RESUMEN
Poly lactic acid (PLA) is a compostable, as well as recyclable, sustainable, versatile and environmentally friendly alternative, because the monomer of PLA-lactide (LA) is extracted from natural sources. PLA's techno-functional properties are fairly similar to fossil-based polymers; however, in pristine state, its brittleness and delicacy during processing pose challenges to its potential exploitation in diverse food packaging applications. PLA is, therefore, re-engineered to improve its thermal, rheological, barrier and mechanical properties through nanoparticle (NP) reinforcement. This review summarises the studies on PLA-based nanocomposites (PLA NCs) developed by reinforcing inorganic metal/metallic oxide, graphite and silica-based nanoparticles (NPs) that exhibit remarkable improvement in terms of storage modulus, tensile strength, crystallinity, glass transition temperature (Tg) value, antimicrobial property and a decrease in water vapour and oxygen permeability when compared with the pristine PLA films. This review has also discussed the regulations around the use of metal oxide-based NPs in food packaging, PLA NC biodegradability and their applications in food systems. The industrial acceptance of NCs shows highly promising perspectives for the replacement of traditional petrochemical-based polymers currently being used for food packaging.
Asunto(s)
Antibacterianos , Embalaje de Alimentos , Nanocompuestos/química , Poliésteres , Antibacterianos/química , Antibacterianos/farmacología , Bacterias/efectos de los fármacos , Plásticos Biodegradables , Nanopartículas , Permeabilidad , Poliésteres/química , Poliésteres/farmacología , Vapor , Resistencia a la TracciónRESUMEN
The present study was aimed at studying the physico-chemical and functional properties of 31 Portuguese common bean varieties. In addition, the whole bean flours (WBF) and starch isolates (SI) of three representative bean varieties and their rice: bean blends (70:30; 50:50) were assessed for amylose content, thermal and pasting properties in view of supplementation in rice based processed foods. Bean varieties showed significant differences in protein content (20.78-27.10%), fat content (1.16-2.18%), hydration capacity (95.90-149.30%), unhydrated seeds (4.00-40.00%), γ tocopherol (3.20-98.05 mg/100 g fat), δ tocopherol (0.06-4.72 mg/100 g fat) and pasting behavior. Amylose content of WBF (11.4-20.2%) was significantly lower than rice flour (23.51%) whereas SI of beans (40.00-47.26%) had significantly higher amylose content than SI of rice (28.13%). DSC results showed that WBF (11.4-20.2 °C) had significantly broader and lower gelatinization temperature range (∆Tr) than corresponding SI (20.9-23.1 °C). WBF had significantly lower pasting viscosity due to low starch content and compositional matrix effect as compared to SI. Setback viscosities of WBF and rice: bean blends was lower than rice flour. Low setback viscosities of rice:bean blends may be used to prevent syneresis and stabilizing the quality of frozen foods in rice based processed foods.
RESUMEN
Biopolymer-based packaging films were prepared from pectin (PEC) and sodium alginate (SA), with the incorporation of 10â¯% MCC and different concentrations of geraniol (GER at 2.5, 5.0, 7.5, and 10.0â¯%). Rheological properties suggested that film-forming solutions and film-forming emulsions exhibited a shear-thinning or pseudo-plastic non-Newtonian behaviour. The dried films were crosslinked with 2.0â¯% CaCl2. The addition of MCC into PEC/SA film enhanced the TS but reduced it with the impregnation of GER without influencing the EAB and toughness of the film. The water solubility of the films significantly reduced with the rise in the GER levels but enhanced the water vapor and oxygen barrier attributes. TGA demonstrated that incorporating MCC reduced the film's thermal degradation (44.92â¯% to 28.81â¯%), but GER had an insignificant influence on the thermal stability. FTIR spectra revealed that hydrogen bond formation was positively linked with the GER addition in the film formulation. X-ray diffractograms showed that prepared films were predominantly amorphous. Antimicrobial studies showed a complete reduction of Escherichia coli and Bacillus cereus in 24â¯h. Overall, the composite film displayed excellent physical and active properties and PEC/SA/MCC/5.0â¯%GER/CaCl2 film was considered the best formulation for food packaging applications.
