Implementation of Novel Affinity Ligand for Lentiviral Vector Purification.

The use of viral vectors as therapeutic products for multiple applications such as vaccines, cancer treatment, or gene therapies, has been growing exponentially. Therefore, improved manufacturing processes are needed to cope with the high number of functional particles required for clinical trials and, eventually, commercialization. Affinity chromatography (AC) can be used to simplify purification processes and generate clinical-grade products with high titer and purity. However, one of the major challenges in the purification of Lentiviral vectors (LVs) using AC is to combine a highly specific ligand with a gentle elution condition assuring the preservation of vector biological activity. In this work, we report for the first time the implementation of an AC resin to specifically purify VSV-G pseudotyped LVs. After ligand screening, different critical process parameters were assessed and optimized. A dynamic capacity of 1 × 1011 total particles per mL of resin was determined and an average recovery yield of 45% was found for the small-scale purification process. The established AC robustness was confirmed by the performance of an intermediate scale providing an infectious particles yield of 54%, which demonstrates the scalability and reproducibility of the AC matrix. Overall, this work contributes to increasing downstream process efficiency by delivering a purification technology that enables high purity, scalability, and process intensification in a single step, contributing to time-to-market reduction.

Extending AAV Packaging Cargo through Dual Co-Transduction: Efficient Protein Trans-Splicing at Low Vector Doses.

Adeno-associated viral (AAV) vectors represent one of the leading platforms for gene delivery. Nevertheless, their small packaging capacity restricts their use for diseases requiring large-gene delivery. To overcome this, dual-AAV vector systems that rely on protein trans-splicing were developed, with the split-intein Npu DnaE among the most-used. However, the reconstitution efficiency of Npu DnaE is still insufficient, requiring higher vector doses. In this work, two split-inteins, Cfa and Gp41-1, with reportedly superior trans-splicing were evaluated in comparison with Npu DnaE by transient transfections and dual-AAV in vitro co-transductions. Both Cfa and Gp41-1 split-inteins enabled reconstitution rates that were over two-fold higher than Npu DnaE and 100% of protein reconstitution. The impact of different vector preparation qualities in split-intein performances was also evaluated in co-transduction assays. Higher-quality preparations increased split-inteins' performances by three-fold when compared to low-quality preparations (60-75% vs. 20-30% full particles, respectively). Low-quality vector preparations were observed to limit split-gene reconstitutions by inhibiting co-transduction. We show that combining superior split-inteins with higher-quality vector preparations allowed vector doses to be decreased while maintaining high trans-splicing rates. These results show the potential of more-efficient protein-trans-splicing strategies in dual-AAV vector co-transduction, allowing the extension of its use to the delivery of larger therapeutic genes.

Downstream processing for influenza vaccines and candidates: An update.

Seasonal and pandemic influenza outbreaks present severe health and economic burdens. To overcome limitations on influenza vaccines' availability and effectiveness, researchers chase universal vaccines providing broad, long-lasting protection against multiple influenza subtypes, and including pandemic ones. Novel influenza vaccine designs are under development, in clinical trials, or reaching the market, namely inactivated, or live-attenuated virus, virus-like particles, or recombinant antigens, searching for improved effectiveness; all these bring downstream processing (DSP) new challenges. Having to deal with new influenza strains, including pandemics, requires shorter development time, driving the development of faster bioprocesses. To cope with better upstream processes, new regulatory demands for quality and safety, and cost reduction requirements, new unit operations and integrated processes are increasing DSP efficiency for novel vaccine formats. This review covers recent advances in DSP strategies of different influenza vaccine formats. Focus is given to the improvements on relevant state-of-the-art unit operations, from harvest and clarification to purification steps, ending with sterile filtration and formulation. The development of more efficient unit operations to cope with biophysical properties of the new candidates is discussed: emphasis is given to the design of new stationary phases, 3D printing approaches, and continuous processing tools, such as continuous chromatography. The impact of the production platforms and vaccine designs on the downstream operations for the different influenza vaccine formats approved for this season are highlighted.

