sensitivity function and excellent thermal stability. The variations in the photoluminescence in the Ca0.99Al(1-4δ/3-x)Si(1+δ+x)N(3-x)C(x):Eu(2+)0.01 (δ = 0.345; x = 0-0.2) system are thoroughly investigated. The enhanced emission energy and the improved thermal stability with increasing x are dominated by the second-sphere shrinkage effect via the substitution of small Si(4+) for large Al(3+) with simultaneous charge compensation. Related proofs of the second-sphere shrinkage effect control for photoluminescence are confirmed via high-resolution neutron powder diffraction, EXAFS, and (29)Si solid-state NMR techniques.

Electrochemistry and structure of the cobalt-free Li1+xMO2 (M = Li, Ni, Mn, Fe) composite cathode.

The development of cathode materials with high capacity and cycle stability is essential to emerging electric-vehicle technologies, however, of serious environmental concern is that materials with these properties developed so far contain the toxic and expensive Co. We report here the Li-rich, Co-free Li1+xMO2 (M = Li, Ni, Mn, Fe) composite cathode material, prepared via a template-free, one-step wet-chemical method followed by conventional annealing in an oxygen atmosphere. The cathode has an unprecedented level of cation mixing, where the electrochemically-active component contains four elements at the transition-metal (3a) site and 20% Ni at the active Li site (3b). We find Ni(2+)/Ni(3+)/Ni(4+) to be the active redox-center of the cathode with lithiation/delithiation occurring via a solid-solution reaction where the lattice responds approximately linearly with cycling, differing to that observed for iso-structural commercial cathodes with a lower level of cation mixing. The composite cathode has ∼75% active material and delivers an initial discharge-capacity of ∼103 mA h g(-1) with a reasonable capacity retention of ∼84.4% after 100 cycles. Notably, the electrochemically-active component possesses a capacity of ∼139 mA h g(-1), approaching that of the commercialized LiCoO2 and Li(Ni1/3Mn1/3Co1/3)O2 materials. Importantly, our operando neutron powder-diffraction results suggest excellent structural stability of this active component, which exhibits ∼80% less change in its stacking-axis than for LiCoO2 with approximately the same capacity, a characteristic that may be exploited to enhance significantly the capacity retention of this and similar materials.