Performance-limiting nanoscale trap clusters at grain junctions in halide perovskites.

Halide perovskite materials have promising performance characteristics for low-cost optoelectronic applications. Photovoltaic devices fabricated from perovskite absorbers have reached power conversion efficiencies above 25 per cent in single-junction devices and 28 per cent in tandem devices1,2. This strong performance (albeit below the practical limits of about 30 per cent and 35 per cent, respectively3) is surprising in thin films processed from solution at low-temperature, a method that generally produces abundant crystalline defects4. Although point defects often induce only shallow electronic states in the perovskite bandgap that do not affect performance5, perovskite devices still have many states deep within the bandgap that trap charge carriers and cause them to recombine non-radiatively. These deep trap states thus induce local variations in photoluminescence and limit the device performance6. The origin and distribution of these trap states are unknown, but they have been associated with light-induced halide segregation in mixed-halide perovskite compositions7 and with local strain8, both of which make devices less stable9. Here we use photoemission electron microscopy to image the trap distribution in state-of-the-art halide perovskite films. Instead of a relatively uniform distribution within regions of poor photoluminescence efficiency, we observe discrete, nanoscale trap clusters. By correlating microscopy measurements with scanning electron analytical techniques, we find that these trap clusters appear at the interfaces between crystallographically and compositionally distinct entities. Finally, by generating time-resolved photoemission sequences of the photo-excited carrier trapping process10,11, we reveal a hole-trapping character with the kinetics limited by diffusion of holes to the local trap clusters. Our approach shows that managing structure and composition on the nanoscale will be essential for optimal performance of halide perovskite devices.

Iridium-Cooperated, Symmetry-Broken Manganese Oxide Nanocatalyst for Water Oxidation.

The water oxidation reaction, the most important reaction for hydrogen production and other sustainable chemistry, is efficiently catalyzed by the Mn4CaO5 cluster in biological photosystem II. However, synthetic Mn-based heterogeneous electrocatalysts exhibit inferior catalytic activity at neutral pH under mild conditions. Symmetry-broken Mn atoms and their cooperative mechanism through efficient oxidative charge accumulation in biological clusters are important lessons but synthesis strategies for heterogeneous electrocatalysts have not been successfully developed. Here, we report a crystallographically distorted Mn-oxide nanocatalyst, in which Ir atoms break the space group symmetry from I41/amd to P1. Tetrahedral Mn(II) in spinel is partially replaced by Ir, surprisingly resulting in an unprecedented crystal structure. We analyzed the distorted crystal structure of manganese oxide using TEM and investigated how the charge accumulation of Mn atoms is facilitated by the presence of a small amount of Ir.

Tailoring the Time-Averaged Structure for Polarization-Sensitive Chiral Perovskites.

Chiral perovskites have emerged as promising candidates for polarization-sensing materials. Despite their excellent chiroptical properties, the nature of their multiple-quantum-well structures is a critical hurdle for polarization-based and spintronic applications. Furthermore, as the origin of chiroptical activity in chiral perovskites is still illusive, the strategy for simultaneously enhancing the chiroptical activity and charge transport has not yet been reported. Here, we demonstrated that incorporating a Lewis base into the lattice can effectively tune the chiroptical response and electrical properties of chiral perovskites. Through solid-state nuclear magnetic resonance spectroscopic measurements and theoretical calculations, it was demonstrated that the material property manipulation resulted from the change in the time-averaged structure induced by the Lewis base. Finally, as a preliminary proof of concept, a vertical-type circularly polarized light photodetector based on chiral perovskites was developed, exhibiting an outstanding performance with a distinguishability of 0.27 and a responsivity of 0.43 A W-1.

Cost-Effective Hybrid Density Functional Theory Calculation of Three-Dimensional Band Structure and Search of Band Edge Positions.

Accurate calculation of the electronic band structure is essential to material screening and design. Hybrid density functional has been recently widely used to describe the electronic structure of semiconductors; however, it is difficult to locate the band edge positions of indirect band gap materials due to heavy computational cost especially when the band edges are not located at special k-points. We suggest how to investigate three-dimensional band structure efficiently with hybrid density functionals and to find the band edge positions. The band edge position of diamond Si, SbSI, and MoS2 are investigated using the proposed method.

Enhanced Charge Transport in 2D Perovskites via Fluorination of Organic Cation.