Oncolytic virus purification with periodic counter-current chromatography.

Virus-based biologicals are one of the most promising biopharmaceuticals of the 21st century medicine and play a significant role in the development of innovative therapeutic, prophylactic, and clinical applications. Oncolytic virus manufacturing scale can range from 5 L in research and development up to 50 L for clinical studies and reach hundreds of liters for commercial scale. The inherent productivity and high integration potential of periodic counter-current chromatography (PCC) offer a transversal solution to decrease equipment footprint and the reduction of several non-value-added unit operations. We report on the design of an efficient PCC process applied to the intermediate purification of oncolytic adenovirus. The developed ion-exchange chromatographic purification method was carried out using a four-column setup for three different scenarios: (i) variation in the feedstock, (ii) potential use of a post-load washing step to improve virus recovery, and (iii) stability during extended operation. Obtained virus recoveries (57%-86%) and impurity reductions (>80% DNA, and >70% total protein) match or overcome batch purification. Regarding process stability and automation, our results show that not only the dynamic control strategy used is able to suppress perturbations in the sample inlet but also allows for unattended operation in the case of ion exchange capture.

Effects of tumour necrosis factor-alpha and interleukin-1 beta on in vitro development of bovine secondary follicles.

The objective of this study was to determine the effects of TNF-α and IL-1ß on development and survival of bovine secondary follicle culture in vitro for 18 days. Secondary follicles (~0.2 mm) were isolated from ovarian cortex and individually cultured at 38.5°C, with 5% CO2 in air, for 18 days, in TCM-199+ alone (cultured control) or supplemented with 10 ng/ml IL-1ß, 10 ng/ml TNF-α or both TNF-α and IL-1ß. The effects of these treatments on growth, follicular survival, antrum formation, viability, ultrastructure and mRNA levels for GDF-9, c-MOS, H1foo and Cyclin B1 were evaluated. The results showed that addition of TNF-α to culture medium increased follicular diameter and rate of antrum formation, whereas that of IL-1ß and a mixture of IL-1ß and TNF-α did not do so. Ultrastructural analysis showed that, among the tested cytokine treatments, follicles cultured in the presence of TNF-α had the best-preserved oocytes and granulosa cells. The presence of TNF-α, IL-1ß or both did not influence the expression of mRNAs analysed. In conclusion, in contrast to IL-1ß, TNF-α promotes growth of and antrum formation in in vitro cultured bovine secondary follicles, while their ultrastructure and viability were maintained.

Purification of influenza virus-like particles using sulfated cellulose membrane adsorbers.

BACKGROUND: Vaccines based on virus-like particles (VLPs) are an alternative to inactivated viral vaccines that combine good safety profiles with strong immunogenicity. In order to be economically competitive, efficient manufacturing is required, in particular downstream processing, which often accounts for major production costs. This study describes the optimization and establishment of a chromatography capturing technique using sulfated cellulose membrane adsorbers (SCMA) for purification of influenza VLPs. RESULTS: Using a design of experiments approach, the critical factors for SCMA performance were described and optimized. For optimal conditions (membrane ligand density: 15.4 µmol cm-2, salt concentration of the loading buffer: 24 mmol L-1 NaCl, and elution buffer: 920 mmol L-1 NaCl, as well as the corresponding flow rates: 0.24 and 1.4 mL min-1), a yield of 80% in the product fraction was obtained. No loss of VLPs was detected in the flowthrough fraction. Removal of total protein and DNA impurities were higher than 89% and 80%, respectively. CONCLUSION: Use of SCMA represents a significant improvement compared with conventional ion exchanger membrane adsorbers. As the method proposed is easily scalable and reduces the number of steps required compared with conventional purification methods, SCMA could qualify as a generic platform for purification of VLP-based influenza vaccines. © 2017 The Authors. Journal of Chemical Technology & Biotechnology published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Bioorthogonal Strategy for Bioprocessing of Specific-Site-Functionalized Enveloped Influenza-Virus-Like Particles.