Asunto(s)
Monoterpenos Acíclicos , Alginatos , Celulosa , Embalaje de Alimentos , Pectinas , Embalaje de Alimentos/métodos , Alginatos/química , Pectinas/química , Monoterpenos Acíclicos/química , Monoterpenos Acíclicos/farmacología , Celulosa/química , Solubilidad , Reología , Escherichia coli/efectos de los fármacos , Bacillus cereus/efectos de los fármacosRESUMEN
The present work investigated the structure-function relationship of dry fractionated oat flour (DFOF) as a techno-functional ingredient using bread as a model system. Mechanically, DFOF fractions (F), that is, F1: <224 µm, F2: 250-280 µm, F3: 280-500 µm, F4: 500-600 µm, and whole oat flour (F5) were blended with white wheat flour at 10%, 30%, and 50% substitution levels for bread making. The blended flours, doughs, and bread samples were assessed for their techno-functional, nutritional, and structural characteristics. The results of Mixolab and the Rapid Visco Analyzer show that the 50% substituted F3 fraction exhibits the highest water absorption properties (69.53%), whereas the 50% F1 fraction exhibits the highest peak viscosity of the past slurry. Analysis of bread samples revealed a lower particle size of DFOF fractions and higher supplementation levels, increased ß-glucan levels (0.13-1.29 g/100 bread (db), reduced fermentable monosaccharides, that is, glucose (1.44-0.33 g/100 g), and fructose (1.06-0.28 g/100 g). The effect of particle size surpassed the substitution level effect on bread volume reduction. The lowest hardness value for F1 is 10%, and the highest value for F2 is 50%. The total number of cells in the bread slice decreased from the control to the F4 fraction (50%). Multi-criteria analysis indicated that DFOF fractions produced breads with similar structure and higher nutritional value developed from white wheat flour. PRACTICAL APPLICATION: The use of mechanically fractionated oat flours fractions in white wheat flour breads can improve the nutritional profile without affecting the physical properties of the bread product. Based on the oat flour fractions, bakers and food processing companies can tailor the bread formulations for high ß-glucan, high fiber, and low reduced sugar claims.
Asunto(s)
Avena , Pan , Harina , Manipulación de Alimentos , Valor Nutritivo , Triticum , Pan/análisis , Avena/química , Harina/análisis , Triticum/química , Manipulación de Alimentos/métodos , Tamaño de la Partícula , Viscosidad , Relación Estructura-Actividad , beta-Glucanos/análisis , beta-Glucanos/químicaRESUMEN
The market has observed a rapid increase in the demand for plant-based foods as an alternative to animal meat products. Technologies such as high-moisture extrusion (HME) have the potential to develop anisotropic structures using alternative protein ingredients. This article discusses the different possible mechanisms responsible for structure formation and the effect of extrusion process parameters and outlines the recent advances in the long cooling dies (LCDs) used for meat alternative development. The role of different protein ingredients and the impact of combining them with other biopolymers were also evaluated. The underlying mechanism behind anisotropic structure formation during HME is a synergistic effect, with substantial dependence on the source of ingredients and their processing background. Formulation including proteins derived from plants, insects, animals, and microalgae with other biopolymers could pave the way to develop structured meat alternatives and fill nutritional interstices. Dynamic or rotating annular gap cooling dies operating at freely controllable shear and static annular gap dies are recent developments and assist to produce layered or fibrous structures. The complex chemical sites created during the HME of plant protein favour flavour and colour retention. This paper summarises the recent information published in the scientific literature and patents, which could further help researchers to fill the present knowledge gaps.
