RESUMEN
Clarithromycin is a very important macrolide antibiotic used to treat bacterial infections in human and veterinary medicine. This study reports the development and validation of cost-effective, simple, precise, accurate, and robust high-performance liquid chromatography (HPLC) for the determination of clarithromycin (CLA) in tablets. Reversed-phase chromatography was conducted using a standard column at 55°C with ultraviolet detection at 215 nm. A mobile phase consisting of acetonitrile -2-methyl-2-propanol -potassium phosphate buffer was used at a flow rate of 1.0 mL/min. The proposed method displayed good linearity, precision, accuracy, robustness, and specificity. The present HPLC was compared with capillary electrophoresis and bioassay methods and the results indicated that there was no significant difference between these methods. Moreover, the obtained results demonstrated the validity of the isocratic HPLC, which allows reliable quantitation of CLA in pharmaceutical samples. Thus, it can be used as a substitute alternative methodology for the routine quality control of this medicine, in situations where other methods are less accessible in the laboratory.
Asunto(s)
Antibacterianos , Claritromicina , Humanos , Cromatografía Líquida de Alta Presión/métodos , Comprimidos , Reproducibilidad de los ResultadosRESUMEN
A simple and robust capillary zone electrophoresis method was developed and validated for the determination of amoxicillin and clavulanate, ampicillin, phenoxymethyl penicillin (Pen V) as well as flucloxacillin. Capacitively coupled contactless conductivity detection was employed as detection mode that makes CE a simple and economic tool for money-constrained laboratories. The developed method is straightforward and user-friendly. It offers good sensitivity and sufficient selectivity for the routine assay of the selected penicillins. The repeatabilities were <1.9% RSD for relative peak areas and <1% RSD for migration times for all the analytes. The method showed good linearity (R2 > 0.995) within the 80-120% range of the target concentration (0.5 mg/mL) for each antibiotic. The accuracy of the method, evaluated by standard fortification at three levels, was good for all the analytes. An extended robustness study was performed by varying ±10% of the optimum value of TRIS concentration, l-histidine concentration and temperature in a full factorial design at two levels. This was to evaluate larger than usual variability of factors on the assay value, in order to better cover potential global variance in lab conditions and equipment. Finally, the method was applied for the determination of percent (%) content of all antibiotics in available formulations.
Asunto(s)
Electroforesis Capilar/economía , Electroforesis Capilar/métodos , Penicilinas/análisis , Conductividad Eléctrica , Límite de Detección , Modelos Lineales , Penicilinas/química , Reproducibilidad de los ResultadosRESUMEN
This review summarizes recent developments, applications, and innovations of capillary electrophoretically mediated microanalysis methods. As a follow up of an earlier review, it covers the literature from early 2015 to early 2017. This article is divided into three parts. In the first part, different types of mixing procedures and applications of enzyme mediated microanalysis are discussed; the second part summarizes immobilized enzyme reactors (IMERs), while the third part deals with recent advances in on-line derivatization reactions.
Asunto(s)
Electroforesis Capilar/métodos , Enzimas Inmovilizadas/química , Electroforesis Capilar/instrumentación , Ensayos Analíticos de Alto Rendimiento/métodos , Espectrometría de Masas/métodos , Microquímica/métodos , Propiedades de SuperficieRESUMEN
A capillary electrophoresis with capacitively coupled contactless conductivity detection based method for the assay of azithromycin, clarithromycin and clindamycin was optimized and validated in this study. A buffer solution of 20 mM 2-(N-morpholino) ethane sulfonic acid, 40 mM l-histidine and 0.6 mM cetyltrimethylammonium bromide (pH 6.39) was used for the electrophoresis. An uncoated, bare-fused silica capillary (total length 60 cm, effective length 32 cm, 75 µm id) was used at 25°C. The sample was injected hydrodynamically at 0.5 psi for 5 s. The electrophoresis was conducted at 30 kV in reverse polarity for 6 min with 3 and 2 min of in-between sodium hydroxide (0.1 M) and background electrolyte rinsing, respectively. Ammonium acetate was used as internal standard. This simple and robust method showed reasonable limit of detection and limit of quantitation for azithromycin (0.0125/0.03 mg/mL), clarithromycin (0.017/0.03 mg/mL), and clindamycin (0.038/0.06 mg/mL), with good selectivity, precision both intraday (relative standard deviation ≤ 1.0%) and interday (relative standard deviation < 3.7%), linearity (R2 > 0.999) and recovery (99 - 101.7%). The method was successfully applied for the determination of azithromycin, clarithromycin and clindamycin in formulations.
Asunto(s)
Azitromicina/análisis , Claritromicina/análisis , Clindamicina/análisis , Conductividad Eléctrica , Electroforesis CapilarRESUMEN
This review describes briefly the high rate of counterfeiting of antimicrobial drugs with focus upon its immediate health consequences. The major part of this review encompasses accounts of the improvements achieved in the domain of miniaturization of capillary electrophoresis with capacitively coupled contactless conductivity detection (CE-C4D). The application of this principle into the development of portable devices as well as its application to counter the health-system-crippling phenomenon of counterfeit antibiotic formulations, are discussed in the context of developing countries.