Virus-like particles (VLPs) constitute a promising platform in vaccine development and targeted drug delivery. To date, most applications use simple nonenveloped VLPs as human papillomavirus or hepatitis B vaccines, even though the envelope is known to be critical to retain the native protein folding and biological function. Here, we present tagged enveloped VLPs (TagE-VLPs) as a valuable strategy for the downstream processing and monitoring of the in vivo production of specific-site-functionalized enveloped influenza VLPs. This two-step procedure allows bioorthogonal functionalization of azide-tagged nascent influenza type A hemagglutinin proteins in the envelope of VLPs through a strain-promoted [3 + 2] alkyne-azide cycloaddition reaction. Importantly, labeling does not influence VLP production and allows for construction of functionalized VLPs without deleterious effects on their biological function. Refined discrimination and separation between VLP and baculovirus, the major impurity of the process, is achieved when this technique is combined with flow cytometry analysis, as demonstrated by atomic force microscopy. TagE-VLPs is a versatile tool broadly applicable to the production, monitoring, and purification of functionalized enveloped VLPs for vaccine design trial runs, targeted drug delivery, and molecular imaging.

Improved virus purification processes for vaccines and gene therapy.

The downstream processing of virus particles for vaccination or gene therapy is becoming a critical bottleneck as upstream titers keep improving. Moreover, the growing pressure to develop cost-efficient processes has brought forward new downstream trains. This review aims at analyzing the state-of-the-art in viral downstream purification processes, encompassing the classical unit operations and their recent developments. Emphasis is given to novel strategies for process intensification, such as continuous or semi-continuous systems based on multicolumn technology, opening up process efficiency. Process understanding in the light of the pharmaceutical quality by design (QbD) initiative is also discussed. Finally, an outlook of the upcoming breakthrough technologies is presented.

Carboxylesterase 2 production and characterization in human cells: new insights into enzyme oligomerization and activity.

Carboxylesterase 2 (CES2), the main carboxylesterase expressed in human intestine, is an increasingly important enzyme in anti-cancer combined therapies for the treatment of different pathologies like colon adenocarcinoma and malignant glioma. The production of human recombinant CES2, in human embryonic kidney cells (HEK-293T cells) using serum-free media, is herein described. CES2 secretion to the media was achieved by the simple addition of an in-frame C-terminal 10× histidine tag (CES2-10xHis) without the need of addition of extra N-terminal signalling sequences or the mutation or deletion of the C-terminal HTEL motif responsible for retaining the protein in the lumen of endoplasmic reticulum. This secretion allowed a fourfold increase in CES2 production. The characterization of human recombinant CES2 showed that this protein exists in other active and inactive forms than the described 60 kDa monomer.

Efficient adeno-associated virus serotype 5 capture with affinity functionalized nanofiber adsorbents.

Adeno-associated viruses (AAVs) are one of the most promising tools for gene therapy applications. These vectors are purified using affinity and ion exchange chromatography, typically using packed beds of resin adsorbents. This leads to diffusion and pressure drop limitations that affect process productivity. Due to their high surface area and porosity, electrospun nanofiber adsorbents offer mass transfer and flow rate advantages over conventional chromatographic media. The present work investigated the use of affinity cellulose-based nanofiber adsorbents for adeno-associated virus serotype 5 (AAV5) capture, evaluating dynamic binding capacity, pressure drop, and AAV5 recovery at residence times (RT) less than 5 s. The dynamic binding capacity was found to be residence time-dependent, but nevertheless higher than 1.0 × 1014 TP mL-1 (RT = 1.6 s), with a pressure drop variation of 0.14 MPa obtained after loading more than 2,000 column volumes of clarified AAV5 feedstock. The single affinity chromatography purification step using these new affinity adsorbents resulted in 80% virus recovery, with the removal of impurities comparable to that of bead-based affinity adsorbents. The high binding capacity, virus recovery and reduced pressure drop observed at residence times in the sub-minute range can potentially eliminate the need for prior concentration steps, thereby reducing the overall number of unit operations, process time and costs.