Organic-inorganic halide perovskites incorporating two-dimensional (2D) structures have shown promise for enhancing the stability of perovskite solar cells (PSCs). However, the bulky spacer cations often limit charge transport. Here, we report on a simple approach based on molecular design of the organic spacer to improve the transport properties of 2D perovskites, and we use phenethylammonium (PEA) as an example. We demonstrate that by fluorine substitution on the para position in PEA to form 4-fluorophenethylammonium (F-PEA), the average phenyl ring centroid-centroid distances in the organic layer become shorter with better aligned stacking of perovskite sheets. The impact is enhanced orbital interactions and charge transport across adjacent inorganic layers as well as increased carrier lifetime and reduced trap density. Using a simple perovskite deposition at room temperature without using any additives, we obtained a power conversion efficiency of >13% for (F-PEA)2MA4Pb5I16-based PSCs. In addition, the thermal stability of 2D PSCs based on F-PEA is significantly enhanced compared to those based on PEA.

Evaluation of cell-surface displayed synthetic consensus dengue EDIII cells as a potent oral vaccine candidate.

BACKGROUND: Dengue is a rapidly spreading mosquito borne tropical viral disease affecting hundreds of millions of people across the globe annually. The dengue virus (DENV) includes four genetically distinct serotypes that cause serious life-threatening infections, including dengue hemorrhagic fever/dengue shock syndrome. Dengue vaccine development is complicated by the possibility of vaccine-enhanced severe dengue disease due to antibody-dependent enhancement by pre-existing cross-reactivity, as well as homotypic antibodies. Thus, the development of an efficacious dengue vaccine conferring simultaneous and durable immunity to each of the four DENV serotypes has not yet been developed despite years of research. For mass immunization in deeply affected resource-limited countries, oral vaccination is considered more beneficial than conventional approaches. Therefore, in a continuing effort towards designing economical and potent vaccine candidates, the current study applied yeast surface display technology to develop an oral dengue vaccine candidate using whole recombinant yeast cells displaying the recombinant fusion protein of M cell targeting ligand Co1 fused to the synthetic consensus dengue envelope domain III (scEDIII). Female Balb/c mice were orally fed with recombinant yeast cells and immunogenicity in terms of systemic and mucosal immune responses was monitored. RESULTS: Immunofluorescence microscopy with dengue specific antibody and fluorescein isothiocyanate-conjugated anti-mouse IgG antibody clearly showed that recombinant protein Co1-scEDIII-AGA was localized on the cell surface of the respective clones in comparison with scEDIII-Co1 and Mock cells with no fluorescence. Oral dosage applications of surface displayed Co1-scEDIII-AGA stimulated a systemic humoral immune response in the form of dengue-specific serum IgG, as well as a mucosal immune response in the form of secretory immunoglobulin A (sIgA). Antigen-specific B cell responses in isolated lymphoid cells from the spleen and Peyer's patches further supported an elevated mucosal immune response. In addition, surface displayed Co1-scEDIII-AGA feeding elicited strong immune responses in comparison with scEDIII-Co1 and Mock following intraperitoneal booster with purified scEDIII antigen. CONCLUSIONS: Surface displayed preparations of Co1-scEDIII-AGA induced strong immunogenicity compared with non-displayed scEDIII-Co1. Prior studies have supported the neutralization potential of scEDIII constructs against all four serotypes. Thus, the oral administration of genetically engineered yeast whole cells displaying biologically active Co1-scEDIII fusion protein without any further processing shows prospective as a potent oral vaccine candidate against dengue viral infection.

Comparative immunogenicity of preparations of yeast-derived dengue oral vaccine candidate.