RESUMEN
The application of chitin in food systems is limited by its insolubility in some common solvents and poor degradability. Hence, it is deacetylated to obtain chitosan, an industrially important derivative with excellent biological properties. Fungal-sourced chitosan is gaining prominence and industrial attraction because of its superior functional and biological properties, and vegan appeal. Further, the absence of such compounds as tropomyosin, myosin light chain, and arginine kinase, which are known to trigger allergic reactions, gives it an edge over marine-sourced chitosan in food and pharmaceutical applications. Mushrooms are macro-fungi with a significant content of chitin, with many authors reporting the highest content to be in the mushroom stalks. This indicates a great potential for the valorisation of a hitherto waste product. Hence, this review was written to provide a global summary of literature reports on the extraction and yield of chitin and chitosan from different fruiting parts of some species of mushrooms, different methods used to quantify extracted chitin, as well as physicochemical properties of chitin and chitosan from some mushroom species are presented. Critical comparisons of reports on chitin and chitosan from mushrooms and other sources are made. This report concludes with an exposition of the potential application of mushroom-sourced chitosan for food packaging application. The reports from this review provide a very positive outlook regarding the use of mushrooms as a sustainable source of chitin and chitosan and the subsequent application of chitosan as a functional component in food packaging.
Asunto(s)
Agaricales , Quitosano , Quitosano/química , Quitina/química , Agaricales/química , Embalaje de Alimentos , ResiduosRESUMEN
This research aimed to investigate the feasibility of using a bionanocomposite made of chitosan, CNC, and TiO2 nanoparticles to package freshly sliced apples. At the outset, the effect of varying concentrations of CNC (1, 5, and 10 %) and TiO2 (1, 3, and 5 %) on the mechanical, thermal, and water sensitivity characteristics of the chitosan bionanocomposite was studied. Among different combinations, the bionanocomposite containing 10 % CNC and 3 % TiO2 displayed significant enhancements compared to neat chitosan film. Notably, it exhibited a substantial increase in tensile strength (78.2 %), glass transition temperature (26.7 %), and melting temperature (30.0 %) compared to neat chitosan film. Additionally, it demonstrated reduced WVP (27.8 %), FWS (44.4 %), and SR (50.7 %). These improvements were attributed to the synergistic interactions among chitosan, CNC, and TiO2 nanoparticles through hydrogen and oxygen bonding, corroborated by spectral changes in the material. The photocatalytic degradation of ethylene and microbes by UV-A (intermittent) activated TiO2 contained in the developed bionanocomposite was confirmed by the retention of acceptable quality and radical scavenging activity (70 % retention) of fresh-cut apple slices up to 11 days. The developed bionanocomposite can thus preserve the quality of ethylene-producing horticultural produce.
Asunto(s)
Quitosano , Malus , Nanocompuestos , Nanopartículas , Quitosano/química , Celulosa/química , Nanopartículas/química , Etilenos , Nanocompuestos/química , Embalaje de AlimentosRESUMEN
Suitable packaging material in combination with high-pressure processing (HPP) can retain nutritional and organoleptic qualities besides extending the product's shelf life of food products. However, the selection of appropriate packaging materials suitable for HPP is tremendously important because harsh environments like high pressure and high temperature during the processing can result in deviation in the visual and functional properties of the packaging materials. Traditionally, fossil-based plastic packaging is preferred for the HPP of food products, but these materials are of serious concern to the environment. Therefore, bio-based packaging systems are proposed to be a promising alternative to fossil-based plastic packaging. Some studies have scrutinized the impact of HPP on the functional properties of biopolymer-based packaging materials. This review summarizes the HPP application on biopolymer-based film-forming solutions and pre-formed biopolymer-based films. The impact of HPP on the key packaging properties such as structural, mechanical, thermal, and barrier properties in addition to the migration of additives from the packaging material into food products were systemically analyzed. HPP can be applied either to the film-forming solution or preformed packages. Structural, mechanical, hydrophobic, barrier, and thermal characteristics of the films are enhanced when the film-forming solution is exposed to HPP overcoming the shortcomings of the native biopolymers-based film. Also, biopolymer-based packaging mostly PLA based when exposed to HPP at low temperature showed no significant deviation in packaging properties indicating the suitability of their applications. HPP may induce the migration of packaging additives and thus should be thoroughly studied. Overall, HPP can be one way to enhance the properties of biopolymer-based films and can also be used for packaging food materials intended for HPP.