Continuous Affinity Purification of Adeno-Associated Virus Using Periodic Counter-Current Chromatography.

Replacing batch unit operations of biopharmaceuticals by continuous manufacturing is a maturing concept, with periodic counter-current chromatography (PCC) favoured to replace batch chromatography. Continuous affinity capture of adeno-associated virus (AAV) using PCC has the potential to cope with the high doses required for AAV therapies thanks to its inherent high throughput. The implementation of continuous AAV affinity capture using a four-column PCC process is described herein. First, elution buffer screening was used to optimize virus recovery. Second, breakthrough curves were generated and described using a mechanistic model, which was later used to characterize the loading zone of the PCC. The experimental runs achieved a stable cyclic steady state yielding virus recoveries in line with the optimized batch process (>82%), with almost a three-fold improvement in productivity. The PCC affinity capture process developed here can bolster further improvements to process economics and manufacturing footprint, thereby contributing to the integrated continuous manufacturing concept.

Bioanalytics for Influenza Virus-Like Particle Characterization and Process Monitoring.

Virus-like particles (VLPs) are excellent platforms for the development of influenza vaccine candidates. Nonetheless, their characterization is challenging due to VLPs' unique biophysical and biochemical properties. To cope with such complexity, multiple analytical techniques have been developed to date (e.g., single-particle analysis, thermal stability, or quantification assays), most of which are rarely used or have been successfully demonstrated for being applicable for virus particle characterization. In this study, several biophysical and biochemical methods have been evaluated for thorough characterization of monovalent and pentavalent influenza VLPs from diverse groups (A and B) and subtypes (H1 and H3) produced in insect cells using the baculovirus expression vector system (IC-BEVS). Particle size distribution and purity profiles were monitored during the purification process using two complementary technologies - nanoparticle tracking analysis (NTA) and tunable resistive pulse sensing (TRPS). VLP surface charge at the selected process pH was also assessed by this last technique. The morphology of the VLP (size, shape, and presence of hemagglutinin spikes) was evaluated using transmission electron microscopy. Circular dichroism was used to assess VLPs' thermal stability. Total protein, DNA, and baculovirus content were also assessed. All VLPs analyzed exhibited similar size ranges (90-115 nm for NTA and 129-141 nm for TRPS), surface charges (average of -20.4 mV), and morphology (pleomorphic particles resembling influenza virus) exhibiting the presence of HA molecules (spikes) uniformly displayed on M1 protein scaffold. Our data shows that HA titers and purification efficiency in terms of impurity removal and thermal stability were observed to be particle dependent. This study shows robustness and generic applicability of the tools and methods evaluated, independent of VLP valency and group/subtype. Thus, they are most valuable to assist process development and enhance product characterization.

AAV process intensification by perfusion bioreaction and integrated clarification.

Adeno-associated viruses (AAVs) demand for clinical trials and approved therapeutic applications is increasing due to this vector's overall success and potential. The high doses associated with administration strategies challenges bioprocess engineers to develop more efficient technologies and innovative strategies capable of increasing volumetric productivity. In this study, alternating tangential flow (ATF) and Tangential Flow Depth filtration (TFDF) techniques were compared as to their potential for 1) implementing a high-cell-density perfusion process to produce AAV8 using mammalian HEK293 cells and transient transfection, and 2) integrating AAV harvest and clarification units into a single step. On the first topic, the results obtained demonstrate that AAV expression improves with a medium exchange strategy. This was evidenced firstly in the small-scale perfusion-mocking study and later verified in the 2 L bioreactor operated in perfusion mode. Fine-tuning the shear rate in ATF and TFDF proved instrumental in maintaining high cell viabilities and, most importantly, enhancing AAV-specific titers (7.6 × 104 VG/cell), i.e., up to 4-fold compared to non-optimized perfusion cultures and 2-fold compared with batch operation mode. Regarding the second objective, TFDF enabled the highest recovery yields during perfusion-based continuous harvest of extracellular virus and lysate clarification. This study demonstrates that ATF and TFDF techniques have the potential to support the production and continuous harvest of AAV, and enable an integrated clarification procedure, contributing to the simplification of operations and improving manufacturing efficiency.