BACKGROUND: Dengue is listed as a neglected tropical disease by the Center for Disease Control and Preservation, as there are insufficient integrated surveillance strategies, no effective treatment, and limited licensed vaccines. Consisting of four genetically distinct serotypes, dengue virus (DENV) causes serious life-threatening infections due to its complexity. Antibody-dependent enhancement by pre-existing cross-reactive as well as homotypic antibodies further worsens the clinical symptoms of dengue. Thus, a vaccine conferring simultaneous and durable immunity to each of the four DENV serotypes is essential to restrict its escalation. In deeply affected resource-limited countries, oral vaccination using food-grade organisms is considered to be a beneficial approach in terms of costs, patient comfort, and simple logistics for mass immunization. The current study used a mouse model to explore the immunogenicity of an oral dengue vaccine candidate prepared using whole recombinant yeast cells (WC) and cell-free extracts (CFE) from cells expressing recombinant Escherichia coli heat-labile toxin protein B-subunit (LTB) fused to the consensus dengue envelope domain III (scEDIII). Mice were treated orally with recombinant WC and CFE vaccines in 2-week intervals for 4 weeks and changes in systemic and mucosal immune responses were monitored. RESULTS: Both WC and CFE dosage applications of LTB-scEDIII stimulated a systemic humoral immune response in the form of dengue-specific serum IgG as well as mucosal immune response in the form of secretory sIgA. Antigen-specific B cell responses in isolated lymphoid cells from the spleen and Peyer's patches further indicated an elevated mucosal immune response. Cellular immune response estimated through lymphocyte proliferation assay indicated higher levels in CFE than WC dosage. Furthermore, sera obtained after both oral administrations successfully neutralized DENV-1, whereas CFE formulation only neutralized DENV-2 serotype, two representative serotypes which cause severe dengue infection. Sera from mice that were fed CFE preparations demonstrated markedly higher neutralizing titers compared to those from WC-fed mice. However, WC feeding elicited strong immune responses, which were similar to the levels induced by CFE feeding after intraperitoneal booster with purified scEDIII antigen. CONCLUSIONS: CFE preparations of LTB-scEDIII produced strong immunogenicity with low processing requirements, signifying that this fusion protein shows promise as a potent oral vaccine candidate against dengue viral infection.

Red ginseng powder fermented with probiotics exerts antidiabetic effects in the streptozotocin-induced mouse diabetes model.

CONTEXT: Red ginseng (heat-processed Panax ginseng) is a well-known alternative medicine with pharmacological antidiabetic activity. It exerts pharmacological effects through the transformation of saponin into metabolites by the intestinal microbiota. Given that intestinal conditions and intestinal microflora vary among individuals, the pharmacological effects of orally administered red ginseng likely may vary among individuals. OBJECTIVE: To overcome this variation and produce homogeneously effective red ginseng, we evaluated the antidiabetic effects of probiotic-fermented red ginseng in a mouse model. MATERIALS AND METHODS: The antidiabetic efficacy of orally administered probiotic-fermented red ginseng was assessed in ICR mice after induction of diabetes using streptozotocin (170 mg/kg body weight). Samples were given orally for 8 weeks, and indicators involved in diabetic disorders such as body weight change, water intake, blood glucose, glucose tolerance and various biochemical parameters were determined. RESULTS: Oral administration of probiotic-fermented red ginseng significantly decreased the level of blood glucose of about 62.5% in the fasting state and induced a significant increase in glucose tolerance of about 10.2% compared to the control diabetic mice. Additionally, various indicators of diabetes and biochemical data (e.g., blood glycosylated haemoglobin level, serum concentrations of insulin, and α-amylase activity) showed a significant improvement in the diabetic conditions of the mice treated with probiotic-fermented red ginseng in comparison with those of control diabetic mice. DISCUSSION AND CONCLUSION: Our results demonstrate the antidiabetic effects of probiotic-fermented red ginseng in the streptozotocin-induced mouse diabetes model and suggest that probiotic-fermented red ginseng may be a uniformly effective red ginseng product.

Investigation of Acoustic Structure Quantification in the Diagnosis of Thyroiditis.

OBJECTIVE: The objective of this study was to evaluate the ability of acoustic structure quantification (ASQ) to diagnose thyroiditis. MATERIALS AND METHODS: The echogenicity of 439 thyroid lobes, as determined using ASQ, was quantified and analyzed retrospectively. Thyroiditis was categorized into five subgroups. The results were presented in a modified chi-square histogram as the mode, average, ratio, blue mode, and blue average. We determined the cutoff values of ASQ from ROC analysis to detect and differentiate thyroiditis from a normal thyroid gland. We obtained data on the sensitivity and specificity of the cutoff values to distinguish between euthyroid patients with thyroiditis and patients with a normal thyroid gland. RESULTS: The mean ASQ values for patients with thyroiditis were statistically significantly greater than those for patients with a normal thyroid gland (p < 0.001). The AUCs were as follows: 0.93 for the ratio, 0.91 for the average, 0.90 for the blue average, 0.87 for the mode, and 0.87 for the blue mode. For the diagnosis of thyroiditis, the cutoff values were greater than 0.27 for the ratio, greater than 116.7 for the mean, and greater than 130.7 for the blue average. The sensitivities and specificities were as follows: 84.0% and 96.6% for the ratio, 85.3% and 83.0%, for the average, and 79.1% and 93.2% for the blue average, respectively. The ASQ parameters were successful in distinguishing patients with thyroiditis from patients with a normal thyroid gland, with likelihood ratios of 24.7 for the ratio, 5.0 for the average, and 11.6 for the blue average. With the use of the aforementioned cutoff values, the sensitivities and specificities for distinguishing between patients with thyroiditis and euthyroid patients without thyroiditis were 77.05% and 94.92% for the ratio, 85.25% and 82.20% for the average, and 77.05% and 92.37% for the blue average, respectively. CONCLUSION: ASQ can provide objective and quantitative analysis of thyroid echogenicity. ASQ parameters were successful in distinguishing between patients with thyroiditis and individuals without thyroiditis, with likelihood ratios of 24.7 for the ratio, 5.0 for the average, and 11.6 for the blue average.

