Sustainable utilization of Fe3O4-modified activated lignite for aqueous phosphate removal and ANN modeling.

Lignites are widely available and cost-effective in many countries. Sustainable methods for their utilization drive innovation, potentially advancing environmental sustainability and resource efficiency. In the present study, Fe3O4 (∼25.1 nm) supported on KOH-activated lignite (A-L) displayed 8 times higher phosphate removal than pristine A-L (67.6 mg/g vs. 8.5 mg/g at pH 5, 50 mg of absorbent in 25 mL of 1500 ppm [phosphate]), owing to its abundant Fe3O4 (10 wt% of Fe) nanoparticle content. The removal occurred within ∼2 h, following a pseudo-second-order kinetic model. Across pH levels ranging from 5.0 to 9.0, Fe3O4-A-L's phosphate removal occurs via both chemisorption and precipitation, as evident by kinetic, pH, and XPS analyses. The phosphate adsorption fits better with the Freundlich isotherm. The combined benefits of facile recovery, rapid phosphate uptake, straightforward regeneration, and attractive post-adsorption benefits (e.g., possibly use as a Fe, P-rich fertilizer) make magnetic Fe3O4-A-L a promising candidate for real-world applications. Artificial Neural Network (ANN) modeling indicates an excellent accuracy (R2 = 0.99) in predicting the amount of phosphate removed by Fe3O4-A-L. Sensitivity analysis revealed both temperature and initial concentration as the most influencing factors. Leveraging lignite in environmentally friendly applications not only addresses immediate challenges but also aligns with sustainability goals. The study clearly articulates the potential benefits of utilizing lignite for sustainable phosphate removal and recovery, offering avenues for mitigating environmental concerns while utilizing resources efficiently.

Development of a Highly Selective Ni(II) Chelator in Aqueous Solution.

The design, synthesis, and characterization of a novel Ni(II) chelator SG-20 is reported. SG-20 is selective in binding to Ni(II) versus other metal ions including Cu(II), Fe(II), Co(II), and Zn(II). At pH = 7.1, SG-20 binds Ni(II) with a Kd = 7.0 ± 0.4 µM. Job analysis indicates that SG-20 binds to both Ni(II) and Cu(II) with a 1:1 stoichiometry. Affinity of SG-20 for Ni(II) is pH dependent and decreases upon lowering to pH 4.0. A green solid was isolated from the reaction of SG-20 with NiCl2·6H2O in MeOH and characterized by X-ray photoelectron spectroscopy (XPS), electronic absorption and infrared (IR) spectroscopies, and mass spectrometry. Collectively, XPS and IR analysis revealed Ni-N and Ni-O interactions and a shift in C-O asymmetric and symmetric stretches consistent with Ni binding. Attempts to crystalize a mononuclear complex were unsuccessful, likely due to the Ni-SG-20 complex being in equilibrium with higher order species in solution. However, reaction of SG-20 with NiCl2·6H2O in water followed by slow evaporation yielded green crystals that were characterized by electronic absorption spectroscopy (λmax = 260 nm) and X-ray crystallography. These analyses revealed that SG-20 supports formation of a complex cluster containing six SG-20 ligands, 15 Ni(II), and three Na(I) centers, with two distinct types of Ni atoms in its outer and inner core. The nine Ni atoms present in the inner core were bound by oxo and carbonate bridges, whereas the six Ni atoms present in its outer shell were bound to N, O, and S donor atoms derived from SG-20. Overall, X-ray crystallographic analysis revealed that two chelator arms of SG-20 bind to one Ni(II) ion with an axial aqua ligand, whereas the third arm is free to interact with Ni ions within the central cluster, supporting the goal of Ni capture.

Elemental Composition of Commercially Available Cannabis Rolling Papers.

With the recent legalization of cannabis in multiple jurisdictions and widespread use as a medical treatment, there has been an increased focus on product safety and the potential impacts of contaminants on human health. One factor that has received little attention is the possible exposure to potentially hazardous levels of toxic elements from rolling (smoking) papers. The elemental composition of rolling papers is largely unregulated, with a minority of jurisdictions regulating papers only when they are part of a final cannabis product. This study reports the concentrations of 26 elements in commercially available rolling papers and estimates potential maximum exposures relative to USP232 and ICH Q3D dosages in pharmaceutical compounds. Exposure estimates indicate that the concentrations of several elements in some products, particularly Cu, Cr, and V, may present a potential hazard to frequent users. Several elements, including Ag, Ca, Ba, Cu, Ti, Cr, Sb, and possibly others, are likely present in elevated quantities in some papers due to product design and manufacturing processes. Our results further suggest that Cu-based pigments are used by a number of manufacturers and that regular use of these products might result in exposures as high as 4.5-11 times the maximum exposure limits. Further research to quantify the contribution of rolling papers to elemental exposure under realistic smoking conditions is warranted.