Assessing Multi-Attribute Characterization of Enveloped and Non-Enveloped Viral Particles by Capillary Electrophoresis.

Virus-based biopharmaceutical products are used in clinical applications such as vaccines, gene therapy, and immunotherapy. However, their manufacturing remains a challenge, hampered by the lack of appropriate analytical tools for purification monitoring or characterization of the final product. This paper describes the implementation of a highly sensitive method, capillary electrophoresis (CE)-sodium dodecyl sulfate (SDS) combined with a laser-induced fluorescence (LIF) detector to monitor the impact of various bioprocess steps on the quality of different viral vectors. The fluorescence labelling procedure uses the (3-(2-furoyl) quinoline-2-carboxaldehyde dye, and the CE-SDS LIF method enables the evaluation of in-process besides final product samples. This method outperforms other analytical methods, such as SDS-polyacrylamide gel electrophoresis with Sypro Ruby staining, in terms of sensitivity, resolution, and high-throughput capability. Notably, this CE-SDS LIF method was also successfully implemented to characterize enveloped viruses such as Maraba virus and lentivirus, whose development as biopharmaceuticals is now restricted by the lack of suitable analytical tools. This method was also qualified for quantification of rAAV2 according to the International Council for Harmonisation guidelines. Overall, our work shows that CE-SDS LIF is a precise and sensitive analytical platform for in-process sample analysis and quantification of different virus-based targets, with a great potential for application in biomanufacturing.

Effects of Aloe vera extract on growth, viability, ultrastructure and expression of mRNA for antioxidant enzymes in bovine secondary follicles cultured in vitro.

This study aimed to investigate the effects of Aloe vera extract on follicular growth, viability, ultrastructure, and mRNA levels for superoxide dismutase (SOD), catalase (CAT), glutathione peroxidase 1 (GPX1) and peroxiredoxin 6 (PRDX6) in bovine secondary follicles cultured in vitro. To this end, secondary follicles were mechanically isolated from the ovarian cortex and cultured at 38.5 °C, with 5% CO2 in air, for 18 days in TCM-199+ alone or supplemented with 2.5%, 5.0%, 10.0% and 20.0% Aloe vera extract. Follicular growth, morphology and antrum formation were evaluated every 6 days, while ultrastructure was evaluated at the end of culture. Analysis of viability was performed by calcein-AM and ethidium homodimer-1, while mRNA levels for SOD, CAT, GPX1 and PRDX6 were evaluated by real-time PCR at the end of culture. The results show that follicles cultured with 2.5% Aloe vera had increased the rate of antrum formation, while 2.5% and 5.0% Aloe vera improved follicular viability rate. Follicles cultured with 2.5% and 10.0% Aloe vera increased the levels of mRNA for SOD and GPX1 respectively, but the levels of CAT were reduced in follicles cultured with 2.5%, 5.0%, 10.0% and 20.0%. Additionally, follicles cultured with 2.5% of Aloe vera had their ultrastructure well preserved, while those cultured with 5.0%, 10.0% and 20.0% exhibited increased oocyte vacuolization and damaged organelles. In conclusion, 2.5% Aloe vera increases antrum formation, viability and expression of mRNA for SOD in cultured secondary follicles, but higher concentrations of Aloe vera have negative effects on follicular ultrastructure.

Large-scale production and purification of VLP-based vaccines.

Virus-like particles (VLPs) hold tremendous potential as vaccine candidates. These innovative biopharmaceuticals present the remarkable advantages of closely mimicking the three-dimensional nature of an actual virus while lacking the virus genome packaged inside its capsid. As a result, an equally efficient but safer prophylaxis is anticipated as compared to inactivated or live attenuated viral vaccines. With the advent of successful cases of approved VLP-based vaccines, pharmaceutical companies are indeed redirecting their resources to the development of such products. This paper reviews the current choices and trends of large-scale production and purification of VLP-based vaccines generated through the baculovirus expression vector system using insect cells.