Ferroelectric Stochasticity in 2D CuInP2S6 and Its Application for True Random Number Generator.

True random number generators (TRNGs), which create cryptographically secure random bitstreams, hold great promise in addressing security concerns regarding hardware, communication, and authentication in the Internet of Things (IoT) realm. Recently, TRNGs based on nanoscale materials have gained considerable attention for avoiding conventional and predictable hardware circuitry designs that can be vulnerable to machine learning (ML) attacks. In this article, a low-power and low-cost TRNG developed by exploiting stochastic ferroelectric polarization switching in 2D ferroelectric CuInP2S6 (CIPS)-based capacitive structures, is reported. The stochasticity arises from the probabilistic switching of independent electrical dipoles. The TRNG exhibits enhanced stochastic variability with near-ideal entropy, uniformity, uniqueness, Hamming distance, and independence from autocorrelation variations. Its unclonability is systematically examined using device-to-device variations. The generated cryptographic bitstreams pass the National Institute of Standards and Technology (NIST) randomness tests. This nanoscale CIPS-based TRNG is circuit-integrable and exhibits potential for hardware security in edge devices with advanced data encryption.

Self-Assembly of Organic Semiconductors on Strained Graphene under Strain-Induced Pseudo-Electric Fields.

Graphene is used as a growth template for van der Waals epitaxy of organic semiconductor (OSC) thin films. During the synthesis and transfer of chemical-vapor-deposited graphene on a target substrate, local inhomogeneities in the graphene-in particular, a nonuniform strain field in the graphene template-can easily form, causing poor morphology and crystallinity of the OSC thin films. Moreover, a strain field in graphene introduces a pseudo-electric field in the graphene. Here, the study investigates how the strain and strain-induced pseudo-electric field of a graphene template affect the self-assembly of π-conjugated organic molecules on it. Periodically strained graphene templates are fabricated by transferring graphene onto an array of nanospheres and then analyzed the growth and nucleation behavior of C60 thin films on the strained graphene templates. Both experiments and a numerical simulation demonstrated that strained graphene reduced the desorption energy between the graphene and the C60 molecules and thereby suppressed both nucleation and growth of the C60. A mechanism is proposed in which the strain-induced pseudo-electric field in graphene modulates the binding energy of organic molecules on the graphene.

One-Shot Remote Integration of Macromolecular Synaptic Elements on a Chip for Ultrathin Flexible Neural Network System.

The field of biomimetic electronics that mimic synaptic functions has expanded significantly to overcome the limitations of the von Neumann bottleneck. However, the scaling down of the technology has led to an increasingly intricate manufacturing process. To address the issue, this work presents a one-shot integrable electropolymerization (OSIEP) method with remote controllability for the deposition of synaptic elements on a chip by exploiting bipolar electrochemistry. Condensing synthesis, deposition, and patterning into a single fabrication step is achieved by combining alternating-current voltage superimposed on direct-current voltage-bipolar electropolymerization and a specially designed dual source/drain bipolar electrodes. As a result, uniform 6 × 5 arrays of poly(3,4-ethylenedioxythiophene) channels are successfully fabricated on flexible ultrathin parylene substrates in one-shot process. The channels exhibited highly uniform characteristics and are directly used as electrochemical synaptic transistor with synaptic plasticity over 100 s. The synaptic transistors have demonstrated promising performance in an artificial neural network (NN) simulation, achieving a high recognition accuracy of 95.20%. Additionally, the array of synaptic transistor is easily reconfigured to a multi-gate synaptic circuit to implement the principles of operant conditioning. These results provide a compelling fabrication strategy for realizing cost-effective and disposable NN systems with high integration density.