Asunto(s)
Antibacterianos/análisis , Medicamentos Falsificados/análisis , Fraude/prevención & control , Tecnología Química Verde/métodos , Microquímica/métodos , Países en Desarrollo/economía , Conductividad Eléctrica , Electroforesis Capilar/economía , Electroforesis Capilar/instrumentación , Electroforesis Capilar/métodos , Electroforesis Capilar/tendencias , Fraude/economía , Tecnología Química Verde/economía , Tecnología Química Verde/instrumentación , Tecnología Química Verde/tendencias , Microquímica/economía , Microquímica/instrumentación , Microquímica/tendencias , Sensibilidad y EspecificidadRESUMEN
Cystinosis is a hereditary genetic disease that results in the accumulation of cystine crystals in the lysosomes, leading to many clinical manifestations. One of these manifestations is the formation of corneal cystine crystals, which can cause serious ocular complications. The only available drug to treat cystinosis is cysteamine, which breaks cystine and depletes its accumulation in the lysosomes. However, the oral form of cysteamine is not effective in treating corneal manifestations. Thus, ophthalmic solutions of cysteamine are applied. Because the commercial cysteamine eye drops are not available in most countries, hospital pharmacies are responsible for preparing "homemade" drops usually without a control of stability of cysteamine in different storage conditions. Hence, we aimed in this study to investigate the effect of different storage conditions on the stability of a cysteamine ophthalmic compounded solution. Cysteamine ophthalmic solution was prepared in the hospital pharmacy and sterilized using a candle filter. The preparations are then stored either in the freezer at -20°C or in the refrigerator at +4°C for up to 52 weeks. The amount of cysteamine hydrochloride in the preparation at different time points was determined using capillary electrophoresis (CE). Storage of the cysteamine ophthalmic preparations at +4° resulted in significant loss of free cysteamine at all time points, from 1 to 52 weeks of storage, when compared with storage in the freezer (-20°C). We demonstrate that cysteamine 0.5% compounded eye drops are easily oxidized within the first week after storage at +4°C, rendering the preparation less effective. Storage at -20°C is recommended to prevent this process.
RESUMEN
Cystinosis is a genetic disorder caused by malfunction of cystinosin and is characterized by accumulation of cystine. Cysteamine, the medication used in cystinosis, causes halitosis resulting in poor patient compliance. Halitosis is mainly caused by the formation of dimethylsulfide as the final product in the cysteamine metabolism pathway. We have synthesized carbohydrate-cysteamine thiazolidines, and hypothesized that the hydrolytic breakdown of cysteamine-thiazolidines can result in free cysteamine being released in target organs. To examine our hypothesis, we tested these analogs in vitro in patient-derived fibroblasts. Cystinotic fibroblasts were treated with different concentrations of arabinose-cysteamine, glucose-cysteamine and maltose-cysteamine. We demonstrated that the analogs break down into cysteamine extracellularly and might therefore not be fully taken up by the cells under the form of the pro-drug. Potential modifications of the analogs that enable their intracellular rather than extracellular breakdown, is necessary to pursue the potential of these analogs as pro-drugs.
Asunto(s)
Cisteamina/química , Espacio Extracelular/química , Fibroblastos/metabolismo , Profármacos/síntesis química , Tiazolidinas/síntesis química , Arabinosa/química , Biotransformación , Cisteamina/metabolismo , Cisteamina/farmacología , Depletores de Cistina/metabolismo , Depletores de Cistina/farmacología , Cistinosis/metabolismo , Cistinosis/patología , Diseño de Fármacos , Espacio Extracelular/metabolismo , Fibroblastos/efectos de los fármacos , Glucosa/química , Humanos , Hidrólisis , Lactosa/química , Estructura Molecular , Cultivo Primario de Células , Profármacos/farmacología , Ribosa/química , Sulfuros/metabolismo , Tiazolidinas/farmacologíaRESUMEN
A capillary electrophoresis method with capacitively coupled contactless conductivity detection (CE-C(4)D) has been developed, optimized and validated for the determination of ciprofloxacin. Ciprofloxacin is a member of the fluoroquinolone antibiotics with a broad spectrum bactericidal activity and recommended for complicated respiratory infections, sexually transmitted diseases, tuberculosis, bacterial diarrhea etc. Method development was conducted with major focus on the quality by design (QbD) approach. During method development, multiple buffers were tried at different ionic strength. However, the optimized method finally involved a very simple background electrolyte, monosodium citrate at a concentration of 10mM without pH adjustment. The optimized CE-C(4)D method involved an uncoated fused silica capillary (59/39cm, 50µm i.d.) and hydrodynamic sample injection at a pressure of 0.5 p.s.i. for 5s. The actual separation was conducted for 10min at normal polarity with a voltage of 20kV corresponding to 5.9µA current. LiCl (1mg/mL) was used as an internal standard. The optimized method is robust and accurate (recovery >98%) which rendered the ciprofloxacin peak within five minutes with good linearity (R(2)>0.999) in the concentration range of 0.0126-0.8mg/mL. The repeatability is expressed by percentage relative standard deviation (%RSD) of the relative peak areas (RPA) and it showed good repeatability both intra-day (<3%) and inter-day (3.1%). This method, proven to be free of matrix interference, showed that the estimated percent content of ciprofloxacin (102%) was within the official requirements. Moreover, due to its ease of use and robustness, the method should also be applicable in less well controlled laboratory environments.