RESUMEN
We present the experimental realization of a method to generate predetermined, arbitrary pulse shapes after transmission through an optical fiber in the nonlinear regime. The method is based on simulating the reverse propagation of the desired pulse shape in the fiber. First, linear and nonlinear parameters of a single-mode step-index fiber required for the simulation are determined. The calculated pulse shapes are then generated in a pulse shaper.
RESUMEN
We present a method to reconstruct the pulse shape of polarization-shaped femtosecond laser pulses after a hollow-core photonic crystal fiber by reflecting the pulses back through the fiber. First, a procedure is introduced to receive the optical fiber properties and generate parametrically shaped pulses after propagation through the fiber. Changes of the fiber's birefringence by mechanical stress are examined to investigate the correlation between the pulse shapes after one and two passes through the fiber. Finally, we demonstrate the characterization of the pulse after one pass through the fiber by calculating the pulse shape from the measured pulse after two passes.
RESUMEN
Here, we present a stage-scanning two-photon microscope (2PM) equipped with a temporal pulse shaper and a spatial light modulator enabling full control over spectral and spatial phases of the exciting laser pulse. We demonstrate the capability of correcting wavefronts and temporal pulse distortions without cross-dependencies induced by optical elements at the same time enhancing the fluorescence signal. We implemented phase resolved interferometric spectral modulation for temporal pulse shaping and the iterative feedback adaptive compensation technique for spatial pulse modulation as iterative techniques. Sample distortions were simulated by cover glass plates in the optical path and by chirping the exciting laser pulses. Optimization of the spectral and spatial phases results in a signal increase of 30% and nearly complete recovery of the losses. Applying a measured spatial compensation phase within a real leaf sample shows the enhancement in contrast due to wavefront shaping with local fluorescence increase up to 75%. The setup allows full independent control over spatial and spectral phases keeping or improving the spatial resolution of our microscope and provides the optimal tool for sensitive non-linear and coherent control microscopy.
RESUMEN
Light can be used to modify and control properties of media, as in the case of electromagnetically induced transparency or, more recently, for the generation of slow light or bright coherent XUV and X-ray radiation. Particularly unusual states of matter can be created by light fields with strengths comparable to the Coulomb field that binds valence electrons in atoms, leading to nearly-free electrons oscillating in the laser field and yet still loosely bound to the core [1,2]. These are known as Kramers-Henneberger states [3], a specific example of laser-dressed states [2]. Here, we demonstrate that these states arise not only in isolated atoms [4,5], but also in rare gases, at and above atmospheric pressure, where they can act as a gain medium during laser filamentation. Using shaped laser pulses, gain in these states is achieved within just a few cycles of the guided field. The corresponding lasing emission is a signature of population inversion in these states and of their stability against ionization. Our work demonstrates that these unusual states of neutral atoms can be exploited to create a general ultrafast gain mechanism during laser filamentation.