Fluorinated Organic Cations Derived Chiral 2D Perovskite Enabling Enhanced Spin-Dependent Oxygen Evolution Reaction.

Chirality-induced spin selectivity observed in chiral 2D organic-inorganic hybrid perovskite holds promise to achieve spin-dependent electrochemistry. However, conventional chiral 2D perovskites suffer from low conductivity and hygroscopicity, limiting electrochemical performance and operational stability. Here, a cutting-edge material design is introduced to develop a stable and efficient chiral perovskite-based spin polarizer by employing fluorinated chiral cation. The fluorination approach effectively promotes the charge carrier transport along the out-of-plane direction by mitigating the dielectric confinement effect within the multi-quantum well-structured 2D perovskite. Integrating the fluorinated cation incorporated spin polarizer with BiVO4 photoanode considerably boosts the photocurrent density while reducing overpotential through a spin-dependent oxygen evolution reaction. Furthermore, the hydrophobic nature of fluorine in spin polarizer endows operational stability to the photoanode, extending the durability by 280% as compared to the device with non-fluorinated spin polarizer.

Atmospheric Humidity Underlies Irreproducibility of Formamidinium Lead Iodide Perovskites.

Metal halide perovskite solar cells (PSCs) are infamous for their batch-to-batch and lab-to-lab irreproducibility in terms of stability and performance. Reproducible fabrication of PSCs is a critical requirement for market viability and practical commercialization. PSC irreproducibility plagues all levels of the community; from institutional research laboratories, start-up companies, to large established corporations. In this work, the critical function of atmospheric humidity to regulate the crystallization and stabilization of formamidinium lead triiodide (FAPbI3) perovskites is unraveled. It is demonstrated that the humidity content during processing induces profound variations in perovskite stoichiometry, thermodynamic stability, and optoelectronic quality. Almost counterintuitively, it is shown that the presence of humidity is perhaps indispensable to reproduce phase-stable and efficient FAPbI3-based PSCs.

Strain-graded quantum dots with spectrally pure, stable and polarized emission.

Structural deformation modifies the bandgap, exciton fine structure and phonon energy of semiconductors, providing an additional knob to control their optical properties. The impact can be exploited in colloidal semiconductor quantum dots (QDs), wherein structural stresses can be imposed in three dimensions while defect formation is suppressed by controlling surface growth kinetics. Yet, the control over the structural deformation of QDs free from optically active defects has not been reached. Here, we demonstrate strain-graded CdSe-ZnSe core-shell QDs with compositionally abrupt interface by the coherent pseudomorphic heteroepitaxy. Resulting QDs tolerate mutual elastic deformation of varying magnitudes at the interface with high structural fidelity, allowing for spectrally stable and pure emission of photons at accelerated rates with near unity luminescence efficiency. We capitalize on the asymmetric strain effect together with the quantum confinement effect to expand emission envelope of QDs spanning the entire visible region and exemplify their use in photonic applications.

Growth Control of InP/ZnSe Heterostructured Nanocrystals.

The morphology of heterostructured semiconductor nanocrystals (h-NCs) dictates the spatial distribution of charge carriers and their recombination dynamics and/or transport, which are the main performance indicators of photonic applications utilizing h-NCs. The inability to control the morphology of heterovalent III-V/II-VI h-NCs composed of heavy-metal-free elements hinders their practical use. As a case study of III-V/II-VI h-NCs, the growth control of ZnSe epilayers on InP NCs is demonstrated here. The anisotropic morphology in InP/ZnSe h-NCs is attributed to the facet-dependent energy costs for the growth of ZnSe epilayers on different facets of InP NCs, and effective chemical means for controlling the growth rates of ZnSe on different surface planes are demonstrated. Ultimately, this article capitalizes on the controlled morphology of InP/ZnSe h-NCs to expand their photophysical characteristics from stable and pure emission to environment-sensitive one, which will facilitate their use in a variety of photonic applications.

Stability and segregation of B and P dopants in Si/SiO2 core-shell nanowires.