Quality control and analytical methods for baculovirus-based products.

Recombinant baculoviruses (rBac) are used for many different applications, ranging from bio-insecticides to the production of heterologous proteins, high-throughput screening of gene functions, drug delivery, in vitro assembly studies, design of antiviral drugs, bio-weapons, building blocks for electronics, biosensors and chemistry, and recently as a delivery system in gene therapy. Independent of the application, the quality, quantity and purity of rBac-based products are pre-requisites demanded by regulatory authorities for product licensing. To guarantee maximization utility, it is necessary to delineate optimized production schemes either using trial-and-error experimental setups ("brute force" approach) or rational design of experiments by aid of in silico mathematical models (Systems Biology approach). For that, one must define all of the main steps in the overall process, identify the main bioengineering issues affecting each individual step and implement, if required, accurate analytical methods for product characterization. In this review, current challenges for quality control (QC) technologies for up- and down-stream processing of rBac-based products are addressed. In addition, a collection of QC methods for monitoring/control of the production of rBac derived products are presented as well as innovative technologies for faster process optimization and more detailed product characterization.

Advances in Lentivirus Purification.

Lentiviral vectors (LVs) have been increasingly used as a tool for gene and cell therapies since they can stably integrate the genome in dividing and nondividing cells. LV production and purification processes have evolved substantially over the last decades. However, the increasing demands for higher quantities with more restrictive purity requirements are stimulating the development of novel materials and strategies to supply the market with LV in a cost-effective manner. A detailed review of each downstream process unit operation is performed, limitations, strengths, and potential outcomes being covered. Currently, the majority of large-scale LV manufacturing processes are still based on adherent cell culture, although it is known that the industry is migrating fast to suspension cultures. Regarding the purification strategy, it consists of batch chromatography and membrane technology. Nevertheless, new solutions are being created to improve the current production schemes and expand its clinical use.

Current challenges in biotherapeutic particles manufacturing.

Introduction: The development of novel complex biotherapeutics led to new challenges in biopharmaceutical industry. The potential of these particles has been demonstrated by the approval of several products, in the different fields of gene therapy, oncolytic therapy, and tumor vaccines. However, their manufacturing still presents challenges related to the high dosages and purity required.Areas covered: The main challenges that biopharmaceutical industry faces today and the most recent developments in the manufacturing of different biotherapeutic particles are reported here. Several unit operations and downstream trains to purify virus, virus-like particles and extracellular vesicles are described. Innovations on the different purification steps are also highlighted with an eye on the implementation of continuous and integrated processes.Expert opinion: Manufacturing platforms that consist of a low number of unit operations, with higher-yielding processes and reduced costs will be highly appreciated by the industry. The pipeline of complex therapeutic particles is expanding and there is a clear need for advanced tools and manufacturing capacity. The use of single-use technologies, as well as continuous integrated operations, are gaining ground in the biopharmaceutical industry and should be supported by more accurate and faster analytical methods.

Continuous Chromatography Purification of Virus-Based Biopharmaceuticals: A Shortcut Design Method.

Novel biopharmaceutical products, such as vaccines and viral vectors, play a significant role in the development of innovative therapeutic, prophylactic, and clinical applications. However, several challenges are posed when manufacturing these products. The diversity of cell lines and the different physical and chemical properties of these biologicals require the use of different production and processing technologies. Alternative purification strategies that can improve the purification yield, such as continuous chromatography, are regarded nowadays as enabling technologies to overcome some of the bottlenecks in biomanufacturing. This chapter offers a shortcut approach to implement a semi-continuous chromatography purification of hepatitis C virus-like particles produced in insect cells with recombinant baculovirus. Although the purification is based on ion exchange chromatography, the present methodology can be extended to other types of chromatography.