Structure-Dependent Accessibility of Phonon-Coupled Radiative Relaxation Pathways Probed by X-ray-Excited Optical Luminescence.

Rare-earth scheelites represent a diverse family of compounds with multiple degrees of freedom, which enables the incorporation of a wide range of lanthanide color centers. Precise positioning of quantum objects is attainable by the choice of alkali cations and lattice connectivity of polyanion units. Herein, we report the structure-dependent energy transfer and lattice coupling of optical transitions in La3+- and Dy3+-containing scheelite-type double and quadruple molybdates NaLa1-xDyx(MoO4)2 and Na5La1-xDyx(MoO4)4. X-ray excitation of La3+ core states generates excited-state electron-hole pairs, which, upon thermalizing across interconnected REO8 polyhedra in double molybdates, activate a phonon-coupled excited state of Dy3+. A pronounced luminescence band is observed corresponding to optical cooling of the lattice upon preferential radiative relaxation from a "hot" state. In contrast, combined X-ray absorption near-edge structure and X-ray-excited optical luminescence studies reveal that such a lattice coupling mechanism is inaccessible in quadruple molybdates with a greater separation of La3+-Dy3+ centers.

Thermal atomic layer deposition of rhenium nitride and rhenium metal thin films using methyltrioxorhenium.

The growth of rhenium nitride and rhenium metal thin films is presented using atomic layer deposition (ALD) with the precursors methyltrioxorhenium and 1,1-dimethylhydrazine. Saturative, self-limiting growth was determined at 340 °C for pulse times of ≥4.0 s for methyltrioxorhenium and ≥0.1 s for 1,1-dimethylhydrazine. An ALD window was observed from 340 to 350 °C with a growth rate of about 0.60 Å per cycle. Films grown at 340 °C revealed a root mean square surface roughness of 2.7 nm for a 70 nm thick film and possessed a composition of ReN0.14 with low O and C content of 1.6 and 2.6 at%, respectively. Enhanced nucleation on in situ grown TiN, relative to thermal SiO2, enabled a conformality of 98% on high aspect ratio trenched structures. Subjecting the ReN0.14 thin films to thermal or chemical and thermal treatments reduced the nitrogen content to ≤1.6 at%, yielding a film purity of about 96 at% rhenium and resistivities as low as 51 µΩ cm. The Re metal film thicknesses on the trenched structures remained intact during the post-deposition annealing treatments and the films did not delaminate from the substrate surfaces.

Microwave-assisted solid-state synthesis of NaRE(MO4)2 phosphors (RE = La, Pr, Eu, Dy; M = Mo, W).

A synthetic method was developed to enable the microwave-assisted solid-state preparation of double molybdate and double tungstate scheelite-type phosphors of formula NaRE(MO4)2 (RE = La, Pr, Eu, Dy; M = Mo, W). Starting from subgram-scale stoichiometric mixtures of metal carbonates and oxides and with the aid of granular activated charcoal as a microwave susceptor, ternary (NaEu(MO4)2), quaternary (NaLa0.95Eu0.05(MO4)2), and quinary phosphors (NaLa0.95Pr0.025Dy0.025(MO4)2) were obtained upon heating in a countertop microwave oven. The synthesis of crystalline and phase-pure materials required heating times ranging from 18 to 27 min, significantly shorter than those typically encountered in solid-state reactions assisted by conventional heating. Depending on chemical composition, the speed-up factor ranged from 30 to 40. More importantly, photoluminescence studies performed on the compositionally complex quinary molybdate NaLa0.95Pr0.025Dy0.025(MoO4)2 showed that phosphors synthesized using microwave and conventional heating have nearly identical luminescence responses. The synthetic method described in this contribution is robust, fast, simple, and ideally suited for exploratory synthesis and rapid screening of group VI metalate phosphors, as well as for the preparation of binary precursors to these materials (e.g., Na2MoO4 and Na2WO4).