Using molecular dynamics simulations, we generate realistic atomic models for oxidized Si nanowires which consist of a crystalline Si core and an amorphous SiO(2) shell. The amorphous characteristics of SiO(2) are well reproduced, as compared to those for bulk amorphous silica. Based on first-principles density functional calculations, we investigate the stability and segregation of B and P dopants near the radial interface between Si and SiO(2). Although substitutional B atoms are more stable in the core than in the oxide, B dopants can segregate to the oxide with the aid of Si self-interstitials which are generated during thermal oxidation. The segregation of B dopants occurs in the form of B interstitials in the oxide, leaving the self-interstitials in the Si core. In the case of P dopants, dopant segregation to the oxide is unfavorable even in the presence of self-interstitials. Instead, we find that P dopants tend to aggregate in the Si region near the interface and may form nearest-neighbor donor pairs, which are energetically more stable than isolated P dopants.

Recombinant Protein Mimicking the Antigenic Structure of the Viral Surface Envelope Protein Reinforces Induction of an Antigen-Specific and Virus-Neutralizing Immune Response Against Dengue Virus.

Dengue virus (DENV), belonging to the family Flaviviridae, is the causative agent of dengue and comprises four serotypes. A second heterologous DENV infection is a critical risk factor for severe dengue, and no effective vaccine is available to prevent infection by all four DENV serotypes. Recombinant DENV vaccines are primarily based on the envelope proteins, prM and E. The E protein and its envelope domain III (EDIII) have been investigated as candidate antigens (Ags) for recombinant subunit vaccines. However, most EDIII-based Ags are monomers that do not display the cognate antigenic structure of E protein, which is essential for induction of virus-neutralizing immunity. Here, we developed recombinant DENV-2 envelope domain (r2ED) protein as an Ag that mimics the quaternary structure of E protein on the DENV surface. We confirmed that r2ED retained the conformational epitope displayed at the E-dimer interface, which reportedly exhibits broad virus-neutralizing capacity, without displaying the fusion loop epitope that causes antibody (Ab)-dependent enhancement. Furthermore, compared with EDIII alone, r2ED elicited stronger Ag-specific and cross-reactive neutralizing Ab and T cell-mediated immune responses in mice. This Ag-specific immunity was maintained at an elevated level 6 months after the last immunization, suggesting sustained Ag-specific immune memory. Taken together, these observations suggest that r2ED could be used to develop an improved subunit vaccine capable of inducing a broadly cross-reactive and long-lasting immune response against DENV infection.

P- and N-type InAs nanocrystals with innately controlled semiconductor polarity.

InAs semiconductor nanocrystals (NCs) exhibit intriguing electrical/optoelectronic properties suitable for next-generation electronic devices. Although there is a need for both n- and p-type semiconductors in such devices, InAs NCs typically exhibit only n-type characteristics. Here, we report InAs NCs with controlled semiconductor polarity. Both p- and n-type InAs NCs can be achieved from the same indium chloride and aminoarsine precursors but by using two different reducing agents, diethylzinc for p-type and diisobutylaluminum hydride for n-type NCs, respectively. This is the first instance of semiconductor polarity control achieved at the synthesis level for InAs NCs and the entire semiconductor nanocrystal systems. Comparable field-effective mobilities for holes (3.3 × 10-3 cm2/V·s) and electrons (3.9 × 10-3 cm2/V·s) are achieved from the respective NC films. The mobility values allow the successful fabrication of complementary logic circuits, including NOT, NOR, and NAND comprising photopatterned p- and n-channels based on InAs NCs.

Enhancing Efficiency and Stability of Tin Halide Perovskite Light-Emitting Diodes via Engineered Alkali/Multivalent Metal Salts.

Sn-based perovskite light-emitting diodes (PeLEDs) have emerged as promising alternatives to Pb-based PeLEDs with their rapid increase in performance owing to the various research studies on inhibiting Sn oxidation. However, the absence of defect passivation strategies for Sn-based perovskite LEDs necessitates further research in this field. We performed systematic studies to investigate the design rules for defect passivation agents for Sn-based perovskites by incorporating alkali/multivalent metal salts with various cations and anions. From the computational and experimental analyses, sodium trifluoromethanesulfonate (NaTFMS) was found to be the most effective passivation agent for PEA2SnI4 films among the explored candidate agents owing to favorable reaction energetics to passivate iodide Frenkel defects. Consequently, the incorporation of NaTFMS facilitates the formation of uniform films with relatively large crystals and reduced Sn4+. The NaTFMS-containing PEA2SnI4 PeLEDs demonstrate an improved luminance of 138.9 cd/m2 and external quantum efficiency (EQE) of 0.39% with an improved half-lifetime of more than threefold. This work provides important insight into the design of defect passivation agents for Sn-based perovskites.